Triglyceride Conversion of Waste Frying Oil up to 98.46% Using Low Concentration K+/CaO Catalysts Derived from Eggshells.

In this study, biodiesel, also known as fatty acid methyl ester (FAME), was synthesized from multi-stage frying waste soybean oil using chicken eggshell-derived CaO and potassium-impregnated K+-CaO heterogeneous catalysts. Potassium-impregnated catalysts (1.25% K+-CaO, 2.5% K+-CaO, and 5% K+-CaO) were developed by treating the calcined waste eggshell powder with KOH in different wt % ratios. The catalysts were characterized using FTIR, XRD, FESEM, EDS, BET, and particle size analysis techniques. Box-Behnken design-based optimization was exploited to optimize the reaction parameters. A maximum yield of 98.46%, calculated via 1H NMR, was achieved following a 5% K+ doping, 12:1 methanol to oil molar ratio, 3% catalyst amount, 180 min reaction time, and 65 °C reaction temperature. The catalyst (5% K+-CaO) responsible for maximum biodiesel production was found to be highly reusable, with a 30.42% conversion decrease in activity after eight cycles of reuse. Gas chromatography was used to determine the composition of FAME produced from different cycles of waste soybean oil. Physicochemical parameters of the synthesized biodiesel were found to be compatible with EN and ASTM standards. This study has shown that the waste eggshell-derived heterogeneous catalysts have significant catalytic activity at relatively low K+ doping and catalyst loading leading to high biodiesel conversion.

Estimation and exposure concentration of trihalomethanes (THMs) and its human carcinogenic risk in supplied pipeline water of Dhaka City, Bangladesh.

Formation of trihalomethanes (THMs) through excessive chlorination in the supplied water and its carcinogenic nature is a public health concern in many parts of the world, including a couple of neighboring countries in Asia. However, the issue was not yet addressed either in the public health policy or in academia in Bangladesh. Therefore, the objectives of this study are to determine the THM concentration in supplied water, its multiple pathways to the human body, and an estimation of resultant carcinogenic risk to urban dwellers in six different regions of Dhaka city. Thirty-one supplied water samples were collected from 31 different water points located in Purana Paltan, Naya Paltan, Kallyanpur, Shyamoli, Malibagh-Rampura, and Panthapath regions in premonsoon time. Total chlorine and chlorine dioxide (ClO2) and trihalomethane (THM) concentration were determined using UV-VIS spectrophotometer; total organic carbon (TOC), total inorganic carbon, and total carbon concentration were measured using TOC analyzer, and chloroform concentration was determined by applying gas chromatography-mass spectroscopy (GC-MS-MS) in the supplied water samples. Research findings indicate that THM concentration exceeded the USEPA acceptable limit (80 ppb) in all regions except Panthapath. Study results showed that carcinogenic risk via ingestion was higher than the USEPA acceptable limit of 10-6. Carcinogenic risk via dermal absorption and inhalation exposure was lower according to USPEA acceptable limit. To conclude, this study represents the current knowledge about THM concentration in supplied pipeline water and adverse health risk, which signifies that regulatory measures should be taken to reduce the THM concentration.

Isolation and characterization of chromium(VI)-reducing bacteria from tannery effluents and solid wastes.

In the present investigation, five novel Cr(VI) reducing bacteria were isolated from tannery effluents and solid wastes and identified as Kosakonia cowanii MKPF2, Klebsiella pneumonia MKPF5, Acinetobacter gerneri MKPF7, Klebsiella variicola MKPF8 and Serratia marcescens MKPF12 by 16S rDNA gene sequence analysis. The maximum tolerance concentration of Cr(VI) as K2Cr2O7 of the bacterial isolates was varying up to 2000 mg/L. Among the investigated bacterial isolates, A. gerneri MKPF7 was best in terms of reduction rate. The optimum temperatures for growth and Cr(VI) reduction by the bacterial isolates were 35 and 40 °C, respectively except A. gerneri MKPF7 which grew and reduced Cr(VI) optimally at 40 °C. The optimum pH for growth and Cr(VI) reduction by K. cowanii MKPF2, A. gerneri MKPF7 and S. marcescens MKPF12 was 7.0 whereas the optimum pH for growth and Cr(VI) reduction by K. pneumoniae MKPF5 and K. variicola MKPF8 were 7.0, 8.0 and 6.0, 7.0, respectively. All the bacterial isolates showed maximum tolerance against Ni2+ and Zn2+ whereas minimum tolerance was observed against Hg2+ and Cd2+. The bacteria isolated in the present study thus can be used as eco-friendly biological expedients for the remediation and detoxification of Cr(VI) from the contaminated environments.

Heavy Metal Contents and Physical Parameters of Aegiceras corniculatum, Brassica juncea, and Litchi chinensis Honeys from Bangladesh.

The present study was undertaken to determine the heavy metal levels and the physicochemical parameters (pH, electrical conductivity (EC), and ash, moisture, and total sugar content) of honeys from Bangladesh. Three different floral honeys were investigated, namely, khalsi (Aegiceras corniculatum), mustard (Brassica juncea), and litchi (Litchi chinensis) honeys. The heavy metals in the honeys were determined by using a High Temperature Dry Oxidation method followed by Atomic Absorption Spectroscopy. The mean pH, EC, and ash, moisture, and total sugar contents of the investigated honeys were 3.6, 0.51 mS/cm, 0.18%, 18.83%, and 68.30%, respectively. Iron was the most abundant among all the investigated heavy metals, ranging from 13.51 to 15.44 mg/kg. The mean concentrations of Mn and Zn in the investigated honeys were 0.28 mg/kg and 2.99 mg/kg, respectively. Cd was below the detection limit, and lead was found in some honey samples, but their contents were below the recommended Maximum Acceptable Level. Cr was also found in all of the samples, but its concentration was within the limit. The physicochemical analysis of the honey samples yielded levels within the limits set by the international honey legislation, indicating that the honey samples were of good quality and had acceptable values for maturity, purity, and freshness.

Determination of carbamate and organophosphorus pesticides in vegetable samples and the efficiency of gamma-radiation in their removal.

In the present study, the residual pesticide levels were determined in eggplants (Solanum melongena) (n = 16), purchased from four different markets in Dhaka, Bangladesh. The carbamate and organophosphorus pesticide residual levels were determined by high performance liquid chromatography (HPLC), and the efficiency of gamma radiation on pesticide removal in three different types of vegetables was also studied. Many (50%) of the samples contained pesticides, and three samples had residual levels above the maximum residue levels determined by the World Health Organisation. Three carbamates (carbaryl, carbofuran, and pirimicarb) and six organophosphates (phenthoate, diazinon, parathion, dimethoate, phosphamidon, and pirimiphos-methyl) were detected in eggplant samples; the highest carbofuran level detected was 1.86 mg/kg, while phenthoate was detected at 0.311 mg/kg. Gamma radiation decreased pesticide levels proportionately with increasing radiation doses. Diazinon, chlorpyrifos, and phosphamidon were reduced by 40-48%, 35-43%, and 30-45%, respectively, when a radiation strength of 0.5 kGy was utilized. However, when the radiation dose was increased to 1.0 kGy, the levels of the pesticides were reduced to 85-90%, 80-91%, and 90-95%, respectively. In summary, our study revealed that pesticide residues are present at high amounts in vegetable samples and that gamma radiation at 1.0 kGy can remove 80-95% of some pesticides.