Colossal Ferroelectric Photovoltaic Effect in Inequivalent Double-Perovskite Bi2FeMnO6 Thin Films.

Double perovskite films have been extensively studied for ferroelectric order, ferromagnetic order, and photovoltaic effects. The customized ion combinations and ordered ionic arrangements provide unique opportunities for bandgap engineering. Here, a synergistic strategy to induce chemical strain and charge compensation through inequivalent element substitution is proposed. A-site substitution of the barium ion is used to modify the chemical valence and defect density of the two B-site elements in Bi2FeMnO6 double perovskite epitaxial thin films. We dramatically increased the ferroelectric photovoltaic effect to ∼135.67 µA/cm2 from 30.62 µA/cm2, which is the highest in ferroelectric thin films with a thickness of less than 100 nm under white-light LED irradiation. More importantly, the ferroelectric polarization can effectively improve the photovoltaic efficiency of more than 5 times. High-resolution HAADF-STEM, synchrotron-based X-ray diffraction and absorption spectroscopy, and DFT calculations collectively demonstrate that inequivalent ion plays a dual role of chemical strain (+1.92 and -1.04 GPa) and charge balance, thereby introducing lattice distortion effects. The reduction of the oxygen vacancy density and the competing Jahn-Teller distortion of the oxygen octahedron are the main phenomena of the change in electron-orbital hybridization, which also leads to enhanced ferroelectric polarization values and optical absorption. The inequivalent strategy can be extended to other double perovskite systems and applied to other functional materials, such as photocatalysis for efficient defect control.

Giant tunnelling electroresistance in atomic-scale ferroelectric tunnel junctions.

Ferroelectric tunnel junctions are promising towards high-reliability and low-power non-volatile memories and computing devices. Yet it is challenging to maintain a high tunnelling electroresistance when the ferroelectric layer is thinned down towards atomic scale because of the ferroelectric structural instability and large depolarization field. Here we report ferroelectric tunnel junctions based on samarium-substituted layered bismuth oxide, which can maintain tunnelling electroresistance of 7 × 105 with the samarium-substituted bismuth oxide film down to one nanometer, three orders of magnitude higher than previous reports with such thickness, owing to efficient barrier modulation by the large ferroelectric polarization. These ferroelectric tunnel junctions demonstrate up to 32 resistance states without any write-verify technique, high endurance (over 5 × 109), high linearity of conductance modulation, and long retention time (10 years). Furthermore, tunnelling electroresistance over 109 is achieved in ferroelectric tunnel junctions with 4.6-nanometer samarium-substituted bismuth oxide layer, which is higher than commercial flash memories. The results show high potential towards multi-level and reliable non-volatile memories.

Record high room temperature resistance switching in ferroelectric-gated Mott transistors unlocked by interfacial charge engineering.

The superior size and power scaling potential of ferroelectric-gated Mott transistors makes them promising building blocks for developing energy-efficient memory and logic applications in the post-Moore's Law era. The close to metallic carrier density in the Mott channel, however, imposes the bottleneck for achieving substantial field effect modulation via a solid-state gate. Previous studies have focused on optimizing the thickness, charge mobility, and carrier density of single-layer correlated channels, which have only led to moderate resistance switching at room temperature. Here, we report a record high nonvolatile resistance switching ratio of 38,440% at 300 K in a prototype Mott transistor consisting of a ferroelectric PbZr0.2Ti0.8O3 gate and an RNiO3 (R: rare earth)/La0.67Sr0.33MnO3 composite channel. The ultrathin La0.67Sr0.33MnO3 buffer layer not only tailors the carrier density profile in RNiO3 through interfacial charge transfer, as corroborated by first-principles calculations, but also provides an extended screening layer that reduces the depolarization effect in the ferroelectric gate. Our study points to an effective material strategy for the functional design of complex oxide heterointerfaces that harnesses the competing roles of charge in field effect screening and ferroelectric depolarization effects.

Self-Enhancement of Water Electrolysis by Electrolyte-Poled Ferroelectric Catalyst.

Efficient and durable electrocatalysts with superior activity are needed for the production of green hydrogen with a high yield and low energy consumption. Electrocatalysts based on transition metal oxides hold dominance due to their abundant natural resources, regulable physical properties, and good adaptation to a solution. In numerous oxide catalyst materials, ferroelectrics, possessing semiconducting characteristics and switchable spontaneous polarization, have been considered promising photoelectrodes for solar water splitting. However, few investigations noted their potential as electrocatalysts. In this study, we report an efficient electrocatalytic electrode made of a BiFeO3/nickel foam heterostructure, which displays a smaller overpotential and higher current density than the blank nickel foam electrode. Moreover, when in contact with an alkaline solution, the bond between hydroxyls and the BiFeO3 surface induces a large area of upward self-polarization, lowering the adsorption energy of subsequent adsorbates and facilitating oxygen and hydrogen evolution reaction. Our work demonstrates an infrequent pathway of using functional semiconducting materials for exploiting highly efficient electrocatalytic electrodes.

Excitonic insulator to superconductor phase transition in ultra-compressed helium.

Helium, the second most abundant element in the universe, exhibits an extremely large electronic band gap of about 20 eV at ambient pressures. While the metallization pressure of helium has been accurately determined, thus far little attention has been paid to the specific mechanisms driving the band-gap closure and electronic properties of this quantum crystal in the terapascal regime (1 TPa = 10 Mbar). Here, we employ density functional theory and many-body perturbation calculations to fill up this knowledge gap. It is found that prior to reaching metallicity helium becomes an excitonic insulator (EI), an exotic state of matter in which electrostatically bound electron-hole pairs may form spontaneously. Furthermore, we predict metallic helium to be a superconductor with a critical temperature of ≈ 20 K just above its metallization pressure and of ≈ 70 K at 100 TPa. These unforeseen phenomena may be critical for improving our fundamental understanding and modeling of celestial bodies.

Anion-induced robust ferroelectricity in sulfurized pseudo-rhombohedral epitaxial BiFeO3 thin films via polarization rotation.

Polarization rotation caused by various strains, such as substrate and/or chemical strain, is essential to control the electronic structure and properties of ferroelectric materials. This study proposes anion-induced polarization rotation with chemical strain, which effectively improves ferroelectricity. A method for the sulfurization of BiFeO3 thin films by introducing sulfur anions is presented. The sulfurized films exhibited substantial enhancement in room-temperature ferroelectric polarization through polarization rotation and distortion, with a 170% increase in the remnant polarization from 58 to 100.7 µC cm-2. According to first-principles calculations and the results of X-ray absorption spectroscopy and high-angle annular dark-field scanning transmission electron microscopy, this enhancement arose from the introduction of S atoms driving the re-distribution of the lone-pair electrons of Bi, resulting in the rotation of the polarization state from the [001] direction to the [110] or [111] one. The presented method of anion-driven polarization rotation might enable the improvement of the properties of oxide materials.

Ferroelectricity in layered bismuth oxide down to 1 nanometer.

Atomic-scale ferroelectrics are of great interest for high-density electronics, particularly field-effect transistors, low-power logic, and nonvolatile memories. We devised a film with a layered structure of bismuth oxide that can stabilize the ferroelectric state down to 1 nanometer through samarium bondage. This film can be grown on a variety of substrates with a cost-effective chemical solution deposition. We observed a standard ferroelectric hysteresis loop down to a thickness of ~1 nanometer. The thin films with thicknesses that range from 1 to 4.56 nanometers possess a relatively large remanent polarization from 17 to 50 microcoulombs per square centimeter. We verified the structure with first-principles calculations, which also pointed to the material being a lone pair-driven ferroelectric material. The structure design of the ultrathin ferroelectric films has great potential for the manufacturing of atomic-scale electronic devices.

Fully Optical Modulation of the Two-Dimensional Electron Gas at the γ-Al2O3/SrTiO3 Interface.

Two-dimensional electron gas (2DEG) formed at the heterointerface between two oxide insulators hosts plenty of emergent phenomena and provides new opportunities for electronics and photoelectronics. However, despite being long sought after, on-demand properties controlled through a fully optical illumination remain far from being explored. Herein, a giant tunability of the 2DEG at the interface of γ-Al2O3/SrTiO3 through a fully optical gating is discovered. Specifically, photon-generated carriers lead to a delicate tunability of the carrier density and the underlying electronic structure, which is accompanied by the remarkable Lifshitz transition. Moreover, the 2DEG can be optically tuned to possess a maximum Rashba spin-orbit coupling, particularly at the crossing region of the sub-bands with different symmetries. First-principles calculations essentially well explain the optical modulation of γ-Al2O3/SrTiO3. Our fully optical gating opens a new pathway for manipulating emergent properties of the 2DEGs and is promising for on-demand photoelectric devices.

High thermoelectric performance enabled by convergence of nested conduction bands in Pb7Bi4Se13 with low thermal conductivity.

Thermoelectrics enable waste heat recovery, holding promises in relieving energy and environmental crisis. Lillianite materials have been long-term ignored due to low thermoelectric efficiency. Herein we report the discovery of superior thermoelectric performance in Pb7Bi4Se13 based lillianites, with a peak figure of merit, zT of 1.35 at 800 K and a high average zT of 0.92 (450-800 K). A unique quality factor is established to predict and evaluate thermoelectric performances. It considers both band nonparabolicity and band gaps, commonly negligible in conventional quality factors. Such appealing performance is attributed to the convergence of effectively nested conduction bands, providing a high number of valley degeneracy, and a low thermal conductivity, stemming from large lattice anharmonicity, low-frequency localized Einstein modes and the coexistence of high-density moiré fringes and nanoscale defects. This work rekindles the vision that Pb7Bi4Se13 based lillianites are promising candidates for highly efficient thermoelectric energy conversion.

Berry Phase Engineering in SrRuO3/SrIrO3/SrTiO3 Superlattices Induced by Band Structure Reconstruction.

The Berry phase, which reveals the intimate geometrical structure underlying quantum mechanics, plays a central role in the anomalous Hall effect. In this work, we observed a sign change of Berry curvatures at the interface between the ferromagnet SrRuO3 (SRO) layer and the SrIrO3 (SIO) layer with strong spin-orbit coupling. The negative Berry curvature at the interface, induced by the strongly spin-orbit-coupled Ir 5d bands near the Fermi level, makes the SRO/SIO interface different from the SRO layer that has a positive Berry curvature. These opposite Berry curvatures led to two anomalous Hall effect (AHE) channels with opposite signs at the SRO/SIO interface and in the SRO layer, respectively, resulting in a hump-like feature in the Hall resistivity loop. This observation offers a straightforward explanation of the hump-like feature that is usually associated with the chiral magnetic structure or magnetic skyrmions. Hence, this study provides evidence to oppose the widely accepted claim that magnetic skyrmions induce the hump-like feature.

Intrinsic asymmetric ferroelectricity induced giant electroresistance in ZnO/BaTiO3 superlattice.

Here, we combine the piezoelectric wurtzite ZnO and the ferroelectric (111) BaTiO3 as a hexagonal closed-packed structure and report a systematic theoretical study on the ferroelectric behavior induced by the interface of ZnO/BaTiO3 films and the transport properties between the SrRuO3 electrodes. The parallel and antiparallel polarizations of ZnO and BaTiO3 can lead to intrinsic asymmetric ferroelectricity in the ZnO/BaTiO3 superlattice. Using first-principles calculations we demonstrate four different configurations for the ZnO/BaTiO3/ZnO superlattice with respective terminations and find one most favorable for the stable existence of asymmetric ferroelectricity in thin films with thickness less than 4 nm. Combining density functional theory calculations with non equilibrium Green's function formalism, we investigate the electron transport properties of SrRuO3/ZnO/BaTiO3/ZnO/SrRuO3 FTJ and SrRuO3/ZnO/BaTiO3/SrRuO3 FTJ, and reveal a high TER effect of 581% and 112% respectively. These findings provide an important insight into the understanding of how the interface affects the polarization in the ZnO/BaTiO3 superlattice and may suggest a controllable and unambiguous way to build ferroelectric and multiferroic tunnel junctions.

The complex non-collinear magnetic orderings in Ba2YOsO6: a new approach to tuning spin-lattice interactions and controlling magnetic orderings in frustrated complex oxides.

Frustrated magnets are one class of fascinating materials that host many intriguing phases such as spin ice, spin liquid and complex long-range magnetic orderings at low temperatures. In this work we use first-principles calculations to find that in a wide range of magnetically frustrated oxides, at zero temperature a number of non-collinear magnetic orderings are more stable than the type-I collinear ordering that is observed at finite temperatures. The emergence of non-collinear orderings in those complex oxides is due to higher-order exchange interactions that originate from second-row and third-row transition metal elements. This implies a collinear-to-noncollinear spin transition at sufficiently low temperatures in those frustrated complex oxides. Furthermore, we find that in a particular oxide Ba2YOsO6, experimentally feasible uniaxial strain can tune the material between two different non-collinear magnetic orderings. Our work predicts new non-collinear magnetic orderings in frustrated complex oxides at very low temperatures and provides a mechanical route to tuning complex non-collinear magnetic orderings in those materials.

Solid-State Synapse Based on Magnetoelectrically Coupled Memristor.

Brain-inspired computing architectures attempt to emulate the computations performed in the neurons and the synapses in the human brain. Memristors with continuously tunable resistances are ideal building blocks for artificial synapses. Through investigating the memristor behaviors in a La0.7Sr0.3MnO3/BaTiO3/La0.7Sr0.3MnO3 multiferroic tunnel junction, it was found that the ferroelectric domain dynamics characteristics are influenced by the relative magnetization alignment of the electrodes, and the interfacial spin polarization is manipulated continuously by ferroelectric domain reversal, enriching our understanding of the magnetoelectric coupling fundamentally. This creates a functionality that not only the resistance of the memristor but also the synaptic plasticity form can be further manipulated, as demonstrated by the spike-timing-dependent plasticity investigations. Density functional theory calculations are carried out to describe the obtained magnetoelectric coupling, which is probably related to the Mn-Ti intermixing at the interfaces. The multiple and controllable plasticity characteristic in a single artificial synapse, to resemble the synaptic morphological alteration property in a biological synapse, will be conducive to the development of artificial intelligence.

A Metal-Insulator Transition of the Buried MnO2 Monolayer in Complex Oxide Heterostructure.

A novel artificially created MnO2 monolayer system is demonstrated in atomically controlled epitaxial perovskite heterostructures. With careful design of different electrostatic boundary conditions, a magnetic transition as well as a metal-insulator transition of the MnO2 monolayer is unveiled, providing a fundamental understanding of dimensionality-confined strongly correlated electron systems and a direction to design new electronic devices.

Structural and Magnetic Properties of Transition-Metal-Doped Zn 1-x Fe x O.

The ability to produce high-quality single-phase diluted magnetic semiconductors (DMS) is the driving factor to study DMS for spintronics applications. Fe-doped ZnO was synthesized by using a low-temperature co-precipitation technique producing Zn 1-x Fe x O nanoparticles (x= 0, 0.02, 0.04, 0.06, 0.08, and 0.1). Structural, Raman, density functional calculations, and magnetic studies have been carried out in studying the electronic structure and magnetic properties of Fe-doped ZnO. The results show that Fe atoms are substituted by Zn ions successfully. Due to the small ionic radius of Fe ions compared to that of a Zn ions, the crystal size decreases with an increasing dopant concentration. First-principle calculations indicate that the charge state of iron is Fe (2+) and Fe (3+) with a zinc vacancy or an interstitial oxygen anion, respectively. The calculations predict that the exchange interaction between transition metal ions can switch from the antiferromagnetic coupling into its quasi-degenerate ferromagnetic coupling by external perturbations. This is further supported and explains the observed ferromagnetic bahaviour at magnetic measurements. Magnetic measurements reveal that decreasing particle size increases the ferromagnetism volume fraction. Furthermore, introducing Fe into ZnO induces a strong magnetic moment without any distortion in the geometrical symmetry; it also reveals the ferromagnetic coupling.

Electrical control of memristance and magnetoresistance in oxide magnetic tunnel junctions.

Electric-field control of magnetic and transport properties of magnetic tunnel junctions has promising applications in spintronics. Here, we experimentally demonstrate a reversible electrical manipulation of memristance, magnetoresistance, and exchange bias in Co/CoO-ZnO/Co magnetic tunnel junctions, which enables the realization of four nonvolatile resistance states. Moreover, greatly enhanced tunneling magnetoresistance of 68% was observed due to the enhanced spin polarization of the bottom Co/CoO interface. The ab initio calculations further indicate that the spin polarization of the Co/CoO interface is as high as 73% near the Fermi level and plenty of oxygen vacancies can induce metal-insulator transition of the CoO(1-v) layer. Thus, the electrical manipulation mechanism on the memristance, magnetoresistance and exchange bias can be attributed to the electric-field-driven migration of oxygen ions/vacancies between very thin CoO and ZnO layers.