Uterine washings as a novel method for early detection of ovarian cancer: Trials and tribulations.

Given the tubal origin of high-grade serous ovarian cancer (HGSC), we sought to investigate intrauterine lavage (IUL) as a novel method of biomarker detection. IUL and serum samples were collected from patients with HGSC or benign pathology. Although CA-125 and HE4 concentrations were significantly higher in IUL samples compared to serum, they were similar between IUL samples from patients with HGSC vs benign conditions. In contrast, CA-125 and HE4 serum concentrations differed between HGSC and benign pathology (P =.002 for both). IUL and tumor samples from patients with HGSC were subjected to targeted panel sequencing and droplet digital PCR (ddPCR). Tumor mutations were found in 75 % of matched IUL samples. Serum CA-125 and HE4 biomarker levels allowed for better differentiation of HGSC and benign pathology compared to IUL samples. We believe using IUL for early detection of HGSC requires optimization, and current strategies should focus on prevention until early detection strategies improve.

Drug-Eluting Rubber Bands for Tissue Ligation.

Rubber band ligation is a commonly used method for the removal of tissue abnormalities. Most often, rubber band ligation is performed to remove internal hemorrhoids unresponsive to first line treatments to avoid surgery. While the procedure is considered safe, patients experience mild to significant pain and discomfort until the tissue sloughs off. As patients often require multiple bandings and sessions, reducing these side effects can have a considerable effect on patient adherence and quality of life. To reduce pain and discomfort, we developed drug-eluting rubber bands for ligation procedures. We investigated the potential for a band to elute anesthetics and drug combinations to durably manage pain for a period of up to 5 days while exhibiting similar mechanical properties to conventional rubber bands. We show that the rubber bands retain their mechanical properties despite significant drug loading. Lidocaine, released from the bands, successfully altered the calcium dynamics of cardiomyocytes in vitro and modulated heart rate in zebrafish embryos, while the bands exhibited lower cytotoxicity than conventional bands. Ex vivo studies demonstrated substantial local drug release in enteric tissues. These latex-free bands exhibited sufficient mechanical and drug-eluting properties to serve both ligation and local analgesic functions, potentially enabling pain reduction for multiple indications.

En route to single-step, two-phase purification of carbon nanotubes facilitated by high-throughput spectroscopy.

Chirality purification of single-walled carbon nanotubes (SWCNTs) is desirable for applications in many fields, but general utility is currently hampered by low throughput. We discovered a method to obtain single-chirality SWCNT enrichment by the aqueous two-phase extraction (ATPE) method in a single step. To achieve appropriate resolution, a biphasic system of non-ionic tri-block copolymer surfactant is varied with an ionic surfactant. A nearly-monochiral fraction of SWCNTs can then be harvested from the top phase. We also found, via high-throughput, near-infrared excitation-emission photoluminescence spectroscopy, that the parameter space of ATPE can be mapped to probe the mechanics of the separation process. Finally, we found that optimized conditions can be used for sorting of SWCNTs wrapped with ssDNA as well. Elimination of the need for surfactant exchange and simplicity of the separation process make the approach promising for high-yield generation of purified single-chirality SWCNT preparations.

Engineering Smart Hybrid Tissues with Built-In Electronics.

One of the major hurdles faced in tissue engineering is the inability to monitor and control the function of an engineered tissue following transplantation. Recent years have seen major developments in the field by integrating electronics within engineered tissues. Previously, the most common types of devices integrated into the body used to be pacemakers and deep brain stimulation electrodes that are stiff and non-compliant; the advent of ultra-thin and flexible electronics has brought forth a significant expansion of the field. Recent developments have enabled interfacing electronics onto, into, and within all tissues and organs with minimal adverse reactions. These have introduced the ability to engineer tissues with built-in electronics that allow for remote monitoring and regulation of tissue function. In this review, we discuss the development of technologies that allowed for the formation of tissue-electronics hybrids and give an overview of the existing examples of these hybrid "cyborg" tissues.

A Stretchable and Flexible Cardiac Tissue-Electronics Hybrid Enabling Multiple Drug Release, Sensing, and Stimulation.

Replacement of the damaged scar tissue created by a myocardial infarction is the goal of cardiac tissue engineering. However, once the implanted tissue is in place, monitoring its function is difficult and involves indirect methods, while intervention necessarily requires an invasive procedure and available medical attention. To overcome this, methods of integrating electronic components into engineered tissues have been recently presented. These allow for remote monitoring of tissue function as well as intervention through stimulation and controlled drug release. Here, an improved hybrid microelectronic tissue construct capable of withstanding the dynamic environment of the beating heart without compromising electronic or mechanical functionality is reported. While the reported system is enabled to sense the function of the engineered tissue and provide stimulation for pacing, an electroactive polymer on the electronics enables it to release multiple drugs in parallel. It is envisioned that the integration of microelectronic devices into engineered tissues will provide a better way to monitor patient health from afar, as well as provide facile, more exact methods to control the healing process.

Gold Nanoparticle-Integrated Scaffolds for Tissue Engineering and Regenerative Medicine.

The development of scaffolding materials that recapitulate the cellular microenvironment and provide cells with physicochemical cues is crucial for successfully engineering functional tissues that can aid in repairing damaged organs. The use of gold nanoparticles for tissue engineering and regenerative medicine has raised great interest in recent years. In this mini review, we describe the shape-dependent properties of gold nanoparticles, and their versatile use in creating tunable nanocomposite scaffolds with improved mechanical and electrical properties for tissue engineering. We further describe using gold nanoparticle-integrated scaffolds to achieve improved stem cells proliferation and differentiation. Finally, we discuss the main challenges and prospects for clinical translation of gold nanoparticles-hybrid scaffolds.

Multifunctional degradable electronic scaffolds for cardiac tissue engineering.

The capability to on-line sense tissue function, provide stimulation to control contractility and efficiently release drugs within an engineered tissue microenvironment may enhance tissue assembly and improve the therapeutic outcome of implanted engineered tissues. To endow cardiac patches with such capabilities we developed elastic, biodegradable, electronic scaffolds. The scaffolds were composed of electrospun albumin fibers that served as both a substrate and a passivation layer for evaporated gold electrodes. Cardiomyocytes seeded onto the electronic scaffolds organized into a functional cardiac tissue and their function was recorded on-line. Furthermore, the electronic scaffolds enabled to actuate the engineered tissue to control its function and trigger the release of drugs. Post implantation, these electronic scaffolds degraded, leading to the dissociation of the inorganic material from within the scaffold. Such technology can be built upon to create a variety of degradable devices for tissue engineering of various tissues, as well as pristine cell-free devices with electronic components for short-term in vivo use.

Cutting-edge platforms in cardiac tissue engineering.

As cardiac disease takes a higher toll with each passing year, the need for new therapies to deal with the scarcity in heart donors becomes ever more pressing. Cardiac tissue engineering holds the promise of creating functional replacement tissues to repair heart tissue damage. In an attempt to bridge the gap between the lab and clinical realization, the field has made major strides. In this review, we will discuss state of the art technologies such as layer-by-layer assembly, bioprinting and bionic tissue engineering, all developed to overcome some of the major hurdles faced in the field.

Cardiac tissue engineering: from matrix design to the engineering of bionic hearts.

The field of cardiac tissue engineering aims at replacing the scar tissue created after a patient has suffered from a myocardial infarction. Various technologies have been developed toward fabricating a functional engineered tissue that closely resembles that of the native heart. While the field continues to grow and techniques for better tissue fabrication continue to emerge, several hurdles still remain to be overcome. In this review we will focus on several key advances and recent technologies developed in the field, including biomimicking the natural extracellular matrix structure and enhancing the transfer of the electrical signal. We will also discuss recent developments in the engineering of bionic cardiac tissues which integrate the fields of tissue engineering and electronics to monitor and control tissue performance.

Modular assembly of thick multifunctional cardiac patches.

In cardiac tissue engineering cells are seeded within porous biomaterial scaffolds to create functional cardiac patches. Here, we report on a bottom-up approach to assemble a modular tissue consisting of multiple layers with distinct structures and functions. Albumin electrospun fiber scaffolds were laser-patterned to create microgrooves for engineering aligned cardiac tissues exhibiting anisotropic electrical signal propagation. Microchannels were patterned within the scaffolds and seeded with endothelial cells to form closed lumens. Moreover, cage-like structures were patterned within the scaffolds and accommodated poly(lactic-co-glycolic acid) (PLGA) microparticulate systems that controlled the release of VEGF, which promotes vascularization, or dexamethasone, an anti-inflammatory agent. The structure, morphology, and function of each layer were characterized, and the tissue layers were grown separately in their optimal conditions. Before transplantation the tissue and microparticulate layers were integrated by an ECM-based biological glue to form thick 3D cardiac patches. Finally, the patches were transplanted in rats, and their vascularization was assessed. Because of the simple modularity of this approach, we believe that it could be used in the future to assemble other multicellular, thick, 3D, functional tissues.

Engineered hybrid cardiac patches with multifunctional electronics for online monitoring and regulation of tissue function.

In cardiac tissue engineering approaches to treat myocardial infarction, cardiac cells are seeded within three-dimensional porous scaffolds to create functional cardiac patches. However, current cardiac patches do not allow for online monitoring and reporting of engineered-tissue performance, and do not interfere to deliver signals for patch activation or to enable its integration with the host. Here, we report an engineered cardiac patch that integrates cardiac cells with flexible, freestanding electronics and a 3D nanocomposite scaffold. The patch exhibited robust electronic properties, enabling the recording of cellular electrical activities and the on-demand provision of electrical stimulation for synchronizing cell contraction. We also show that electroactive polymers containing biological factors can be deposited on designated electrodes to release drugs in the patch microenvironment on demand. We expect that the integration of complex electronics within cardiac patches will eventually provide therapeutic control and regulation of cardiac function.

A new perspective on lysogeny: prophages as active regulatory switches of bacteria.

Unlike lytic phages, temperate phages that enter lysogeny maintain a long-term association with their bacterial host. In this context, mutually beneficial interactions can evolve that support efficient reproduction of both phages and bacteria. Temperate phages are integrated into the bacterial chromosome as large DNA insertions that can disrupt gene expression, and they may pose a fitness burden on the cell. However, they have also been shown to benefit their bacterial hosts by providing new functions in a bacterium-phage symbiotic interaction termed lysogenic conversion. In this Opinion article, we discuss another type of bacterium-phage interaction, active lysogeny, in which phages or phage-like elements are integrated into the bacterial chromosome within critical genes or operons and serve as switches that regulate bacterial genes via genome excision.

Coiled fiber scaffolds embedded with gold nanoparticles improve the performance of engineered cardiac tissues.

Coiled perimysial fibers within the heart muscle provide it with the ability to contract and relax efficiently. Here, we report on a new nanocomposite scaffold for cardiac tissue engineering, integrating coiled electrospun fibers with gold nanoparticles. Cultivation of cardiac cells within the hybrid scaffolds promoted cell organization into elongated and aligned tissues generating a strong contraction force, high contraction rate and low excitation threshold.

Spring-like fibers for cardiac tissue engineering.

Recapitulation of the cellular microenvironment of the heart, which promotes cell contraction, remains a key challenge in cardiac tissue engineering. We report here on our work, where for the first time, a 3-dimensional (3D) spring-like fiber scaffold was fabricated, successfully mimicking the coiled perimysial fibers of the heart. We hypothesized that since in vivo straightening and re-coiling of these fibers allow stretching and contraction of the myocardium in the direction of the cardiomyocytes, such a scaffold can support the assembly of a functional cardiac tissue capable of generating a strong contraction force. In this study, the mechanical properties of both spring-like single fibers and 3D scaffolds composed of them were investigated. The measurements showed that they have increased elasticity and extensibility compared to corresponding straight fibers and straight fiber scaffolds. We have also shown that cardiac cells cultivated on single spring-like fibers formed cell-fiber interactions that induced fiber stretching in the direction of contraction. Moreover, cardiac cells engineered within 3D thick spring-like fiber scaffolds formed a functional tissue exhibiting significantly improved function, including stronger contraction force (p = 0.002), higher beating rate (p < 0.0001) and lower excitation threshold (p = 0.02), compared to straight fiber scaffolds. Collectively, our results suggest that spring-like fibers can play a key role in contributing to the ex vivo formation of a contracting cardiac muscle tissue. We envision that cardiac tissues engineered within these spring-like fiber scaffolds can be used to improve heart function after infarction.

Nanoengineering gold particle composite fibers for cardiac tissue engineering.

Gold nanostructures can be incorporated into macroporous scaffolds to increase the matrix conductivity and enhance the electrical signal transfer between cardiac cells. Here we report a simple approach for fabricating 3-dimensional (3D) gold nanoparticle (NP)-based fibrous scaffolds, for engineering functional cardiac tissues generating a strong contraction force. A polycaprolactone-gelatin mixture was electrospun to obtain fibrous scaffolds with an average fiber diameter of 250 nm. In a facile method, gold NPs were evaporated on the surface of the fibers, creating nanocomposites with a nominal gold thickness of 2, 4, and 14 nm. Compared to pristine scaffolds, cardiac cells seeded on the nano-gold scaffolds assembled into more elongated and aligned tissues. The gold NPs on the fibers were able to maintain the ratio of cardiomyocytes to fibroblasts in the culture, to encourage the growth of cardiomyocytes with significantly higher aspect ratio, and promote massive cardiac sarcomeric actinin expression. Finally, engineering cardiac tissues within gold NP-based scaffolds exhibited significantly higher contraction amplitudes and rates, as compared to scaffolds without gold. We envision that cardiac tissues engineered within these gold NP scaffolds can be used to improve the function of the infarcted heart.