Phenolic compounds induce ferroptosis-like death by promoting hydroxyl radical generation in the Fenton reaction.

Phenolic compounds are industrially versatile chemicals, also the most ubiquitous pollutants. Recently, biosynthesis and biodegradation of phenols has attracted increasing attention, while phenols' toxicity is a major issue. Here, we evolved phloroglucinol-tolerant Escherichia coli strains via adaptive evolution, and three mutations (ΔsodB, ΔclpX and fetAB overexpression) prove of great assistance in the tolerance improvement. We discover that phloroglucinol complexes with iron and promotes the generation of hydroxyl radicals in Fenton reaction, which leads to reducing power depletion, lipid peroxidation, and ferroptosis-like cell death of E. coli. Besides phloroglucinol, various phenols can trigger ferroptosis-like death in diverse organisms, from bacteria to mammalian cells. Furthermore, repressing this ferroptosis-like death improves phloroglucinol production and phenol degradation by corresponding strains respectively, showing great application potential in microbial degradation or production of desired phenolic compounds, and phloroglucinol-induced ferroptosis suppresses tumor growth in mice, indicating phloroglucinol as a promising drug for cancer treatment.

Characterization of an efficient N-oxygenase from Saccharothrix sp. and its application in the synthesis of azomycin.

BACKGROUND: The nitro group constitutes a significant functional moiety within numerous valuable substances, such as nitroimidazoles, a class of antimicrobial drugs exhibiting broad spectrum activity. Conventional chemical methods for synthesizing nitro compounds suffer from harsh conditions, multiple steps, and environmental issues. Biocatalysis has emerged as a promising alternative to overcome these drawbacks, with certain enzymes capable of catalyzing nitro group formation gradually being discovered in nature. Nevertheless, the practical application is hindered by the restricted diversity and low catalytic activity exhibited by the reported nitrifying enzymes. RESULTS: A novel N-oxygenase SaRohS harboring higher catalytic capability of transformation 2-aminoimidazole to azomycin was characterized from Saccharothrix sp. Phylogenetic tree analysis revealed that SaRohS belongs to the heme-oxygenase-like diiron oxygenase (HDOs) family. SaRohS exhibited optimal activity at pH 5.5 and 25 â„ƒ, respectively. The enzyme maintained relatively stable activity within the pH range of 4.5 to 6.5 and the temperature range of 20 â„ƒ to 35 â„ƒ. Following sequence alignment and structural analysis, several promising amino acid residues were meticulously chosen for catalytic performance evaluation. Site-directed mutations showed that threonine 75 was essential for the catalytic activity. The dual mutant enzyme G95A/K115T exhibited the highest catalytic efficiency, which was approximately 5.8-fold higher than that of the wild-type and 22.3-fold higher than that of the reported N-oxygenase KaRohS from Kitasatospora azatica. The underlying catalytic mechanism was investigated through molecular docking and molecular dynamics. Finally, whole-cell biocatalysis was performed and 2-aminoimidazole could be effectively converted into azomycin with a reaction conversion rate of 42% within 14 h. CONCLUSIONS: An efficient N-oxygenase that catalyzes 2-aminoimidazole to azomycin was screened form Saccharothrix sp., its phylogenetics and enzymatic properties were analyzed. Through site-directed mutation, enhancements in catalytic competence were achieved, and the molecular basis underlying the enhanced enzymatic activity of the mutants was revealed via molecular docking and dynamic simulation. Furthermore, the application potential of this enzyme was assessed through whole cell biocatalysis, demonstrating it as a promising alternative method for azomycin production.

Biosynthetic Pathway and Metabolic Engineering of Succinic Acid.

Succinic acid, a dicarboxylic acid produced as an intermediate of the tricarboxylic acid (TCA) cycle, is one of the most important platform chemicals for the production of various high value-added derivatives. As traditional chemical synthesis processes suffer from nonrenewable resources and environment pollution, succinic acid biosynthesis has drawn increasing attention as a viable, more environmentally friendly alternative. To date, several metabolic engineering approaches have been utilized for constructing and optimizing succinic acid cell factories. In this review, different succinic acid biosynthesis pathways are summarized, with a focus on the key enzymes and metabolic engineering approaches, which mainly include redirecting carbon flux, balancing NADH/NAD+ ratios, and optimizing CO2 supplementation. Finally, future perspectives on the microbial production of succinic acid are discussed.

Occurrence, Diversity, and Character of Bacillaceae in the Solid Fermentation Process of Strong Aromatic Liquors.

Strong aromatic liquors, also known as strong aromatic Baijiu (SAB) in China, are manufactured by solid fermentation, with a multi-microbe mixing and cooperative fermentation process that uses Daqu as a brewing starter. Bacillaceae have a specific action in food fermentation, such as soybean and wine, and more recent studies have found Bacillaceae play important roles in the SAB making industry. This review describes the diversity, functionality, and influence of Bacillaceae in Daqu, pit mud, Zaopei, Huangshui within making processes of SAB. Furthermore, aromatic flavor components from the Bacillaceae metabolism of SAB are discussed in this review. Ultimately, the resulting improvements and deeper understanding will benefit practical efforts to apply representatives of Bacillaceae in improving the quality of SAB as well as biological control of the micro-ecological environment of brewing.

A fast and robust iterative genome-editing method based on a Rock-Paper-Scissors strategy.

The production of optimized strains of a specific phenotype requires the construction and testing of a large number of genome modifications and combinations thereof. Most bacterial iterative genome-editing methods include essential steps to eliminate selection markers, or to cure plasmids. Additionally, the presence of escapers leads to time-consuming separate single clone picking and subsequent cultivation steps. Herein, we report a genome-editing method based on a Rock-Paper-Scissors (RPS) strategy. Each of three constructed sgRNA plasmids can cure, or be cured by, the other two plasmids in the system; plasmids from a previous round of editing can be cured while the current round of editing takes place. Due to the enhanced curing efficiency and embedded double check mechanism, separate steps for plasmid curing or confirmation are not necessary, and only two times of cultivation are needed per genome-editing round. This method was successfully demonstrated in Escherichia coli and Klebsiella pneumoniae with both gene deletions and replacements. To the best of our knowledge, this is the fastest and most robust iterative genome-editing method, with the least times of cultivation decreasing the possibilities of spontaneous genome mutations.

Characterization and directed evolution of propionyl-CoA carboxylase and its application in succinate biosynthetic pathway with two CO2 fixation reactions.

Propionyl-CoA carboxylase (PCC) is a promising enzyme in the fields of biological CO2 utilization, synthesis of natrual products, and so on. The activity and substrate specificity of PCC are dependent on its key subunit carboxyltransferase (CT). To obtain PCC with high enzyme activity, seven pccB genes encoding CT subunit from diverse microorganisms were expressed in recombinant E. coli, and PccB from Bacillus subtilis showed the highest activity in vitro. To further optimize this protein using directed evolution, a genetic screening system based on oxaloacetate availability was designed to enrich the active variants of PccBBs. Four amino acid substitutions (D46G, L97Q, N220I and I391T) proved of great assistance in PccBBs activity improvement, and a double mutant of PccBBs (N220I/I391T) showed a 94-fold increase of overall catalytic efficiency indicated by kcat/Km. Moreover, this PccBBs double mutant was applied in construction of new succinate biosynthetic pathway. This new pathway produces succinate from acetyl-CoA with fixation of two CO2 molecules, which was confirmed by isotope labeling experiment with NaH13CO3. Compared with previous succinate production based on carboxylation of phosphoenolpyruvate or pyruvate, this new pathway showed some advantages including higher CO2 fixation potentiality and availability under aerobic conditions. In summary, this study developed a PCC with high enzyme activity which can be widely used in biotechnology field, and also demonstrated the feasibility of new succinate biosynthetic pathway with two CO2 fixation reactions.

Biosynthesis of acetylacetone inspired by its biodegradation.

BACKGROUND: Acetylacetone is a commercially bulk chemical with diverse applications. However, the traditional manufacturing methods suffer from many drawbacks such as multiple steps, harsh conditions, low yield, and environmental problems, which hamper further applications of petrochemical-based acetylacetone. Compared to conventional chemical methods, biosynthetic methods possess advantages such as being eco-friendly, and having mild conditions, high selectivity and low potential costs. It is urgent to develop biosynthetic route for acetylacetone to avoid the present problems. RESULTS: The biosynthetic pathway of acetylacetone was constructed by reversing its biodegradation route, and the acetylacetone was successfully produced by engineered Escherichia coli (E. coli) by overexpression of acetylacetone-cleaving enzyme (Dke1) from Acinetobacter johnsonii. Several promising amino acid residues were selected for enzyme improvement based on sequence alignment and structure analysis, and the acetylacetone production was improved by site-directed mutagenesis of Dke1. The double-mutant (K15Q/A60D) strain presented the highest acetylacetone-producing capacity which is 3.6-fold higher than that of the wild-type protein. Finally, the strain accumulated 556.3 ± 15.2 mg/L acetylacetone in fed-batch fermentation under anaerobic conditions. CONCLUSIONS: This study presents the first intuitive biosynthetic pathway for acetylacetone inspired by its biodegradation, and shows the potential for large-scale production.

Bioactivity and Bactericidal Mechanism of Histidine-Rich ß-Hairpin Peptide Against Gram-Negative Bacteria.

Antibacterial peptides (APMs) are a new type of antibacterial substance. The relationship between their structure and function remains indistinct; in particular, there is a lack of a definitive and fixed template for designing new antimicrobial peptides. Previous studies have shown that porcine Protegrin-1 (PG-1) exhibits considerable antimicrobial activity and cytotoxicity. In this study, to reduce cytotoxicity and increase cell selectivity, we designed histidine-rich peptides based on the sequence template RR(XY)2XDPGX(YX)2RR-NH2, where X represents I, W, V, and F. The results showed that the peptides form more ß-hairpin structures in a lipid-rich environment that mimics cell membranes. Among them, the antimicrobial peptide HV2 showed strong antibacterial activity against Gram-negative strains and almost no toxicity to normal cells. The results of our analysis of its antibacterial mechanism showed that peptide HV2 acts on the bacterial cell membrane to increase its permeability, resulting in cell membrane disruption and death. Furthermore, peptide HV2 inhibited bacterial movement in a concentration-dependent manner and had a more robust anti-inflammatory effect by inhibiting the production of TNF-α. In summary, peptide HV2 exhibits high bactericidal activity and cell selectivity, making it a promising candidate for future use as an antibiotic.

Coupled biosynthesis and esterification of 1,2,4-butanetriol to simplify its separation from fermentation broth.

1,2,4-Butanetriol (BT) is a valuable chemical with versatile applications in many fields and can be produced through biosynthetic pathways. As a trihydric alcohol, BT possesses good water solubility and is very difficult to separate from fermentation broth, which does complicate the production process and increase the cost. To develop a novel method for BT separation, a biosynthetic pathway for 1,2,4-butanetriol esters with poor water solubility was constructed. Wax ester synthase/acyl-coenzyme A: diacylglycerol acyltransferase (Atf) from Acinetobacter baylyi, Mycobacterium smegmatis, and Escherichia coli were screened, and the acyltransferase from A. baylyi (AtfA) was found to have higher capability. The BT producing strain with AtfA overexpression produced 49.5 mg/L BT oleate in flask cultivation. Through enhancement of acyl-CoA production by overexpression of the acyl-CoA synthetase gene fadD and deleting the acyl coenzyme A dehydrogenase gene fadE, the production was improved to 64.4 mg/L. Under fed-batch fermentation, the resulting strain produced up to 1.1 g/L BT oleate. This is the first time showed that engineered E. coli strains can successfully produce BT esters from xylose and free fatty acids.

Biosynthesis of ethylene glycol from d-xylose in recombinant Escherichia coli.

Ethylene glycol (EG) is an important chemical used as antifreeze and a raw material in polyester synthesis. The EG biosynthetic pathway from D-xylose with D-xylonate as key intermediate has some advantages, but showed low EG production. Here, we reconstructed and optimized this pathway in Escherichia coli. In view of the greater intracellular prevalence of NADH, an aldehyde reductase FucO using NADH was employed to convert glycoaldehyde into EG, in replacement of NADPH-dependent reductase YqhD. To suppress the accumulation of by-products acetate and glycolate, two genes arcA and aldA were knocked out. The resultant strain Q2843 produced 72 g/L EG under fed-batch fermentation conditions, with the yield of 0.40 g/g D-xylose and EG productivity of 1.38 g/L/h. The use of NADH-dependent enzyme FucO and by-product elimination significantly improved the performance of EG producing strain, which represented the highest titer, yield and productivity of EG reported so far.

Production of D-lactate from glucose using Klebsiella pneumoniae mutants.

BACKGROUND: D-Lactate is a valued chemical which can be produced by some bacteria including Klebsiella pneumoniae. However, only a few studies have focused on K. pneumoniae for D-lactate production with a significant amount of by-products, which complicated the purification process and decreased the yield of D-lactate. RESULTS: Based on the redirection of carbon towards by-product formation, the effects of single-gene and multiple-gene deletions in K. pneumoniae on D-lactate production from glucose via acetolactate synthase (budB), acetate kinase (ackA), and alcohol dehydrogenase (adhE) were tested. Klebsiella pneumoniae mutants had different production behaviours. The accumulation of the main by-products was decreased in the mutants. The triple mutant strain had the most powerful ability to produce optically pure D-lactate from glucose, and was tested with xylose and arabinose as carbon sources. Fed-batch fermentation was also carried out under various aeration rates, and the strain accumulated 125.1 g/L D-lactate with a yield of 0.91 g/g glucose at 2.5 vvm. CONCLUSIONS: Knocking out by-product synthesis genes had a remarkable influence on the production and yield of D-lactate. This study demonstrated, for the first time, that K. pneumoniae has great potential to convert monosaccharides into D-lactate. The results provide new insights for industrial production of D-lactate by K. pneumoniae.

Enhanced poly(3-hydroxypropionate) production via ß-alanine pathway in recombinant Escherichia coli.

Poly(3-hydroxypropionate) (P3HP) is a thermoplastic with great compostability and biocompatibility, and can be produced through several biosynthetic pathways, in which the glycerol pathway achieved the highest P3HP production. However, exogenous supply of vitamin B12 was required to maintain the activity of glycerol dehydratase, resulting in high production cost. To avoid the addition of VB12, we have previously constructed a P3HP biosynthetic route with ß-alanine as intermediate, and the present study aimed to improve the P3HP production of this pathway. L-aspartate decarboxylase PanD was found to be the rate-limiting enzyme in the ß-alanine pathway firstly. To improve the pathway efficiency, PanD was screened from four different sources (Escherichia coli, Bacillus subtilis, Pseudomonas fluorescens, and Corynebacterium glutamicum). And PanD from C. glutamicum was found to have the highest activity, the P3HP production was improved in flask cultivation with this enzyme. To further improve the production, the host strain was screened and the culture condition was optimized. Under optimal conditions, production and content of P3HP reached to 10.2 g/L and 39.1% (wt/wt [cell dry weight]) in an aerobic fed-batch fermentation. To date, this is the highest P3HP production without VB12.

A novel autolysis system controlled by magnesium and its application to poly (3-hydroxypropionate) production in engineered Escherichia coli.

The release of intracellular products, especially polyhydroxyalkanoates, is still a great challenge in industry. To solve this bottleneck, a novel autolysis system strictly controlled with magnesium was constructed and applied to poly(3-hydroxypropionate) production in engineered Escherichia coli. The autolysis system was constructed by inserting the 5'untranslated region (5'UTR) behind promoter PmgtA with lysis genes (S, R, and Rz, from E. coli) overexpressed. The autolysis system functioned well (lysis efficiency of more than 90%) in the P3HP producer with double plasmids containing lysis genes and P3HP biosynthesis genes, whereas the P3HP production was reduced due to plasmid losses. After the autolysis genes and P3HP biosynthesis genes were integrated into one plasmid, the P3HP content of 72.7% (2.4 times of the control) and the plasmid stability of 79.8 ± 3.1% were achieved in strain Q2646 with promoter PmgtA-UTR. However, the strain Q2647 with promoter PmgtA could not accumulate P3HP because of rapid cell lysis. The novel autolysis system activated in Mg2+-depleted conditions proves to be feasible for polyhydroxyalkanoates production, which may have great application potential for other intracellular products.

Effect of Glycerol Pretreatment on Levoglucosan Production from Corncobs by Fast Pyrolysis.

In this manuscript, glycerol was used in corncobs' pretreatment to promote levoglucosan production by fast pyrolysis first and then was further utilized as raw material for chemicals production by microbial fermentation. The effects of glycerol pretreatment temperatures (220⁻240 °C), time (0.5⁻3 h) and solid-to-liquid ratios (5⁻20%) were investigated. Due to the accumulation of crystalline cellulose and the removal of minerals, the levoglucosan yield was as high as 35.8% from corncobs pretreated by glycerol at 240 for 3 h with a 5% solid-to-liquid ratio, which was obviously higher than that of the control (2.2%). After glycerol pretreatment, the fermentability of the recovered glycerol remaining in the liquid stream from glycerol pretreatment was evaluated by Klebsiella pneumoniae. The results showed that the recovered glycerol had no inhibitory effect on the growth and metabolism of the microbe, which was a promising substrate for fermentation. The value-added applications of glycerol could reduce the cost of biomass pretreatment. Correspondingly, this manuscript offers a green, sustainable, efficient and economic strategy for an integrated biorefinery process.

Recovery Processes of Organic Acids from Fermentation Broths in the Biomass-Based Industry.

The new movement towards green chemistry and renewable feedstocks makes microbial production of chemicals more competitive. Among the numerous chemicals, organic acids are more attractive targets for process development efforts in the renewable-based biorefinery industry. However, most of the production costs in microbial processes are higher than that in chemical processes, among which over 60% are generated by separation processes. Therefore, the research of separation and purification processes is important for a promising biorefinery industry. This review highlights the progress of recovery processes in the separation and purification of organic acids, including their advantages and disadvantages, current situation, and future prospects in terms of recovery yields and industrial application.

Metabolic engineering of Escherichia coli to improve recombinant protein production.

Escherichia coli is one of the most widely used strains for recombinant protein production. However, obstacles also exist in both academic researches and industrial applications, such as the metabolic burden, the carbon source waste, and the cells' physiological deterioration. This article reviews recent approaches for improving recombinant protein production in metabolic engineering, including workhorse selection, stress factor application, and carbon flux regulation. Selecting a suitable host is the first key point for recombinant protein production. In general, it all depends on characteristics of the strains and the target proteins. It will be triggered cells physiological deterioration when the medium is significantly different from the cell's natural environment. Coexpression of stress factors can help proteins to fold into their native conformation. Carbon flux regulation is a direct approach for redirecting more carbon flux toward the desirable pathways and products. However, some undesirable consequences are usually found in metabolic engineering, such as glucose transport inhibition, cell growth retardation, and useless metabolite accumulation. More efficient regulators and platform cell factories should be explored to meet a variety of production demands.

Biosynthesis of poly(3-hydroxypropionate) from glycerol using engineered Klebsiella pneumoniae strain without vitamin B12.

Poly(3-hydroxypropionate) (P3HP) is a biodegradable and biocompatible thermoplastic. Previous studies demonstrated that engineered Escherichia coli strains can produce P3HP with supplementation of expensive vitamin B12. The present study examined the production of P3HP from glycerol in the recombinant Klebsiella pneumoniae strain, which naturally synthesizes vitamin B12. The genes glycerol dehydratase and its reactivation factor (dhaB123, gdrA, and gdrB from K. pneumoniae), aldehyde dehydrogenase (aldH from E. coli) were cloned and expressed in K. pneumoniae to produce 3-hydroxypropionate (3HP), with 2 genes (dhaT and yqhD) for biosynthesis of 1,3-propanediol were deleted. To obtain P3HP production, propionyl-CoA synthetase (prpE from E. coli) and polyhydroxyalkanoate synthase (phaC from Ralstonia eutropha) were introduced. Under the appropriate aeration condition, the cell yield and P3HP content were 0.24 g/L and 12.7% (wt/wt [cell dry weight]) respectively along with 2.03 g/L 3HP after 48 h cultivation. Although the yield is relatively low, this study shows the feasibility of producing P3HP in K. pneumoniae from glycerol without vitamin B12 for the first time. The results also suggest that the aeration conditions should be optimized carefully for the efficient production of P3HP.

Production of optically pure d-lactate from glycerol by engineered Klebsiella pneumoniae strain.

In this study, glycerol was used to produce optically pure d-lactate by engineered Klebsiella pneumoniae strain. In the recombinant strain, d-lactate dehydrogenase LdhA was overexpressed, and two genes, dhaT and yqhD for biosynthesis of main byproduct 1,3-propanediol, were knocked out. To further improve d-lactate production, the culture condition was optimized and the results demonstrated that aeration rate played an important role in d-lactate production. In microaerobic fed-batch fermentation, the engineered strain accumulated 142.1g/L optically pure d-lactate with a yield of 0.82g/g glycerol, which represented the highest d-lactate production from glycerol so far. This study showed that K. pneumoniae strain has high efficiency to convert glycerol into d-lactate and high potentiality in utilization of crude glycerol from biodiesel industry.

Microbial production of sabinene--a new terpene-based precursor of advanced biofuel.

BACKGROUND: Sabinene, one kind of monoterpene, accumulated limitedly in natural organisms, is being explored as a potential component for the next generation of aircraft fuels. And demand for advanced fuels impels us to develop biosynthetic routes for the production of sabinene from renewable sugar. RESULTS: In this study, sabinene was significantly produced by assembling a biosynthetic pathway using the methylerythritol 4-phosphate (MEP) or heterologous mevalonate (MVA) pathway combining the GPP and sabinene synthase genes in an engineered Escherichia coli strain. Subsequently, the culture medium and process conditions were optimized to enhance sabinene production with a maximum titer of 82.18 mg/L. Finally, the fed-batch fermentation of sabinene was evaluated using the optimized culture medium and process conditions, which reached a maximum concentration of 2.65 g/L with an average productivity of 0.018 g h⁻¹ g⁻¹ dry cells, and the conversion efficiency of glycerol to sabinene (gram to gram) reached 3.49%. CONCLUSIONS: This is the first report of microbial synthesis of sabinene using an engineered E. coli strain with the renewable carbon source as feedstock. Therefore, a green and sustainable production strategy has been established for sabinene.