Electro- and photochemical H2 generation by Co(ii) polypyridyl-based catalysts bearing ortho-substituted pyridines.

Cobalt(ii) complexes featuring hexadentate amino-pyridyl ligands have been recently discovered as highly active catalysts for the Hydrogen Evolution Reaction (HER), whose high performance arises from the possibility of assisting proton transfer processes via intramolecular routes involving detached pyridine units. With the aim of gaining insights into such catalytic routes, three new proton reduction catalysts based on amino-polypyridyl ligands are reported, focusing on substitution of the pyridine ortho-position. Specifically, a carboxylate (C2) and two hydroxyl substituted pyridyl moieties (C3, C4) are introduced with the aim of promoting intramolecular proton transfer which possibly enhances the efficiency of the catalysts. Foot-of-the-wave and catalytic Tafel plot analyses have been utilized to benchmark the catalytic performances under electrochemical conditions in acetonitrile using trifluoroacetic acid as the proton source. In this respect, the cobalt complex C3 turns out to be the fastest catalyst in the series, with a maximum turnover frequency (TOF) of 1.6 (±0.5) × 105 s-1, but at the expense of large overpotentials. Mechanistic investigations by means of Density Functional Theory (DFT) suggest a typical ECEC mechanism (i.e. a sequence of reduction - E - and protonation - C - events) for all the catalysts, as previously envisioned for the parent unsubstituted complex C1. Interestingly, in the case of complex C2, the catalytic route is triggered by initial protonation of the carboxylate group resulting in a less common (C)ECEC mechanism. The pivotal role of the hexadentate chelating ligand in providing internal proton relays to assist hydrogen elimination is further confirmed within this novel class of molecular catalysts, thus highlighting the relevance of a flexible polypyridine ligand in the design of efficient cobalt complexes for the HER. Photochemical studies in aqueous solution using [Ru(bpy)3]2+ (where bpy = 2,2'-bipyridine) as the sensitizer and ascorbate as the sacrificial electron donor support the superior performance of C3.

Photobio-electrocatalytic production of H2 using fluorine-doped tin oxide (FTO) electrodes covered with a NiO-In2S3 p-n junction and NiFeSe hydrogenase.

Clean energy vectors are needed towards a fossil fuel-free society, diminishing both greenhouse effect and pollution. Electrochemical water splitting is a clean route to obtain green hydrogen, the cleanest fuel; although efficient electrocatalysts are required to avoid high overpotentials in this process. The combination of inorganic semiconductors with biocatalysts for photoelectrochemical H2 production is an alternative approach to overcome this challenge. N-type semiconductors can be coupled to a co-catalyst for H2 production in the presence of a sacrificial electron donor in solution, but the replacement of the latter with an electrode is a challenge. In this work we attach a NiFeSe-hydrogenase with high activity for H2 production with the n-type semiconductor indium sulfide, which upon visible irradiation is able to transfer its excited electrons to the enzyme. In order to enhance the transfer of the generated holes towards the electrode for their replenishment, we have explored the inclusion of a p-type material, NiO, to induce a p-n junction for H2 production in a photoelectrochemical biocatalytic system in absence of sacrificial reagents.

Hydrogen evolution reaction mediated by an all-sulfur trinuclear nickel complex.

We report the synthesis and the characterization of a trinuclear nickel complex. Solid state and solution studies using X-ray diffraction, NMR and UV-vis spectroscopy highlight the square planar geometries around the metal centers and an all-sulfur coordination sphere. It exhibits significant electrocatalytic activity for hydrogen evolution in DMF using Et3NHCl as the proton source. DFT studies suggest that sulfur atoms act as proton relay, as proposed in [NiFe] hydrogenases.

Ligand-based electronic effects on the electrocatalytic hydrogen production by thiosemicarbazone nickel complexes.

This work reports on the synthesis and characterization of a series of mononuclear thiosemicarbazone nickel complexes that display significant catalytic activity for hydrogen production in DMF using trifluoroacetic acid as the proton source. The ligand framework was chemically modified by varying the electron-donating abilities of the para substituents on the phenyl rings, which was expected to impact the capability of the resulting complexes to reduce protons into hydrogen. Over the four nickel complexes that were obtained, the one with the thiomethyl substituent, NiSCH3, was found to overtake the catalytic performances of the parent complex NiOCH3 featuring lower overpotential values and similar maximum turnover frequencies. These results confirm the electronic effects of the ligand on HER when using thiosemicarbazone nickel complexes and support that chemical modifications can tune the catalytic performances of such systems.

Electrocatalytic Hydrogen Evolution with a Cobalt Complex Bearing Pendant Proton Relays: Acid Strength and Applied Potential Govern Mechanism and Stability.

[Co(bapbpy)Cl]+ (bapbpy: 6,6'-bis(2-aminopyridyl)-2,2'-bipyridine) is a polypyridyl cobalt(II) complex bearing both a redox-active bipyridine ligand and pendant proton relays. This compound catalyzes electro-assisted H2 evolution in DMF with distinct mechanisms depending on the strength of the acid used as the proton source (pKa values ranging from 3.4 to 13.5 in DMF) and the applied potential. Electrochemical studies combining cyclic voltammetry and bulk electrolysis measurements enabled one to bring out four distinct catalytic processes. Where applicable, relevant kinetic information were obtained using either foot-of-the-wave analysis (FOWA) or analytical treatment of bulk electrolysis experiments. Among the different catalytic pathways identified in this study, a clear relationship between the catalyst performances and stability was evidenced. These results draw attention to a number of interesting considerations and may help in the development of future adequately designed catalysts.

A robust ALD-protected silicon-based hybrid photoelectrode for hydrogen evolution under aqueous conditions.

Hydrogen production through direct sunlight-driven water splitting in photo-electrochemical cells (PECs) is a promising solution for energy sourcing. PECs need to fulfill three criteria: sustainability, cost-effectiveness and stability. Here we report an efficient and stable photocathode platform for H2 evolution based on Earth-abundant elements. A p-type silicon surface was protected by atomic layer deposition (ALD) with a 15 nm TiO2 layer, on top of which a 300 nm mesoporous TiO2 layer was spin-coated. The cobalt diimine-dioxime molecular catalyst was covalently grafted onto TiO2 through phosphonate anchors and an additional 0.2 nm ALD-TiO2 layer was applied for stabilization. This assembly catalyzes water reduction into H2 in phosphate buffer (pH 7) with an onset potential of +0.47 V vs. RHE. The resulting current density is -1.3 ± 0.1 mA cm-2 at 0 V vs. RHE under AM 1.5 solar irradiation, corresponding to a turnover number of 260 per hour of operation and a turnover frequency of 0.071 s-1.

Structure of Ni(OH)2 intermediates determines the efficiency of NiO-based photocathodes - a case study using novel mesoporous NiO nanostars.

We report the wet chemical synthesis of mesoporous NiO nanostars (NS) as photocathode material for dye-sensitized solar cells (DSSCs). The growth mechanism of NiO NS as a new morphology of NiO is assessed by TEM and spectroscopic investigations. The NiO NS are obtained upon annealing of preformed ß-Ni(OH)2 into pristine NiO with low defect concentrations and favorable electronic configuration for dye sensitization. The NiO NS consist of fibers self-assembled from nanoparticles yielding a specific surface area of 44.9 m2 g-1. They possess a band gap of 3.83 eV and can be sensitized by molecular photosensitizers bearing a range of anchoring groups, e.g. carboxylic acid, phosphonic acid, and pyridine. The performance of NiO NS-based photocathodes in photoelectrochemical application is compared to that of other NiO morphologies, i.e. nanoparticles and nanoflakes, under identical conditions. Sensitization of NiO NS with the benchmark organic dye P1 leads to p-DSSCs with a high photocurrent up to 3.91 mA cm-2 whilst the photoelectrochemical activity of the NiO NS photocathode in aqueous medium in the presence of an irreversible electron acceptor is reflected by generation of a photocurrent up to 23 µA cm-2.

Hydrogen Evolution from Aqueous Solutions Mediated by a Heterogenized [NiFe]-Hydrogenase Model: Low pH Enables Catalysis through an Enzyme-Relevant Mechanism.

[NiFe]-hydrogenase enzymes are efficient catalysts for H2 evolution but their synthetic models have not been reported to be active under aqueous conditions so far. Here we show that a close model of the [NiFe]-hydrogenase active site can work as a very active and stable heterogeneous H2 evolution catalyst under mildly acidic aqueous conditions. Entry in catalysis is a NiI FeII complex, with electronic structure analogous to the Ni-L state of the enzyme, corroborating the mechanism modification recently proposed for [NiFe]-hydrogenases.

Hydrogen Evolution Reactions Catalyzed by a Bis(thiosemicarbazone) Cobalt Complex: An Experimental and Theoretical Study.

The synthesis and characterization of a dinuclear bis(thiosemicarbazone) cobalt complex [Co2 L2 (NCS)2 ] is reported. This complex exhibits significant catalytic activity for hydrogen production in DMF by using triethylammonium (Et3 NHBF4 ) as the proton source. Cyclic voltammetry data allowed a maximum turnover frequency of 130 s-1 for 1 m proton concentration to be determined. The catalytic nature of the process and the production of dihydrogen were confirmed by gas analysis during controlled potential electrolysis experiments. Quantum chemical calculations show that the complex displays a ligand-assisted metal-centered reactivity and supports a catalytic mechanism involving ligand-based reduction and protonation steps followed by metal-centered processes.

Aqueous Photocurrent Measurements Correlated to Ultrafast Electron Transfer Dynamics at Ruthenium Tris Diimine-Sensitized NiO Photocathodes.

Understanding the structural and electronic factors governing the efficiency of dye-sensitized NiO photocathodes is essential to optimize solar fuel production in photoelectrochemical cells (PECs). For these purpose, three different ruthenium dyes, bearing either two or four methylphosphonate anchoring groups and either a bipyridine or a dipyridophenazine ancillary ligand, were synthesized and grafted onto NiO films. These photoelectrodes were fully characterized by XPS, ToF-SIMS, UV-vis absorption, time-resolved emission and femtosecond transient absorption spectroscopies. Increasing the number of anchoring groups from two to four proved beneficial for the grafting efficiency. No significant modification of the electronic properties compared to the parent photosensitizer was observed, in accordance with the non-conjugated nature of the grafted linker. The photoelectrochemical activity of the dye-sensitized NiO electrodes was assessed in fully aqueous medium in the presence of an irreversible electron acceptor and photocurrents reaching 190 µA.cm-2 were recorded. The transient absorption study revealed the presence of two charge recombination pathways for each of the sensitizers and evidenced a stabilized charge separated state in the dppz derivative, supporting its superior photoelectrochemical activity.

Supramolecular assembly of cobaloxime on nanoring-coated carbon nanotubes: addressing the stability of the pyridine-cobalt linkage under hydrogen evolution turnover conditions.

A carbon nanotube-cobaloxime nanohybrid was prepared through supramolecular assembly of tailored polymerizable amphiphiles, leading to the coordination of cobalt on pyridine-coated nanotubes. This material was used as a catalyst for hydrogen evolution in fully aqueous media. This study provides a definitive asset regarding the stability of the pyridine-cobalt axial bond under H2 evolution turnover conditions.

Experimental and Theoretical Insight into Electrocatalytic Hydrogen Evolution with Nickel Bis(aryldithiolene) Complexes as Catalysts.

A series of neutral and monoanionic nickel dithiolene complexes with p-methoxyphenyl-substituted 1,2-dithiolene ligands have been prepared and characterized with physicochemical methods. Two of the complexes, the monoanion of the symmetric [Ni{S2C2(Ph-p-OCH3)2}2] (3(-)) with NBu4(+) as a counterion and the neutral asymmetric [Ni{S2C2(Ph)(Ph-p-OCH3)}2] (2), have been structurally characterized by single-crystal X-ray crystallography. All complexes have been employed as proton-reducing catalysts in N,N-dimethylformamide with trifluoroacetic acid as the proton source. The complexes are active catalysts with good faradaic yields, reaching 83% for 2 but relatively high overpotential requirements (0.91 and 1.55 V measured at the middle of the catalytic wave for two processes observed depending on the different routes of the mechanism). The similarity of the experimental data regardless of whether the neutral or anionic form of the complexes is used indicates that the neutral form acts as a precatalyst. On the basis of detailed density functional theory calculations, the proposed mechanism reveals two different main routes after protonation of the dianion of the catalyst in accordance with the experimental data, indicating the role of the concentration of the acid and the influence of the methoxy groups. Protonation at sulfur seems be more favorable than that at the metal, which is in marked contrast with the catalytic mechanism proposed for analogous cobalt dithiolene complexes.

Catalytic hydrogen production by a Ni-Ru mimic of NiFe hydrogenases involves a proton-coupled electron transfer step.

A combined electrochemical and theoretical study suggests that hydrogen evolution from weak acids catalyzed by a structural mimic of the active site of NiFe hydrogenases [Ni(xbsms)Ru(C6Me6)Cl](+) proceeds through proton-coupled electron transfer steps.

Tuning the electrocatalytic hydrogen evolution reaction promoted by [Mo2O2S2]-based molybdenum cycles in aqueous medium.

We report the syntheses and characterizations, in the solid state and in solution, of three new cyclic polyoxothiomolybdates self-assembled around 2,5-dimethylterephthalate (DMT) and 2,5-bis(trifluoromethyl)terephthalate (DFMT) ligands, namely [Mo12DMT](2-), [Mo12DFMT](2-) and [Mo16DFMT](2-). A series of these two Mo12-compounds completed by the two Mo12-compounds obtained with 2,3,5,6-tetramethylterephthalate and trimesate ligands offer the opportunity to compare their electro-catalytic properties for reduction of protons into hydrogen. The ability of these compounds to promote the reduction of protons into hydrogen in aqueous medium is evidenced and the influence of the embedded ligand is highlighted, thus allowing proposal of a mechanism for the hydrogen evolution reaction catalyzed by these clusters.

Charge Photo-Accumulation and Photocatalytic Hydrogen Evolution Under Visible Light at an Iridium(III)-Photosensitized Polyoxotungstate.

Steady-state irradiation under visible light of a covalent Ir(III)-photosensitized polyoxotungstate is reported. In the presence of a sacrificial electron donor, the photolysis leads to the very efficient photoreduction of the polyoxometalate. Successive formation of the one-electron and two-electron reduced species, which are unambiguously identified by comparison with spectroelectrochemical measurements, is observed with a significantly faster rate reaction for the formation of the one-electron reduced species. The kinetics of the photoreduction, which are correlated to the reduction potentials of the polyoxometalate (POM), can be finely tuned by the presence of an acid. Indeed light-driven formation of the two-electron reduced POM is considerably facilitated in the presence of acetic acid. The system is also able to perform photocatalytic hydrogen production under visible light without significant loss of performance over more than 1 week of continuous photolysis and displays higher photocatalytic efficiency than the related multi-component system, outlining the decisive effect of the covalent bonding between the POM and the photosensitizer. This functional and modular system constitutes a promising step for the development of charge photoaccumulation devices and subsequent photoelectrocatalysts for artificial photosynthesis.

A Janus cobalt-based catalytic material for electro-splitting of water.

The future of energy supply depends on innovative breakthroughs regarding the design of cheap, sustainable and efficient systems for the conversion and storage of renewable energy sources. The production of hydrogen through water splitting seems a promising and appealing solution. We found that a robust nanoparticulate electrocatalytic material, H(2)-CoCat, can be electrochemically prepared from cobalt salts in a phosphate buffer. This material consists of metallic cobalt coated with a cobalt-oxo/hydroxo-phosphate layer in contact with the electrolyte and mediates H(2) evolution from neutral aqueous buffer at modest overpotentials. Remarkably, it can be converted on anodic equilibration into the previously described amorphous cobalt oxide film (O(2)-CoCat or CoPi) catalysing O(2) evolution. The switch between the two catalytic forms is fully reversible and corresponds to a local interconversion between two morphologies and compositions at the surface of the electrode. After deposition, the noble-metal-free coating thus functions as a robust, bifunctional and switchable catalyst.

Mesoporous α-Fe2O3 thin films synthesized via the sol-gel process for light-driven water oxidation.

This work reports a facile and cost-effective method for synthesizing photoactive α-Fe(2)O(3) films as well as their performances when used as photoanodes for water oxidation. Transparent α-Fe(2)O(3) mesoporous films were fabricated by template-directed sol-gel chemistry coupled with the dip-coating approach, followed by annealing at various temperatures from 350 °C to 750 °C in air. α-Fe(2)O(3) films were characterized by X-ray diffraction, XPS, FE-SEM and electrochemical measurements. The photoelectrochemical performance of α-Fe(2)O(3) photoanodes was characterized and optimized through the deposition of Co-based co-catalysts via different methods (impregnation, electro-deposition and photo-electro-deposition). Interestingly, the resulting hematite films heat-treated at relatively low temperature (500 °C), and therefore devoid of any extrinsic dopant, achieve light-driven water oxidation under near-to-neutral (pH = 8) aqueous conditions after decoration with a Co catalyst. The onset potential is 0.75 V vs. the reversible hydrogen electrode (RHE), thus corresponding to 450 mV light-induced underpotential, although modest photocurrent density values (40 µA cm(-2)) are obtained below 1.23 V vs. RHE. These new materials with a very large interfacial area in contact with the electrolyte and allowing for a high loading of water oxidation catalysts open new avenues for the optimization of photo-electrochemical water splitting.

Rationally designed aptamer-based fluorescence polarization sensor dedicated to the small target analysis.

A direct fluorescence polarization (FP) assay strategy, dedicated to the small molecule sensing and based on the unique induced-fit binding mechanism of end-labelled nucleic acid aptamers, has been recently developed by our group. Small target binding has been successfully converted into a significant increase of the fluorescence anisotropy signal presumably produced by the reduction of the local motional freedom of the dye. In order to generalize the approach, a rational FP sensor methodology was established herein, by engineering instability in the secondary structure of an aptameric recognition element. The anti-adenosine DNA aptamer, labelled by a single fluorescein dye at its 3' extremity, was employed as a model functional nucleic acid probe. The terminal stem of the stem-loop structure was shortened to induce a destabilized/denatured conformation which promoted the local segmental mobility of the dye and then a significant depolarization process. Upon target binding, the structural change of the aptamer induced the formation of a stable stem-loop structure, leading to the reduction of the dye mobility and the increase in the fluorescence anisotropy signal. This reasoned approach was applied to the sensing of adenosine and adenosine monophosphate and their chiral analysis.

Noncompetitive fluorescence polarization aptamer-based assay for small molecule detection.

In this paper, a new fluorescence polarization (FP) assay strategy is described reporting the first demonstration of a noncompetitive FP technique dedicated to the small molecule sensing. This approach was based on the unique induced-fit binding mechanism of nucleic acid aptamers which was exploited to convert the small target binding event into a detectable fluorescence anisotropy signal. An anti-L-tyrosinamide DNA aptamer, labeled by a single fluorescent dye at its extremity, was employed as a model functional nucleic acid probe. The DNA conformational change generated by the L-tyrosinamide binding was able to induce a significant increase in the fluorescence anisotropy signal. The method allowed enantioselective sensing of tyrosinamide and analysis in practical samples. The methodology was also applied to the L-argininamide detection, suggesting the potential generalizability of the direct FP-based strategy. Such aptamer-based assay appeared to be a sensitive analytical system of remarkable simplicity and ease of use.

Enantioseparation by MEKC using a ligand exchange-based chiral pseudostationary phase.

In this paper, a new ligand-exchange -MEKC mode, based on the design of a unique lipohilic species (4'-octadecylneamine derivative), which served both as micelle-forming surfactant (by its hydrophobic part) and central ion-complexing ligand (by its hydrophilic part) is described. The CMC of the used lipophilic neamine derivative was first determined by surface tension measurements. Subsequent NMR experiments were performed in order to investigate the Cu(II) binding properties of the neamine micellar phase. The enantioseparation properties of both the octadecylneamine derivative-Cu(II) MEKC and the native neamine-Cu(II) CE systems were evaluated and compared using the tryptophan racemate as a probe analyte. The effects of several different electrophoretic conditions on the enantiomer migration behavior in the ligand-exchange-MEKC mode were examined. The developed methodology was also applied to the enantioseparation of other analytes such as 1-methyl-tryptophan, 3,5-diiodo-tyrosine and 1-naphtyl-alanine.