Enhanced Elastocaloric Effects in γ-Graphyne.

The global emphasis on sustainable technologies has become a paramount concern for nations worldwide. Specifically, numerous sustainable methods are being explored as promising alternatives to the well-established vapor-compression technologies in cooling and heating devices. One such avenue gaining traction within the scientific community is the elastocaloric (eC) effect. This phenomenon holds promise for efficient cooling and heating processes without causing environmental harm. Studies carried out at the nanoscale have demonstrated the efficiency of the eC effect, proving to be comparable to that of state-of-the-art macroscopic systems. In this study, we used classical molecular dynamics simulations to investigate the elastocaloric effect for the recently synthesized γ-graphyne. Our analysis goes beyond obtaining changes in eC temperature and the coefficient of performance (COP) for two species of γ-graphyne nanoribbons (armchair and zigzag). We also explore their dependence on various conditions, including whether they are deposited on a substrate or prestrained. Our findings reveal a substantial enhancement in the elastocaloric effect for γ-graphyne nanoribbons when subjected to prestrain, amplifying it by at least 1 order of magnitude. Under certain conditions, the changes in the eC temperature and the COP of the structures reach expressive values as high as 224 K and 14, respectively. We discuss the implications of these results by examining the shape and behavior of the carbon-carbon bond lengths within the structures.

Elastocaloric Effect in Graphene Kirigami.

Kirigami, a traditional Japanese art of paper cutting, has recently been explored for its elastocaloric effect (ECE) in kirigami-based materials (KMs), where an applied strain induces temperature changes. Importantly, the feasibility of a nanoscale graphene kirigami monolayer was experimentally demonstrated. Here, we investigate the ECE in GK representing the thinnest possible KM to better understand this phenomenon. Through molecular dynamics simulations, we analyze the temperature change and coefficient of performance (COP) of GK. Our findings reveal that while GKs lack the intricate temperature changes observed in macroscopic KMs, they exhibit a substantial temperature change of approximately 9.32 K (23 times higher than that of macroscopic KMs, which is about 0.4 K) for heating and -3.50 K for cooling. Furthermore, they demonstrate reasonable COP values of approximately 1.57 and 0.62, respectively. It is noteworthy that the one-atom-thick graphene configuration prevents the occurrence of the complex temperature distribution observed in macroscopic KMs.

Scalable Synthesis and Characterization of Multilayer γ-Graphyne, New Carbon Crystals with a Small Direct Band Gap.

γ-Graphyne is the most symmetric sp2/sp1 allotrope of carbon, which can be viewed as graphene uniformly expanded through the insertion of two-carbon acetylenic units between all the aromatic rings. To date, synthesis of bulk γ-graphyne has remained a challenge. We here report the synthesis of multilayer γ-graphyne through crystallization-assisted irreversible cross-coupling polymerization. A comprehensive characterization of this new carbon phase is described, including synchrotron powder X-ray diffraction, electron diffraction, lateral force microscopy, Raman spectroscopy, infrared spectroscopy, and cyclic voltammetry. Experiments indicate that γ-graphyne is a 0.48 eV band gap semiconductor, with a hexagonal a-axis spacing of 6.88 Å and an interlayer spacing of 3.48 Å, which is consistent with theoretical predictions. The observed crystal structure has an aperiodic sheet stacking. The material is thermally stable up to 240 °C but undergoes transformation at higher temperatures. While conventional 2D polymerization and reticular chemistry rely on error correction through reversibility, we demonstrate that a periodic covalent lattice can be synthesized under purely kinetic control. The reported methodology is scalable and inspires extension to other allotropes of the graphyne family.

Torsional refrigeration by twisted, coiled, and supercoiled fibers.

Higher-efficiency, lower-cost refrigeration is needed for both large- and small-scale cooling. Refrigerators using entropy changes during cycles of stretching or hydrostatic compression of a solid are possible alternatives to the vapor-compression fridges found in homes. We show that high cooling results from twist changes for twisted, coiled, or supercoiled fibers, including those of natural rubber, nickel titanium, and polyethylene fishing line. Using opposite chiralities of twist and coiling produces supercoiled natural rubber fibers and coiled fishing line fibers that cool when stretched. A demonstrated twist-based device for cooling flowing water provides high cooling energy and device efficiency. Mechanical calculations describe the axial and spring-index dependencies of twist-enhanced cooling and its origin in a phase transformation for polyethylene fibers.

The structure of graphene on graphene/C60/Cu interfaces: a molecular dynamics study.

Two experimental studies reported the spontaneous formation of amorphous and crystalline structures of C60 molecules intercalated between graphene and a surface. The findings observed included interesting phenomena ranging from reaction between fullerene C60s ('C60s' stands for plural of C60) under graphene to graphene sheets sagging between C60s and control of strain in these sheets. Motivated by this work, we performed fully atomistic reactive molecular dynamics simulations to investigate the formation and thermal stability of graphene sheet wrinkles as well as graphene attachment to and detachment from a surface when the sheet is laid over a previously distributed array of C60 molecules on a copper surface at different temperatures. As graphene compresses the C60s against the surface, and graphene attachment to the surface in between C60s depends on the height of the wrinkles in the graphene sheet, configurations with both frozen and non-frozen fullerenes were investigated in the simulations in order to examine the experimental result of stable, sagged graphene sheets when the distance between C60s is about 4 nm and the height of the wrinkles in the sheet is about 0.8 nm. Below a distance of 4 nm between fullerenes, the graphene is predicted to become locally suspended and less strained. The simulations predict that this happens when the fullerenes can deform under the compressive action of the graphene sheet. If the fullerenes are kept frozen, spontaneous 'blanketing' of graphene is predicted only when the distance between neighbouring C60s is equal to or great than about 7 nm. These predictions agree with a mechanical model relating the rigidity of a graphene sheet to the energy of graphene-surface adhesion. This work further reveals the structure of intercalated molecules and the role of stability and sheet wrinkling on the preferred configuration of graphene. This study thus might assist in the development of two-dimensional confined nanoreactors for chemical reactions.

Graphene-Titanium Interfaces from Molecular Dynamics Simulations.

Unraveling the physical and chemical properties of graphene-metal contacts is a key step toward the development of graphitic electronic nanodevices. Although many studies have revealed the way that various metals interact with graphene, few have described the structure and behavior of large pieces of graphene-metal nanostructures under different conditions. Here, we present the first classical molecular dynamics study of graphene-titanium (G-Ti) structures, with and without substrates. Physical and chemical properties of equilibrium structures of G-Ti interfaces with different amounts of titanium coverage are investigated. Adhesion of Ti films on graphene is shown to be enhanced by the vacancies in graphene or the electrostatic influence of substrates. The dynamics of pristine G-Ti structures at different temperatures on planar and nonplanar substrates are investigated, and the results show that G-Ti interfaces are thermally stable, that is, not prone to any reaction toward the formation of titanium carbide.

Developing descriptors to predict mechanical properties of nanotubes.

Descriptors and quantitative structure property relationships (QSPR) were investigated for mechanical property prediction of carbon nanotubes (CNTs). 78 molecular dynamics (MD) simulations were carried out, and 20 descriptors were calculated to build quantitative structure property relationships (QSPRs) for Young's modulus and Poisson's ratio in two separate analyses: vacancy only and vacancy plus methyl functionalization. In the first analysis, C(N2)/C(T) (number of non-sp2 hybridized carbons per the total carbons) and chiral angle were identified as critical descriptors for both Young's modulus and Poisson's ratio. Further analysis and literature findings indicate the effect of chiral angle is negligible at larger CNT radii for both properties. Raman spectroscopy can be used to measure C(N2)/C(T), providing a direct link between experimental and computational results. Poisson's ratio approaches two different limiting values as CNT radii increases: 0.23-0.25 for chiral and armchair CNTs and 0.10 for zigzag CNTs (surface defects <3%). In the second analysis, the critical descriptors were C(N2)/C(T), chiral angle, and M(N)/C(T) (number of methyl groups per total carbons). These results imply new types of defects can be represented as a new descriptor in QSPR models. Finally, results are qualified and quantified against experimental data.

Electrically, chemically, and photonically powered torsional and tensile actuation of hybrid carbon nanotube yarn muscles.

Artificial muscles are of practical interest, but few types have been commercially exploited. Typical problems include slow response, low strain and force generation, short cycle life, use of electrolytes, and low energy efficiency. We have designed guest-filled, twist-spun carbon nanotube yarns as electrolyte-free muscles that provide fast, high-force, large-stroke torsional and tensile actuation. More than a million torsional and tensile actuation cycles are demonstrated, wherein a muscle spins a rotor at an average 11,500 revolutions/minute or delivers 3% tensile contraction at 1200 cycles/minute. Electrical, chemical, or photonic excitation of hybrid yarns changes guest dimensions and generates torsional rotation and contraction of the yarn host. Demonstrations include torsional motors, contractile muscles, and sensors that capture the energy of the sensing process to mechanically actuate.

Structural model for dry-drawing of sheets and yarns from carbon nanotube forests.

A structural model is developed for describing the solid-state transformation of a vertically oriented carbon multiwall nanotube (MWNT) forest to a horizontally oriented MWNT sheet or yarn. The key element of our model is a network of individual carbon nanotubes or small bundles interconnecting the array of main large-diameter MWNT bundles of the forest. The dry-draw self-assembly mechanism for MWNT sheet formation involves two principal processes that reconfigure the interconnection network: (1) unzipping by preferentially peeling off interconnections between the bundles in the forest and (2) self-strengthening of these interconnections by densification at the top and bottom of the forest during draw-induced reorientation of the bundles. It is shown that interconnection density is a key parameter that determines the ability of a MWNT forest to be dry-drawable into sheets and yarns. This model describes the principal mechanism of solid-state draw (confirmed by dynamic in situ scanning electron microscopy), the range of forest structural parameters that enable sheet draw, and observed dependencies of sheet properties on the parent MWNT forest structure.

Giant-stroke, superelastic carbon nanotube aerogel muscles.

Improved electrically powered artificial muscles are needed for generating force, moving objects, and accomplishing work. Carbon nanotube aerogel sheets are the sole component of new artificial muscles that provide giant elongations and elongation rates of 220% and (3.7 x 10(4))% per second, respectively, at operating temperatures from 80 to 1900 kelvin. These solid-state-fabricated sheets are enthalpic rubbers having gaslike density and specific strength in one direction higher than those of steel plate. Actuation decreases nanotube aerogel density and can be permanently frozen for such device applications as transparent electrodes. Poisson's ratios reach 15, a factor of 30 higher than for conventional rubbers. These giant Poisson's ratios explain the observed opposite sign of width and length actuation and result in rare properties: negative linear compressibility and stretch densification.

Mechanical properties of amorphous nanosprings.

Helical amorphous nanosprings have attracted particular interest due to their special mechanical properties. In this work we present a simple model, within the framework of the Kirchhoff rod model, for investigating the structural properties of nanosprings having asymmetric cross section. We have derived expressions that can be used to obtain the Young's modulus and Poisson's ratio of the nanospring material composite. We also address the importance of the presence of a catalyst in the growth process of amorphous nanosprings in terms of the stability of helical rods.

Mechanical properties of nanosprings.

Nanostructures (nanotubes, nanowires, etc.) have been the object of intense theoretical and experimental investigations in recent years. Among these structures, helical nanosprings or nanocoils have attracted particular interest due to their special mechanical properties. In this work, we investigated structural properties of nanosprings in the Kirchhoff rod model. We derived expressions that can be used experimentally to obtain nanospring Young's modulus and Poisson's ratio values. Our results also might explain why the presence of catalytic particles is so important in nanostructure growth.