Reducing the Bacterial Lag Phase Through Methylated Compounds: Insights from Algal-Bacterial Interactions.

The bacterial lag phase is a key period for resuming growth. Despite its significance, the lag phase remains underexplored, particularly in environmental bacteria. Here, we explore the lag phase of the model marine bacterium Phaeobacter inhibens when it transitions from starvation to growth with a microalgal partner. Utilizing transcriptomics and 13 C-labeled metabolomics, our study reveals that methylated compounds, which are abundantly produced by microalgae, shorten the bacterial lag phase. Our findings underscore the significance of methyl groups as a limiting factor during the lag phase and demonstrate that methyl groups can be harvested from algal compounds and assimilated through the methionine cycle. Furthermore, we show that methylated compounds, characteristic of photosynthetic organisms, induce variable reductions in lag times among bacteria associated with algae and plants. These findings highlight the adjustability of the bacterial lag phase and emphasize the importance of studying bacteria in an environmental context. One-Sentence Summary: Bacteria use algal compounds as a metabolic shortcut to transition from starvation to growth.

Extending the Range of Distances Accessible by 19F Electron-Nuclear Double Resonance in Proteins Using High-Spin Gd(III) Labels.

Fluorine electron-nuclear double resonance (19F ENDOR) has recently emerged as a valuable tool in structural biology for distance determination between F atoms and a paramagnetic center, either intrinsic or conjugated to a biomolecule via spin labeling. Such measurements allow access to distances too short to be measured by double electron-electron resonance (DEER). To further extend the accessible distance range, we exploit the high-spin properties of Gd(III) and focus on transitions other than the central transition (|-1/2⟩ ↔ |+1/2⟩), that become more populated at high magnetic fields and low temperatures. This increases the spectral resolution up to ca. 7 times, thus raising the long-distance limit of 19F ENDOR almost 2-fold. We first demonstrate this on a model fluorine-containing Gd(III) complex with a well-resolved 19F spectrum in conventional central transition measurements and show quantitative agreement between the experimental spectra and theoretical predictions. We then validate our approach on two proteins labeled with 19F and Gd(III), in which the Gd-F distance is too long to produce a well-resolved 19F ENDOR doublet when measured at the central transition. By focusing on the |-5/2⟩ ↔ |-3/2⟩ and |-7/2⟩ ↔ |-5/2⟩ EPR transitions, a resolution enhancement of 4.5- and 7-fold was obtained, respectively. We also present data analysis strategies to handle contributions of different electron spin manifolds to the ENDOR spectrum. Our new extended 19F ENDOR approach may be applicable to Gd-F distances as large as 20 Å, widening the current ENDOR distance window.

GdIII -19 F Distance Measurements for Proteins in Cells by Electron-Nuclear Double Resonance.

Studies of protein structure and dynamics are usually carried out in dilute buffer solutions, conditions that differ significantly from the crowded environment in the cell. The double electron-electron resonance (DEER) technique can track proteins' conformations in the cell by providing distance distributions between two attached spin labels. This technique, however, cannot access distances below 1.8 nm. Here, we show that GdIII -19 F Mims electron-nuclear double resonance (ENDOR) measurements can cover part of this short range. Low temperature solution and in-cell ENDOR measurements, complemented with room temperature solution and in-cell GdIII -19 F PRE (paramagnetic relaxation enhancement) NMR measurements, were performed on fluorinated GB1 and ubiquitin (Ub), spin-labeled with rigid GdIII tags. The proteins were delivered into human cells via electroporation. The solution and in-cell derived GdIII -19 F distances were essentially identical and lie in the 1-1.5 nm range revealing that both, GB1 and Ub, retained their overall structure in the GdIII and 19 F regions in the cell.

Tracking Conformational Changes in Calmodulin in vitro, in Cell Extract, and in Cells by Electron Paramagnetic Resonance Distance Measurements.

It is an open question whether the conformations of proteins sampled in dilute solutions are the same as in the cellular environment. Here we address this question by double electron-electron resonance (DEER) distance measurements with Gd(III) spin labels to probe the conformations of calmodulin (CaM) in vitro, in cell extract, and in human HeLa cells. Using the CaM mutants N53C/T110C and T34C/T117C labeled with maleimide-DOTA-Gd(III) in the N- and C-terminal domains, we observed broad and varied interdomain distance distributions. The in vitro distance distributions of apo-CaM and holo-CaM in the presence and absence of the IQ target peptide can be described by combinations of closed, open, and collapsed conformations. In cell extract, apo- and holo-CaM bind to target proteins in a similar way as apo- and holo-CaM bind to IQ peptide in vitro. In HeLa cells, however, in the presence or absence of elevated in-cell Ca2+ levels CaM unexpectedly produced more open conformations and very broad distance distributions indicative of many different interactions with in-cell components. These results show-case the importance of in-cell analyses of protein structures.

Improved sensitivity for W-band Gd(III)-Gd(III) and nitroxide-nitroxide DEER measurements with shaped pulses.

Chirp and shaped pulses have been recently shown to be highly advantageous for improving sensitivity in DEER (double electron-electron resonance, also called PELDOR) measurements due to their large excitation bandwidth. The implementation of such pulses for pulse EPR has become feasible due to the availability of arbitrary waveform generators (AWG) with high sampling rates to support pulse shaping for pulses with tens of nanoseconds duration. Here we present a setup for obtaining chirp pulses on our home-built W-band (95GHz) spectrometer and demonstrate its performance on Gd(III)-Gd(III) and nitroxide-nitroxide DEER measurements. We carried out an extensive optimization procedure on two model systems, Gd(III)-PyMTA-spacer-Gd(III)-PyMTA (Gd-PyMTA ruler; zero-field splitting parameter (ZFS) D∼1150MHz) as well as nitroxide-spacer-nitroxide (nitroxide ruler) to evaluate the applicability of shaped pulses to Gd(III) complexes and nitroxides, which are two important classes of spin labels used in modern DEER/EPR experiments. We applied our findings to ubiquitin, doubly labeled with Gd-DOTA-monoamide (D∼550MHz) asa model for a system with a small ZFS. Our experiments were focused on the questions (i) what are the best conditions for positioning of the detection frequency, (ii) which pump pulse parameters (bandwidth, positioning in the spectrum, length) yield the best signal-to-noise ratio (SNR) improvements when compared to classical DEER, and (iii) how do the sample's spectral parameters influence the experiment. For the nitroxide ruler, we report an improvement of up to 1.9 in total SNR, while for the Gd-PyMTA ruler the improvement was 3.1-3.4 and for Gd-DOTA-monoamide labeled ubiquitin it was a factor of 1.8. Whereas for the Gd-PyMTA ruler the two setups pump on maximum and observe on maximum gave about the same improvement, for Gd-DOTA-monoamide a significant difference was found. In general the choice of the best set of parameters depends on the D parameter of the Gd(III) complex.

Overcoming artificial broadening in Gd(3+)-Gd(3+) distance distributions arising from dipolar pseudo-secular terms in DEER experiments.

By providing accurate distance measurements between spin labels site-specifically attached to bio-macromolecules, double electron-electron resonance (DEER) spectroscopy provides a unique tool to probe the structural and conformational changes in these molecules. Gd(3+)-tags present an important family of spin-labels for such purposes, as they feature high chemical stability and high sensitivity in high-field DEER measurements. The high sensitivity of the Gd(3+) ion is associated with its high spin (S = 7/2) and small zero field splitting (ZFS), resulting in a narrow spectral width of its central transition at high fields. However, under the conditions of short distances and exceptionally small ZFS, the weak coupling approximation, which is essential for straightforward DEER data analysis, becomes invalid and the pseudo-secular terms of the dipolar Hamiltonian can no longer be ignored. This work further explores the effects of pseudo-secular terms on Gd(3+)-Gd(3+) DEER measurements using a specifically designed ruler molecule; a rigid bis-Gd(3+)-DOTA model compound with an expected Gd(3+)-Gd(3+) distance of 2.35 nm and a very narrow central transition at the W-band (95 GHz). We show that the DEER dipolar modulations are damped under the standard W-band DEER measurement conditions with a frequency separation, Δν, of 100 MHz between the pump and observe pulses. Consequently, the DEER spectrum deviates considerably from the expected Pake pattern. We show that the Pake pattern and the associated dipolar modulations can be restored with the aid of a dual mode cavity by increasing Δν from 100 MHz to 1.09 GHz, allowing for a straightforward measurement of a Gd(3+)-Gd(3+) distance of 2.35 nm. The increase in Δν increases the contribution of the |-5/2〉→|-3/2〉 and |-7/2〉→|-5/2〉 transitions to the signal at the expense of the |-3/2 〉→|-1/2〉 transition, thus minimizing the effect of dipolar pseudo-secular terms and restoring the validity of the weak coupling approximation. We apply this approach to the A93C/N140C mutant of T4 lysozyme labeled with two different Gd(3+) tags that have narrow central transitions and show that even for a distance of 4 nm there is still a significant (about two-fold) broadening that is removed by increasing Δν to 636 MHz and 898 MHz.

Gd(3+) Spin Labels Report the Conformation and Solvent Accessibility of Solution and Vesicle-Bound Melittin.

Although Gd(3+)-based spin labels have been shown to be an alternative to nitroxides for double electron-electron resonance (DEER) distance measurements at high fields, their ability to provide solvent accessibility information, as nitroxides do, has not been explored. In addition, the effect of the label type on the measured distance distribution has not been sufficiently characterized. In this work, we extended the applicability of Gd(3+) spin labels to solvent accessibility measurements on a peptide in model membranes, namely, large unilamellar vesicles (LUVs) using W-band (2)H Mims electron-nuclear double resonance (ENDOR) and electron spin echo envelope modulation (ESEEM) techniques and Gd(3+)-ADO3A-labeled melittin. In addition, we carried out Gd(3+)-Gd(3+) DEER distance measurements to probe the peptide conformation in solution and when bound to LUVs. A comparison with earlier results reported for the same system with nitroxide labels shows that, although in both cases the peptide binds parallel to the membrane surface, the Gd(3+)-ADO3A label tends to protrude from the membrane into the solvent, whereas the nitroxide does the opposite. This can be explained on the basis of the hydrophilicity of the Gd(3+)-ADO3A labels in contrast with the hydrophobicity of nitroxides. The distance distributions obtained from different labels are accordingly different, with the Gd(3+)-ADO3A yielding consistently broader distributions. These discrepancies are most pronounced when the peptide termini are labeled, which implies that such labeling positions may be inadvisible.

Direct monitoring of opto-mechanical switching of self-assembled monolayer films containing the azobenzene group.

The potential for manipulation and control inherent in molecule-based motors holds great scientific and technological promise. Molecules containing the azobenzene group have been heavily studied in this context. While the effects of the cis-trans isomerization of the azo group in such molecules have been examined macroscopically by a number of techniques, modulations of the elastic modulus upon isomerization in self-assembled films were not yet measured directly. Here, we examine the mechanical response upon optical switching of bis[(1,1'-biphenyl)-4-yl]diazene organized in a self-assembled film on Au islands, using atomic force microscopy. Analysis of higher harmonics by means of a torsional harmonic cantilever allowed real-time extraction of mechanical data. Quantitative analysis of elastic modulus maps obtained simultaneously with topographic images show that the modulus of the cis-form is approximately twice that of the trans-isomer. Quantum mechanical and molecular dynamics studies show good agreement with this experimental result, and indicate that the stiffer response in the cis-form comprises contributions both from the individual molecular bonds and from intermolecular interactions in the film. These results demonstrate the power and insights gained from cutting-edge AFM technologies, and advanced computational methods.

A combined pulse EPR and Monte Carlo simulation study provides molecular insight on peptide-membrane interactions.

We present a new approach to obtain details on the distribution and average structure and locations of membrane-associated peptides. The approach combines (i) pulse double electron-electron resonance (DEER) to determine intramolecular distances between residues in spin labeled peptides, (ii) electron spin echo envelope modulation (ESEEM) experiments to measure water exposure and the direct interaction of spin labeled peptides with deuterium nuclei on the phospholipid molecules, and (iii) Monte Carlo (MC) simulations to derive the peptide-membrane populations, energetics, and average conformation of the native peptide and mutants mimicking the spin labeling. To demonstrate the approach, we investigated the membrane-bound and solution state of the well-known antimicrobial peptide melittin, used as a model system. A good agreement was obtained between the experimental results and the MC simulations regarding the distribution of distances between the labeled amino acids, the side chain mobility, and the peptide's orientation. A good agreement in the extent of membrane penetration of amino acids in the peptide core was obtained as well, but the EPR data reported a somewhat deeper membrane penetration of the termini compared to the simulations. Overall, melittin adsorbed on the membrane surface, in a monomeric state, as an amphipatic helix with its hydrophobic residues in the hydrocarbon region of the membrane and its charged and polar residues in the lipid headgroup region.

Distribution of guest molecules in Pluronic micelles studied by double electron electron spin resonance and small angle X-ray scattering.

Pulse double electron-electron spin resonance (DEER) measurements were applied to characterize the distribution and average number of guest-molecules (in the form of spin-probes) in Pluronic P123 micelles. Two types of spin-probes were used, one of which is a spin-labeled P123 (P123-NO), which is similar to the micelles constituent molecules, and the other is spin-labeled Brij56 (Brij56-NO) which is significantly different. Qualitative information regarding the relative location of the spin-labels within the micelles was obtained from the isotropic hyperfine coupling and the correlation times, determined from continuous wave EPR measurements. In addition, complementary small angle X-ray scattering (SAXS) measurements on the P123 micellar solutions, with and without the spin-probes, were carried out for an independent determination of the size of the core and corona of the micelles and to ensure that the spin-probes do not alter the size or shape of the micelles. Two approaches were used for the analysis of the DEER data. The first is model free, which is based on the determination of the leveling off value of the DEER kinetics. This provided good estimates of the number of radicals per micelle (low limit) which, together with the known concentration of the P123 molecules, gave the aggregation number of the P123 micelles. In addition, it provided an average distance between radicals which is within the range expected from the micelles' size determined by SAXS. The second approach was to analyze the full kinetic form which is model dependent. This analysis showed that both spin-labels are not homogeneously distributed in either a sphere or a spherical shell, and that large distances are preferred. This analysis yielded a slightly larger occupation volume within the micelle for P123-NO than for Brij56-NO, consistent with their chemical character.

Synthesis and evaluation of the antiproliferative activities of derivatives of carboxyalkyl isoflavones linked to N-t-Boc-hexylenediamine.

The isoflavones biochanin A ( 1a), genistein ( 1b), and daidzein ( 4) at concentrations >20 microM inhibit cell growth of various cancer cell lines. To enhance the antiproliferative activities of these compounds, we synthesized three analogs, 2-[3-carboxy-(6-tert-butoxycarbonylamino)-hexylamino-propyl]-7,5-dihydroxy-4'-methoxyisoflavone ( 3a), 2-[3-[N-[6-(tert-butoxycarbonyl)-aminohexyl]]-caboxamidopropyl]-5,7,4'-trihydroxyisoflavone ( 3b), and 5-{2-[3-(4-hydroxy-phenyl)-4-oxo-4 H-chromen-7-yloxy]-acetylamino}-pentyl)-carbamic acid tert-butyl ester ( 6). When cancer cells expressing predominantly estrogen receptor mRNA of the beta- relative to alpha-subtype were treated with 3a, 3b, or 6, DNA synthesis was inhibited in a dose-dependent manner, ranging from 15 to 3000 nmol/L, with little inhibitory effect in normal vascular smooth muscle cells. Compound 6 was the most potent one, and its antiproliferative effect in cancer cells was modulated by estrogen and by the apoptosis inhibitor Z-VADFK. When tested in vivo, compound 6 decreased tumor volume of ovarian xenografts by 50%, with no apparent toxicity. Compound 6 may be a promising agent for therapy of cancer either alone or in combination with chemotherapeutic agents.

A single-step photolithographic interface for cell-free gene expression and active biochips.

We have developed a biochip platform technology suitable for controlled cell-free gene expression at the micrometer scale. A new hybrid molecule, "Daisy", was designed and synthesized to form in a single step a biocompatible lithographic interface on silicon dioxide. A protocol is described for the immobilization of linear DNA molecules thousands of base pairs long on Daisy-coated surfaces with submicrometer spatial resolution and up to high densities. On-chip protein synthesis can be obtained with a dynamic range of up to four orders of magnitude and minimal nonspecific activity. En route to on-chip artificial gene circuits, a simple two-stage gene cascade was built, in which the protein synthesized at the first location diffuses to regulate the synthesis of another protein at a second location. We demonstrate the capture of proteins from crude extract onto micrometer-scale designated traps, an important step for the formation of miniaturized self-assembled protein chips. Our biochip platform can be combined with elastomeric microfluidic devices, thereby opening possibilities for isolated and confined reaction chambers and artificial cells in which the transport of products and reagents is done by diffusion and flow. The Daisy molecule and described approach enables groups not proficient in surface chemistry to construct active biochips based on cell-free gene expression.

Solid-state NMR investigation of sodium nucleotide complexes.

Solid-state NMR has been used to analyze the chemical environments of sodium sites in powdered crystalline samples of sodium nucleotide complexes. Three of the studied complexes have been previously characterized structurally by crystallography (disodium deoxycytidine-5'-monophosphate heptahydrate, disodium deoxyuridine-5'-monophosphate pentahydrate and disodium adensoine-5'-triphosphate trihydrate). For these salts, the nuclear quadrupole coupling parameters measured by (23)Na multiple-quantum magic-angle-spinning NMR could be readily correlated with sodium ion coordination environments. Furthermore, two complexes that had not been previously characterized structurally, disodium uridine-3'-monophosphate and a disodium uridine-3'-monophosphate/disodium uridine-2'-monophosphate mix, were identified by solid-state NMR. A spectroscopic assignment of the four sites of an additional salt, disodium adensoine-5'-triphosphate trihydrate, is also presented and discussed within the context of creating a general approach for the spectroscopic assignment of multiple sites in sodium nucleotide complexes.

A solid-state 13C NMR analysis of molecular dynamics in aramide polymers.

The local dynamics of aromatic cores was analyzed for a homologous series of polyamides in the solid phase incorporating phenyl, biphenyl and naphthyl groups. Preliminary wide-line and spin-relaxation variable-temperature (1)H NMR measurements revealed the presence of thermally activated molecular motions for each polymer studied. A number of (13)C NMR experiments were then implemented to further clarify the nature and extent of such motions. These included (1)H-(13)C 2D separate-local-field measurements, whose line shapes revealed that motions involved for all cases a superposition of states. These could in principle be associated with rigid and mobile populations in these semi-crystalline aramides, a model that yielded a proper description of the spectra at all temperatures. To further probe this model the relaxation behavior of the aramides'(13)C spins was monitored in the rotating frame as a function of temperature, in both the presence and absence of homonuclear (1)H-(1)H decoupling. The variations observed in these measurements evidenced a thermally activated, relatively broad distribution of motional rates in the polymers. Editing the 2D local-field data according to the (13)C relaxation also supported this heterogeneous dynamic model. The mechanism underlying this behavior and implications towards the (13)C analysis of motions in aramides in particular and complex polymers in general, is briefly discussed.

Magnetic resonance imaging visualization of hyaluronidase in ovarian carcinoma.

Hyaluronan, a high molecular weight, negatively charged polysaccharide, is a major constituent of the extracellular matrix. High molecular weight hyaluronan is antiangiogenic, but its degradation by hyaluronidase generates proangiogenic breakdown products. Thus, by expression of hyaluronidase, cancer cells can tilt the angiogenic balance of their microenvironment. Indeed, hyaluronidase-mediated breakdown of hyaluronan correlates with aggressiveness and invasiveness of ovarian cancer metastasis and with tumor angiogenesis. The goal of this work was to develop a novel smart contrast material for detection of hyaluronidase activity by magnetic resonance imaging (MRI). Gadolinium-diethylenetriaminepentaacetic acid (GdDTPA) covalently linked to hyaluronan on the surface of agarose beads showed attenuated relaxivity. Hyaluronidase, either purified from bovine testes or secreted by ES-2 and OVCAR-3 human epithelial ovarian carcinoma cells, activated the hyaluronan-GdDTPA-beads by rapidly altering the R1 and R2 relaxation rates. The change in relaxation rates was consistent with the different levels of biologically active hyaluronidase secreted by those cells. Hyaluronan-GdDTPA-beads were further used for demonstration of MRI detection of hyaluronidase activity in the proximity of s.c. ES-2 ovarian carcinoma tumors in nude mice. Thus, hyaluronan-GdDTPA-beads could allow noninvasive molecular imaging of hyaluronidase-mediated tilt of the peritumor angiogenic balance.

Measurement of the conductance of single conjugated molecules.

Electrical conduction through molecules depends critically on the delocalization of the molecular electronic orbitals and their connection to the metallic contacts. Thiolated (- SH) conjugated organic molecules are therefore considered good candidates for molecular conductors: in such molecules, the orbitals are delocalized throughout the molecular backbone, with substantial weight on the sulphur-metal bonds. However, their relatively small size, typically approximately 1 nm, calls for innovative approaches to realize a functioning single-molecule device. Here we report an approach for contacting a single molecule, and use it to study the effect of localizing groups within a conjugated molecule on the electrical conduction. Our method is based on synthesizing a dimer structure, consisting of two colloidal gold particles connected by a dithiolated short organic molecule, and electrostatically trapping it between two metal electrodes. We study the electrical conduction through three short organic molecules: 4,4'-biphenyldithiol (BPD), a fully conjugated molecule; bis-(4-mercaptophenyl)-ether (BPE), in which the conjugation is broken at the centre by an oxygen atom; and 1,4-benzenedimethanethiol (BDMT), in which the conjugation is broken near the contacts by a methylene group. We find that the oxygen in BPE and the methylene groups in BDMT both suppress the electrical conduction relative to that in BPD.

Properties of the silica layer during the formation of MCM-41 studied by EPR of a silica-bound spin probe.

The properties of the silica layer during the formation of the mesoporous material MCM-41 were investigated by electron paramagnetic resonance (EPR) experiments carried out on a specifically designed, organo(trialkoxy)silane spin probe, SL1SiEt. Minute amounts of the spin probe were co-condensed with the silica source, tetraethyl orthosilicate (TEOS), in the synthesis of MCM-41 with cetyltrimethylammonium bromide (CTAB) under basic conditions. The mobility and location of the spin probe were followed in the CTAB micellar solution before the reaction, in the reaction mixture and in the final ordered material. It was found that the EPR spectra of hydrolyzed SL1SiEt throughout the room temperature part of the reaction are characteristic of a fast tumbling species, indicating that the silica is highly fluid prior to drying. After filtering, a slow motion type spectrum was observed, showing that the spin-label experiences considerable motional hindrance. The liquidlike behavior could be restored upon stirring the material in water. When the reaction is performed with a hydrothermal stage, the spectrum of SL1SiEt in the final product is the same as that of the room temperature synthesized material, but the addition of water did not restore the high mobility, due to a higher degree of silica cross-linking. The location of SL1SiEt throughout the formation process was obtained from electron spin-echo envelope modulation (ESEEM) measurements on MCM-41 prepared with CTAB deuterated either at the N-methyl or the alpha position and in a reaction carried out in D2O. Comparing the deuterium modulation depth, k(2H), induced by CTAB-alpha-d2, CTAB-d9, or D2O in CTAB micellar solutions of a number of reference spin probes with those of SL1SiEt revealed that the hydrolyzed SL1SiEt is located near the polar heads of the surfactant in the absence of base and TEOS. This supports the postulation of charge matching at the interface as a driving force for the formation of the mesostructure. Similar experiments carried out on reaction mixtures containing SL1SiEt showed a decrease of k(2H) from CTAB-alpha-d2 and CTAB-d9 compared to the micellar solution, exhibiting practically no time dependence. This indicates that the spin probe is pulled away from the micelle-water interface into the loosely linked, forming silica network. After drying, the modulation depth induced by CTAB-alpha-d2 and CTAB-d9 increases, showing that, once the water is removed, the silica walls contract around the micelles, pushing the silica-linked spin probe into the organic phase within the mesopores.

NMR study of the adsorption-desorption kinetics of dissolved tetraalanine in MCM-41 mesoporous material.

In this study we show how deuterium magic-angle spinning NMR spectroscopy can be used to investigate the adsorption-desorption kinetics of molecules in solution at surface-liquid interfaces. An aqueous solution of deuterium-labeled tetraalanine is inserted in the pores of MCM-41 mesoporous material, and its 2H MAS NMR spectrum is measured as a function of temperature and fraction of filling of the pores. Prior to this study, the different types of water in MCM-41 are characterized as a function of water loading of the pores. Analysis of 2H MAS sideband line shapes enabled the determination of the adsorption and desorption rates and the activation energies of desorption.

59Co solid-state NMR as a new probe for elucidating metal binding in polynucleotides.

Although magnesium fulfills several essential biochemical roles, direct studies on this ion are complicated by its unfavorable spectroscopic characteristics. This contribution explores the possibility of monitoring magnesium-nucleic acid binding via a combination of [Co(NH3)6]3+ as surrogate for [Mg(H2O)6]2+, and of high-resolution solid-state 59Co NMR as a spectroscopic probe. Such strategy quenches fast cationic exchanges between bound and free states, while exploiting the superior NMR properties of the 59Co spin. Experiments on relatively small amounts of tRNA can then discern resonances corresponding to different metal binding environments. These characterizations were assisted by studies on model compounds and by multinuclear 31P-59Co recoupling experiments.