Corrigendum: The possibility of clinical bonding between metal/ceramic brackets to zirconia: in vitro study.

[This corrects the article DOI: 10.3389/fbioe.2024.1354241.].

Electrochemical Oxidative (4 + 2) Cyclization of Anilines and o-Phenylenediamines for the Synthesis of Phenazines.

Phenazines, crucial constituents of nitrogen-containing heterocycles, widely exist in functional compounds. Herein, we report an anodic oxidative (4 + 2) cyclization between anilines and o-phenylenediamines for the uniform construction of phenazines in a simple undivided cell. Dual C-H amination followed by oxidation represents an outstanding step and atom efficiency. A sequence of phenazines is produced with excellent functional group tolerance at room temperature.

Electro-oxidative three-component cascade coupling of isocyanides with elemental sulfur and amines for the synthesis of 2-aminobenzothiazoles.

2-Aminobenzothiazoles are commonly encountered in various functional compounds. Herein, we disclose an electro-oxidative three-component reaction for the effective synthesis of 2-aminobenzothiazoles under mild conditions, utilizing non-toxic and abundant elemental sulfur as the sulfur source. Both aliphatic amines and aryl amines demonstrate good compatibility at room temperature, highlighting the broad functional group tolerance of this approach. Additionally, elemental selenium demonstrated reactivities comparable to those of elemental sulfur.

The possibility of clinical bonding between metal/ceramic brackets to zirconia: in vitro study.

Objective: The present study aimed to assess the bond strength and durability of six bonding agents concerning their application to metal or ceramic brackets and zirconia. Materials and Methods: Six resin cement bonding agents (XT, XTS, RSBU, RGBU, SBPM, and GMP) were chosen for this investigation. Specimens were either stored in distilled water at 37°C for 24 h or subjected to 5,000 thermocycles before conducting a Shear Bond Strength (SBS) test. Statistical analysis of the SBS data was performed using three-way ANOVA and Games-Howell tests (α = 0.05). The Adhesive Remnant Index was examined, and the debonding surface details on brackets and zirconia were observed. Results: For metal brackets, all groups demonstrated clinically acceptable bond strength, irrespective of storage conditions, except for the XT group. Regarding ceramic brackets, all groups displayed acceptable bond strength after 24 h of water storage. However, following thermocycling, a significant decrease in SBS was noted across all groups (p < 0.05), with SBPM exhibiting a higher bond strength. Three-way ANOVA analysis indicated that SBS values were notably influenced by each factor, and an interaction among the three independent variables was observed (p = 0.000). Conclusion: The reliable bond strength between ceramic brackets and zirconia was significantly lower after thermocycling compared to that of metal brackets and zirconia. SBPM exhibited consistent and robust bond strength between ceramic/metal brackets and zirconia across various storage conditions. Furthermore, the HEMA-free adhesive demonstrated a potentially more consistent bonding performance compared to the HEMA-containing adhesive employed in this study.

Photoredox radical cyclization reaction of o-vinylaryl isocyanides with acyl chlorides to access 2,4-disubstituted quinolines.

We herein report an efficient photoredox radical cyclization reaction of o-vinylaryl isocyanides with acyl chlorides to access a wide range of 2,4-disubstituted quinolines. Preliminary mechanism experiment results suggested that this reaction was initiated by an acyl radical generated from acyl chlorides through a single-electron-transfer (SET) process. This transformation showed good substrate suitability and functional group compatibility at room temperature.

The color stability, water sorption, and solubility of ten composite resins.

OBJECTIVES: This study aims to evaluate the color stability and related properties including water sorption and solubility of ten light-cured composite resins in different solutions. METHODS: A total of 10 composite resins were BeautifilⅡ(B2) and Ceram. X One Universal (CXU), Charisma (CS), Charisma Diamond (CD), Denfil (DF), DX. Universal (DXU), Filtek Z250 (Z250), Filtek Z350 XT (Z350), FS-1 (FS), and Magnafill Putty (MP). Meanwhile, a total of 20 disk-shaped samples were fabricated and randomly divided into four groups (n=5), which were immersed in distilled water (control group), curry, coffee, and red wine for 28 days. The color (CIE L∗a∗b∗) was measured by a spectrophotometer at baseline and 1, 7, 14, 21, and 28 days after immersion, and the color differences were calculated. Water sorption and solubility values were measured ba-sed on ISO 4049: 2019. In addition, three-way ANOVA was used to evaluate the influence of resin materials, solutions, and immersion time on discoloration results, meanwhile, one-way ANOVA was used to compare the water sorption values and solubility values of different materials. RESULTS: All samples showed a certain degree of color change with time. Color differences were significantly influenced by materials, solutions, and immersion time (P<0.001). The color changes of the measured materials at any time point: curry>red wine>coffee>distilled water. Thus, all materials showed clinically unacceptable discoloration (ΔE>3.3) after immersing in staining curry, coffee, and red wine for 7 days. Therefore, when immersed in curry for 28 days, CS and DXU had the smallest and the largest color difference. In addition, when immersed in coffee for 28 days, FS showed the smallest color change and DXU showed the largest. Moreover, when immersed in red wine for 28 days, FS showed the smallest color change and Z350 showed the largest. Furthermore, MP and CXU had small color differences in all solutions. Meanwhile, Z350 had the highest water sorption and MP had the lowest. The solubility values of CS and CD were significantly higher than those of other materials. CONCLUSIONS: The color stability of light-cured composite resin is materials-depended and affected by pigment types and immersion time. Thus, MP and CXU have better color stability. MP has low water sorption.

Evaluation of the Color Stability, Water Sorption, and Solubility of Current Resin Composites.

This study aims to assess the color stability, water sorption, and solubility of 11 resin composites as commercially available dental products. Twenty samples (10 mm in diameter and 2 mm in thickness) of each material were fabricated using a customized silicone mold, followed by immersion in each of curry, coffee, wine, and distilled water for 28 days (n = 5). Baseline shade and color changes (ΔE) were measured using a reflection spectrophotometer. The CIE L*, a*, b* system was used to evaluate the color changes. Five samples of each resin composite were applied to test water sorption and solubility according to ISO 4049:2009. As a result, the ∆E values were significantly influenced by each of the three factors (composition of material, solution, time) and the interactions between them (p < 0.001). Highest resistance to discoloration was achieved by Ceram.X One Universal (CXU), followed by Magnafill Putty (MP). Generally, microhybrid composites showed fewer color changes than nanohybrid composites and giomers. DX. Universal and Filtek Z350 XT showed the highest ΔE values in all colorants. All materials tested in this study fulfilled the criteria of ISO 4049:2009; CXU and MP had the lowest water sorption and solubility. The Pearson test showed statistically significant positive correlations between water sorption and ΔE and between solubility and ΔE.

Shear bond strength of different bonding agents to orthodontic metal bracket and zirconia.

This study aimed to evaluate the shear bond strength (SBS) of four bonding agents used to bond metal brackets to zirconia under different storage conditions. Four bonding agents were used [FLC: (Fuji ORTHO LC), XT: (TransbondTM XT), RUC-SBU: (Rely XTM Ultimate Clicker Adhesive Resin Cement+Single Bond Universal), and RUC-GBU: (Rely XTM Ultimate Clicker Adhesive Resin Cement+Gluma Bond Universal)] to bond two types of metal brackets (PT/3M) to zirconia surfaces, and they were stored in water at 37ºC for 24 h or thermocycling for 3,000 cycles. The SBS data of RUC-SBU and RUC-GBU using PT brackets were significantly higher than those of 3M brackets before and after thermocycling. It could be concluded that RUC-SBU and RUC-GBU could offer sufficient bond strength between metal brackets and zirconia for the short term compared with FLC and XT. The design of brackets can significantly affect the bond strength to zirconia.

Rapid regulations of metabolic reactions in Escherichia coli via light-responsive enzyme redistribution.

Protein-based condensates have been proposed to accelerate biochemical reactions by enriching reactants and enzymes simultaneously. Here, we engineered those condensates into a photo-activated switch in Escherichia coli (PhASE) to regulate enzymatic reactions via tuning the spatial correlation of enzymes and substrates. In this system, scaffold proteins undergo liquid-liquid phase separation (LLPS) to form light-responsive compartments. Tethered with a light-responsive protein, enzymes of interest (EOIs) can be recruited by those compartments from cytosol within only a few seconds after a pulse of light induction and fully released in 15 min. Furthermore, we managed to enrich small molecular substrates simultaneously with enzymes in the compartments and achieved the acceleration of luciferin and catechol oxidation by 2.3- and 1.6-folds, respectively. We also developed a quantitative model to guide the further optimization of this demixed regulatory system. Our tool can thus be used to study the rapid redistribution of proteins, and reversibly regulate enzymatic reactions in E. coli.

FRK inhibits glioblastoma progression via phosphorylating YAP and inducing its ubiquitylation and degradation by Siah1.

BACKGROUND: We previously report that yes-associated protein (YAP), the core downstream effector of Hippo pathway, promotes the malignant progression of glioblastoma (GBM). However, although classical regulatory mechanisms of YAP are well explored, how YAP is modulated by the Hippo-independent manner remains poorly understood. Meanwhile, the nonreceptor tyrosine kinase Fyn-related kinase (FRK), which exhibits low expression and possesses tumor suppressor effects in GBM, is reported to be involved in regulation of protein phosphorylation. Here, we examined whether FRK could impede tumor progression by modulating YAP activities. METHODS: Human GBM cells and intracranial GBM model were used to assess the effects of FRK and YAP on the malignant biological behaviors of GBM. Immunoblotting and immunohistochemistry were used to detect the expression of core proteins in GBM tissues. Co-immunoprecipitation, proximity ligation assay, luciferase assay and ubiquitination assay were utilized to determine the protein-protein interactions and related molecular mechanisms. RESULTS: The expression levels of FRK and YAP were inversely correlated with each other in glioma tissues. In addition, FRK promoted the ubiquitination and degradation of YAP, leading to tumor suppression in vitro and in vivo. Mechanistically, FRK interacted with and phosphorylated YAP on Tyr391/407/444, which recruited the classical E3 ubiquitin ligase Siah1 to catalyze ubiquitination and eventually degradation of YAP. Siah1 is required for YAP destabilization initiated by FRK. CONCLUSIONS: We identify a novel mechanism by which FRK orchestrates tumor-suppression effect through phosphorylating YAP and inducing its ubiquitination by Siah1. FRK-Siah1-YAP signaling axis may serve as a potential therapeutic target for GBM treatment.

Enhancing the Stability of the Resin-Dentin Bonding Interface with Ag+- and Zn2+-Exchanged Zeolite A.

Enhancing the stability of the resin-dentin bonding interface via simultaneously improving the antibacterial, mechanical, and adhesive properties of a dental adhesive is the key to prolonging the longevity of dental restoration for caries treatment. Herein, we present the stabilization effect of Ag+- and Zn2+-exchanged zeolite A (denoted as Ag-A and Zn-A, respectively) on the resin-dentin bonding interface. Ag-A and Zn-A zeolites exhibited sustained ion release capability, outstanding biocompatibility to L929 cells (<2 mg/mL), and excellent antibacterial ability to Streptococcus mutans (minimum inhibitory concentration: 100 µg/mL for Ag-A and 200 µg/mL for Zn-A). One-step self-etching adhesives modified by Ag-A, Zn-A, or Ag-/Zn-A (1/1 in weight) zeolites with an ultralow loading of 0.2 wt % exhibited favorable antibacterial activity with the inhibition of biofilm formation by 70.33, 56.47, and 62.54%, respectively. Compared to the control group, Zn-A- and Ag-/Zn-A-modified adhesives significantly increased the wettability properties of the adhesive and the long-term resin-dentin bond strength (by ∼25%) after 5000 thermocycles of aging. The current data demonstrated that the introduction of 0.2 wt % Zn-A or Ag-/Zn-A into the adhesive remarkably enhanced the stability of the resin-dentin bonding interface. Our findings provide a new strategy to modify the dental adhesive for further optimizing the longevity of dental restorations for caries.

Effect of air-blowing temperature and water storage time on the bond strength of five universal adhesive systems to dentin.

The purpose of this study was to evaluate the air-blowing temperature and water storage time on the micro-tensile bond strength (µTBS) of five universal adhesive systems to dentin. The bond strength with two different air-blowing temperatures (60±2ºC and 23±2ºC) was measured after water storage at 37ºC for 24 h and 100 days respectively. The fracture surface on dentin side was observed by scanning electron microscope (SEM). Three-way ANOVA revealed a significant effect of universal system (p<0.001) and air-blowing temperature (p<0.001) on bond strength to dentin except water-storage time (p=0.145). The interaction within three factors was significantly different (p<0.001). It could be concluded that the µTBS of universal systems to dentin was material-depended. The higher and more stable bonding performance of universal systems on dentin could be achieved by air-blowing at 60±2ºC temperature. In addition, the quantity of voids in the adhesive layer of aceton-based universal adhesive was significantly reduced by higher temperature.

[Effects of adhesive and primer on the bonding strength of zirconia to resin cement].

OBJECTIVE: This study aimed to compare the effects of water storage treatment and thermal cycling on the shear bond strength (SBS) of three self-adhesive dual-cure resin cements. METHODS: Six cubic zirconia specimens with side length of 2 cm were obtained by cutting and sintering. Three self-adhering dual-cure resin cements (i.e., Clearfil SAC, RelyX U200, and Multilink Speed) were selected. According to their bonding modes, they were divided into three groups: direct bonding group (direct coating with resin cement), adhesive group (applying universal adhesives and then coating with resin cement), and primer group (applying Z-Prime Plus and then coating with resin cement). According to experimental conditions, each group was divided into two subgroups: subgroup a (water storage at 37 ℃ for 24 h) and subgroup b (thermalcycling for 5 000 times). SBS data were analyzed by one-way ANOVA by using SPSS 19.0 software (P<0.05). The fractured zirconia surface was observed under a stereomicroscope. RESULTS: After water storage for 24 h, the SBS of the adhesive group and the primer group of the three resin cements was higher than that of the direct adhesive group (P<0.05), but the difference in SBS between the adhesive group and the primer group was not significant (P>0.05). After thermalcycling, the SBS of the three types of resin cements decreased (P<0.05); the SBS of the adhesive group was higher than that of the direct adhesive group and the primer group (P<0.05). Fracture mode analysis revealed that the type Ⅲ fracture mode evidently increased after the thermalcycling treatment compared with the water storage treatment. CONCLUSIONS: The universal adhesives and the primer can improve the SBS of self-adhesive dual-cure resin cement in water storage at 37 ℃ for 24 h. The universal adhesives had a better bonding durability than the zirconia primer.

Lithium Nitrate Regulated Sulfone Electrolytes for Lithium Metal Batteries.

The electrolytes in lithium metal batteries have to be compatible with both lithium metal anodes and high voltage cathodes, and can be regulated by manipulating the solvation structure. Herein, to enhance the electrolyte stability, lithium nitrate (LiNO3 ) and 1,1,2,2-tetrafuoroethyl-2',2',2'-trifuoroethyl(HFE) are introduced into the high-concentration sulfolane electrolyte to suppress Li dendrite growth and achieve a high Coulombic efficiency of >99 % for both the Li anode and LiNi0.8 Mn0.1 Co0.1 O2 (NMC811) cathodes. Molecular dynamics simulations show that NO3 - participates in the solvation sheath of lithium ions enabling more bis(trifluoromethanesulfonyl)imide anion (TFSI- ) to coordinate with Li+ ions. Therefore, a robust LiNx Oy -LiF-rich solid electrolyte interface (SEI) is formed on the Li surface, suppressing Li dendrite growth. The LiNO3 -containing sulfolane electrolyte can also support the highly aggressive LiNi0.8 Mn0.1 Co0.1 O2 (NMC811) cathode, delivering a discharge capacity of 190.4 mAh g-1 at 0.5 C for 200 cycles with a capacity retention rate of 99.5 %.

Competing Dehalogenation versus Borylation of Aryl Iodides and Bromides under Transition-Metal-Free Basic Conditions.

In this work, selectivity-controllable base-promoted transition-metal-free borylation and dehalogenation of aryl halides are described. Under the conditions of borylation, the dehalogenation which emerges as a competitive side reaction has been well-controlled by carefully controlling the borylation conditions. On the other hand, the dehalogenation using benzaldehyde as a hydrogen source has also been accomplished. The applications of direct radical borylation and dehalogenation of aryl halides demonstrate their synthetic practicability in pharmaceutical-oriented organic synthesis. Based on the experimental evidences, the tBuOK/1,10-Phen-triggered radical nature of both competitive reactions has been revealed.

Activation of STAT1 by the FRK tyrosine kinase is associated with human glioma growth.

PURPOSE: Glioma is a highly aggressive and lethal brain tumor. Signal transducers and activators of transcription (STAT) pathway are widely implicated in glioma carcinogenesis. Our previous study found that the Fynrelated kinase (FRK) gene, plays as a tumor suppressor in the development and progression of glioma. This study aimed to investigate the role of FRK in the activation pathway of STATs and its effect on the growth of glioma. METHODS: The U251 and U87 cells with stable FRK overexpression were generated by lentivirus technique. The effects of FRK on the related proteins of STAT signaling pathway were detected by western blotting. Coimmunoprecipitation was used to detect the association of FRK and STAT1. The effects of STAT1 on the proliferation of glioma cells were detected by CCK8 or Edu cell proliferation assays. The expressions and correlation of FRK and p-STAT1 in glioma tissues were detectd by western blotting or immunohistochemistry. The effect of FRK on the growth of glioma was investigated in vivo mouse model. RESULTS: The level of p-JAK2 and p-STAT1 increased after FRK overexpression, while they decreased after FRK downregulation both in U251 and U87 cells. However, FRK had no effect on STAT3 phosphorylation. FRK-induced STAT1 activation was not dependent on JAK2. FRK associated with STAT1, induced STAT1 nuclear translocation and regulated the expressions of STAT1-related target genes. STAT1 overexpression suppressed the proliferation of glioma cells. In contrast, STAT1 knockdown by siRNA promoted glioma cell growth. Importantly, down-regulation of STAT1 partially attenuated FRK-induced growth suppression. The clinical sample-based study indicated that the expression of FRK was significantly correlated with the expression of p-STAT1. FRK significantly inhibited glioma tumor growth in vivo. CONCLUSIONS: Our findings highlighted a critical role of FRK in tumor suppression ability through promoting STAT1 activation, and provided a potential therapeutic target for glioma.

Copper-catalyzed oxidative benzylic C-H cyclization via iminyl radical from intermolecular anion-radical redox relay.

Base-promoted C-H cleavage without transition metals opens a practical alternative for the one based on noble metals or radical initiators. The resulting carbanion can pass through radical addition to unsaturated bonds like C-N or C-C triple bonds, in which stoichiometric oxidants are needed. When in situ C-H cleavage meets catalytic carbanion-radical relay, it turns to be challenging but has not been accomplished yet. Here we report the combination of base-promoted benzylic C-H cleavage and copper-catalyzed carbanion-radical redox relay. Catalytic amount of naturally abundant and inexpensive copper salt, such as copper(II) sulfate, is used for anion-radical redox relay without any external oxidant. By avoiding using N-O/N-N homolysis or radical initiators to generate iminyl radicals, this strategy realizes modular synthesis of N-H indoles and analogs from abundant feedstocks, such as toluene and nitrile derivatives, and also enables rapid synthesis of large scale pharmaceuticals.

Effect of air-blowing time and long-term storage on bond strength of universal adhesives to dentin.

OBJECTIVES: To evaluate the effects of air-blowing time and storage time on microtensile bond strength (µTBS) of universal adhesives to dentin. MATERIALS AND METHODS: Ninety flat dentin surfaces from extracted human third molars were bonded with three universal adhesives (Clearfil Universal Bond-CU; G-Premio Bond-GP; Scotchbond Universal Adhesives-SB). Bonded dentin surfaces were air-dried for 5 s, 15 s, or 30 s followed by resin composite built-up. Resin-dentin beams were tested with µTBS test after different storage time in distilled water (24 h and 1 year). Data were analyzed by three-way ANOVA and Duncan test at (α = 0.05). Failure mode and resin-dentin interfaces were observed using a scanning electron microscope (SEM). Specific features of fractured beams after µTBS were further observed using SEM at high magnification. RESULTS: Extension of air-blowing time from 5 s to 30 s increased the 24 h µTBS of CU only. Bond strength of all adhesives significantly decreased after 1-year storage except for CU at 5 s and 30 s of air-blowing time. One-year µTBS were significantly higher when air-blowing times were extended to 15 s for SB and 30 s for CU. Air-blowing time had no influence on GP. CONCLUSION: The effect of air-blowing time and storage time on resin-dentin bond was material-dependent. CLINICAL RELEVANCE: Extended air-blowing time increased the bond strength and bond durability of CU. Extension of air-blowing time to 15 s and 30 s improve the long-term bond strength of SB and CU, respectively.

Golgi Phosphoprotein 3 Promotes Wls Recycling and Wnt Secretion in Glioma Progression.

BACKGROUND/AIMS: Golgi phosphoprotein 3 (GOLPH3) plays pro-malignancy roles in several types of cancer. However, the molecular mechanism underlying GOLPH3 promoting tumor progression remains poorly understood. METHODS: The expression of GOLPH3 and Wntless (Wls) in glioma tissues was examined by western blotting and immunohistochemistry. EdU incorporation assay and colony formation assay was used to examine the cell growth ability. The effect of GOLPH3 on Wls recycling, Wnt secretion and ß-catenin activity was detected using western blotting, immunofluorescence, RT-PCR, ELISA or luciferase assay. RESULTS: The protein levels of GOLPH3 and Wls were upregulated and positively correlated with each other in human glioma tissues. The promoting effect of GOLPH3 on glioma cell proliferation was partially mediated by Wls. In addition, GOLPH3 interacted with Wls and GOLPH3 down-regulation drove Wls into lysosome for degradation, inhibiting its recycling to golgi and the plasma membrane. Importantly, GOLPH3 down-regulation inhibited Wnt2b secretion and decreased ß-catenin level and transcription activity. CONCLUSIONS: This study provides a brand new evidence that GOLPH3 promotes glioma cell proliferation by facilitating Wls recycling and Wnt/ß-catenin signaling. Our findings suggest a rationale for targeting the GOLPH3-Wls-Wnt axis as a promising therapeutic approach for glioblastoma.

Electrochemical Properties of the LiNi0.6Co0.2Mn0.2O2 Cathode Material Modified by Lithium Tungstate under High Voltage.

An amount (5 wt %) of lithium tungstate (Li2WO4) as an additive significantly improves the cycle and rate performances of the LiNi0.6Co0.2Mn0.2O2 electrode at the cutoff voltage of 4.6 V. The 5 wt % Li2WO4-mixed LiNi0.6Co0.2Mn0.2O2 electrode delivers a reversible capacity of 199.2 mA h g-1 and keeps 73.1% capacity for 200 cycles at 1 C. It retains 67.4% capacity after 200 cycles at 2 C and delivers a discharge capacity of 167.3 mA h g-1 at 10 C, while those of the pristine electrode are only 44.7% and 87.5 mA h g-1, respectively. It is shown that the structure of the LiNi0.6Co0.2Mn0.2O2 cathode material is not affected by mixing Li2WO4. The introduced Li2WO4 effectively restrains the LiPF6 and carbonate solvent decomposition by consuming PF5 at high cutoff voltage, forming a stable cathode/electrolyte interface film with low resistance.