Berry Curvature Dipole Induced Giant Mid-Infrared Second-Harmonic Generation in 2D Weyl Semiconductor.

Due to its inversion-broken triple helix structure and the nature of Weyl semiconductor, 2D Tellurene (2D Te) is promising to possess a strong nonlinear optical response in the infrared region, which is rarely reported in 2D materials. Here, a giant nonlinear infrared response induced by large Berry curvature dipole (BCD) is demonstrated in the Weyl semiconductor 2D Te. Ultrahigh second-harmonic generation response is acquired from 2D Te with a large second-order nonlinear optical susceptibility (χ(2) ), which is up to 23.3 times higher than that of monolayer MoS2 in the range of 700-1500 nm. Notably, distinct from other 2D nonlinear semiconductors, χ(2) of 2D Te increases extraordinarily with increasing wavelength and reaches up to 5.58 nm V-1 at ≈2300 nm, which is the best infrared performance among the reported 2D nonlinear materials. Large χ(2) of 2D Te also enables the high-intensity sum-frequency generation with an ultralow continuous-wave (CW) pump power. Theoretical calculations reveal that the exceptional performance is attributed to the presence of large BCD located at the Weyl points of 2D Te. These results unravel a new linkage between Weyl semiconductor and strong optical nonlinear responses, rendering 2D Te a competitive candidate for highly efficient nonlinear 2D semiconductors in the infrared region.

2D Material Infrared Photonics and Plasmonics.

Two-dimensional (2D) materials including graphene, transition metal dichalcogenides, black phosphorus, MXenes, and semimetals have attracted extensive and widespread interest over the past years for their many intriguing properties and phenomena, underlying physics, and great potential for applications. The vast library of 2D materials and their heterostructures provides a diverse range of electrical, photonic, mechanical, and chemical properties with boundless opportunities for photonics and plasmonic devices. The infrared (IR) regime, with wavelengths across 0.78 µm to 1000 µm, has particular technological significance in industrial, military, commercial, and medical settings while facing challenges especially in the limit of materials. Here, we present a comprehensive review of the varied approaches taken to leverage the properties of the 2D materials for IR applications in photodetection and sensing, light emission and modulation, surface plasmon and phonon polaritons, non-linear optics, and Smith-Purcell radiation, among others. The strategies examined include the growth and processing of 2D materials, the use of various 2D materials like semiconductors, semimetals, Weyl-semimetals and 2D heterostructures or mixed-dimensional hybrid structures, and the engineering of light-matter interactions through nanophotonics, metasurfaces, and 2D polaritons. Finally, we give an outlook on the challenges in realizing high-performance and ambient-stable devices and the prospects for future research and large-scale commercial applications.

Sliding induced multiple polarization states in two-dimensional ferroelectrics.

When the atomic layers in a non-centrosymmetric van der Waals structure slide against each other, the interfacial charge transfer results in a reversal of the structure's spontaneous polarization. This phenomenon is known as sliding ferroelectricity and it is markedly different from conventional ferroelectric switching mechanisms relying on ion displacement. Here, we present layer dependence as a new dimension to control sliding ferroelectricity. By fabricating 3 R MoS2 of various thicknesses into dual-gate field-effect transistors, we obtain anomalous intermediate polarization states in multilayer (more than bilayer) 3 R MoS2. Using results from ab initio density functional theory calculations, we propose a generalized model to describe the ferroelectric switching process in multilayer 3 R MoS2 and to explain the formation of these intermediate polarization states. This work reveals the critical roles layer number and interlayer dipole coupling play in sliding ferroelectricity and presents a new strategy for the design of novel sliding ferroelectric devices.

Heterodimensional superlattice with in-plane anomalous Hall effect.

Superlattices-a periodic stacking of two-dimensional layers of two or more materials-provide a versatile scheme for engineering materials with tailored properties1,2. Here we report an intrinsic heterodimensional superlattice consisting of alternating layers of two-dimensional vanadium disulfide (VS2) and a one-dimensional vanadium sulfide (VS) chain array, deposited directly by chemical vapour deposition. This unique superlattice features an unconventional 1T stacking with a monoclinic unit cell of VS2/VS layers identified by scanning transmission electron microscopy. An unexpected Hall effect, persisting up to 380 kelvin, is observed when the magnetic field is in-plane, a condition under which the Hall effect usually vanishes. The observation of this effect is supported by theoretical calculations, and can be attributed to an unconventional anomalous Hall effect owing to an out-of-plane Berry curvature induced by an in-plane magnetic field, which is related to the one-dimensional VS chain. Our work expands the conventional understanding of superlattices and will stimulate the synthesis of more extraordinary superstructures.

Recent progress in the synthesis of novel two-dimensional van der Waals materials.

The last decade has witnessed the significant progress of physical fundamental research and great success of practical application in two-dimensional (2D) van der Waals (vdW) materials since the discovery of graphene in 2004. To date, vdW materials is still a vibrant and fast-expanding field, where tremendous reports have been published covering topics from cutting-edge quantum technology to urgent green energy, and so on. Here, we briefly review the emerging hot physical topics and intriguing materials, such as 2D topological materials, piezoelectric materials, ferroelectric materials, magnetic materials and twistronic heterostructures. Then, various vdW material synthetic strategies are discussed in detail, concerning the growth mechanisms, preparation conditions and typical examples. Finally, prospects and further opportunities in the booming field of 2D materials are addressed.

Visualizing Line Defects in non-van der Waals Bi2O2Se Using Raman Spectroscopy.

Atomic-layered materials, such as high-quality bismuth oxychalcogenides, which are composed of oppositely charged alternate layers grown using chemical vapor deposition, have attracted considerable attention. Their physical properties are well-suited for high-speed, low-power-consumption optoelectronic devices, and the rapid determination of their crystallographic characteristics is crucial for scalability and integration. In this study, we introduce how the crystallographic structure and quality of such materials can be projected through Raman spectroscopy analysis. Frequency modes at ∼55, ∼78, ∼360, and ∼434 cm-1 were detected, bearing out theoretical calculations from the literature. The low-frequency modes positioned at 55 and 78 cm-1 were activated by structural defects, such as grain boundaries and O-rich edges in the Bi2O2Se crystals, accompanied by sensitivity to the excitation energy. Furthermore, the line defects at ∼55 cm-1 exhibited a strong 2-fold polarization dependence, similar to graphene/graphite edges. Our results can help illuminate the mechanism for activating the Raman-active mode from the infrared active mode by defects, as well as the electronic structures of these two-dimensional layered materials. We also suggest that the nanoscale width line defects in Bi2O2Se can be visualized using Raman spectroscopy.

Mimicking Neuroplasticity via Ion Migration in van der Waals Layered Copper Indium Thiophosphate.

Artificial synaptic devices are the essential components of neuromorphic computing systems, which are capable of parallel information storage and processing with high area and energy efficiencies, showing high promise in future storage systems and in-memory computing. Analogous to the diffusion of neurotransmitter between neurons, ion-migration-based synaptic devices are becoming promising for mimicking synaptic plasticity, though the precise control of ion migration is still challenging. Due to the unique 2D nature and highly anisotropic ionic transport properties, van der Waals layered materials are attractive for synaptic device applications. Here, utilizing the high conductivity from Cu+ -ion migration, a two-terminal artificial synaptic device based on layered copper indium thiophosphate is studied. By controlling the migration of Cu+ ions with an electric field, the device mimics various neuroplasticity functions, such as short-term plasticity, long-term plasticity, and spike-time-dependent plasticity. The Pavlovian conditioning and activity-dependent synaptic plasticity involved neural functions are also successfully emulated. These results show a promising opportunity to modulate ion migration in 2D materials through field-driven ionic processes, making the demonstrated synaptic device an intriguing candidate for future low-power neuromorphic applications.

2D PtS nanorectangles/g-C3N4 nanosheets with a metal sulfide-support interaction effect for high-efficiency photocatalytic H2 evolution.

Cocatalyst design is a key approach to acquire high solar-energy conversion efficiency for photocatalytic hydrogen evolution. Here a new in situ vapor-phase (ISVP) growth method is developed to construct the cocatalyst of 2D PtS nanorectangles (a length of ∼7 nm, a width of ∼5 nm) on the surface of g-C3N4 nanosheets. The 2D PtS nanorectangles/g-C3N4 nanosheets (PtS/CN) show an unusual metal sulfide-support interaction (MSSI), which is evidenced by atomic resolution HAADF-STEM, synchrotron-based GIXRD, XPS and DFT calculations. The effect of MSSI contributes to the optimization of geometrical structure and energy-band structure, acceleration of charge transfer, and reduction of hydrogen adsorption free energy of PtS/CN, thus yielding excellent stability and an ultrahigh photocatalytic H2 evolution rate of 1072.6 µmol h-1 (an apparent quantum efficiency of 45.7% at 420 nm), up to 13.3 and 1532.3 times by contrast with that of Pt nanoparticles/g-C3N4 nanosheets and g-C3N4 nanosheets, respectively. This work will provide a new platform for designing high-efficiency photocatalysts for sunlight-driven hydrogen generation.

Controlled Synthesis of MoxW1-xTe2 Atomic Layers with Emergent Quantum States.

Recently, new states of matter like superconducting or topological quantum states were found in transition metal dichalcogenides (TMDs) and manifested themselves in a series of exotic physical behaviors. Such phenomena have been demonstrated to exist in a series of transition metal tellurides including MoTe2, WTe2, and alloyed MoxW1-xTe2. However, the behaviors in the alloy system have been rarely addressed due to their difficulty in obtaining atomic layers with controlled composition, albeit the alloy offers a great platform to tune the quantum states. Here, we report a facile CVD method to synthesize the MoxW1-xTe2 with controllable thickness and chemical composition ratios. The atomic structure of a monolayer MoxW1-xTe2 alloy was experimentally confirmed by scanning transmission electron microscopy. Importantly, two different transport behaviors including superconducting and Weyl semimetal states were observed in Mo-rich Mo0.8W0.2Te2 and W-rich Mo0.2W0.8Te2 samples, respectively. Our results show that the electrical properties of MoxW1-xTe2 can be tuned by controlling the chemical composition, demonstrating our controllable CVD growth method is an efficient strategy to manipulate the physical properties of TMDCs. Meanwhile, it provides a perspective on further comprehension and sheds light on the design of devices with topological multicomponent TMDC materials.

Van der Waals engineering of ferroelectric heterostructures for long-retention memory.

The limited memory retention for a ferroelectric field-effect transistor has prevented the commercialization of its nonvolatile memory potential using the commercially available ferroelectrics. Here, we show a long-retention ferroelectric transistor memory cell featuring a metal-ferroelectric-metal-insulator-semiconductor architecture built from all van der Waals single crystals. Our device exhibits 17 mV dec-1 operation, a memory window larger than 3.8 V, and program/erase ratio greater than 107. Thanks to the trap-free interfaces and the minimized depolarization effects via van der Waals engineering, more than 104 cycles endurance, a 10-year memory retention and sub-5 µs program/erase speed are achieved. A single pulse as short as 100 ns is enough for polarization reversal, and a 4-bit/cell operation of a van der Waals ferroelectric transistor is demonstrated under a 100 ns pulse train. These device characteristics suggest that van der Waals engineering is a promising direction to improve ferroelectronic memory performance and reliability for future applications.

Phase-controllable growth of ultrathin 2D magnetic FeTe crystals.

Two-dimensional (2D) magnets with intrinsic ferromagnetic/antiferromagnetic (FM/AFM) ordering are highly desirable for future spintronic devices. However, the direct growth of their crystals is in its infancy. Here we report a chemical vapor deposition approach to controllably grow layered tetragonal and non-layered hexagonal FeTe nanoplates with their thicknesses down to 3.6 and 2.8 nm, respectively. Moreover, transport measurements reveal these obtained FeTe nanoflakes show a thickness-dependent magnetic transition. Antiferromagnetic tetragonal FeTe with the Néel temperature (TN) gradually decreases from 70 to 45 K as the thickness declines from 32 to 5 nm. And ferromagnetic hexagonal FeTe is accompanied by a drop of the Curie temperature (TC) from 220 K (30 nm) to 170 K (4 nm). Theoretical calculations indicate that the ferromagnetic order in hexagonal FeTe is originated from its concomitant lattice distortion and Stoner instability. This study highlights its potential applications in future spintronic devices.

Controlled Growth of 3R Phase Tantalum Diselenide and Its Enhanced Superconductivity.

Transition metal dichalcogenides (TMDs) have become a playground for exploring rich physical phenomena like superconductivity and charge-density-waves (CDW). Here, we report the synthesis of the atom-thin TaSe2 with a rare 3R phase and enhanced superconductivity. The 3R phase is achieved by an ambient pressure chemical vapor deposition (CVD) strategy and confirmed by the high-resolution aberration-corrected STEM. Low-temperature transport data reveal an enhanced superconducting transition temperature (Tc) of 1.6 K in the 3R-TaSe2, which undoubtedly breaks the traditional perception of TaSe2 crystal as a material with Tc close to 0 K. This work demonstrates the strength of ambient pressure CVD in the exploration of crystal polymorphism, highlights a decisive role of layer stacking order in the superconducting transition, and provides fresh insights on manipulating crystal structures to gain access to enhanced Tc.

Bismuth Vacancy-Tuned Bismuth Oxybromide Ultrathin Nanosheets toward Photocatalytic CO2 Reduction.

Surface defects in semiconductors have a significant role to tune the photocatalytic reactions. However, the dominant studied defect type is oxygen vacancy, and metal cation vacancies are seldom explored. Herein, bismuth vacancies are engineered into BiOBr through ultrathin structure control and employed to tune photocatalytic CO2 reduction. VBi-BiOBr ultrathin nanosheets deliver a high selective CO generation rate of 20.1 µmol g-1 h-1 in pure water, without any cocatalyst, photosensitizer, and sacrificing reagent, roughly 3.8 times higher than that of BiOBr nanosheets. The increased CO2 reduction activity is ascribed to the tuned electronic structure, optimized CO2 adsorption, activation, and CO desorption process over VBi-BiOBr ultrathin nanosheets. This work offers new opportunities for designing surface metal vacancies to optimize the CO2 photoreduction performances.

Ultrathin Ruddlesden-Popper Perovskite Heterojunction for Sensitive Photodetection.

Thanks to their unique optical and electric properties, 2D materials have attracted a lot of interest for optoelectronic applications. Here, the emerging 2D materials, organic-inorganic hybrid perovskites with van der Waals interlayer interaction (Ruddlesden-Popper perovskites), are synthesized and characterized. Photodetectors based on the few-layer Ruddlesden-Popper perovskite show good photoresponsivity as well as good detectivity. In order to further improve the photoresponse performance, 2D MoS2 is chosen to construct the perovskite-MoS2 heterojunction. The performance of the hybrid photodetector is largely improved with 6 and 2 orders of magnitude enhancement for photoresponsivity (104 A W-1 ) and detectivity (4 × 1010 Jones), respectively, which demonstrates the facile charge separation at the interface between perovskite and MoS2 . Furthermore, the contribution of back gate tuning is proved with a greatly reduced dark current. The results demonstrated here will open up a new field for the investigation of 2D perovskites for optoelectronic applications.

Van der Waals negative capacitance transistors.

The Boltzmann distribution of electrons sets a fundamental barrier to lowering energy consumption in metal-oxide-semiconductor field-effect transistors (MOSFETs). Negative capacitance FET (NC-FET), as an emerging FET architecture, is promising to overcome this thermionic limit and build ultra-low-power consuming electronics. Here, we demonstrate steep-slope NC-FETs based on two-dimensional molybdenum disulfide and CuInP2S6 (CIPS) van der Waals (vdW) heterostructure. The vdW NC-FET provides an average subthreshold swing (SS) less than the Boltzmann's limit for over seven decades of drain current, with a minimum SS of 28 mV dec-1. Negligible hysteresis is achieved in NC-FETs with the thickness of CIPS less than 20 nm. A voltage gain of 24 is measured for vdW NC-FET logic inverter. Flexible vdW NC-FET is further demonstrated with sub-60 mV dec-1 switching characteristics under the bending radius down to 3.8 mm. These results demonstrate the great potential of vdW NC-FET for ultra-low-power and flexible applications.

Ultrasensitive 2D Bi2 O2 Se Phototransistors on Silicon Substrates.

2D materials are considered as intriguing building blocks for next-generation optoelectronic devices. However, their photoresponse performance still needs to be improved for practical applications. Here, ultrasensitive 2D phototransistors are reported employing chemical vapor deposition (CVD)-grown 2D Bi2 O2 Se transferred onto silicon substrates with a noncorrosive transfer method. The as-transferred Bi2 O2 Se preserves high quality in contrast to the serious quality degradation in hydrofluoric-acid-assisted transfer. The phototransistors show a responsivity of 3.5 × 104 A W-1 , a photoconductive gain of more than 104 , and a time response in the order of sub-millisecond. With back gating of the silicon substrate, the dark current can be reduced to several pA. This yields an ultrahigh sensitivity with a specific detectivity of 9.0 × 1013 Jones, which is one of the highest values among 2D material photodetectors and two orders of magnitude higher than that of other CVD-grown 2D materials. The high performance of the phototransistor shown here together with the developed unique transfer technique are promising for the development of novel 2D-material-based optoelectronic applications as well as integrating with state-of-the-art silicon photonic and electronic technologies.

Light-Tunable 1T-TaS2 Charge-Density-Wave Oscillators.

External stimuli-controlled phase transitions are essential for fundamental physics and design of functional devices. Charge density wave (CDW) is a metastable collective electronic phase featured by the periodic lattice distortion. Much attention has been attracted to study the external control of CDW phases. Although much work has been done in the electric-field-induced CDW transition, the study of the role of Joule heating in the phase transition is insufficient. Here, using the Raman spectroscopy, the electric-field-driven phase transition is in situ observed in the ultrathin 1T-TaS2. By quantitative evaluation of the Joule heating effect in the electric-field-induced CDW transition, it is shown that Joule heating plays a secondary role in the nearly commensurate (NC) to incommensurate (IC) CDW transition, while it dominants the IC-NC CDW transition, providing a better understanding of the electric field-induced phase transition. More importantly, at room temperature, light illumination can modulate the CDW phase and thus tune the frequency of the ultrathin 1T-TaS2 oscillators. This light tunability of the CDW phase transition is promising for multifunctional device applications.

In-Plane Ferroelectricity in Thin Flakes of Van der Waals Hybrid Perovskite.

Collective ferroic orders in van der Waals (vdW) crystals are receiving increasing attention in 2D materials research. The interplay between spatial quantum confinement and long-range cooperative phenomena not only broadens the horizon of fundamental physics, but also enables new device paradigms and functionalities built upon vdW heterostructures. Here, the in-plane ferroelectric properties in thin flakes of vdW hybrid perovskite bis(benzylammonium) lead tetrachloride are studied. The ordering of electric dipoles along the layer plane circumvents the depolarization field and preserves the ferroelectricity down to one unit-cell thickness or two vdW layers at room temperature. The superior performance of the electromechanical energy conversion is demonstrated by exploiting its in-plane piezoelectricity. The successful isolation of ferroelectric order in atomically thin vdW hybrid perovskite paves the way for nonvolatile flexible electronic devices with the cross-coupling between strain, charge polarization, and valley degrees of freedom.