RESUMEN
Surface reconstruction of electrocatalysts is an effective strategy to modulate the space charge distribution to enhance the electrocatalytic activity. The p-n heterostructured FeP/CoP-2D octagonal nanoplates were successfully constructed by cation-exchange method. The space charge effect caused by the p-n heterojunction accelerated the electron transfer, optimized the electronic structure, and improved the activity of the active sites during the oxygen evolution reaction process. As a result, FeP/CoP-2D required only 247 mV overpotential to achieve a current density of 10 mA cm-2 with a Tafel slope as low as 68 mV dec-1. Density-functional theory calculations confirmed that the construction of p-n heterojunctions can enhance the adsorption of *OH in the active centers and optimize the Gibbs free energy of the OER reaction. This study provides an effective and feasible strategy for constructing p-n heterojunctions to modulate the space charge state for optimizing the OER performance of electrocatalysts.
RESUMEN
Space charge transfer is an effective strategy to regulate the electron density of narrow bandgap semiconductors for enhancing electrocatalytic activity. Herein, the CoNiLDH/FeOOH n-n heterojunction hollow nanocages structure is constructed. The hollow structure provides abundant catalytic active sites and enhances mass transfer. The space charge region in the n-n heterojunction significantly promotes the adsorption of OH- and electron transfer; and the built-in electric field accelerates the electron transport, optimizes the electronic structure during the catalytic reaction process, and ensures the stability of surface charged active center sites in the heterojunction. Thus, CoNiLDH/FeOOH delivers an excellent oxygen evolution reaction (OER) overpotential of 250 mV to achieve a current density of 10 mA cm-2 with a small Tafel slope of 60 mV dec-1 , and superior electrocatalytic durability for 210 h at a high current density. Density functional theory calculations further verify that the space charge effect and built-in electric field in the n-n heterojunction of CoNiLDH/FeOOH can improve the electron transfer and lower the adsorption energy of OH- and the reaction energy barrier of the rate-determining step. This work provides a new fundamental understanding of the space charge effect of semiconductor heterojunction during the electrocatalytic process for developing more efficient OER electrocatalysts.
RESUMEN
Both sodium alginate and polyethyleneimine (PEI) have a good ability to adsorb heavy metal ions. PEI and sodium alginate were used as important precursors to synthesize positively charged carbon nanoparticles (p-CNDs) with hydroxyl and carboxyl, and negatively charged carbon nanoparticles (n-CNDs) with amino, respectively. The carbon nanoparticles (CNDs) aerogel with a large specific surface area and rich functional groups were constructed by self-assembled p-CNDs and n-CNDs via electrostatic attraction for adsorption of heavy metal ions in water. The results show that CNDs aerogel has good adsorption properties for Pb2+ (96%), Cu2+ (91%), Co2+ (86%), Ni2+ (82%), and Cd2+ (78%). Furthermore, the fluorescence emission intensity of CNDs aerogel will gradually decrease with the increase in the adsorption rate, indicating that it can detect the adsorption process synchronously. In addition, the cytotoxicity test reveals that CNDs have good biocompatibility and will not cause secondary damage to biological cells.
RESUMEN
Complex hollow structure nanostructure is regarded as the desired approach to alleviating the volume change of lithium-ion batteries (LIBs). In this work, ZnS/NiS/NiS2 composite with a distinctive hierarchical hollow porous urchin-like structure was prepared through pyrolysis of bimetal-organic frameworks obtained by one-step solvothermal and firstly used as anodes for LIBs. Varying the metal molar ratios allows the control of the surface area and pore size distribution of ZnS/NiS/NiS2. The obtained composite with a hollow porous urchin-like structure exhibits high porosity, large specific surface area, and strong synergetic interaction between ZnS and NiS/NiS2 can greatly buffer the volume expansion to keep the mechanical stability, ensure sufficient contact region between electrolyte and electrodes and shorten the Li+ transfer distance, meanwhile, the carbon derived from organic ligand of bimetal-organic frameworks also constructs the conductive matrix to accelerate electrons transfer. Based on the above outstanding properties, the obtained material delivers excellent rate capacity, superior reversible capacity, and long-cycle stability, especially disclosing a capacity of 615 mAh·g-1 after 300 cycles at 2 A·g-1. This work proposes a feasible strategy to obtain a unique hollow porous urchin-like structure through pyrolysis of bimetal organic frameworks, it can be extended to fabricate other mixed metal sulfides nanostructures with excellent electrochemical performances.
RESUMEN
The synthetic resin industry plays an important role in Volatile organic compounds (VOCs) emissions from industrial sources. However, owing to various products and their different emission characteristics, it is extremely difficult to study the source profiles of synthetic resins. In this study, the product-based pollution characteristics of VOCs from eight synthetic resin enterprises were investigated in Shanghai, China. Up to 133 VOCs were identified, including 106 based on the Photochemical Assessment Monitoring Stations (PAMS) and the Toxic Organics (TO-15) methods, and the remaining 27 were identified based on the new mass spectrometry analysis method. Aromatics (39.7%) and oxygenated VOCs (29.9%) accounted for a relatively high proportion in the synthetic resin industry. The product-based source profiles of each process unit are compiled. Generally, 1,4-dioxane, methyl isobutyl ketone, toluene, benzene, styrene, propane, and dichloromethane are the most abundant species in synthetic resin. Furthermore, the product-based ozone formation potentials (OFPs) and sources reactivity (SR) were calculated, the synthetic resin industry SR range from 0.3 g g-1 to 4.6 g g-1. Results suggest that toluene, benzene, styrene, propylene, ethylene, and oxygenated VOCs (including 1,4-dioxane, methyl isobutyl ketone, and aldehyde) should be preferentially controlled to reduce the OFPs. A three-level classification was established to evaluate the degree of photochemical pollution in different industries. Emission factors were calculated and ranked for eight synthetic resins. A VOC emission inventory of Chinese synthetic resin from 2005 to 2018 was compiled. It is estimated that the Chinese synthetic resin emitted 23.96 Gg of VOCs in 2018. In this study, a product-based VOC source profile and emission inventory of the synthetic resin industry were established for the first time. Finally, combined with product types, processes, and processing equipment, feasible recommendations for reducing VOC emissions in the synthetic resin industry are proposed.