RESUMEN
O3-type cathodes with sufficient Na content are considered as promising candidates for sodium-ion batteries (SIBs). However, these cathodes suffer from insufficient utilization of the active elements, restraining the delivered capacity. In this work, a high entropy strategy is applied to a typical O3 cathode NaLi0.1Ni0.35Mn0.55O2 (NLNM), forming a high entropy oxide NaLi0.1Ni0.15Cu0.1Mg0.1Ti0.2Mn0.35O2 (Na-HE). Results show that the active elements are fully exploited in Na-HE, with a two-electron reaction by Ni2+/4+ (further extended to Cu redox and even oxygen redox), vastly different from a one-electron reaction of Ni2+/3+ in NLNM. The full utilization of the active elements dramatically improves the output capacity of the cathode (122.6 mAh g-1 of Na-HE versus 81 mAh g-1 of NLNM). Moreover, the detrimental phase transition is well suppressed in Na-HE. The cathode exhibits high capacity retention of 88.7% after 100 cycles at 130 mA g-1, compared to only 36.4% for NLNM. These findings provide new insight for the design of new cathode materials for SIBs with high energy density and robust stability.
RESUMEN
Compared to lithium (Li) anode, the alloy/Li-alloy anodes show more compatible with sulfide solid electrolytes (SSEs), and are promising candidates for practical SSE-based all-solid-state Li batteries (ASSLBs). In this work, a porous Li-Al alloy (LiAl-p) anode is crafted using a straightforward mechanical pressing method. Various characterizations confirm the porous nature of such anode, as well as rich oxygen species on its surface. To the best knowledge, such LiAl-p anode demonstrates the best room temperature cell performance in comparison with reported Li and alloy/Li-alloy anodes in SSE-based ASSLBs. For example, the LiAl-p symmetric cells deliver a record critical current density of 6.0 mA cm-2 and an ultralong cycling of 5000 h; the LiAl-p|LiNi0.8Co0.1Mn0.1O2 full cells achieve a high areal capacity of 11.9 mAh cm-2 and excellent durability of 1800 cycles. Further in situ and ex situ experiments reveal that the porous structure can accommodate volume changes of LiAl-p and ensure its integrity during cycling; and moreover, a robust Li inorganics-rich solid electrolyte interphase can be formed originated from the reaction between SSE and surface oxygen species of LiAl-p. This study offers inspiration for designing high-performance alloy anodes by focusing on designing special architecture to alleviate volume change and constructing stable interphase.
RESUMEN
The further practical applications of Li-rich layered oxides are impeded by voltage decay and redox asymmetry, which are closely related to the structural degradation involving irreversible transition metal migration. It has been demonstrated that the superstructure ordering in O2-type materials can effectively suppress voltage decay and redox asymmetry. Herein, we elucidate that the absence of this superstructure ordering arrangement in a Ru-based O2-type oxide can still facilitate the highly reversible transition metal migration. We certify that Ru in superstructure-free O2-type structure can unlock a quite different migration path from Mn in mostly studied cases. The highly reversible migration of Ru helps the cathode maintain the structural robustness, thus realizing terrific capacity retention with neglectable voltage decay and inhibited oxygen redox asymmetry. We untie the knot that the absence of superstructure ordering fails to enable a high-performance Li-rich layered oxide cathode material with suppressed voltage decay and redox asymmetry.
RESUMEN
O3-type layered oxides for sodium-ion batteries (SIBs) have attracted extensive attention due to their inherently sufficient Na content, which have been considered as one of the most promising candidates for practical applications. However, influenced by the irreversible oxygen loss and the phase transition of O3-P3, the O3-type cathodes are always limited by low cutoff voltages (typically <4.2 V), restraining the full release of the capacity. In this study, we originally propose a dual-reductive coupling mechanism in a novel O3-type Na0.8Li0.2Fe0.2Ru0.6O2 cathode with the suppressed O3-P3 phase transition, aiming at improving the reversibility of oxygen redox at high voltage regions. Consequently, thanks to the formation of the strong covalent Fe/Ru-(O-O) bonding and inhibited slab gliding from the O to P phase, the cathode delivers the preeminent cyclic stability among the numerous O3-type cathodes within a high voltage of 4.5 V (a capacity retention of 95.4% after 100 cycles within 1.5-4.5 V). More importantly, HAADF-STEM and 7Li solid-state NMR results reveal the absence of transition metal migration and the presence of reversible Li migration during cycling, which further contributes to the improved structural robustness of the cathode. This study proposes an innovative strategy to boost the reversibility of anionic redox and to achieve stable high-voltage O3-type layered oxides, promoting the further development of SIBs.
RESUMEN
Organic materials have been considered a class of promising cathodes for metal-ion batteries because of their sustainability in preparation and source. However, organic batteries with high energy density and application potential require high discharge voltage, multielectron transfer, and long cycling performance. Here, we report an exceptional lithium-iodine (Li//I2) battery, in which the organic iodine (BPD-HI) cathode formed by the Lewis acid-base coordination between hydroiodic acid (HI) and 4,4'-bipyridine (BPD) allows 2e- transfer via the I-/I0 and I0/I+ redox couples. The I+ stabilized by BPD exhibits a high discharge voltage plateau at â¼3.4 V. Remarkably, from inorganic to organic iodine, it realizes a 2-fold increase in the achieved capacity, up to â¼400 mA h gI-1 (Theor. 422 mA h gI-1 and 245.6 mA h g-1 based on the mass of BPD-HI), and an over 2-fold energy density, reaching 1160 W h kgI-1 (Theor. 1324 W h kgI-1). More importantly, a capacity retention rate of 85% over 850 cycles is attained for the Li//BPD-HI battery at a current density of 2 A gI-1. This facile strategy enables positively charged I+ to be electrochemically active in a rechargeable lithium battery. The new redox chemistry discovered provides new insights for developing organic batteries with high energy density.
RESUMEN
The low ionic conductivity and high desolvation barrier are the main challenges for organic electrolytes in rechargeable metal batteries, especially at low temperatures. The general strategy is to couple strong-solvation and weak-solvation solvents to give balanced physicochemical properties. However, the two challenges described above cannot be overcome at the same time. Herein, we combine two different kinds of weakly solvating solvents with a very low desolvation energy. Interestingly, the synergy between the weak-solvation solvents can break the locally ordered structure at a low temperature to enable higher ionic conductivity compared to those with individual solvents. Thus, facile desolvation and high ionic conductivity are achieved simultaneously, significantly improving the reversibility of electrode reactions at low temperatures. The Na metal anode can be stably cycled at 2 mA cm-2 at -40 °C for 1000 h. The Na||Na3V2(PO4)3 cell shows the reversible capacity of 64 mAh g-1 at 0.3 C after 300 cycles at -40 °C, and the capacity retention is 86%. This strategy is applicable to other sets of weak-solvation solvents, providing guidance for the development of electrolytes for low-temperature rechargeable metal batteries.
RESUMEN
Phenyl ditelluride (PDTe) as a cathode material for rechargeable batteries has a low specific capacity (130.9 mAh g-1) due to limited active sites (two). To increase its capacity, additional active species need to be added to the structure of PDTe, like sulfur. Here, phenyl tellurosulfide (PDTeS) and phenyl tellurodisulfide (PDTeS2) can be formed via addition reactions and have specific capacities of 242.8 and 339.6 mAh g-1, respectively. The products are characterized by mass spectrometry and Raman spectroscopy. The Li/PDTeSn (n = 1-2) cells exhibit high material utilization (>85%) and unique redox mechanism. They can be cycled stably for more than 1000 cycles at an areal mass loading of 1.1 mg cm-2 and maintain capacity retentions of >72% after 100 cycles with PDTeSn loading of â¼6 mg cm-2. Moreover, the Li/PDTeS2 cell achieves a specific energy of up to 695 Wh kg-1 even when the electrolyte/PDTeS2 ratio is as low as 2.5 µL mg-1. The successful synthesis and application of PDTeSn prove that they are promising cathode materials for rechargeable lithium batteries.
RESUMEN
Organic electrodes that embrace multiple electron transfer and efficient redox reactions are desirable for green energy storage batteries. Here, a novel organic electrode material is synthesized, i.e., 2, 2'-((disulfanediylbis (4, 1-phenylene)) bis(azanediyl)) bis (naphthalene-1, 4-dione) (MNQ), through a simple click reaction between common carbonyl and organosulfur compounds and demonstrate its application potential as a high-performance cathode material in rechargeable lithium batteries. MNQ exhibits the aggregation effect of redox-active functional groups, the advantage of fast reaction kinetics from molecular structure evolution, and the decreased solubility in aprotic electrolytes resulting from intermolecular interactions. As expected, the MNQ electrode exhibits a high initial discharge capacity of 281.2 mA h g-1 at 0.5 C, equivalent to 97.9% of its theoretical capacity, and sustains stable long-term cycling performance of over 1000 cycles at 1 C. This work adds a new member to the family of organic electrode materials, providing performance-efficient organic molecules for the design of rechargeable battery systems, which will undoubtedly spark great interest in their applications.
RESUMEN
Redox flow batteries (RFBs) are promising electrochemical energy storage systems, offering vast potential for large-scale applications. Their unique configuration allows energy and power to be decoupled, making them highly scalable and flexible in design. Aqueous RFBs stand out as the most promising technologies, primarily due to their inexpensive supporting electrolytes and high safety. For aqueous RFBs, there has been a skyrocketing increase in studies focusing on the development of advanced functional materials that offer exceptional merits. They include redox-active materials with high solubility and stability, electrodes with excellent mechanical and chemical stability, and membranes with high ion selectivity and conductivity. This review summarizes the types of aqueous RFBs currently studied, providing an outline of the merits needed for functional materials from a practical perspective. We discuss design principles for redox-active candidates that can exhibit excellent performance, ranging from inorganic to organic active materials, and summarize the development of and need for electrode and membrane materials. Additionally, we analyze the mechanisms that cause battery performance decay from intrinsic features to external influences. We also describe current research priorities and development trends, concluding with a summary of future development directions for functional materials with valuable insights for practical applications.
RESUMEN
Organosulfides are promising candidates as cathode materials for the development of electric vehicles and energy storage systems due to their low-cost and high capacity properties. However, they generally suffer from slow kinetics because of the large rearrangement of S-S bonds and structural degradation upon cycling in batteries. In this paper, we reveal that soluble bis(2-pyrimidyl) disulfide (Pym2 S2 ) can be a high-rate cathode material for rechargeable lithium batteries. Benefiting from the superdelocalization of pyrimidyl group, the extra electrons prefer to be localized on the π* (pyrimidyl group) than σ* (S-S bond) molecular orbitals initially, generating the anion-like intermedia of [Pym2 S2 ]2- and thus decreasing the dissociation energy of the S-S bond. It makes the intrinsic energy barrier of dissociative electron transfer depleted, therefore the lithium half cell exhibits 2000â cycles at 5â C. This study provides a distinct pathway for the design of high-rate, long-cycle-life organic cathode materials.
RESUMEN
Organosulfides are promising high-capacity cathode materials for rechargeable lithium batteries. However, sluggish kinetics and inferior utilization impede its practical application in batteries. Rationally designing redox mediators and identifying their active moieties remain formidable challenges. Currently, as a rising star of transition metal dichalcogenides, few-layered MoSe2 decorated reduced graphene oxide (rGO) (MoSe2 @rGO) with high electronic conductivity and narrow energy band is used to manipulate electrocatalytic redox kinetics of organosulfides, thereby enhancing the battery performance. Here, an exotic MoSe2 @rGO is reported with Se defects material obtained from 2D MoSe2 growing on rGO for Li-dipentamethylenethiuram tetrasulfide (Li-PMTT) batteries. MoSe2 @rGO with Se defects has a large specific surface area, and sufficient pores, as well as exce llent catalytic ability for organosulfides conversion reactions. Therefore, the PMTT@MoSe2 @rGO cathode delivers a high reversible capacity of 405 mAh g-1 in the first cycle at 0.5 C and can maintain 238.3 mAh g-1 specific capacity after 300 cycles. This work offers an understanding of organosulfides electrochemistry toward fast and durable performance, holding great promise for developing practically feasible lithium-organosulfides battery material designs.
RESUMEN
Lithium sulfide (Li2 S) is considered as a promising cathode material for sulfur-based batteries. However, its activation remains to be one of the key challenges against its commercialization. The extraction of Li+ from bulk Li2 S has a high activation energy (Ea ) barrier, which is fundamentally responsible for the initial large overpotential. Herein, a systematic investigation of accelerated bulk Li2 S oxidation reaction kinetics was studied by using organochalcogenide-based redox mediators, in which phenyl ditelluride (PDTe) can significantly reduce the Ea of Li2 S and lower the initial charge potential. Simultaneously, it can alleviate the polysulfides shuttling effect by covalently anchoring the soluble polysulfides and converting them into insoluble lithium phenyl tellusulfides (PhTe-Sx Li, x>1). This alters the redox pathway and accelerates the reaction kinetics of Li2 S cathode. Consequently, the Li||Li2 S-PDTe cell shows excellent rate capability and enhanced cycling stability. The Si||Li2 S-PDTe full cell delivers a considerable capacity of 953.5â mAh g-1 at 0.2â C.
RESUMEN
Considerable efforts have been devoted to Li-S batteries, typically the soluble polysulfides shuttling effect. As a typical transition metal sulfide, MoS2 is a magic bullet for addressing the issues of Li-S batteries, drawing increasing attention. In this study, we introduce amorphous MoS3 as analogous sulfur cathode material and elucidate the dynamic phase evolution in the electrochemical reaction. The metallic 1T phase incorporated 2H phase MoS2 with sulfur vacancies (SVs-1T/2H-MoS2) decomposed from amorphous MoS3 achieves refined mixing with the "newborn" sulfur at the molecular level and supplies continuous conduction pathways and controllable physical confinement. Meanwhile, the in situ-generated SVs-1T/2H-MoS2 allows lithium intercalation in advance at high discharge voltage (≥1.8 V) and enables fast electron transfer. Moreover, aiming at the unbonded sulfur, diphenyl diselenide (PDSe), as a model redox mediator is applied, which can covalently bond sulfur atoms to form conversion-type organoselenosulfides, changing the original redox pathway of "newborn" sulfur in MoS3, and suppressing the polysulfides shuttling effect. It also significantly lowers the activation energy and thus accelerates the sulfur reduction kinetics. Thus, the in situ-formed intercalation-conversion hybrid electrode of SVs-1T/2H-MoS2 and organoselenosulfides realizes enhanced rate capability and superior cycling stability. This work provides a novel concept for designing high-energy-density electrode materials.
RESUMEN
Lithium-ion batteries have received significant attention over the last decades due to the wide application of portable electronics and increasing deployment of electric vehicles. In order to further enhance the performance of the batteries and overcome the capacity limitations of inorganic electrode materials, it is imperative to explore new cathode and functional materials for rechargeable lithium batteries. Organosulfur materials containing sulfur-sulfur bonds as a kind of promising organic electrode materials have the advantages of high capacities, abundant resources, tunable structures, and environmental benignity. In addition, organosulfur materials have been widely used in almost every aspect of rechargeable batteries because of their multiple functionalities. This review aims to provide a comprehensive overview on the development of organosulfur materials including the synthesis and application as cathode materials, electrolyte additives, electrolytes, binders, active materials in lithium redox flow batteries, and other metal battery systems. We also give an in-depth analysis of structure-property-performance relationship of organosulfur materials, and guidance for the future development of organosulfur materials for next generation rechargeable lithium batteries and beyond.
RESUMEN
We report a cyclic organosulfide synthesized via a condensation reaction. It can be cycled for 1000 times in half cells. Impressively, it can work with lithiated carbon paper as the anode in ether electrolyte in a full cell. This work shows the promising property of the organosulfide cathode in lithium batteries.
RESUMEN
The use of non-solvating, or as-called sparingly-solvating, electrolytes (NSEs), is regarded as one of the most promising solutions to the obstacles to the practical applications of Li-S batteries. However, it remains a puzzle that long-life Li-S batteries have rarely, if not never, been reported with NSEs, despite their good compatibility with Li anode. Here, we find the capacity decay of Li-S batteries in NSEs is mainly due to the accumulation of the dead Li2 S at the cathode side, rather than the degradation of the anodes or electrolytes. Based on this understanding, we propose an electrochemical strategy to reactivate the accumulated Li2 S and revive the dead Li-S batteries in NSEs. With such a facile approach, Li-S batteries with significantly improved cycling stability and accelerated dynamics are achieved with diglyme-, acetonitrile- and 1,2-dimethoxyethane-based NSEs. Our finding may rebuild the confidence in exploiting non-solvating Li-S batteries with practical competitiveness.
RESUMEN
As a high-energy-density cathode material, organosulfur has great potential for lithium batteries. However, their practical application is plagued by electronic/ionic insulation and sluggish redox kinetics. Hence, our strategy is to design a self-weaving, freestanding host material by introducing reduced graphene oxide-supported VS2 nanosheets (VS2 -rGO) and carbon nanotubes (CNTs) for lithium-phenyl tetrasulfide (Li-PTS) batteries. Unique host materials not only provide physicochemical confinement of active materials to boost the utilization but also catalyze the conversion of active materials to accelerate redox kinetics. Therefore, Li-PTS cell based on the 3D VS2 -rGO-CNTs (VSGC) host material shows excellent cyclability, with a slow capacity decay rate of 0.08% per cycle over 500 cycles at 0.5 C, and a high areal capacity of 3.1 mAh cm-2 with the PTS loading of 7.2 mg cm-2 . More importantly, the potential for practical applications is highlighted by the flexible pouch cell with a high areal capacity (4.1 mAh cm-2 ) and a low electrolyte/PTS ratio (3.5 µL mg-1 ). This work sheds light on elevating the electrochemical performance of Li-organosulfur batteries through the effective catalytic and adsorbed host material.
RESUMEN
Redox flow batteries (RFBs) are promising candidates for large-scale energy storage systems (ESSs) due to their unique architecture that can decouple energy and power. Aqueous RFBs based on organic molecules (AORFBs) work with a non-flammable and intrinsically safe aqueous electrolyte, and organic compounds are performed as redox couples. The application of redox-active organics tremendously expands the development space of RFBs owing to the highly tunable molecule structure. Molecular engineering enables the exceptional merits in solubility, stability, and redox potential of different organic molecules. Herein, this review summarizes the application of molecular engineering to several organic compounds, focusing on the fundamental overview of their physicochemical properties and design strategies. We discuss the electrochemical merits and performances along with the intrinsic properties of the designed organic components. Finally, we outline the requirements for rational design of innovative organics to motivate more valuable research and present the prospect of molecule engineering used in AORFBs.
RESUMEN
Organosulfides are promising cathodes for lithium batteries but often suffer from sluggish kinetics and low cycle stability. Herein, we report an electron-deficient organosulfide (ED-OS), which is formed via electrochemical oxidation of thiuram monosulfide, a low-cost sustainable material. The ED structure of (dimethylcarbamothioyl)thio can stretch the electron cloud of the adjacent CâS bond forming an S radical and lead to the cleavage of the S-C bond on the other side forming another S radical. The two (dimethylcarbamothioyl)thio radicals can form S-S bonds individually with low energy barriers, which thus are easy to break and could accommodate lithium ions with ultrafast reaction kinetics. It exhibits an ultralong cyclability of over 8000 cycles with a low capacity-fade rate of 0.0038% per cycle at a high rate of 10C in a lithium cell. In addition, we demonstrate that the same electrochemical oxidation can be applied to other thiuram compounds. This work provides new opportunities in developing ultrahigh-redox-activity organic electrode materials which can be started as needed.
Asunto(s)
Litio , Tiram , Suministros de Energía Eléctrica , Oxidación-Reducción , IonesRESUMEN
Phenyl tellurosulfide (PhS-TePh) was used to study the redox activity of the S-Te bond in lithium batteries. PhS-TePh formed a dynamic covalent network during lithiation, which provided a balance between responsiveness and stability to facilitate ion and electron transfer, enabling Li/PhS-TePh cells to achieve stable cycling and excellent rate performance in dilute electrolyte.