RESUMEN
OBJECTIVES: The development of bio-three-dimensional (bio-3D) printers has led to significant advances in regenerative medicine. Three-dimensional constructs, including spheroids, are maintained by extracellular matrix proteins secreted by cells so that the cells can be cultured in conditions closer to the physiological environment. This study aimed to create a useful 3D construct as a model of the dentin-pulp complex. METHODS: We examined the expression patterns of extracellular matrix proteins and cell proliferation areas in a 3D construct created using O9-1 cells derived from cranial neural crest cells of mice. The 3D construct was created by sticking the spheroid cultures onto a needle array using a bio-3D printer. RESULTS: Cell proliferation areas along with characteristic expression of tenascin C and DMP1 were evaluated. The expression of tenascin C and DMP1 was significantly enhanced in the spheroids compared to that in two-dimensional cultures. Moreover, cell proliferation regions and tenascin C expression were confirmed in the outer layer of spheroids in the embryonic stem cell medium, with insignificant DMP1 expression being observed. Interestingly, in a 3D construct cultured in calcification-induction medium, DMP1 expression was promoted, and DMP1-positive cells existed in the outermost layer without overlapping with tenascin C expression. CONCLUSIONS: The extracellular matrix proteins, tenascin C and DMP1, were expressed in a polarized manner in spheroids and 3D constructs, similar to the findings in the dental papilla. Therefore, these 3D constructs show potential as artificial models for studying odontogenesis.
Asunto(s)
Proliferación Celular , Proteínas de la Matriz Extracelular , Cresta Neural , Impresión Tridimensional , Tenascina , Cresta Neural/citología , Cresta Neural/metabolismo , Animales , Ratones , Tenascina/metabolismo , Proteínas de la Matriz Extracelular/metabolismo , Línea Celular , Esferoides Celulares/citología , Esferoides Celulares/metabolismo , Ingeniería de Tejidos/métodosRESUMEN
Introduction & objectives: Stem cell therapy for regenerative medicine has been sincerely investigated, but not still popular although some clinical trials show hopeful results. This therapy is suggested to be a representative candidate such as bone defect due to the accident, iatrogenic resection oncological tumor, congenital disease, and severe periodontitis in oral region. Recently, the Bio-3D printer "Regenova®" has been introduced as an innovative three-dimensional culture system, equipped scaffold-free bio-assembling techniques without any biomaterials. Therefore, we expected a mount of bone defect could be repaired by the structure established from this Bio-3D printer using osteogenic potential stem cells. Material & methods: The gingival tissue (1x1 mm) was removed from the distal part of the lower wisdom tooth of the patients who agreed our study. Human Gingival Mesenchymal Stem Cells (hGMSCs) were isolated from this tissue and cultured, since we confirmed the characteristics such as facile isolation and accelerated proliferation, further, strong potential of osteogenic-differentiation. Spheroids were formed using hGMSC in 96-well plates designed for low cell adhesion. The size of the spheroids was measured, and fluorescent immunostaining was employed to verify the expression of stem cell and apoptosis marker, and extracellular matrix. Following four weeks of bone differentiation, µCT imaging was performed. Calcification was confirmed by alizarin red and von Kossa staining. Fluorescent immunostaining was utilized to assess the expression of markers indicative of advanced bone differentiation. Results: We have established and confirmed the spheroids (â¼600 µm in diameter) constructed from human GMSCs (hGMSCs) still maintain stem cell potentials and osteogenic differentiation abilities from the results that CD73 and not CD34 were expressed as stem cell positive and negative marker, respectively. These spheroids were pilled up like cylindal shape to the "Kenzan" platform of Bio-3D printer and cultured for 7days. The cylindal structure originated from compound spheroids were tried to differentiate into bone four weeks with osteogenic induction medium. The calcification of bio-3D printed bone-like structures was confirmed by alizarin red and Von Kossa staining. In addition, µCT analysis revealed that the HU (Hounsfield Unit) of the calcified structures was almost identical to that of trabecular bone. Immunofluorescent staining detected osteocalcin expression, a late-stage bone differentiation marker. Conclusion: For the first time, we have achieved the construction of a scaffold-free, bone-like luminal structure through the assembly of spheroids comprised of this hGMSCs. This success is sure to be close to the induction of clinical application against regenerative medicine especially for bone defect disease.
RESUMEN
Transforming growth factor (TGF)-ß1 and prostaglandin E2 (PGE2) are humoral factors critically involved in the induction of immunosuppression in the microenvironment of various types of tumors, including melanoma. In this study, we identified a natural compound that attenuated TGF-ß1- and PGE2-induced immunosuppression and examined its effect on B16 melanoma growth in mice. By screening 502 natural compounds for attenuating activity against TGF-ß1- or PGE2-induced suppression of cytolysis in poly(I:C)-stimulated murine splenocytes, we found that betulin was the most potent compound. Betulin also reduced TGF-ß1- and PGE2-induced downregulation of perforin and granzyme B mRNA expression and cell surface expression of NKG2D and CD69 in natural killer (NK) cells. Cell depletion and coculture experiments showed that NK cells, dendritic cells, B cells, and T cells were necessary for the attenuating effects of betulin. Structure-activity relationship analysis revealed that two hydroxyl groups at positions C3 and C28 of betulin, their cis-configuration, and methyl group at C30 played crucial roles in its attenuating activity. In a subcutaneous implantation model of B16 melanoma in mice, intratumor administration of betulin and LY2157299, a TGF-ß1 type I receptor kinase inhibitor, significantly retarded the growth of B16 melanoma. Notably, betulin increased significantly the number of CD69 positive NK cells in tumor sites at early stages of post-tumor cell injection. Our data suggest that betulin inhibits the growth of B16 melanoma by enhancing NK cell activity through attenuating the immunosuppressive tumor microenvironment.
Asunto(s)
Dinoprostona , Melanoma Experimental , Factor de Crecimiento Transformador beta1 , Triterpenos , Animales , Dinoprostona/metabolismo , Células Asesinas Naturales , Melanoma Experimental/tratamiento farmacológico , Melanoma Experimental/metabolismo , Ratones , Factor de Crecimiento Transformador beta1/metabolismo , Triterpenos/farmacología , Microambiente TumoralRESUMEN
BACKGROUND: Although autogenous bone implantation is considered to be the gold standard for the reconstruction of bone defects, this approach remains challenging when treating extensive bone defects (EBDs). Therefore, artificial materials (AMs) such as artificial bone and scaffolds are often used for treating EBDs. Nevertheless, complications such as material failure, foreign body reaction, and infection are common. To overcome these issues, we aimed to develop a new treatment for an EBD using scaffold-free adipose-derived stromal cells (ADSCs) to fabricate chondrogenic/osteogenic-induced constructs without AMs. METHODS: ADSCs were obtained from the subcutaneous adipose tissue of 8-week-old female Wistar rats (n = 3) and assessed to determine their potential for multilineage differentiation into adipocytes (Oil Red O staining), chondrocytes (hematoxylin and eosin, Alcian blue, and Safranin O staining), and osteoblasts (Alizarin red and von Kossa staining). Spheroids (n = 320), each containing 3.0 × 104 ADSCs, were then used to fabricate scaffold-free cell constructs using a bio-3D printer with a needle array. The spheroids and constructs were stimulated with induction medium to induce chondrogenic and osteogenic differentiation. The induced cartilage- and bone-like constructs were finally evaluated using micro-computed tomography (µCT) and histological analysis. RESULTS: The collected ADSCs were capable of trilineage differentiation, and were successfully used to produce scaffold-free constructs. The fabricated constructs (n = 3) exhibited equivalent strength (load, 195.3 ± 6.1 mN; strength, 39.1 ± 1.2 kPa; and stiffness, 0.09 ± 0.01 N/mm) to that of soft tissues such as the muscles in the uninduced condition. In chondrogenic induction experiments, Alcian blue and Safranin O staining confirmed the differentiation of the constructs into cartilage, and cartilage tissue-like structures were produced. In the osteogenic induction experiment, Alizarin Red and von Kossa staining showed calcium salt deposition, and µCT images confirmed the same calcification level as that of the cortical bone. CONCLUSIONS: Scaffold-free constructs consisting of ADSCs without an AM were fabricated, and cartilage- and bone-like tissues were successfully generated, demonstrating their potential for bone reconstruction.
Asunto(s)
Osteogénesis , Ingeniería de Tejidos , Tejido Adiposo , Animales , Diferenciación Celular , Células Cultivadas , Femenino , Osteogénesis/fisiología , Impresión Tridimensional , Ratas , Ratas Wistar , Células del Estroma , Ingeniería de Tejidos/métodos , Andamios del Tejido , Microtomografía por Rayos XRESUMEN
Osteoarthritis is a leading cause of pain and joint immobility, the incidence of which is increasing worldwide. Currently, total joint replacement is the only treatment for end-stage disease. Scaffold-based tissue engineering is a promising alternative approach for joint repair but is subject to limitations such as poor cytocompatibility and degradation-associated toxicity. To overcome these limitations, a completely scaffold-free Kenzan method for bio-3D printing was used to fabricate cartilage constructs feasible for repairing large chondral defects. Human induced pluripotent stem cell (iPSC)-derived neural crest cells with high potential to undergo chondrogenesis through mesenchymal stem cell differentiation were used to fabricate the cartilage. Unified, self-sufficient, and functional cartilaginous constructs up to 6 cm2in size were assembled by optimizing fabrication time during chondrogenic induction. Maturation for 3 weeks facilitated the self-organisation of the cells, which improved the construct's mechanical strength (compressive and tensile properties) and induced changes in glycosaminoglycan and type II collagen expression, resulting in improved tissue function. The compressive modulus of the construct reached the native cartilage range of 0.88 MPa in the 5th week of maturation. This paper reports the fabrication of anatomically sized and shaped cartilage constructs, achieved by combining novel iPSCs and bio-3D printers using a Kenzan needle array technology, which may facilitate chondral resurfacing of articular cartilage defects.
Asunto(s)
Cartílago Articular , Células Madre Pluripotentes Inducidas , Diferenciación Celular , Condrocitos , Condrogénesis , Humanos , Impresión Tridimensional , Regeneración , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
Osteoarthritis (OA) is a major joint disease that promotes locomotor deficiency during the middle- to old-age, with the associated disability potentially decreasing quality of life. Recently, surgical strategies to reconstruct both articular cartilage and subchondral bone for OA have been diligently investigated for restoring joint structure and function. Adipose tissue-derived mesenchymal stem cells (AT-MSCs), which maintain pluripotency and self-proliferation ability, have recently received attention as a useful tool to regenerate osteocartilage for OA. In this review, several studies were described related to AT-MSC spheroids, with scaffold and scaffold-free three-dimensional (3D) constructs produced using "mold" or "Kenzan" methods for osteochondral regeneration. First, several examples of articular cartilage regeneration using AT-MSCs were introduced. Second, studies of osteochondral regeneration (not only cartilage but also subchondral bone) using AT-MSCs were described. Third, examples were presented wherein spheroids were produced using AT-MSCs for cartilage regeneration. Fourth, osteochondral regeneration following autologous implantation of AT-MSC scaffold-free 3D constructs, fabricated using the "mold" or "Kenzan" method, was considered. Finally, prospects of osteochondral regeneration by scaffold-free 3D constructs using AT-MSC spheroids were discussed.
Asunto(s)
Tejido Adiposo/citología , Huesos/fisiología , Células Madre Mesenquimatosas/citología , Regeneración/fisiología , Animales , Cartílago Articular/fisiología , Humanos , Andamios del Tejido/químicaRESUMEN
INTRODUCTION: Myopathy associated with anti-mitochondrial antibody (AMA) has recently been characterized as a distinct type of idiopathic inflammatory myopathy. The purpose of this study is to evaluate the pattern of involvement in thigh muscles in AMA myopathy using MRI. METHODS: Six patients with AMA myopathy were identified and their muscle MRI findings evaluated. RESULTS: On thigh muscle MRI, all six patients showed high signal intensity with short-tau inversion recovery that reflected disease activity mostly in the adductor magnus, called a "cuneiform sign." Fatty degeneration was also prominent in the adductor magnus, as well as the semimembranosus muscles. DISCUSSION: These characteristic changes on MRI contrast with those of other inflammatory myopathies. From these observations, we concluded that the localization pattern of the inflammatory changes in muscle MRI can contribute to the diagnosis of AMA myopathy.
Asunto(s)
Autoanticuerpos/inmunología , Enfermedades Autoinmunes/complicaciones , Enfermedades Autoinmunes/diagnóstico por imagen , Mitocondrias Musculares/inmunología , Miopatías Mitocondriales/diagnóstico por imagen , Miopatías Mitocondriales/etiología , Músculo Esquelético/diagnóstico por imagen , Muslo/diagnóstico por imagen , Tejido Adiposo/patología , Adulto , Anciano , Atrofia , Femenino , Granuloma/patología , Humanos , Hipertrofia , Imagen por Resonancia Magnética , Masculino , Persona de Mediana Edad , Músculo Esquelético/patología , Muslo/patologíaRESUMEN
Trisubstituted 5-organostibano-1H-1,2,3-triazoles (3a-f) were synthesized by the Cu-catalyzed azide-alkyne cycloaddition of various ethynylstibanes (1) with benzylazide (2) in the presence of CuBr (5 mol%) under aerobic conditions. The reaction of 5-stibanotriazoles with HCl afforded C5-unsubstituted 1,2,3-triazoles (4a-f). The antitumor activity of trisubstituted 5-organostibano-1H-1,2,3-triazoles (3a-f) and their 5-unsubstituted 1,2,3-triazoles (4a-f) were evaluated in several tumor cell lines. All 5-stibanotriazoles (3a-f) exerted an excellent antitumor activity. On the contrary, 5-unsubstituted 1,2,3-triazoles (4a-f) without a diphenylantimony group in the molecule exhibited very low antitumor activity compared with 5-stibanotriazoles (3a-f). In compounds of both the series, the substituted 4-butyl group appeared to decrease antitumor activity. However, results suggested that organometal (antimony) in the molecule was required for greater antitumor activity. In addition, all 5-stibanotriazoles (3a-f), but not all 5-unsubstituted 1,2,3-triazoles (4a-f), exhibited cytotoxicity in normal vascular endothelial cells derived from bovine aorta. Among the compounds (3b-e) that exhibited excellent antitumor activity, those with 4-methylphenyl (3b) and 1-cyclohexenyl (3e) showed relatively low cytotoxicity to vascular endothelial cells. Together, these results suggest that trisubstituted 5-organostibano-1H-1,2,3-triazoles, including compounds 3b and 3e, may serve as potential anticancer therapeutic drugs in the future.
Asunto(s)
Antineoplásicos/farmacología , Triazoles/farmacología , Animales , Antineoplásicos/síntesis química , Antineoplásicos/química , Bovinos , Línea Celular , Proliferación Celular/efectos de los fármacos , Relación Dosis-Respuesta a Droga , Ensayos de Selección de Medicamentos Antitumorales , Células Endoteliales/efectos de los fármacos , Humanos , Estructura Molecular , Relación Estructura-Actividad , Triazoles/síntesis química , Triazoles/químicaRESUMEN
Renal lymphangiectasia is a rare disorder of renal lymphatics, which is not well-known in terms of its natural history. A 54-year-old woman without any symptoms was referred to our department for huge cystic lesions surrounding bilateral kidneys. Imaging examinations with ultrasonography, and computed tomography suggested renal lymphangiectasia of bilateral kidneys. These cystic lesions were increased in size 12 years later, compared with previous magnetic resonance imaging. This finding suggested the slow growing nature of renal lympahngioectasia.
Asunto(s)
Enfermedades Renales/diagnóstico , Linfangiectasia/diagnóstico , Femenino , Estudios de Seguimiento , Humanos , Imagen por Resonancia Magnética , Persona de Mediana Edad , Imagen Multimodal , Factores de Tiempo , Tomografía Computarizada por Rayos XRESUMEN
Endometriosis is one of the most important causes of infertility; however the precise mechanism by which it affects female fertility is unclear. The objective of this study was to study the functional aspects of the uterus by evaluating uterine contractility in patients with endometrial cysts of the ovary. The study population was recruited from two institutes and consisted of 26 women (periovulatory (10), luteal (13), and menstrual phase (3); age range: 19-51 years) with untreated endometriosis; the control group consisted of 12 healthy women (age range: 22-41 years). Cine MR imaging obtained by a 1.5T magnet was visually evaluated at 12x faster than real speed, focusing on the presence of uterine peristalsis, the direction and frequency of peristalsis, and the presence of sustained uterine contractions. Uterine peristalsis was identifiable in 3/10, 3/13, and 3/3 of the endometriosis patients in each menstrual cycle, respectively, and in 11/12, 3/12, and 5/12 of their control subjects. Peristaltic detection rate and frequency were significantly less for the endometriosis group than for the controls in the periovulatory phase only (p<0.05). Sustained contractions were recognized in 19/36 control subjects and in 13/26 endometriosis patients, but the difference was not significant. Uterine peristalsis appears to be suppressed during the periovulatory phase in patients with endometriosis, which may have an adverse effect on sperm transport.
Asunto(s)
Endometriosis/fisiopatología , Procesamiento de Imagen Asistido por Computador , Imagen por Resonancia Cinemagnética , Quistes Ováricos/fisiopatología , Enfermedades del Ovario/fisiopatología , Peristaltismo/fisiología , Contracción Uterina/fisiología , Adulto , Endometriosis/diagnóstico , Endosonografía , Femenino , Humanos , Ciclo Menstrual/fisiología , Persona de Mediana Edad , Quistes Ováricos/diagnóstico , Enfermedades del Ovario/diagnóstico , Valores de Referencia , Útero/fisiopatologíaRESUMEN
BACKGROUND: In women of reproductive age, wavelike movements of the subendometrial myometrium, which is called uterine peristalsis, is considered to be related with fertility and menstrual problems. This is because the direction and frequency of peristalsis is known to be different among menstrual cycle phases. However, nothing is known as regarding diurnal variations. This study was designed to evaluate for the presence of a diurnal variation in uterine peristalsis. MATERIALS AND METHODS: MR studies were performed on 12 volunteers of reproductive age using a 1.5-T magnet, four times per day (at 0800, 1300, 1800 and 2300 h) during three (periovulatory, luteal and menstrual) phases of one menstrual cycle. Sixty images were obtained by half-Fourier acquisition single-shot turbo spin echo every 2 s and displayed on cine mode. Semiautomated software was utilized to discern the presence of peristaltic waves, as well as peristaltic frequency and direction. The presence of sustained contractions was visually determined. RESULTS: There was no statistically significant difference during the daytime for frequency and direction of uterine peristalsis for all menstrual cycle phases. Nonetheless, peristaltic frequency and direction fluctuated during each cycle. Statistically significant peristaltic suppression was observed in association with sustained contractions during the periovulatory phase. CONCLUSIONS: A diurnal variation was not observed for uterine peristalsis. Sporadic changes in peristaltic frequency were observed and appear to be closely related to sustained uterine contractions.
Asunto(s)
Ritmo Circadiano , Imagen por Resonancia Magnética , Ciclo Menstrual/fisiología , Peristaltismo/fisiología , Contracción Uterina/fisiología , Adulto , Femenino , Humanos , Procesamiento de Imagen Asistido por Computador , Útero/fisiologíaRESUMEN
UNLABELLED: 18F-fluorodeoxyglucose (FDG) positron emission tomography (PET) has become widely available and an important oncological technique. To evaluate the influence of PET on detection of bone metastasis, we compared the diagnostic accuracy of PET and conventional bone scintigraphy (BS) in a variety of cancer patients. METHODS: Consecutive ninety-five patients with various cancers, who received both PET and BS within one month, were retrospectively analyzed. A whole-body PET (from face to upper thigh) and a standard whole body BS were performed and these images were interpreted by two experienced nuclear medicine physicians with and without patient information using monitor diagnosis. Each image interpretation was performed according to 8 separate areas (skull, vertebra, upper limbs, sternum and clavicles, scapula, ribs, pelvis, and lower limbs) using a 5-point-scale (0: definitely negative, 1: probably negative, 2: equivocal, 3: probably positive, 4: definitely positive for bone metastasis). RESULTS: Twenty-one of 95 patients (22.1%) with 43 of 760 areas (5.7%) of bone metastases were finally confirmed. In untreated patients, 12 of 14 bone metastasis positive patients were detected by PET, while 9 of 14 were detected by BS. Three cases showed true positive in PET and false negative in BS due to osteolytic type bone metastases. In untreated cases, PET with and without clinical information showed better sensitivity than BS in patient-based diagnosis. For the purpose of treatment effect evaluation, PET showed better results because of its ability in the evaluation of rapid response of tumor cells to chemotherapy. Out of 10 cases of multiple-area metastases, 9 cases included vertebrae. There was only one solitary lesion located outside of FOV of PET scan in the femur, but with clinical information that was no problem for PET diagnosis. CONCLUSION: Diagnostic accuracy of bone metastasis was comparable in PET and BS in the present study. In a usual clinical condition, limited FOV (from face to upper thigh) of PET scan may not be a major drawback in the detection of bone metastases because of the relatively low risk of solitary bone metastasis in skull bone and lower limbs.