RESUMEN
To investigate the microscopic electrochemical dynamics of a stable trioxotriangulene (TOT) organic neutral π-radical on a graphite electrode surface, voltammetric and in situ infrared (IR) spectroelectrochemical studies were conducted using electrolyte solutions containing TOT monoanions. Upright columnar crystals (face-on alignment) of the TOT neutral radical were preferentially formed and dissolved in a rather reversible manner in the electrolyte with a low concentration of TOT monoanion under electrochemical conditions; however, more flat-lying columnar crystals (edge-on alignment) were formed in a higher concentration electrolyte. The flat-lying crystals remained on the graphite surface even at a fully reduced potential, owing to the lack of direct π-π interactions between the molecules and the graphite electrode. In situ IR attenuated total reflectance spectroscopy analyses successfully characterized the alignment of the columnar crystals of the TOT neutral radicals and their electrochemical behaviors, including the possible origins of the irreversible redox reaction of TOT on the graphite electrode.
RESUMEN
Deep learning using an end-to-end convolutional neural network (ConvNet) has been applied to several electroencephalography (EEG)-based brain-computer interface tasks to extract feature maps and classify the target output. However, the EEG analysis remains challenging since it requires consideration of various architectural design components that influence the representational ability of extracted features. This study proposes an EEG-based emotion classification model called the multi-kernel temporal and spatial convolution network (MultiT-S ConvNet). The multi-scale kernel is used in the model to learn various time resolutions, and separable convolutions are applied to find related spatial patterns. In addition, we enhanced both the temporal and spatial filters with a lightweight gating mechanism. To validate the performance and classification accuracy of MultiT-S ConvNet, we conduct subject-dependent and subject-independent experiments on EEG-based emotion datasets: DEAP and SEED. Compared with existing methods, MultiT-S ConvNet outperforms with higher accuracy results and a few trainable parameters. Moreover, the proposed multi-scale module in temporal filtering enables extracting a wide range of EEG representations, covering short- to long-wavelength components. This module could be further implemented in any model of EEG-based convolution networks, and its ability potentially improves the model's learning capacity.
Asunto(s)
Interfaces Cerebro-Computador , Electroencefalografía , Humanos , Electroencefalografía/métodos , Redes Neurales de la Computación , Emociones , Cuidados PaliativosRESUMEN
To elucidate the microscopic charge/discharge (delithiation/lithiation) mechanism at the interface of the electrolyte and organic cathode active material in the lithium-ion battery, we prepared a self-assembled monolayer (SAM) electrode of 1,4-benzoquinone terminated dihexyl disulfide (BQ-C6) on Au(111). An electrochemical setup with the BQ-C6 SAM as a working electrode and 1 M lithium bis(trifluoromethanesulfonyl)imide (Li-TFSI)/triethyleneglycol dimethylether (G3) as the electrolyte was used. We adopted the shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) method to obtain sufficient Raman signal of SAM for operando Raman spectroscopy measurements by the enhancement with â¼100 nm diameter Au particles coated with SiO2 shell (average thickness = 2 nm). By this method, we succeeded in acquiring the Raman signal of the molecular monolayer on the model electrode simulating the interface between the electrolyte and the organic active material. In the cyclic voltammogram, two peaks were observed during the reduction reaction (lithiation), whereas only one peak was detected in the course of the oxidation process (delithiation). Simultaneous operando SHINERS showed a two-step spectral shape change in lithiation and coinciding (or simultaneous) one-step recovery during delithiation to match cyclic voltammetry behavior. The results indicate an asymmetric lithiation/delithiation mechanism.
RESUMEN
Recently, ionic liquids (ILs) have attracted attention as prospective electrolytes for Li-ion batteries, with safe performance. Herein, the dynamics of the IL at the electrochemical interface, which is the key to the electrochemical reaction, was monitored using attenuated total reflectance far- and deep-ultraviolet (ATR-FUV-DUV) spectroscopy. An original measurement system, which combined an ATR-FUV-DUV spectrometer with a Kretschmann type (fully metal-coated prism) electrochemical setup, was assembled. Spectral measurements and assignments were performed for the 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([EMIM][TFSI])/Pt electrode (â¼7 nm) interface. The incident light in the FUV and DUV regions entered a measurement system comprising an [EMIM][TFSI]/Pt electrode/ATR sapphire prism, and the potential-dependent absorption spectra were measured in the 180-450 nm range. This in-situ spectroscopic technique is unique in that the electronic transition spectra of the interfacial IL can be obtained. By switching the applied potentials, temporal spectral changes (i.e. relaxation signals) were tracked at wavelengths of 450 nm and 221 nm, where the direct electronic absorption of the IL was active and inactive, respectively. Comparing these relaxation times, it was revealed that the absorption signal at 221 nm changed more slowly than that at 450 nm. This indicated that the molecular conformations that affected the electronic absorption of the interfacial ILs changed slowly. Considering the surface-normal dipole selection rule for molecules on a metal surface, it is suggested that the slow changes in the molecular conformations can be ascribed to the potential-dependent interfacial orientations of [EMIM]+.
RESUMEN
STUDY OBJECTIVES: The present study investigated the hypothesis that subjects with primary sleep bruxism (SB) exhibit masseter and cortical hyperactivities during quiet sleep periods that are associated with a high frequency of rhythmic masticatory muscle activity (RMMA). METHODS: Fifteen SB and ten control participants underwent polysomnographic recordings. The frequencies of oromotor events and arousals and the percentage of arousals with oromotor events were assessed. Masseter muscle tone during sleep was quantified using a cluster analysis. Electroencephalography power and heart rate variability were quantified and then compared between the two groups and among sleep stages. RESULTS: The frequency of RMMA and percentage of arousals with RMMA were significantly higher in SB subjects than in controls in all stages, while these variables for nonrhythmic oromotor events did not significantly differ between the groups. In SB subjects, the frequency of RMMA was the highest in stage N1 and the lowest in stages N3 and R, while the percentage of arousals with RMMA was higher in stage N3 than stages N1 and R. The cluster analysis classified masseter activity during sleep into two clusters for masseter tone and contractions. Masseter muscle tone showed typical stage-dependent changes in both groups but did not significantly differ between the groups. Furthermore, no significant differences were observed in electroencephalography power or heart rate variability between the groups. CONCLUSION: Young SB subjects exhibited sleep stage-dependent increases in the responsiveness of RMMA to transient arousals, but did not show masseter or cortical hyperactivity during sleep.
Asunto(s)
Bruxismo del Sueño , Electromiografía , Humanos , Músculo Masetero , Músculos Masticadores , Polisomnografía , Fases del Sueño/fisiologíaRESUMEN
PURPOSE: This study aims to confirm the usefulness of active acoustic emission (Active AE) for reproducible and non-invasive generation of physical external force which is required for conventional AE. METHODS: Experiment 1: A root dentin-resin adhesive interface was observed. The post space was filled with a dual-cure resin composite core material with and without adhesive. The vibration characteristics of the data obtained from the time-frequency analysis were evaluated. Experiment 2: A crown-abutment tooth adhesive interface was observed. Adhesive resin cement was used for luting the crown and adhesion states in the same specimen over time were analyzed with three measurements: at trial-fitting, immediately after luting, and 2 weeks after luting. Data were subjected to time-frequency analysis and relationships between amplitude (indicating loudness) and frequency (indicating the sound component) were analyzed. RESULTS: Experiment 1: Time-frequency analysis confirmed multiple peak frequencies for each specimen without adhesive and monomodal peak frequency in all specimens using adhesive. Experiment 2: Two weeks after luting, all specimens showed a single major peak except one which showed multiple weak peaks. The three-dimensional visualization of time-frequency analysis revealed one specimen with multiple weak peaks while all others displayed a single, low-amplitude band at 2 weeks after luting. CONCLUSION: The state of the adhesive interface can be evaluated using active AE. This basic technique may prove useful to evaluate changes in the adhesive interface of prostheses over time.
Asunto(s)
Recubrimiento Dental Adhesivo , Recubrimientos Dentinarios , Acústica , Resinas Compuestas , Cementos Dentales , Dentina , Ensayo de Materiales , Cementos de Resina , Estrés Mecánico , Propiedades de SuperficieRESUMEN
Purpose The state of adhesion between root dentin and a resin composite core material was inspected using acoustic emission (AE).Methods A total of 14 human incisors and premolars were used to prepare "no-adhesive group" and "adhesive group" specimens. For "adhesive group" specimens, a bonding agent was applied to root canal dentin. The entire post space was subsequently filled with a resin composite for both specimen groups. The prepared specimens were fixed onto a jig on which an AE sensor was installed. A zirconia ball was used for the impact test, and a vibration wave generated by the collision was measured by the system using an AE sensor. The obtained data were subjected to time-frequency analysis using analysis software (LabVIEW), and the relationship between the amplitude indicating the loudness and the frequency indicating the sound component was analyzed.Results Zirconia-ball collision tests using AE revealed differences between the groups with respect to the waveform of vibration waves transmitted to the root dentin through the root dentin-resin interface. The time-frequency analysis of the obtained data confirmed that multiple peaks were observed for each specimen in the no-adhesive group, whereas a single characteristic vibration peak was observed for all specimens in the adhesive group.Conclusions The state of the adhesive interface was successfully evaluated by AE. This demonstration is expected to lead to the development of a device that can detect problems at the bonding interface between the prostheses and tooth substances.
Asunto(s)
Recubrimiento Dental Adhesivo , Recubrimientos Dentinarios , Acústica , Dentina , Humanos , Ensayo de Materiales , Cementos de ResinaRESUMEN
Two of the biggest challenges in building models for detecting emotions from electroencephalography (EEG) devices are the relatively small amount of labeled samples and the strong variability of signal feature distributions between different subjects. In this study, we propose a context-generalized model that tackles the data constraints and subject variability simultaneously using a deep neural network architecture optimized for normally distributed subject-independent feature embeddings. Variational autoencoders (VAEs) at the input level allow the lower feature layers of the model to be trained on both labeled and unlabeled samples, maximizing the use of the limited data resources. Meanwhile, variational regularization encourages the model to learn Gaussian-distributed feature embeddings, resulting in robustness to small dataset imbalances. Subject-adversarial regularization applied to the bi-lateral features further enforces subject-independence on the final feature embedding used for emotion classification. The results from subject-independent performance experiments on the SEED and DEAP EEG-emotion datasets show that our model generalizes better across subjects than other state-of-the-art feature embeddings when paired with deep learning classifiers. Furthermore, qualitative analysis of the embedding space reveals that our proposed subject-invariant bi-lateral variational domain adversarial neural network (BiVDANN) architecture may improve the subject-independent performance by discovering normally distributed features.
Asunto(s)
Electroencefalografía , Emociones , Humanos , Redes Neurales de la ComputaciónRESUMEN
The interface of organic semiconductor films is of particular importance with respect to various electrochemical devices such as transistors and solar cells. In this study, we developed a new spectroscopic system, namely electrochemical attenuated total reflectance ultraviolet (EC-ATR-UV) spectroscopy, which can access the interfacial area. Ionic liquid-gated organic field-effect transistors (IL-gated OFETs) were successfully fabricated on the ATR prism. Spectral changes of the organic semiconductor were then investigated in relation to the gate voltage application and IL species, and the magnitude of spectral changes was found to correlate positively with the drain current. Additionally, the Stark shifts of not only the organic semiconductor, but also of the IL on the organic semiconductor films were detected. This new method can be applied to other electrochemical devices such as organic thin film solar cells, in which the interfacial region is crucial to their functioning.
RESUMEN
The electronic states of N-butyl-N-methylpyrrolidinium dicyanamide ([BMP][DCA]), a solvated ionic liquid, around Li+ were investigated using attenuated total reflectance far-ultraviolet and deep-ultraviolet (ATR-FUV-DUV) spectroscopy. The absorption bands ascribed to the [DCA]- were blue-shifted as the Li+ concentration increased, and the origin of the shift was explained by the energetic destabilization of the final (excited) molecular orbital using time-dependent density functional theory (TD-DFT) calculations. Using the multivariate curve resolution-alternating least squares (MCR-ALS) algorithm, the obtained spectra were decomposed into two types of [DCA]- at electronic state level, which were categorised as pure [BMP][DCA] and [DCA]- affected by Li+. Our results revealed that the number of [DCA]- with electronic states affected by a Li+, which was termed the electronic coordination number, was â¼5. This value was different from the coordination number within the first solvation layer, which was â¼4. Combining the TD-DFT with molecular dynamics simulations, we demonstrated that one [DCA]- outside the first solvation layer had a different electronic state from that of pure [BMP][DCA]. This is the first successful study that combines ATR-FUV-DUV spectroscopy with MCR-ALS calculations to build a solvation model that describes the electronic states.
RESUMEN
We report the rapid improvement in the carrier mobility of the electric double layer field-effect transistor based on the ionic liquid (IL)/pentacene single crystal interface. Generally, the surface oxidation of the pentacene single crystal is unavoidable, and the considerable degradation restricts the performance of the field-effect transistor. However, the formation of the IL/pentacene single crystal interface resolves this problem by increasing the carrier mobility by approximately twice the initial value within a few hours. Furthermore, frequency-modulation atomic force microscopy revealed that the aforementioned rapid improvement is attributed to the appearance of a clean and flat surface of the pentacene single crystal via the defect-induced spontaneous dissolution of pentacene molecules into the IL.
RESUMEN
Focusing on the electric double layer formed at aqueous solution/graphite electrode interfaces, we investigated the relationship between the mobility of interfacial water and its hydrogen bonding networks by using molecular dynamics simulations. We focused on the mobility of the first hydration layer constructed nearest to the electrode. The mobility was determined by calculating the diffusion coefficient which showed an opposite trend to that of the applied potential polarity. The mobility decreased upon positive potentials while showing an increase upon negative potentials, which is rationalized by the strength of the interfacial hydrogen bonding networks.
RESUMEN
Recently, ionic liquids at the electrode/ionic liquid interface have been intensively studied because they are promising as novel alternatives to traditional electrolyte solutions that are both safe and functional. In this study, we constructed an attenuated total-reflectance spectroscopic system that operates under electrochemical conditions in order to investigate the electronic states of ionic liquids near the electrode surface. Upon application of voltage to an ionic liquid consisting of imidazolium cations and iodide anions, electronic transition spectra in the 150-450 nm range varied. In particular, absorbance due to charge transfer from the anion to the cation drastically increased at positive potentials. The extent of spectral change and contact area between the electrode and the ionic liquid were positively correlated, and thus spectral variations reflected the behavior of the interfacial ionic liquid on the electrode. In addition to potential dependence, time dependence and hysteresis were also investigated. The newly developed system can be applied not only for ionic liquids but foreseeably also for various electrochemical materials such as organic semiconductors.
RESUMEN
An understanding of the characteristics of ionic liquid/graphite interfaces is highly important for electrochemical devices such as batteries and capacitors. In this paper, we report microscopic studies of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMIM-TFSI) on charged graphite electrodes using molecular dynamics simulations to reveal the two-dimensional arrangement of the ions and their dynamics at the interfaces. Analyses of surface distribution and mobility of ions revealed that the ion arrangement changes from a bilayer type to a checkerboard type with increasing applied potential. Whereas the bilayer type arrangement increases the ionic mobility parallel to the interfaces with the negative potential, the ions arranged in the checkerboard type tend to localize because of the increased lateral electrostatic interactions. Furthermore, we revealed that the inhomogeneity of ionic distribution at the positive potential propagates up to a few nanometers from the interface.
RESUMEN
Electric double-layer transistors based on ionic liquid/organic semiconductor interfaces have been extensively studied during the past decade because of their high carrier densities at low operation voltages. Microscopic structures and the dynamics of ionic liquids likely determine the device performance; however, knowledge of these is limited by a lack of appropriate experimental tools. In this study, we investigated ionic liquid/organic semiconductor interfaces using molecular dynamics to reveal the microscopic properties of ionic liquids. The organic semiconductors include pentacene, rubrene, fullerene, and 7,7,8,8-tetracyanoquinodimethane (TCNQ). While ionic liquids close to the substrate always form the specific layered structures, the surface properties of organic semiconductors drastically alter the ionic dynamics. Ionic liquids at the fullerene interface behave as a two-dimensional ionic crystal because of the energy gain derived from the favorable electrostatic interaction on the corrugated periodic substrate.
RESUMEN
Despite providing rich information on electronic states, the far-ultraviolet (FUV, <200 nm) and deep-ultraviolet (DUV, <300 nm) absorption spectra of ionic liquids (ILs) are difficult to obtain without saturation due to very strong analyte absorbance. Herein, FUV-DUV spectra of selected ILs were systematically and easily recorded using an attenuated total reflectance spectrometer and rationalized based on quantum chemical calculations. ILs containing pyrrolidinium or ammonium cations and fluorine-containing anions exhibited weak absorbance below 200 nm that could not be measured by conventional UV-Vis spectroscopy, whereas the corresponding imidazolium-based ILs showed distinct absorption bands that could be reproduced by single-cation-model calculations. On the other hand, imidazolium-based ILs with halide anions showed characteristic charge transfer (CT)-related absorbances. Thus, the above spectroscopic investigations contribute to a fundamental understanding of the electronic processes (e.g., intramolecular excitations and CT transitions) and molecular designs used in electrochemical devices.
RESUMEN
It has been observed that the properties of room temperature ionic liquids near solid substrates are different from those of bulk liquids, and these properties play an important role in the development of catalysts, lubricants, and electrochemical devices. In this paper, we report microscopic studies of ionic liquid/solid interfaces performed using molecular dynamics simulations. The structural and dynamic properties of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMIM-TFSI) on mica and graphite interfaces were thoroughly investigated to elucidate the microscopic origins of the formation of layered structures at the interfaces. Our investigation included the observation of structural and orientational changes of ions as a function of distance from the surfaces, and contour mappings of ions parallel and perpendicular to the surfaces. By virtue of such detailed analyses, we found that, during the 5 ns simulation, the closest layer of BMIM-TFSI behaves as a two-dimensional ionic crystal on mica and as a liquid or liquid crystal on graphite.
RESUMEN
The electrochemical properties of chemically modified electrodes have long been a significant focus of research. Although the electronic states are directly related to the electrochemical properties, there have been only limited systematic efforts to reveal the electronic structures of adsorbed redox molecules with respect to the local environment of the redox center. In this study, density functional theory (DFT) calculations were performed for ferrocene-terminated self-assembled monolayers with different electron-donating abilities, which can be regarded as the simplest class of chemically modified electrodes. We revealed that the local electrostatic potentials, which are changed by the electron donating/withdrawing functional groups at the ferrocene moiety and the dipole field of coadsorbed inert molecules, practically determine the density of states derived from the highest occupied molecular orbital (HOMO) and its vicinities (HOMO-1 and HOMO-2) with respect to the electrode Fermi level. Therefore, to design new, sophisticated electrodes with chemical modification, one should consider not only the electronic properties of the constituent molecules, but also the local electrostatic potentials formed by these molecules and coadsorbed inert molecules.
RESUMEN
An ionic liquid forms a characteristic solvation structure on a substrate. For example, when the surface of the substrate is negatively or positively charged, cation and anion layers are alternately aligned on the surface. Such a solvation structure is closely related to slow diffusion, high electric capacity, and chemical reactions at the interface. To analyze the periodicity of the solvation structure, atomic force microscopy is often used. The measured force curve is generally oscillatory and its characteristic oscillation length corresponds not to the ionic diameter, but to the ion-pair diameter. However, the force curve is not the solvation structure. Hence, it is necessary to know the relationship between the force curve and the solvation structure. To find physical essence in the relationship, we have used statistical mechanics of a simple ionic liquid. We found that the basic relationship can be expressed by a simple equation and the reason why the oscillation length corresponds to the ion-pair diameter. Moreover, it is also found that Derjaguin approximation is applicable to the ionic liquid system.
RESUMEN
A good sleep is important for a healthy life. Recently, several consumer sleep devices have emerged on the market claiming that they can provide personal sleep monitoring; however, many of them require additional hardware or there is a lack of scientific evidence regarding their reliability. In this paper we proposed a novel method to assess the sleep quality through sound events recorded in the bedroom. We used subjective sleep quality as training label, combined several machine learning approaches including kernelized self organizing map, hierarchical clustering and hidden Markov model, obtained the models to indicate the sleep pattern of specific quality level. The proposed method is different from traditional sleep stage based method, provides a new aspect of sleep monitoring that sound events are directly correlated with the sleep of a person.