RESUMEN
Single-molecule studies offer deep insights into the essence of chemistry, biology, and materials science. Despite significant advances in single-molecule experiments, the precise regulation of the flow of single small molecules remains a formidable challenge. Herein, we present a flexible glass-based hybrid nanofluidic device that can precisely block, open, and direct the flow of single small molecules in nanochannels. Additionally, this approach allows for real-time tracking of regulated single small molecules in nanofluidic conditions. Therefore, the dynamic behaviors of single small molecules confined in different nanofluidic conditions with varied spatial restrictions are clarified. Our device and approach provide a nanofluidic platform and mechanism that enable single-molecule studies and applications in actively regulated fluidic conditions, thus opening avenues for understanding the original behavior of individual molecules in their natural forms and the development of single-molecule regulated chemical and biological processes in the future.
RESUMEN
We demonstrated a pressure driven energy harvesting device using water and that features a glass filter with porous channels. We employed powder sintering to fabricate the glass filter (2 cm diameter, 3 mm thickness) by packing a powder of borosilicate glass particles into a carbon mold and then thermally fusing this at 700°C under pressure. In constant flow rate experiment, the optimum average pore radius of the filter for power generation was 12 µm. Using this filter, power of 3.8 mW (27 V, 0.14 mA, 0.021% energy efficiency) was generated at a water flow speed of 50 mm/s. In constant pressure experiment, a power generator was equipped with a foot press unit with a 60 kg weight (830 kPa) and 50 mL of water. The optimum average pore radius for power generation in this experiment was 12 µm and power of 4.8 mW (18 V, 0.26 mA, 0.017% energy efficiency) was generated with 1.7 s duration. This was enough power for direct LED lighting and the capacitors could store enough energy to rotate a fan and operate a wireless communicator. Our pressure driven device is suitable for energy harvesting from slow movements like certain human physiological functions, e.g. walking.
RESUMEN
African chironomid (Polypedilum vanderplanki) larvae can suspend their metabolism by undergoing severe desiccation and then resume this activity by simple rehydration. We present a microdevice using interdigital comb electrodes to detect the larval motion using the natural surface charge of the living larvae in water. The larvae were most active 2 h after soaking them in water at 30°C; they exhibited motions with 2 Hz frequency. This was comparable to the signal obtained from the microdevice via fast Fourier transform (FFT) processing. The amplitude of the voltage and current were 0.11 mV and 730 nA, respectively. They would be enough to be detected by a low power consumption microcomputer. Temperature and pH sensing were demonstrated by detecting the vital motions of the revived larvae under different conditions. This multi-functional biosensor will be a useful microdevice to search for survivable locations under extreme environmental conditions like those on other planets.
RESUMEN
Bio-actuators and sensors are increasingly employed in microscale devices for numerous applications. Unlike other artificial devices actuated by living cells or tissues, here we introduce a microvalve system actuated by the stimuli-responsive action plant, Mimosa pudica (sleepy plant). This system realizes the control of the valve to open and close by dropping and recovering responses of Mimosa pudica branch upon external physical stimulations. The results showed that one matured single uncut Mimosa pudica branch produced average force of 15.82 ± 0.7 mN. This force was sufficient for actuating and keeping the valve open for 8.46 ± 1.33 min in a stimulation-recovering cycle of 30 min. Additionally, two separately cut Mimosa pudica branches were able to keep the valve open for 2.28 ± 0.63 min in a stimulating-recovering cycle of 20min. The pressure resistance and the response time of the valve were 4.2 kPa and 1.4 s, respectively. This demonstration of plant-microfluidics integration encourages exploiting more applications of microfluidic platforms that involve plant science and plant energy harvesting.
Asunto(s)
Mimosa , Fenómenos Mecánicos , Microfluídica , PlantasRESUMEN
Compared with polymer microfluidic devices, glass microfluidic devices have advantages for diverse lab-on-a-chip applications due to their rigidity, optical transparency, thermal stability, and chemical/biological inertness. However, the bonding process to construct glass microfluidic devices usually involves treatment(s) like high temperature over 400 °C, oxygen plasma or piranha solution. Such processes require special skill, apparatus or harsh chemicals, and destroy molecules or cells in microchannels. Here, we present a simple method for glass-glass bonding to easily form microchannels. This method consists of two steps: placing water droplets on a glass substrate cleaned by neutral detergent, followed by fixing a cover glass plate on the glass substrate by binding clips for a few hours at room temperature. Surface analyses showed that the glass surface cleaned by neutral detergent had a higher ratio of SiOH over SiO than glass surfaces prepared by other cleaning steps. Thus, the suggested method could achieve stronger glass-glass bonding via dehydration condensation due to the higher density of SiOH. The pressure endurance reached over 600 kPa within 6 h of bonding, which is sufficient for practical microfluidic applications. Moreover, by exploiting the reversibility of this bonding method, cell recoveries after cultivating cells in a microchannel were demonstrated. This new bonding method can significantly improve both the productivity and the usability of glass microfluidic devices and extend the possibility of glass microfluidic applications in future.
Asunto(s)
Dispositivos Laboratorio en un Chip , Técnicas Analíticas Microfluídicas , Vidrio , Microfluídica , PolímerosRESUMEN
OBJECTIVE: Production of genetically modified mice including Knock-out (KO) or Knock-in (KI) mice is necessary for organism-level phenotype analysis. Embryonic stem cell (ESC)-based technologies can produce many genetically modified mice with less time without crossing. However, a complicated manual operation is required to increase the number of ESC colonies. Here, the objective of this study was to design and demonstrate a new device to easily find colonies and carry them to microwells. RESULTS: We developed a polydimethylsiloxane-based device for easy manipulation and isolation of ESC colonies. By introducing ESC colonies into the groove placed near culturing microwells, users can easily find, pick up and carry ESC colonies to microwells. By hydrophilic treatment using bovine serum albumin, 2-µL droplets including colonies reached the microwell bottom. Operation time using this device was shortened for both beginners (2.3-fold) and experts (1.5-fold) compared to the conventional colony picking operation. Isolated ESC colonies were confirmed to have maintained pluripotency. This device is expected to promote research by shortening the isolation procedure for ESC colonies or other large cells (e.g. eggs or embryos) and shortening training time for beginners as a simple sorter.
Asunto(s)
Células Madre Embrionarias , Animales , Diferenciación Celular , RatonesRESUMEN
This study demonstrates the rapid fabrication and utility of 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer film for cell patterning. The film was obtained on a cell culture surface by microcasting MPC polymer ethanol solution into a degassed polydimethylsiloxane mold with a desired pattern. After removal of the mold, 293AD cells were cultured on the surface of the polymer film with the patterned microstructures. Patterned cell adhesion restricted by the film was successfully maintained during at least a 168-h cultivation. The microcast MPC polymer film can be prepared rapidly and used for efficient long-term cell confinement.
Asunto(s)
Adhesión Celular/efectos de los fármacos , Metacrilatos/química , Fosforilcolina/análogos & derivados , Polímeros/química , Dimetilpolisiloxanos/química , Dimetilpolisiloxanos/farmacología , Humanos , Metacrilatos/farmacología , Fosforilcolina/química , Fosforilcolina/farmacología , Polímeros/farmacología , Propiedades de Superficie , VacioRESUMEN
Techniques for partitioning cell adhesion are useful tools in biological and medical experiments. However, conventional cell patterning methods require special apparatus, special materials or high-level skills. Therefore, we have developed a new cell patterning methodology which can be easily carried out in biological laboratories. Non-cell adhesive material including hydrogel or gas patterns to restrict cell adhesion on a culture dish or glass substrates can be constructed by exploiting a polydimethylsiloxane (PDMS) mold with microchannels. The PDMS molds suck non-adhesive materials into microchannels from the inlet of the microchannels and the materials are immobilized onto the substrates with a desired pattern. High resolution under a few micrometers and long-term stability can be realized. This method has been used for analysis of stem cells, muscle cells, neuron development and other cells in collaboration with many biological researchers. Several examples to use this technique are introduced in this review.
Asunto(s)
Forma de la Célula , Dimetilpolisiloxanos/química , Técnicas Analíticas Microfluídicas , Animales , Adhesión Celular , HumanosRESUMEN
Development of bio-microactuators combining microdevices and cellular mechanical functions has been an active research field owing to their desirable properties including high mechanical integrity and biocompatibility. Although various types of devices were reported, the use of as-is natural muscle tissue should be more effective. An earthworm muscle-driven valve has been created. Long-time (more than 2 min) and repeatable displacement was observed by chemical (acetylcholine) stimulation. The generated force of the muscle (1 cm × 3 cm) was 1.57 mN on average for 2 min by the acetylcholine solution (100 mM) stimulation. We demonstrated an on-chip valve that stopped the constant pressure flow by the muscle contraction. For electrical control, short pulse stimulation was used for the continuous and repeatable muscle contraction. The response time was 3 s, and the pressure resistance was 3.0 kPa. Chemical stimulation was then used for continuous muscle contraction. The response time was 42 s, and the pressure resistance was 1.5 kPa. The ON (closed) state was kept for at least 2 min. An on-chip valve was demonstrated that stopped the constant pressure flow by the muscle contraction. This is the first demonstration of the muscle-based valve that is 100% chemically actuated and controlled.
Asunto(s)
Acetilcolina/química , Estimulación Eléctrica , Oligoquetos/fisiología , Animales , Electricidad , Fenómenos Mecánicos/efectos de la radiación , Contracción Muscular/efectos de los fármacos , Contracción Muscular/efectos de la radiación , Músculo Liso/química , Músculos/química , Oligoquetos/química , Tráquea/química , Tráquea/efectos de los fármacosRESUMEN
We report a fabrication method of a "post-molecule/cell patterned" glass microchip using pressure-based low/room temperature bonding in dry conditions combined with fluorosilane patterning. Multiple proteins/cells were patterned in a single channel using this method. This simple method will provide benefits for using microchips for high throughput analysis in many biological experiments.
RESUMEN
We demonstrated that our previously developed gas-phase fluoroalkylsilane patterning method was applicable to polydimethylsiloxane (PDMS) and we compared the stability of patterned proteins and cultured cells between PDMS and glass surfaces. The shapes of the protein patterns were stable on both glass and PDMS surfaces for more than 1 week. The cell patterns were stable on glass surfaces for 1 week, while those on PDMS collapsed within a few days. These results indicated that our method was applicable to PDMS, although, compared with glass, PDMS has an unsolved issue for its application to long-term patterning of cells.
Asunto(s)
Dimetilpolisiloxanos/química , Proteínas/análisis , Animales , Vidrio/química , Ratones , Propiedades de Superficie , Células Tumorales CultivadasRESUMEN
Direct electric power generation using biological functions have become a research focus due to their low cost and cleanliness. Unlike major approaches using glucose fuels or microbial fuel cells (MFCs), we present a generation method with intrinsically high energy conversion efficiency and generation with arbitrary timing using living electric organs of Torpedo (electric rays) which are serially integrated electrocytes converting ATP into electric energy. We developed alternative nervous systems using fluid pressure to stimulate electrocytes by a neurotransmitter, acetylcholine (Ach), and demonstrated electric generation. Maximum voltage and current were 1.5 V and 0.64 mA, respectively, with a duration time of a few seconds. We also demonstrated energy accumulation in a capacitor. The current was far larger than that using general cells other than electrocytes (~pA level). The generation ability was confirmed against repetitive cycles and also after preservation for 1 day. This is the first step toward ATP-based energy harvesting devices.
Asunto(s)
Órgano Eléctrico/fisiología , Torpedo/fisiología , Acetilcolina/metabolismo , Animales , Fuentes de Energía Bioeléctrica , Fenómenos Fisiológicos del Sistema NerviosoRESUMEN
A single-step, easy-to-use enzyme immunoassay capillary sensor, composed of functional multilayer coatings, was developed in this study. The coatings were composed of substrate-immobilized hydrophobic coating, hydrogel coating, and soluble coating containing an enzyme-labeled antibody. The response mechanism involved a spontaneous immunoreaction triggered by capillary action-mediated introduction of a sample antigen solution and subsequent separation of unreacted enzyme-labeled antibodies and antigen-enzyme-labeled antibody complexes by the molecular sieving effect of the hydrogel. An enzyme reaction at the substrate-immobilized hydrophobic coating/hydrogel coating interface resulted in a protein-selective fluorescence response. An antigen concentration-dependent response was obtained for diagnostic marker protein samples (hemoglobin A1c (HbA1c), 7.14-16.7 mg mL(-1); alpha-fetoprotein (AFP), 1.4-140 ng mL(-1); C-reactive protein (CRP), 0.5-10 µg mL(-1)) that cover a clinically important concentration range. The successful measurement of CRP in diluted serum samples demonstrated the application of this capillary sensor.
Asunto(s)
Biomarcadores/análisis , Proteína C-Reactiva/análisis , Electroforesis Capilar/métodos , Hemoglobina Glucada/análisis , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Técnicas para Inmunoenzimas/métodos , alfa-Fetoproteínas/análisis , Complejo Antígeno-Anticuerpo , HumanosRESUMEN
This review describes advancements toward the development of a capillary-assembled microchip (CAs-CHIP) for simultaneous multiple analyte sensing and microchip capillary electrophoresis. Development of such an advanced system relies on several factors such as improving the fluid handling technique, creating new biosensing mechanisms, and integrating different functional capillaries into a single CAs-CHIP system. Furthermore, we provide an overview of various functional capillaries that have been established for valving and biosensing applications such as ions, metabolites, proteins, and enzyme activities. We also highlight future prospects for CAs-CHIP development as related to high-throughput systems, facile fluid handling, and mass production.
Asunto(s)
Técnicas Biosensibles/instrumentación , Electroforesis por Microchip/instrumentaciónRESUMEN
A combination of an enzyme-labeled antibody release coating and a novel fluorescent enzyme substrate-copolymerized hydrogel in a microchannel for a single-step, no-wash microfluidic immunoassay is demonstrated. This hydrogel discriminates the free enzyme-conjugated antibody from an antigen-enzyme-conjugated antibody immunocomplex based on the difference in molecular size. A selective and sensitive immunoassay, with 10-1000 ng mL(-1) linear range, is reported.
Asunto(s)
Anticuerpos/inmunología , Enzimas/química , Colorantes Fluorescentes/química , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Inmunoensayo/métodos , Técnicas Analíticas Microfluídicas , Fosfatasa Alcalina/química , Fosfatasa Alcalina/metabolismo , Anticuerpos/química , Antígenos/química , Antígenos/inmunología , Antígenos/metabolismo , Cumarinas/química , Enzimas/metabolismo , Enzimas Inmovilizadas/química , Enzimas Inmovilizadas/metabolismo , Humanos , Inmunoensayo/instrumentación , Técnicas Analíticas Microfluídicas/instrumentación , Polimerizacion , Especificidad por SustratoRESUMEN
In this study, a highly sensitive capillary-based enzyme-linked immunosorbent assay (ELISA) has been developed for the analysis of picomolar levels of thrombin-cleaved osteopontin (trOPN), a potential biomarker for ischemic stroke, in human plasma. Using a square capillary coated with 8.5 µg/ml anti-human trOPN capture antibody for ELISA, the linear range obtained was 2 to 16 pM trOPN antigen. This concentration range was in the detection window of trOPN antigen in plasma samples. Compared with the conventional microplate-based ELISA, the current capillary technique significantly reduced the amounts of reagent from milliliter to microliter, reduced the analysis time from 8 to 3 h, and had a better sensitivity and detection limit performance from approximately 50 pM down to 2 pM of trOPN antigen. These results indicate that this capillary-based immunoassay is a potential tool for biomarker detection and may be useful in clinical trials and medical diagnostic applications.
Asunto(s)
Análisis Químico de la Sangre/métodos , Ensayo de Inmunoadsorción Enzimática/métodos , Osteopontina/sangre , Osteopontina/metabolismo , Proteolisis , Trombina/metabolismo , Anticuerpos Inmovilizados/inmunología , Biomarcadores/sangre , Biomarcadores/metabolismo , Humanos , Osteopontina/inmunologíaRESUMEN
This paper presents a novel rhodamine diphosphate molecule that allows highly sensitive detection of proteins by employing sequential enzyme-linked immunosorbent assay and capillary isoelectric focusing (ELISA-cIEF). Seven-fold improvement in the immunoassay sensitivity and a 1-2 order of magnitude lower detection limit has been demonstrated by taking advantage of the combination of the enzyme-based signal amplification of ELISA and the concentration of enzyme reaction products by cIEF.
Asunto(s)
Bioensayo/métodos , Tubo Capilar , Ensayo de Inmunoadsorción Enzimática/métodos , Colorantes Fluorescentes/química , Focalización Isoeléctrica/métodos , Acrilamidas/química , Acción Capilar , Límite de Detección , Proteínas/análisis , Proteínas/química , Proteínas/aislamiento & purificación , Rodaminas/químicaRESUMEN
To simplify the complicated operation steps and to minimize sample and reagent amounts for enzyme-linked immunosorbent assays (ELISA), we developed a square glass capillary immunosensor containing both covalently immobilized capture antibodies and physically adsorbed enzyme-linked antibodies. The immobilization of capture antibodies (anti-human IgG) was carried out by the treatment of 3-aminopropyltriethoxy silane, glutaraldehyde, and protein-A, followed by affinity capture of the antibody. In contrast, the enzyme-linked antibodies (alkaline phosphatase (ALP)-linked anti-human IgG) were physically adsorbed on the four corners of the capillary with the aid of polyethylene glycol (PEG) acting as a scaffold. A nanoliter volume of antigen (human IgG)-containing sample solution was introduced via capillary action. This addition resulted in the release and diffusion of ALP-linked anti-human IgG into the bulk solution. This event led to a 20-min single-step sandwich immunoreaction at the inner wall of capillary; the reaction was detected through the reaction with fluorescein diphosphate (FDP) which generated a fluorescent product, fluorescein. Using this technique, we obtained an intra-capillary precision with a coefficient of variation of 9.7%. In addition, the specificity study showed that the human IgG capillary immunosensor did not respond to rabbit IgG. Quantitative analysis was possible within the response range of 10 - 5000 ng mL(-1) anti-human IgG. This capillary immunosensor can act as a single analytical unit or can be integrated into a capillary array for multiple bioanalysis.
Asunto(s)
Fosfatasa Alcalina/química , Anticuerpos Antiidiotipos/inmunología , Complejo Antígeno-Anticuerpo/inmunología , Ensayo de Inmunoadsorción Enzimática/métodos , Fosfatasa Alcalina/metabolismo , Anticuerpos Antiidiotipos/química , Ensayo de Inmunoadsorción Enzimática/instrumentación , Vidrio/química , Humanos , Polietilenglicoles/químicaRESUMEN
Multiple enzyme linked immunosorbent assay (ELISA) chip is developed by using capillary-assembled microchip (CAs-CHIP) technique, which involves simple embedding of 2-3mm length of square capillaries possessing valving and immuno-reaction functions into the microchannels fabricated on a PDMS substrate. In contrast to the previously reported ELISA chips, our system enables not only the flexible design of the multi-ELISA chip required for many different diagnostic purposes, but also the valving operation required for a reliable analysis. Here, a thermo-responsive polymer-immobilized capillary was used together with a small Peltier device, as a valving part, and different antibody-immobilized capillaries were used as immuno-reaction part. Sample solution and detecting reagent solutions were sequentially introduced through the valving capillary, and the valve is closed to completely stop the solution flow inside the immuno-reaction capillaries and detected using thermal lens microscope (TLM). Different anti-IgGs (human, goat, chicken) were immobilized and used as ELISA parts of CAs-CHIP. Sequential introductions of the mixed IgG solution, mixed enzyme-antibody solution and substrate solution facilitated the multiple determinations of 0.1 ng mL(-1) IgGs (human, goat, chicken) with total analysis time of about 30 min. The valve-integrated multi-ELISA chip developed here can be applied for many different diagnostic purposes by using different immuno-reaction capillaries necessary for a specific clinical diagnostic application.
Asunto(s)
Ensayo de Inmunoadsorción Enzimática/métodos , Animales , Electroforesis por Microchip , Ensayo de Inmunoadsorción Enzimática/instrumentación , Humanos , Inmunoglobulina G/inmunología , MiniaturizaciónRESUMEN
A simple integration of both flow control valves and a reaction-based sensing function on a single microchip was performed by using capillary-assembled microchip (CAs-CHIP: Hisamoto, H.; Nakashima, Y.; Kitamura, C.; Funano, S.-i.; Yasuoka, M.; Morishima, K.; Kikutani, Y.; Kitamori, T.; Terabe, S. Anal. Chem. 2004, 76, 3222-3228.). In contrast to the previously reported on-chip valving systems, where the simple valving functions were integrated, our system can integrate not only valving function but also many other chemical functions to perform a complex chemical operation on a single microchip. Here, an enzymatic reaction-based readout system is employed as an example. A square capillary immobilizing N-isopropylacrylamide polymer monolith (referred to as "valving capillary") is used as a thermoresponsive "valving part" and the immobilizing enzyme-modified glycidyl methacrylate polymer monolith (referred to as "sensing capillary") is used as a "sensing part" of the CAs-CHIP. These capillaries are embedded into a lattice microchannel network fabricated on poly(dimethylsiloxane), which has the same channel dimensions as the outer dimensions of the square capillaries. After bonding, a small Peltier device (2 mm x 2 mm) for temperature control is placed on the embedded valving capillaries to control fluid flow. Using this for heating or cooling, fast operation times of 1.4 and 3.2 s for opening and closing valves, respectively, are successfully achieved. Finally, two valving capillaries are independently controlled to trap sample solution within a bypass channel, where the enzyme-immobilized capillary is embedded, and then enzymatic reaction-based sensing of chemical species is performed as an example. The fundamental characteristics of the valve-integrated microchip are fully investigated, and an application to the analysis of an enzyme substrate by using two independent valving capillaries and a sensing capillary is demonstrated.