Enzymatic hydrolysis of PTT polymers and oligomers.

Oligomers and polymers (film, fabrics) of the linear aromatic polyester poly(trimethylene terephthalate) (PTT) were treated with polyesterases from Thermomyces lanuginosus, Penicillium citrinum, Thermobifida fusca and Fusarium solani pisi. The cutinase from T. fusca was found to release the highest amounts of hydrolysis products from PTT materials and was able to open and hydrolyse a cyclic PTT dimer according to RP-HPLC-UV detection. In contrast, the lipase from T. lanuginosus also showed activity on the PTT fibres and on bis(3-hydroxypropyl) terephthalate (BHPT) but was not able to hydrolyse the polymer film, mono(3-hydroxypropyl) terephthalate (MHPT) nor the cyclic dimer of PTT. As control enzymes inhibited with mercury chloride were used. Surface hydrophilicity changes were investigated with contact angle measurements and the degree of crystallinity changes were determined with DSC.

Sonochemical substrate selectivity and reaction pathway of systematically substituted azo compounds.

The sonochemical degradation of the systematically substituted azo compound 2,7-dihydroxy-1-phenylazonaphthaline-3,6-disulfonic acid was investigated using a frequency of 850 kHz and an acoustic input power of 61 W. All derivatives were degraded completely within 6h by the ultrasonic treatment. Trifluoromethyl substituted azo compounds exhibited 2-3-fold higher degradation rates in comparison to the reference hydrogen substituted azo compound (k=0.54 h(-1)). In contrast to enzymatic processes (azoreductase or laccase), the ultrasonic treatment for these ortho-, meta-, and para-substituted azo compound showed 1.5-50-fold higher degradation rates. Additionally the ultrasound treatment was characterized by shorter reaction times. As a result of the detection and identification of specific intermediates using LC-MS a reaction pathway of the sonochemical degradation of the analysed azo compound is proposed indicating the formation of cyclohexadienone and naphthalene quinone derivatives.

Restricting detergent protease action to surface of protein fibres by chemical modification.

Due to their excellent properties, such as thermostability, activity over a broad range of pH and efficient stain removal, proteases from Bacillus sp. are commonly used in the textile industry including industrial processes and laundry and represent one of the most important groups of enzymes. However, due to the action of proteases, severe damage on natural protein fibres such as silk and wool result after washing with detergents containing proteases. To include the benefits of proteases in a wool fibre friendly detergent formulation, the soluble polymer polyethylene glycol (PEG) was covalently attached to a protease from Bacillus licheniformis. In contrast to activation of PEG with cyanuric chloride (50%) activation with 1,1'-carbonyldiimidazole (CDI) lead to activity recovery above 90%. With these modified enzymes, hydrolytic attack on wool fibres could be successfully prevented up to 95% compared to the native enzymes. Colour difference (DeltaE) measured in the three dimensional colour space showed good stain removal properties for the modified enzymes. Furthermore, half-life of the modified enzymes in buffers and commercial detergents solutions was nearly twice as high as those of the non-modified enzymes with values of up to 63 min. Out of the different modified proteases especially the B. licheniformis protease with the 2.0-kDa polymer attached both retained stain removal properties and did not hydrolyse/damage wool fibres.

Influence of redox mediators and metal ions on synthetic acid dye decolourization by crude laccase from Trametes hirsuta.

In this paper, the effect of redox mediators on synthetic acid dye decolourization (Sella Solid Red and Luganil Green) by laccase from Trametes hirsuta cultures has been investigated. All the redox mediators tested, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), 1-hydroxybenzotriazole (HBT) and Remazol Brilliant Blue R (RBBR), led to higher activities than those obtained without mediators addition showing the suitability of the laccase/mediator system (LMS) in the decolourization of acid dyes. HBT was by far the most effective mediator, showing a decolourization percentage of 88% in 10 min for Sella Solid Red and of 49% in 20 min for Luganil Green. On the other hand, the stability of laccase against several metal ions, normally found in textile wastewater, was assessed. Laccase was stable at a concentration of 1mM for 7d against all the metal ions tested except for Zn+2, CrO4(-2), Cd+2, Cr2O7(-2), Fe+2, Cu+2 and especially Hg+2. When the concentration was increased to 10mM laccase stability decreased against all the metals assayed, in particular against Fe+2. In addition, the effect of metal ions on the decolourization process was also studied. It was found that Hg+2 inhibited the dye decolourization process, being the presence of HBT absolutely required for dye decolourization.

Stainless steel sponge: a novel carrier for the immobilisation of the white-rot fungus Trametes hirsuta for decolourization of textile dyes.

Alginate beads, polyurethane foam, nylon sponge and stainless steel sponge were tested as carrier materials for the white-rot fungus Trametes hirsuta for laccase production under submerged fermentation conditions. Stainless steel sponge was the best carrier material leading to the highest laccase activities of up to 800 U/l after 8 days of cultivation. These values are higher than those reported to date operating with inert supports and without inducer addition. In a 1-l bioreactor containing T. hirsuta immobilised on stainless steel sponge laccase activities of about 2200 U/l were obtained when the culture medium was supplemented with 1 mM copper sulphate. There were no operational problems with this system during culturing time. The textile dye Indigo Carmine was almost totally degraded in 3 days by T. hirsuta grown in this bioreactor, while Lanaset Marine was degraded in two successive batches, reaching in the first batch a decolourization percentage of about 82% in 15 h and in the second one by 71% in 28 h. Results obtained after inhibition of growth of T. hirsuta by antibiotics indicated that dye decolourization could not exclusively be attributed to laccase activity.

An immobilised catalase peroxidase from the alkalothermophilic Bacillus SF for the treatment of textile-bleaching effluents.

A catalase peroxidase (CP) from the newly isolated Bacillus SF was used to treat textile-bleaching effluents. The enzyme was stable at high pH values and temperatures, but was more sensitive to deactivation by hydrogen peroxide than monofunctional catalases. Based on the Michaelis-Menten kinetics of the CP, a model was developed to describe its deactivation characteristics. The enzyme was immobilised on various alumina-based carrier materials with different shapes and the specific activity increased with the porosity of the carrier. The shape of the carrier had an important influence on the release of oxygen formed during the catalase reaction from the packed-bed reactor and Novalox saddles were found to be the most suitable shape. Bleaching effluent was treated in a horizontal packed-bed reactor containing 10 kg of the immobilised CP at a textile-finishing company. The treated liquid (500 l) was reused within the company for dyeing fabrics with various dyes, resulting in acceptable colour differences of below Delta E*=1.0 for all dyes.

Decolorization of textile dyes by laccases from a newly isolated strain of Trametes modesta.

Four ligninolytic fungi, Trametes modesta, Trametes hirsuta, Trametes versicolor and Sclerotium rolfsii, were compared for their ability to produce laccases. The fungal laccases were screened for their ability to decolorize eight synthetic dyes (anthraquinone, azo, indigo and triarylmethane). The decolorization rate depended both on the source of the enzyme preparation and on the structure of the dye. Based on laccase production and dye decolorizing ability, T. modesta was selected for further studies. All the tested dyes were decolorized by the T. modesta laccase most efficiently under acid conditions (pH 3-6) but the optimum pH for decolorization of the individual dye varied. The decolorization rate of this laccase increased with the rise in temperature to 50-60 degrees C. The decolorization efficiency of T. modesta laccase was improved remarkably in the presence of mediators like 1-hydroxybenzotriazole and 2-methoxyphenothiazine.

Characterization of a chitinase and an endo-beta-1,3-glucanase from Trichoderma harzianum Rifai T24 involved in control of the phytopathogen Sclerotium rolfsii.

Of 24 Trichoderma isolates, T harzianum Rifai (T24) showed a potential for control of the phytopathogenic basidiomycete Sclerotium rolfsii. When T24 was grown on different carbon sources, growth inhibition of S. rolfsii by the T24 culture filtrate correlated with the activity of extracellular chitinase and beta-1,3-glucanase. The 43-kilodalton (kDa) chitinase and the 74-kDa beta-1,3-glucanase were purified from the T24 culture filtrate in two and three steps, respectively, using ammonium sulphate precipitation followed by hydrophobic interaction chromatography (phenyl-Sepharose) and gel filtration (beta-1,3-glucanase). Km and Kcat were 3.8 g l(-1) and 0.71 s(-1) for the chitinase (chitin) and 1.1 g(-1) and 52 s(-1) for the beta-1,3-glucanase (laminarin). The chitinase showed higher activity on chitin than on less-acetylated substrate analogues (chitosan), while the beta-1,3-glucanase was specific for beta-1,3-linkages in polysaccharides. Both enzymes were stable at 30 degrees C, while at 60 degrees C the chitinase and the beta-1,3-glucanase were rapidly inactivated, showing half-lives of 15 and 20 min, respectively. The enzymes inhibited growth of S. rolfsii in an additive manner showing a promising ED50 (50% effective dose) value of 2.7 microg/ml.

Indigo degradation with purified laccases from Trametes hirsuta and Sclerotium rolfsii.

The degradation of the textile dye indigo with purified laccases from the fungi Trametes hirsuta (THL1 and THL2) and Sclerotium rolfsii (SRL1) was studied. All laccases were able to oxidize indigo yielding isatin (indole-2,3-dione), which was further decomposed to anthranilic acid (2-aminobenzoic acid). Based on the oxygen consumption rate of the laccases during indigo degradation, a potential mechanism for the oxidation of indigo involving the step-wise abstraction of four electrons from indigo by the enzyme was suggested. Comparing the effect of the known redox-mediators acetosyringone, 1-hydroxybenzotriazole (HOBT) and 4-hydroxybenzenesulfonic acid (PHBS) on laccase-catalyzed degradation of indigo, we found a maximum of about 30% increase in the oxidation rate of indigo with SRL1 and acetosyringone. The particle size of indigo agglomerates after laccase treatment was influenced by the origin of the laccase preparation and by the incubation time. Diameter distributions were found to have one maximum and compared to the indigo particle size distribution of the control, for all laccases, the indigo agglomerates seemed to have shifted to smaller diameters. Bleaching of fabrics by the laccases (based on K/S values) correlated with the release of indigo degradation products.

Thermo-alkali-stable catalases from newly isolated Bacillus sp. for the treatment and recycling of textile bleaching effluents.

Three thermoalkaliphilic bacteria, which were grown at pH 9.3-10 and 60-65 degrees C were isolated out of a textile wastewater drain. The unknown micro-organisms were identified as thermoalkaliphilic Bacillus sp. Growth conditions were studied and catalase activities and stabilities compared. Catalases from Bacillus SF showed high stabilities at 60 degrees C and pH 9 (t1/2=38 h) and thus this strain was chosen for further investigations, such as electron microscopy, immobilization of catalase and hydrogen peroxide degradation studies. Degradation of hydrogen peroxide with an immobilized catalase from Bacillus SF enabled the reuse of the water for the dyeing process. In contrast, application of the free enzyme for treatment of bleaching effluents, caused interaction between the denaturated protein and the dye, resulting in reduced dye uptake, and a higher color difference of 1.3DeltaE* of dyed fabrics compared to 0.9DeltaE* when using the immobilized enzyme.

Immobilization of catalases from Bacillus SF on alumina for the treatment of textile bleaching effluents.

A catalase preparation from a newly isolated Bacillus sp. was covalently immobilized on silanized alumina using glutaraldehyde as crosslinking agent. The effect of the coupling time of the enzyme-support reaction was determined in terms of protein recovery and immobilization yield and a certain balance point was found after which the activity recovery decreased. The activity profile of the immobilized catalase at high pH and temperature was investigated. The immobilized enzyme showed higher stabilities (214 h at pH 11, 30 degrees C) at alkaline pH than the free enzyme (10 h at pH 11, 30 degrees C). The immobilized catalase was inhibited by anionic stabilizers or surfactants added to the hydrogen peroxide substrate solution.

A catalase-peroxidase from a newly isolated thermoalkaliphilic Bacillus sp. with potential for the treatment of textile bleaching effluents.

A new thermoalkaliphilic bacterium was isolated from a textile wastewater drain and identified as a new Bacillus sp. (Bacillus SF). Because of its high pH stability and thermostability, a catalase-peroxidase (CP) from this strain has potential for the treatment of textile bleaching effluents. The CP from Bacillus SF was purified to more than 70.3-fold homogeneity using fractionated ammonium sulfate precipitation, hydrophobic interaction, and anion-exchange and gel-filtration chromatography. The native CP had a molecular mass of 165 kDa and was composed of two identical subunits. The isoelectric point of the protein was at pH 6.0. Peptide mass mapping using matrix-assisted laser desorption ionization-mass spectrometry showed a homology between the CP from Bacillus SF and the CP from Bacillus stearothermophilus. The apparent Km value of the catalase activity for H2O2 was 2.6 mM and the k(cat) value was 11,475 s(-1). The enzyme showed high catalase activity and an appreciable peroxidase activity with guaiacol and o-dianisidine. The enzyme was stable at high pH, with a half-life of 104 h at pH 10 and 25 degrees C and 14 h at 50 degrees C. The enzyme was inhibited by azide and cyanide, in a competitive manner, but not by the catalase-specific inhibitor 3-amino-1,2,4-triazole.

Decolorization and detoxification of textile dyes with a laccase from Trametes hirsuta.

Trametes hirsuta and a purified laccase from this organism were able to degrade triarylmethane, indigoid, azo, and anthraquinonic dyes. Initial decolorization velocities depended on the substituents on the phenolic rings of the dyes. Immobilization of the T. hirsuta laccase on alumina enhanced the thermal stabilities of the enzyme and its tolerance against some enzyme inhibitors, such as halides, copper chelators, and dyeing additives. The laccase lost 50% of its activity at 50 mM NaCl while the 50% inhibitory concentration (IC(50)) of the immobilized enzyme was 85 mM. Treatment of dyes with the immobilized laccase reduced their toxicities (based on the oxygen consumption rate of Pseudomonas putida) by up to 80% (anthraquinonic dyes). Textile effluents decolorized with T. hirsuta or the laccase were used for dyeing. Metabolites and/or enzyme protein strongly interacted with the dyeing process indicated by lower staining levels (K/S) values than obtained with a blank using water. However, when the effluents were decolorized with immobilized laccase, they could be used for dyeing and acceptable color differences (DeltaE*) below 1.1 were measured for most dyes.

Nitrile hydratase and amidase from Rhodococcus rhodochrous hydrolyze acrylic fibers and granular polyacrylonitriles.

Rhodococcus rhodochrous NCIMB 11216 produced nitrile hydratase (320 nkat mg of protein(-1)) and amidase activity (38.4 nkat mg of protein(-1)) when grown on a medium containing propionitrile. These enzymes were able to hydrolyze nitrile groups of both granular polyacrylonitriles (PAN) and acrylic fibers. Nitrile groups of PAN40 (molecular mass, 40 kDa) and PAN190 (molecular mass, 190 kDa) were converted into the corresponding carbonic acids to 1.8 and 1.0%, respectively. In contrast, surfacial nitrile groups of acrylic fibers were only converted to the corresponding amides. X-ray photoelectron spectroscopy analysis showed that 16% of the surfacial nitrile groups were hydrolyzed by the R. rhodochrous enzymes. Due to the enzymatic modification, the acrylic fibers became more hydrophilic and thus, adsorption of dyes was enhanced. This was indicated by a 15% increase in the staining level (K/S value) for C. I. Basic Blue 9.

Xylan binding subsite mapping in the xylanase from Penicillium simplicissimum using xylooligosaccharides as cryo-protectant.

Following a recent low-temperature crystal structure analysis of the native xylanase from Penicillium simplicissimum [Schmidt et al. (1998) Protein Sci. 7, 2081-2088], where an array of glycerol molecules, diffused into the crystal during soaking in a cryoprotectant, was observed within the active-site cleft, we utilized monomeric xylose as well as a variety of linear (Xn, n = 2 to 5) and branched xylooligomers at high concentrations (typically 20% w/v) as cryoprotectant for low-temperature crystallographic experiments. Binding of the glycosidic moiety (or its hydrolysis products) to the enzyme's active-site cleft was observed after as little as 30 s soaking of a native enzyme crystal. The use of a substrate or substrate analogue as cryoprotectant therefore suggests itself as a simple and widely applicable alternative to the use of crystallographic flow-cells for substrate-saturation experiments. Short-chain xylooligomers, i.e., xylobiose (X2) and xylotriose (X3), were found to bind to the active-site cleft with its reducing end hydrogen-bonded to the catalytic acid-base catalyst Glu132. Xylotetraose (X4) and -pentaose (X5) had apparently been cleaved during the soaking time into a xylotriose plus a monomeric (X4) or dimeric (X5) sugar. While the trimeric hydrolysis product was always found to bind in the same way as xylotriose, the monomer or dimer yielded only weak and diffuse electron density within the xylan-binding cleft, at the opposite side of the active center. This suggests that the two catalytic residues divide the binding cleft into a "substrate recognition area" (from the active site toward the nonreducing end of a bound xylan chain), with strong and specific xylan binding and a "product release area" with considerably weaker and less specific binding. The size of the substrate recognition area (3-4 subsites for sugar rings) explains enzyme kinetic data, according to which short oligomers (X2 and X3) bind to the enzyme without being hydrolyzed.

Esterase and lipase activity in Jatropha curcas L. seeds.

Two new esterases (JEA and JEB) and a lipase (JL) were extracted from the seeds of Jatropha curas L. Lipase activity was only found during germination of the seeds and increased to a maximum after 4 days of germination. All enzymes were found to be most active in the alkaline range at around pH 8 and the purified (fractionated precipitation with ethanol and gel filtration) esterases were very stable at high temperatures. The molecular weight (SDS-PAGE) of both esterases was determined to be 21.6-23.5 kDa (JEA) and 30.2 kDa (JEB) and the isoelectric point was 5.7-6.1 for esterase JEA and 9.0 for esterase JEB. Most ions caused a negative influence on the activity of both esterases. Using p-nitrophenyl butyrate as a substrate JEA showed a K(m) of 0.02 mM and a v(max) of 0.26 micromol mg(-1) min(-1). Under the same conditions JEB showed a K(m) of 0.07 mM and a v(max) of 0.24 micromol mg(-1) min(-1). Both esterases hydrolyzed tributyrin, nitrophenyl esters up to a chain length of =C4 and naphtylesters up to a chain length =C6. In transesterification reactions, JL was found to be most active at very low water activities (0.2) and in high water activities, the lipase hydrolysed triglycerides into conversions above 80%. The lipase hydrolysed both short chain and long chain triglycerides at about the same rate but was inactive on alpha-methylbenzyl acetate. JL is a potentially useful biocatalyst in the hydrolysis of triglycerides in organic solvents.

Enzyme-supported oil extraction from Jatropha curcas seeds.

Jatropha curcas is a tropical plant widely distributed in arid areas. The seeds contain about 55% of oil, which is mainly used for the production of soap as a fuel and after transesterification as biodiesel. Various methods for recovering of oil from the seeds, including extraction with organic solvents and water, have been investigated. Compared to hexane extraction (98%) the oil extraction using water only yielded 38% of the total oil content of the seeds. Using several cell wall degrading enzymes during aqueous extraction a maximum yield of 86% was obtained. The influence of cellulolytic, hemicellulolytic enzymes, as well as proteases was studied. The experiments were carried out at different pH-values and temperatures to find out the optimum for oil recovering using enzymes. , Surprisingly, the best results (86%) were obtained using an alkaline protease. Combinations of proteases with hemicellulases and/or cellulases did not further increase the extraction yield. The enzyme-supported aqueous extraction offers a nontoxic alternative to common extraction methods using organic solvents with reasonable yields.

Biogas production from Jatropha curcas press-cake.

Seeds of the tropical plant Jatropha curcas (purge nut, physic nut) are used for the production of oil. Several methods for oil extraction have been developed. In all processes, about 50% of the weight of the seeds remain as a press cake containing mainly protein and carbohydrates. Investigations have shown that this residue contains toxic compounds and cannot be used as animal feed without further processing. Preliminary experiments have shown that the residue is a good substrate for biogas production. Biogas formation was studied using a semicontinous upflow anaerobic sludge blanket (UASB) reactor; a contact-process and an anaerobic filter each reactor having a total volume of 110 L. A maximum production rate of 3.5 m3 m"3 d"1 was obtained in the anaerobic filter with a loading rate of 13 kg COD m~3 d"1. However, the UASB reactor and the contact-process were not suitable for using this substrate. When using an anaerobic filter with Jatropha curcas seed cake as a substrate, 76% of the COD was degraded and 1 kg degraded COD yielded 355 L of biogas containing 70% methane.