Structural and compositional diversity of biosurfactants produced by a novel strain of Sporosarcina luteola ME44 from oil reservoir.

The urealytically active microorganism Sporosarcina luteola induces the precipitation of metals, which has attracted attention in biomineralization, bioremediation, and industrial waste recycling. Herein, we report a novel biosurfactant-producing strain of S. luteola ME44 isolated from Chinese Oilfield. The structure, composition, and surface activity of the biosurfactants produced by S. luteola ME44 were investigated by using a combination of the high-performance liquid chromatography, time-of-flight mass spectrometry, and surface tensiometer. The biosurfactant extracted by strain ME44 was identified as surfactin with five variants and the yield was 1010 ± 60 mg⋅L-1 . This is the first report on the structural composition and surface activity of biosurfactants isolated from the S. luteola. It extended our knowledge about the role of the species S. luteola in the ecosystem of extreme natural environments such as oil reservoir. In addition, S. luteola ME44 showed bioprecipitation properties for metal ions Cd(II), Cu(II), Zn(II), and Ag(I), which indicated the application potential of S. luteola in the field of bioremediation.

A new biosurfactant-producing strain, Fictibacillus nanhaiensis ME46, isolated from an oil field in China.

The genus Fictibacillus contains twelve species significant in the synthesis of cellulose-degrading enzymes and phenylalanine dehydrogenase, isolated mainly from marine sedimentary environments. Here, we report a new biosurfactant-producing strain, Fictibacillus nanhaiensis ME46, isolated from Daqing oil field in China. The biosurfactant extracted from Strain ME46 was determined as surfactin, one of the representative families of lipopeptide biosurfactants. The yield of the surfactin produced by strain ME46 was 0.62 g·L-1 as determined by high-performance liquid chromatography, and the critical micelle concentration (CMC) of the surfactin was estimated to be about 68 mg·L-1 and the surface tension at CMC was 35.1 mN·m-1. This study extended our knowledge about the role of the species Fictibacillus nanhaiensis in the ecosystem of natural environments such as the oil field.

Quantitative determination of rhamnolipid using HPLC-UV through carboxyl labeling.

Rhamnolipid, as a low-toxic, biodegradable and environmentally friendly biosurfactant, has broad application prospects in many industries. However, the quantitative determination of rhamnolipid is still a challenging task. Here, a new sensitive method for the quantitative analysis of rhamnolipid based on a simple derivatization reaction was developed. In this study, 3-[3'-(l-rhamnopyranosyloxy) decanoyloxy] decanoic acid (Rha-C10-C10) and 3-[3'-(2'-O-α-l-rhamnopyranosyloxy) decanoyloxy] decanoic acid (Rha-Rha-C10-C10) were utilized as the representative rhamnolipids. Liquid chromatography-mass spectrometry and high-performance liquid chromatography-ultra violet results showed that these two compounds were successfully labeled with 1 N1-(4-nitrophenyl)-1,2-ethylenediamine. There was an excellent linear relationship between rhamnolipid concentration and peak area of labeled rhamnolipid. The detection limits of the Rha-C10-C10 and Rha-Rha-C10-C10 were 0.018 mg/L (36 nmol/L) and 0.014 mg/L (22 nmol/L), respectively. The established amidation method was suitable for the accurate analysis of rhamnolipids in the biotechnological process. The method had good reproducibility with the relative standard deviation of 0.96% and 0.79%, respectively, and sufficient accuracy with a recovery of 96%-100%. This method was applied to quantitative analysis of 10 rhamnolipid homologs metabolized by Pseudomonas aeruginosa LJ-8. The single labeling method was used for the quantitative analysis of multiple components, which provided an effective method for the quality evaluation of other glycolipids with carboxyl groups.

Structural Diversity of the Lipopeptide Biosurfactant Produced by a Newly Isolated Strain, Geobacillus thermodenitrifcans ME63.

The genus Geobacillus is active in degradation of hydrocarbons in thermophilic and facultative environments since it was first reported in 1920. Here, we report a new strain, Geobacillus thermodenitrificans ME63, isolated from an oilfield with the ability of producing the biosurfactant. The composition, chemical structure, and surface activity of the biosurfactant produced by G. thermodenitrificans ME63 were investigated by using a combination of the high-performance liquid chromatography, time-of-flight ion mass spectrometry, and surface tensiometer. The biosurfactant produced by strain ME63 was identified as surfactin with six variants, which is one of the representative family of lipopeptide biosurfactants. The amino acid residue sequence in the peptide of this surfactin is N-Glu → Leu → Leu → Val → Leu → Asp → Leu-C. The critical micelle concentration (CMC) of the surfactin is 55 mg L-1, and the surface tension at CMC is 35.9 mN m-1, which is promising in bioremediation and oil recovery industries. The surface activity and emulsification properties of biosurfactants produced by G. thermodenitrificans ME63 showed excellent resistance to temperature changes, salinity changes, and pH changes.

Adsorption Kinetics of Biosurfactant Surfactin at the n-Hexadecane/Aqueous Solution Interface.

Surfactin is a typical kind of biosurfactant with a large diversity of structure, and its molecular structure is expected to play a crucial role in its adsorption dynamics. Adsorption kinetics of surfactin homologues at the n-hexadecane/aqueous solution interface is studied using a droplet-based microfluidic method. Molecular dynamics simulations are performed to illustrate the dependence of adsorption energy on the surfactin structure. Rapid reduction of dynamic interfacial tensions is obtained. The best fit to experimental results reveals that surfactin with shorter aliphatic chains, C13-surfactin and C14-surfactin, has larger rate constants of adsorption and desorption. Interfacial tensions are rapidly reduced in the case of the oil/water interface which is freshly formed, and the equilibrium adsorption is rapidly established approximately in 100-350 ms at concentrations above the critical micelle concentration. C15-surfactin that has a longer aliphatic chain adsorbs and desorbs slower, and the equilibration time of adsorption is slightly longer. Moreover, C15-surfactin has a strong tendency for adsorbing at the interface, which is in accordance with the larger adsorption energy obtained by molecular dynamics simulation, and aggregating behavior in solution. The present study provides insights on the surfactin structure and the dynamics of adsorption at the liquid/liquid interface.

Highly Ca2+-Ion-Tolerant Biobased Zwitterionic Surfactant with High Interfacial Activity.

The wide application of surfactants has a harmful effect on the environment, drawing more attention to the development and application of low-toxicity surfactants. A salt-tolerant and low-toxicity biobased zwitterionic surfactant, N,N-dimethyl-N-[2-hydroxy-3-sulfo-propyl]-N-benzyloxyoctadecanoyl-1,3-propanediamine (SPBOPA), was prepared from the oleic acid extracted from waste oils and anise ether extracted from the tarragon. The final surfactant structure was confirmed using gas chromatography-mass spectrometry (GC-MS), liquid chromatography-mass spectrometry (LC-MS), and 1H nuclear magnetic resonance (NMR) spectroscopy. The SPBOPA surfactant could reduce the interfacial tension between crude oil and formation brine to ultralow (5.2 × 10-4 mN/m) at a low dosage without extra alkali. It still had good interfacial properties in NaCl up to 60 g/L, Ca2+ up to 2000 mg/L, and temperature up to 100 °C. Furthermore, SPBOPA had strong antidilution and antiadsorption properties with low toxicity as demonstrated by the high LD50 value of >5000 mg/kg·BW. It could also enhance the wetting ability of crude oil surfaces. Meanwhile, it showed a high biodegradability in the environment. All of the results achieved in this work confirmed that the SPBOPA surfactant is a more robust and promising biobased surfactant candidate than traditional surfactants as an eco-friendly surfactant for enhanced oil recovery (EOR).

Microbial Lipopeptide-Producing Strains and Their Metabolic Roles under Anaerobic Conditions.

The lipopeptide produced by microorganisms is one of the representative biosurfactants and is characterized as a series of structural analogues of different families. Thirty-four families covering about 300 lipopeptide compounds have been reported in the last decades, and most of the reported lipopeptides produced by microorganisms were under aerobic conditions. The lipopeptide-producing strains under anaerobic conditions have attracted much attention from both the academic and industrial communities, due to the needs and the challenge of their applications in anaerobic environments, such as in oil reservoirs and in microbial enhanced oil recovery (MEOR). In this review, the fifty-eight reported bacterial strains, mostly isolated from oil reservoirs and dominated by the species Bacillus subtilis, producing lipopeptide biosurfactants, and the species Pseudomonas aeruginosa, producing glycolipid biosurfactants under anaerobic conditions were summarized. The metabolic pathway and the non-ribosomal peptide synthetases (NRPSs) of the strain Bacillus subtilis under anaerobic conditions were analyzed, which is expected to better understand the key mechanisms of the growth and production of lipopeptide biosurfactants of such kind of bacteria under anaerobic conditions, and to expand the industrial application of anaerobic biosurfactant-producing bacteria.

One-Step Generation of Multisomes from Lipid-Stabilized Double Emulsions.

Multisomes are multicompartmental structures formed by a lipid-stabilized network of aqueous droplets, which are contained by an outer oil phase. These biomimetic structures are emerging as a versatile platform for soft matter and synthetic biology applications. While several methods for producing multisomes have been described, including microfluidic techniques, approaches for generating biocompatible, monodisperse multisomes in a reproducible manner remain challenging to implement due to low throughput and complex device fabrication. Here, we report on a robust method for the dynamically controlled generation of multisomes with controllable sizes and high monodispersity from lipid-based double emulsions. The described microfluidic approach entails the use of three different phases forming a water/oil/water (W/O/W) double emulsion stabilized by lipid layers. We employ a gradient of glycerol concentration between the inner core and outer phase to drive the directed osmosis, allowing the swelling of lamellar lipid layers resulting in the formation of small aqueous daughter droplets at the interface of the inner aqueous core. By adding increasing concentrations of glycerol to the outer aqueous phase and subsequently varying the osmotic gradient, we show that key structural parameters, including the size of the internal droplets, can be specifically controlled. Finally, we show that this approach can be used to generate multisomes encapsulating small-molecule cargo, with potential applications in synthetic biology, drug delivery, and as carriers for active materials in the food and cosmetics industries.

The optimization of heterogeneous catalytic conditions in the direct alkylation of waste vegetable oil.

Alkylated waste vegetable oil is a versatile intermediate product in the synthesis of bio-based materials. Heterogeneous catalytic condition with high conversion rate in the direct alkylation of waste vegetable oil was reported and the deactivation mechanism of catalyst was revealed. The total exchange capacity, elemental composition and pyrolysis product of catalyst before and after the alkylation reaction were analysed by back titration, elemental analysis, electrospray ionization mass spectrometry, gas chromatography mass spectrometry and pyrolysis-gas chromatography/mass spectrometry, respectively. The results indicated that the metallic and non-metallic (C, H) elements contents of the catalyst have very much increased with great changes in pyrolysis product and a slight decrease in the total exchange capacity. The formation of insoluble polymers through Diels-Alder cycloaddition between triglycerides was proved to be the major factor causing the dysfunction of the catalytic centre. The metal ions from corrosion of the reactor were the minor factor causing about 2.56% loss of the catalytic centre. Moreover, the catalyst was able to maintain high catalytic efficiency when replacing the raw materials with other waste vegetable oil having low concentration of polyunsaturated fatty acids, which is significant for producing not only the aryl fatty acids derivatives but also the bio-based surfactants.

A Coarse-Grained Model for Microbial Lipopeptide Surfactin and Its Application in Self-Assembly.

Biosurfactants exhibit outstanding interfacial properties and unique biological activities that fairly related to their self-assembly in solutions and at interfaces. Computational simulations provide structural details of biosurfactant aggregates at the molecular level relevant to thermodynamic properties, but the understanding of kinetics of self-assembly remains limited due to lower simulation efficiency. In this work, a coarse-grained model has been developed for microbial lipopeptide surfactin, and surfactin monolayer at the octane/water interface and micelle in aqueous solution were studied using molecular dynamics simulations. Interaction parameters were optimized and validated by comparing with results obtained from experiments and atomistic molecular dynamics simulations. In particular, self-assembly of surfactin in aqueous solution was studied using the optimized parameters. Results showed that coarse-grained simulations well reproduced structural properties of surfactin monolayer and micelle and the molecular behavior such as surfactin orientation and conformation. Self-assembly features of surfactin in different stages have been captured, and the aggregation numbers of dominant clusters were in accordance with experimental data. This report suggested that the present coarse-grained model and interaction parameters allowed surfactin simulations over longer timescales and larger systems, which provide insights into characterizing both the kinetics of surfactin self-assembly and the adsorption of surfactin onto varying interfaces.

Lipid-Stabilized Double Emulsions Generated in Planar Microfluidic Devices.

Microemulsions have found a wide range of applications exploiting their chemical and physical properties. Development of microfluidic-based approaches has allowed for the controlled production of highly monodispersed emulsions, including the formation of multiple and hierarchical emulsions. Conventional poly(dimethylsiloxane)-based microfluidic systems require tight spatial control over the surface chemistry when used for double emulsion generation, which can be challenging to achieve on the micrometer scale. Here, we present a two-dimensional device design, which can selectively be surface-treated in a straightforward manner and allows for the formation of uniform water/oil/water double emulsions by combining two distinct hydrophilic and hydrophobic surface properties. These surfaces are sufficiently separated in space to allow for imparting their functionalization without the requirement for lithographic approaches or complex flow control. We demonstrate that a mismatch between the wettability requirements of the continuous phase and the channel wall inherent in this approach can be tolerated over several hundreds of micrometers, opening up the possibility to use simple pressure-driven flows to achieve surface functionalization. The design architecture exhibits robust efficiency in emulsion generation while retaining simple device fabrication. We finally demonstrate the potential of this approach by generating water in oil in water emulsions with lipid molecules acting as surfactants.

Characterization of biosurfactant lipopeptide and its performance evaluation for oil-spill remediation.

Biosurfactant lipopeptide is a promising dispersant over varieties of chemical ones in oil-spill remediation. The toxicity, biodegradability and performance of the biosurfactant lipopeptide are studied in this paper.

Insight into the Selectivity and Mechanism of Surfactin Containing Multiple Dissociated Carboxyls with 1-Bromoacetylpyrene in Fluorescent Derivatization.

Fluorescent derivatization of the carboxyls in surfactin peptide rings is an effective way to improve the sensitivity of trace detection of surfactin, but very little is known about the reaction selectivity of surfactin containing multiple carboxyls in derivatization. In this paper, the reaction selectivity in fluorescent derivatization of a surfactin containing two carboxyls in its peptide ring with 1-bromoacetylpyrene and the catalysis role in the reactions were investigated using electrospray ionization mass spectrometry and tandem mass spectrometry. It showed that only one carboxyl was labeled with 1-bromoacetylpyrene in derivatization reactions, and the connection of the Asp residue with 1-bromoacetylpyrene was confirmed. It also showed that triethylamine as a catalyst was connected with surfactin to liberate more nucleophilic groups beneficial to promote the derivatization rate. This would contribute to better understanding the mechanism of derivatization of surfactin and its analogues with 1-bromoacetylpyrene, and with other fluorescent labeling reagents.

Microfluidic Diffusion Platform for Characterizing the Sizes of Lipid Vesicles and the Thermodynamics of Protein-Lipid Interactions.

Elucidation of the fundamental interactions of proteins with biological membranes under native conditions is crucial for understanding the molecular basis of their biological function and malfunction. Notably, the large surface to volume ratio of living cells provides a molecular landscape for significant interactions of cellular components with membranes, thereby potentially modulating their function. However, such interactions can be challenging to probe using conventional biophysical methods due to the heterogeneity of the species and processes involved. Here, we use direct measurements of micron scale molecular diffusivity to detect and quantify the interactions of α-synuclein, associated with the etiology of Parkinson's disease, with negatively charged lipid vesicles. We further demonstrate that this microfluidic approach enables the characterization of size distributions of different binary mixtures of vesicles, which are not readily accessible using conventional light scattering techniques. Finally, the size distributions of the two α-synuclein conformations, free α-synuclein and membrane-bound α-synuclein, were resolved under varying lipid:protein ratios, thus, allowing the determination of the dissociation constant and the binding stoichiometry associated with this protein-lipid system. The microfluidic diffusional sizing platform allows these measurements to be performed on a time scale of minutes using microlitre volumes, thus, establishing the basis for an approach for the study of molecular interactions of heterogeneous systems under native conditions.

Mechanism of biosurfactant adsorption to oil/water interfaces from millisecond scale tensiometry measurements.

Many biological molecules are by their nature amphiphilic and have the ability to act as surfactants, stabilizing interfaces between aqueous and immiscible oil phases. In this paper, we explore the adsorption kinetics of surfactin, a naturally occurring cyclic lipopeptide, at hexadecane/water interfaces and compare and contrast its adsorption behaviour with that of synthetic alkyl benzene sulfonate isomers, through direct measurements of changes in interfacial tension upon surfactant adsorption. We access millisecond time resolution in kinetic measurements by making use of droplet microfluidics to probe the interfacial tension of hexadecane droplets dispersed in a continuous water phase through monitoring their deformation when the droplets are exposed to shear flows in a microfluidic channel with regular corrugations. Our results reveal that surfactin rapidly adsorbs to the interface, thus the interfacial tension equilibrates within 300 ms, while the synthetic surfactants used undergo adsorption processes at an approximately one order of magnitude longer timescale. The approach presented may provide opportunities for understanding and modulating the adsorption mechanism of amphiphiles on a variety of interfaces in the context of life sciences and industrial applications.

Structural Analysis of the Lipopeptide Produced by the Bacillus subtilis Mutant R2-104 with Mutagenesis.

The lipopeptide and its homologues are a kind of the five major biosurfactants with prominent interfacial and biological activities. A suite of mutagenesis method was adopted to expose a wild lipopeptide-producing strain Bacillus subtilis HSO121 to improve lipopeptide yield, and a stable mutant named R2-104 with a 2.0-fold production of lipopeptide was obtained. Compared to that of the wild strain HSO121, the lipopeptide produced by R2-104 showed a similar surface activity, but the course profiles of lipopeptide production during cultivation were different, with the peak yield of 500 mg at about 9 h by R2-104, and 400 mg at about 5 h by HSO121. The constituent abundance of the lipopeptide homologues produced by R2-104 was also different from that by HSO121. Combined methods of ESI-MS, GC-MS and MS-MS were applied for structural characterization of lipopeptide homologues, and it showed that the lipopeptides produced by R2-104 and HSO121 were attributed to a surfactin family with different constituents. The dominant constituent of the surfactin family produced by R2-104 was anteiso C15-surfactin with a relative content of 43.8 %, while the dominant one produced by HSO121was iso C14-surfactin with a relative content of 33.1 %.

Force generation by the growth of amyloid aggregates.

The generation of mechanical forces are central to a wide range of vital biological processes, including the function of the cytoskeleton. Although the forces emerging from the polymerization of native proteins have been studied in detail, the potential for force generation by aberrant protein polymerization has not yet been explored. Here, we show that the growth of amyloid fibrils, archetypical aberrant protein polymers, is capable of unleashing mechanical forces on the piconewton scale for individual filaments. We apply microfluidic techniques to measure the forces released by amyloid growth for two systems: insulin and lysozyme. The level of force measured for amyloid growth in both systems is comparable to that observed for actin and tubulin, systems that have evolved to generate force during their native functions and, unlike amyloid growth, rely on the input of external energy in the form of nucleotide hydrolysis for maximum force generation. Furthermore, we find that the power density released from growing amyloid fibrils is comparable to that of high-performance synthetic polymer actuators. These findings highlight the potential of amyloid structures as active materials and shed light on the criteria for regulation and reversibility that guide molecular evolution of functional polymers.

Binding structure and kinetics of surfactin monolayer formed at the air/water interface to counterions: A molecular dynamics simulation study.

The binding structure and kinetics of ionized surfactin monolayer formed at the air/water interface to five counterions, Li+, Na+, K+, Ca2+, and Ba2+ (molar ratios of surfactin to monovalent and divalent counterions are 1:2 and 1:1 respectively), have been studied using molecular dynamics simulation. The results show that surfactin exhibits higher binding affinity to divalent counterions, Ca2+, and Ba2+, and smaller monovalent counterion, Li+, than Na+ and K+. Both carboxyl groups in surfactin are accessible for counterions, but the carboxyl group in Glu1 is easier to access by counterions than Asp5. Salt bridges are widely built between carboxyl groups by counterions, and the probability of the formation of intermolecular salt bridge is markedly larger than that of intramolecular salt bridge. Divalent counterions perform well in forming salt bridges between carboxyl groups. The salt bridges mediated by Ca2+ are so rigid that the lifetimes are about 0.13 ns, and the break rates of these salt bridges are 1-2 orders of magnitude smaller than those mediated by K+ which is about 5 ps in duration. The positions of the hydration layer of carboxyl groups are independent of counterions, but the bound counterions induce the dehydration of carboxyl groups and disturb the hydrogen bonds built between carboxyl group and hydration water.

The Rebirth of Waste Cooking Oil to Novel Bio-based Surfactants.

Waste cooking oil (WCO) is a kind of non-edible oil with enormous quantities and its unreasonable dispose may generate negative impact on human life and environment. However, WCO is certainly a renewable feedstock of bio-based materials. To get the rebirth of WCO, we have established a facile and high-yield method to convert WCO to bio-based zwitterionic surfactants with excellent surface and interfacial properties. The interfacial tension between crude oil and water could reach ultra-low value as 0.0016 mN m(-1) at a low dosage as 0.100 g L(-1) of this bio-based surfactant without the aid of extra alkali, which shows a strong interfacial activity and the great potential application in many industrial fields, in particular, the application in enhanced oil recovery in oilfields in place of petroleum-based surfactants.

Structural diversity of the microbial surfactin derivatives from selective esterification approach.

Surfactin originated from genus Bacillus is composed of a heptapeptide moiety bonded to the carboxyl and hydroxyl groups of a ß-hydroxy fatty acid and it can be chemically modified to prepare the derivatives with different structures, owing to the existence of two free carboxyl groups in its peptide loop. This article presents the chemical modification of surfactin esterified with three different alcohols, and nine novel surfactin derivatives have been separated from products by the high performance liquid chromatography (HPLC). The novel derivatives, identified with Fourier transform infrared spectroscopy (FT-IR) and electrospray ionization mass spectrometry (ESI-MS), are the mono-hexyl-surfactin C14 ester, mono-hexyl-surfactin C15 ester, mono-2-methoxy-ethyl-surfactin C14 ester, di-hexyl-surfactin C14 ester, di-hexyl-surfactin ester C15, di-2-methoxy-ethyl-surfactin ester C14, di-2-methoxy-ethyl-surfactin ester C15, di-6-hydoxyl-hexyl-surfactin C14 ester and, di-6-hydoxyl-hexyl-surfactin C15 ester. The reaction conditions for esterification were optimized and the dependence of yields on different alcohols and catalysts were discussed. This study shows that esterification is one of the most efficient ways of chemical modification for surfactin and it can be used to prepare more derivatives to meet the needs of study in biological and interfacial activities.