Sustainable thermal regulation improves stability and efficiency in all-perovskite tandem solar cells.

Mixed Sn-Pb perovskites have emerged as promising photovoltaic materials for both single- and multi-junction solar cells. However, achieving their scale-up and practical application requires further enhancement in stability. We identify that their poor thermal conductivity results in insufficient thermal transfer, leading to heat accumulation within the absorber layer that accelerates thermal degradation. A thermal regulation strategy by incorporating carboranes into perovskites is developed; these are electron-delocalized carbon-boron molecules known for their efficient heat transfer capability. We specifically select ortho-carborane due to its low thermal hysteresis. We observe its existence through the perovskite layer showing a decreasing trend from the buried interface to the top surface, effectively transferring heat and lowering the surface temperature by around 5 °C under illumination. o-CB also facilitates hole extraction at the perovskite/PEDOT:PSS interface and reduces charge recombination. These enable mixed Sn-Pb cells to exhibit improved thermal stability, retaining 80% of their initial efficiencies after aging at 85 °C for 1080 hours. When integrated into monolithic all-perovskite tandems, we achieve efficiencies of over 27%. A tandem cell maintains 87% of its initial PCE after 704 h of continuous operation under illumination.

Boron modification promoting electrochemical surface reconstruction of NiFe-LDH for efficient and stable freshwater/seawater oxidation catalysis.

Transition metal-based electrocatalysts generally take place surface reconstruction in alkaline conditions, but little is known about how to improve the reconstruction to a highly active oxyhydroxide surface for an efficient and stable oxygen evolution reaction (OER). Herein, we develop a strategy to accelerate surface reconstruction by combining boron modification and cyclic voltammetry (CV) activation. Density functional theory calculations and in-situ/ex-situ characterizations indicate that both B-doping and electrochemical activation can reduce the energy barrier and contribute to the surface evolution into highly active oxyhydroxides. The formed oxyhydroxide active phase can tune the electronic configuration and boost the OER process. The reconstructed catalyst of CV-B-NiFe-LDH displays excellent alkaline OER performance in freshwater, simulated seawater, and natural seawater with low overpotentials at 100 mA cm-2 (η100: 219, 236, and 255 mV, respectively) and good durability. This catalyst also presents outstanding Cl- corrosion resistance in alkalized seawater electrolytes. The CV-B-NiFe-LDH||Pt/C electrolyzer reveals prominent performance for alkalized freshwater/seawater splitting. This study provides a guideline for developing advanced OER electrocatalysts by promoting surface reconstruction.

Deswelling Mechanisms of PNIPAM Grafted in Nanochannels: A Molecular Dynamics Simulation Study.

Porous thermosensitive hydrogels exhibit a more flexible strategy for freshwater capture compared to conventional hydrogels. This study employs molecular dynamics (MD) simulation to investigate the deswelling behavior of poly(N-isopropylacrylamide) (PNIPAM) grafted within the nanochannel, aiming to elucidate the deswelling elimination process at various temperatures. Notably, a distinct phase separation is observed at specific temperatures above the lower solution temperature (LCST). Furthermore, this study takes the effect of heat flux into account, wherein distinct heat fluxes lead to varying levels of phase separation between water and the polymer. Specifically, the number of hydrogen bonds, volume of polymer chains, and density distribution of water molecules are statistically analyzed to reveal the mechanism of phase separation in a thermosensitive hydrogel. These findings provide insight into the accelerated deswelling kinetics of the PNIPAM polymer chain, which has guiding significance for the field of water harvesting by the enhancement of the water release capacity in thermosensitive hydrogels.

A dynamic multi-objective evolutionary algorithm using center and multi-direction prediction strategies.

Dynamic multi-objective optimization problems have been popular because of its extensive application. The difficulty of solving the problem focuses on the moving PS as well as PF dynamically. A large number of efficient strategies have been put forward to deal with such problems by speeding up convergence and keeping diversity. Prediction strategy is a common method which is widely used in dynamic optimization environment. However, how to increase the efficiency of prediction is always a key but difficult issue. In this paper, a new prediction model is designed by using the rank sums of individuals, and the position difference of individuals in the previous two adjacent environments is defined to identify the present change type. The proposed prediction strategy depends on environment change types. In order to show the effectiveness of the proposed algorithm, the comparison is carried out with five state-of-the-art approaches on 20 benchmark instances of dynamic multi-objective problems. The experimental results indicate the proposed algorithm can get good convergence and distribution in dynamic environments.

Enhanced Hydroxyl Adsorption in Ultrathin NiO/Cr2 O3 In-Plane Heterostructures for Efficient Alkaline Methanol Oxidation Reaction.

The exploration of advanced nickel-based electrocatalysts for alkaline methanol oxidation reaction (MOR) holds immense promise for value-added organic products coupled with hydrogen production, but still remain challenging. Herein, we construct ultrathin NiO/Cr2 O3 in-plane heterostructures to promote the alkaline MOR process. Experimental and theoretical studies reveal that NiO/Cr2 O3 in-plane heterostructures enable a favorable upshift of the d-band center and enhanced adsorption of hydroxyl species, leading to accelerated generation of active NiO(OH)ads species. Furthermore, ultrathin in-plane heterostructures endow the catalyst with good charge transfer ability and adsorption behavior of methanol molecules onto catalytic sites, contributing to the improvement of alkaline MOR kinetics. As a result, ultrathin NiO/Cr2 O3 in-plane heterostructures exhibit a remarkable MOR activity with a high current density of 221 mA cm-2 at 0.6 V vs Ag/AgCl, which is 7.1-fold larger than that of pure NiO nanosheets and comparable with other highly active catalysts reported so far. This work provides an effectual strategy to optimize the activity of nickel-based catalysts and highlights the dominate efficacy of ultrathin in-plane heterostructures in alkaline MOR.

Genome-Wide Identification and Comprehensive Analysis of the FtsH Gene Family in Soybean (Glycine max).

The filamentation temperature-sensitive H (FtsH) gene family is critical in regulating plant chloroplast development and photosynthesis. It plays a vital role in plant growth, development, and stress response. Although FtsH genes have been identified in a wide range of plants, there is no detailed study of the FtsH gene family in soybean (Glycine max). Here, we identified 34 GmFtsH genes, which could be categorized into eight groups, and GmFtsH genes in the same group had similar structures and conserved protein motifs. We also performed intraspecific and interspecific collinearity analysis and found that the GmFtsH family has large-scale gene duplication and is more closely related to Arabidopsis thaliana. Cis-acting elements analysis in the promoter region of the GmFtsH genes revealed that most genes contain developmental and stress response elements. Expression patterns based on transcriptome data and real-time reverse transcription quantitative PCR (qRT-PCR) showed that most of the GmFtsH genes were expressed at the highest levels in leaves. Then, GO enrichment analysis indicated that GmFtsH genes might function as a protein hydrolase. In addition, the GmFtsH13 protein was confirmed to be localized in chloroplasts by a transient expression experiment in tobacco. Taken together, the results of this study lay the foundation for the functional determination of GmFtsH genes and help researchers further understand the regulatory network in soybean leaf development.

Freeze-Dried Camelina Lipid Droplets Loaded with Human Basic Fibroblast Growth Factor-2 Formulation for Transdermal Delivery: Breaking through the Cuticle Barrier to Accelerate Deep Second-Degree Burn Healing.

Transdermal administration of chemo therapeutics into burn healing may be an effective treatment to reduce toxic side effects and improve patient compliance for burns. As a transdermal delivery system, Camelina lipid droplets (CLDs) have received great attention due to their biocompatibility, high drug payload, and rapid absorption. However, the absorbed-related mechanisms of Camelina lipid droplets have not yet been reported. Thus, this paper not only demonstrated that CLD can accelerate skin burn healing through promoting hFGF2 absorption, but also elucidated the mechanism between the skin tissue and keratinocytes using Franz, HE staining, DSC, FTIR spectroscopy, and atomic force microscopy with the presence of CLD-hFGF2 freeze-dried powder. We found that the cumulative release rate of CLD-hFGF2 freeze-dried powder was significantly higher than that of free hFGF2 freeze-dried powder into the skin. At the same time, CLD can change the structure and content of lipids and keratin to increase the permeability of hFGF2 freeze-dried powder in skin tissue. Unlike the free state of hFGF2, the biophysical properties of single cells, including height and adhesion force, were changed under CLD-hFGF2 freeze-dried powder treatment. Meanwhile, CLD-hFGF2 freeze-dried powder was more easily taken up through keratinocytes without damaging cell integrity, which provided a new viewpoint for understanding the absorption mechanism with the CLD system for cellular physiology characteristics. Overall, our findings demonstrated that CLD could break through the stratum corneum (SC) barrier and elucidated the transport mechanism of lipid droplets in skin tissue, which provides a crucial guideline in drug delivery applications for future engineering.

Comparative Proteomic Analysis of Two Wild Soybean (Glycine soja) Genotypes Reveals Positive Regulation of Saline-Alkaline Stress Tolerance by Tonoplast Transporters.

Soil saline-alkalization is a significant constraint for soybean production. Owing to higher genetic diversity of wild soybean, we compared the proteomic landscape of saline-alkaline stress-tolerant (SWBY032) and stress-sensitive (SWLJ092) wild soybean (Glycine soja) strains under saline and saline-alkaline stress. Out of 346 differentially expressed proteins (DEPs) specifically involved in saline-alkaline stress, 159 and 133 DEPs were identified in only SWLJ092 and SWBY032, respectively. Functional annotations revealed that more ribosome proteins were downregulated in SWLJ092, whereas more membrane transporters were upregulated in SWBY032. Moreover, protein-protein interaction analysis of 133 DEPs revealed that 14 protein-synthesis- and 2 TCA-cycle-related DEPs might alter saline-alkaline tolerance by affecting protein synthesis and amino acid metabolism. Furthermore, we confirmed G. soja tonoplast intrinsic protein (GsTIP2-1 and GsTIP2-2), inositol transporter (GsINT1), sucrose transport protein (GsSUC4), and autoinhibited Ca2+-ATPase (GsACA11) as tonoplast transporters can synergistically improve saline-alkaline tolerance in soybean, possibly by relieving the inhibition of protein synthesis and amino acid metabolism. Overall, our findings provided a foundation for molecular breeding of a saline-alkaline stress-tolerant soybean.

Carbon Dots from Camelina Decorating hFGF2-Linked Camelina Lipid Droplets Cooperate to Accelerate Wound Healing.

Constant oxidative stress at the wound site prolongs the inflammation period and slows down the proliferation stage. In order to shorten the inflammatory period meanwhile promote the proliferative activity of fibroblasts, herein, we synthesized novel camelina-derived carbon dots (CDs) decorating on hFGF2-linked camelina lipid droplets (CLD-hFGF2) to form nanobiomaterial CDs-CLD-hFGF2. The CDs-CLD-hFGF2 possesses peroxidase activity and has effective reactive oxygen species radical scavenging activity while achieving proliferation of NIH/3T3 cells under oxidative stress in vitro. In the acute wound model, wound healing after CDs-CLD-hFGF2 treatment reached nearly 92% on the 10th day, compared with 82% for CLD-hFGF2. Moreover, the wound site showed significant anti-inflammatory effects characterized by the downregulation of pro-inflammatory factors and the upregulation of anti-inflammatory factor levels. Overall, this study provided a strategy for the comprehensive utilization of camelina oil crops and revealed a promising future that could be considered an effective method for wound healing on the skin.

Thermally Crosslinked F-rich Polymer to Inhibit Lead Leakage for Sustainable Perovskite Solar Cells and Modules.

High-performance perovskite solar cells have demonstrated commercial viability, but still face the risk of contamination from lead leakage and long-term stability problems caused by defects. Here, an organic small molecule (octafluoro-1,6-hexanediol diacrylate) is introduced into the perovskite film to form a polymer through in situ thermal crosslinking, of which the carbonyl group anchors the uncoordinated Pb2+ of perovskite and reduces the leakage of lead, along with the -CF2 - hydrophobic group protecting the Pb2+ from water invasion. Additionally, the polymer passivates varieties of Pb-related and I-related defects through coordination and hydrogen bonding interactions, regulating the crystallization of perovskite film with reduced trap density, releasing lattice strain, and promoting carrier transport and extraction. The optimal efficiencies of polymer-incorporated devices are 24.76 % (0.09 cm2 ) and 20.66 % (14 cm2 ). More importantly, the storage stability, thermal stability, and operational stability have been significantly improved.

Pd-Enriched-Core/Pt-Enriched-Shell High-Entropy Alloy with Face-Centred Cubic Structure for C1 and C2 Alcohol Oxidation.

High-entropy alloy nanoparticles (HEA NPs) have aroused great interest globally with their unique electrochemical, catalytic, and mechanical properties, as well as diverse activity and multielement tunability for multi-step reactions. Herein, a facile low-temperature synthesis method at atmospheric pressure is employed to synthesize Pd-enriched-HEA-core and Pt-enriched-HEA-shell NPs with a single phase of face-centred cubic structure. Interestingly, the lattice of both Pd-enriched-HEA-core and Pt-enriched-HEA-shell enlarge during the formation process of HEA, with tensile strains included in the core and shell of HEA. The as-obtained PdAgSn/PtBi HEA NPs show excellent electrocatalytic activity and durability for methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR). The specific (mass) activity of PdAgSn/PtBi HEA NPs for MOR is 4.7 mA cm-2 (2874 mA mg(Pd+Pt) -1 ), about 1.7 (5.9) and 1.5 (4.8) times higher than that of commercial Pd/C and Pt/C catalysts, respectively. Additional to high-entropy effect, Pt sites and Pd sites on the interface of the HEA act synergistically to facilitate the multi-step process towards EOR. This study offers a promising way to find a feasible route for scalable HEA manufacturing with promising applications.

Unfolding molecular switches for salt stress resilience in soybean: recent advances and prospects for salt-tolerant smart plant production.

The increasing sodium salts (NaCl, NaHCO3, NaSO4 etc.) in agricultural soil is a serious global concern for sustainable agricultural production and food security. Soybean is an important food crop, and their cultivation is severely challenged by high salt concentration in soils. Classical transgenic and innovative breeding technologies are immediately needed to engineer salt tolerant soybean plants. Additionally, unfolding the molecular switches and the key components of the soybean salt tolerance network are crucial for soybean salt tolerance improvement. Here we review our understandings of the core salt stress response mechanism in soybean. Recent findings described that salt stress sensing, signalling, ionic homeostasis (Na+/K+) and osmotic stress adjustment might be important in regulating the soybean salinity stress response. We also evaluated the importance of antiporters and transporters such as Arabidopsis K+ Transporter 1 (AKT1) potassium channel and the impact of epigenetic modification on soybean salt tolerance. We also review key phytohormones, and osmo-protectants and their role in salt tolerance in soybean. In addition, we discuss the progress of omics technologies for identifying salt stress responsive molecular switches and their targeted engineering for salt tolerance in soybean. This review summarizes recent progress in soybean salt stress functional genomics and way forward for molecular breeding for developing salt-tolerant soybean plant.

Poloxam Thermosensitive Hydrogels Loaded with hFGF2-Linked Camelina Lipid Droplets Accelerate Skin Regeneration in Deep Second-Degree Burns.

Burn injuries are difficult to manage due to the defect of large skin tissues, leading to major disability or even death. Human fibroblast growth factor 2 (hFGF2) is known to promote burn wound healing. However, direct administration of hFGF2 to the wound area would affect the bioactivity. To provide a supportive environment for hFGF2 and control its release in a steady fashion, in this research, we developed novel thermosensitive poloxam hydrogels delivered with hFGF2-linked Camelina lipid droplets (CLD-hFGF2 hydrogels). Cryopreserved scanning electron microscopy (SEM) results indicated that the incorporation of CLD-hFGF2 does not significantly affect the inner structure of hydrogels. The rheological properties showed that CLD-hFGF2 hydrogels gelated in response to temperature, thus optimizing the delivery method. In vitro, CLD-hFGF2 could be released from hydrogels for 3 days after drug delivery (the release rate was 72%), and the release solution could still promote the proliferation and migration of NIH3T3 cells. In vivo, compared with hydrogels alone or with direct CLD-hFGF2 administration, CLD-hFGF2 hydrogels had the most obvious effect on deep second-degree burn wound healing. This work indicates that CLD-hFGF2 hydrogels have potential application value in burn wound healing.

Soybean F-Box-Like Protein GmFBL144 Interacts With Small Heat Shock Protein and Negatively Regulates Plant Drought Stress Tolerance.

The F-box gene family is one of the largest gene families in plants. These genes regulate plant growth and development, as well as biotic and abiotic stress responses, and they have been extensively researched. Drought stress is one of the major factors limiting the yield and quality of soybean. In this study, bioinformatics analysis of the soybean F-box gene family was performed, and the role of soybean F-box-like gene GmFBL144 in drought stress adaptation was characterized. We identified 507 F-box genes in the soybean genome database, which were classified into 11 subfamilies. The expression profiles showed that GmFBL144 was highly expressed in plant roots. Overexpression of GmFBL144 increased the sensitivity of transgenic Arabidopsis to drought stress. Under drought stress, the hydrogen peroxide (H2O2) and malonaldehyde (MDA) contents of transgenic Arabidopsis were higher than those of the wild type (WT) and empty vector control, and the chlorophyll content was lower than that of the control. Y2H and bimolecular fluorescence complementation (BiFC) assays showed that GmFBL144 can interact with GmsHSP. Furthermore, our results showed that GmFBL144 can form SCF FBL144 (E3 ubiquitin ligase) with GmSkp1 and GmCullin1. Altogether, these results indicate that the soybean F-box-like protein GmFBL144 may negatively regulate plant drought stress tolerance by interacting with sHSP. These findings provide a basis for molecular genetics and breeding of soybean.

Tonoplast inositol transporters: Roles in plant abiotic stress response and crosstalk with other signals.

Inositol transporters (INT) are thought to be the pivotal transporters for vital metabolites, in particular lipids, minerals, and sugars. These transporters play an important role in transitional metabolism and various signaling pathways in plants through regulating the transduction of messages from hormones, neurotransmitters, and immunologic and growth factors. Extensive studies have been conducted on animal INT, with promising outcomes. However, only few recent studies have highlighted the importance and complexity of INT genes in the regulation of plant physiology stages, including growth and tolerance to stress conditions. The present review summarizes the most recent findings concerning the role of INT or inositol genes in plant metabolism and the response mechanisms triggered by external stressors. Moreover, we highlight the emerging role of vacuoles and vacuolar INT in plant molecular transition and their related roles in plant growth and development. INTs are the essential mediators of inositol uptake and its intracellular broadcasting for various metabolic pathways where they play crucial roles. Additionally, we report evidence on Na+/inositol transporters, which until now have only been characterized in animals, as well as H+/inositol symporters and their kinetic functions and physiological role and suggest their roles and operating mode in plants. A more comprehensive understanding of the INT functioning system, in particular the coordinated movement of inositol and the relation between inositol generation and other important plant signaling pathways, would greatly advance the study of plant stress adaptation.

Safflower oil body nanoparticles deliver hFGF10 to hair follicles and reduce microinflammation to accelerate hair regeneration in androgenetic alopecia.

Androgenetic alopecia (AGA) affects physical and mental health with limited therapeutic options. Novel materials and delivery methods have considerable potential to improve the current paradigm of treatment. In this study, we used a novel plant nanoparticle of safflower oil body (SOB) loaded with human fibroblast growth factor 10 (hFGF10) to target hair follicles and accelerate hair regeneration in AGA mice with few adverse effects. Our data revealed that the average particle size of SOB-hFGF10 was 226.73 ± 9.98 nm, with a spherical and uniform structure, and that SOB-hFGF10 was quicker to preferentially penetrate into hair follicles than hFGF2 alone. Using a mouse model of AGA, SOB-hFGF10 was found to significantly improve hair regeneration without any significant toxicity. Furthermore, SOB-hFGF10 inhibited dihydrotestosterone (DHT)-induced TNF-α, IL-1ß, and IL-6 overproduction in macrophages in relation to hair follicle microinflammation, thereby enhancing the proliferation of dermal papilla cells. Overall, this study provides an applicable therapeutic method through targeting hair follicles and reducing microinflammation to accelerate hair regeneration in AGA.

Comparative analysis of physiological variations and genetic architecture for cold stress response in soybean germplasm.

Soybean (Glycine max L.) is susceptible to low temperatures. Increasing lines of evidence indicate that abiotic stress-responsive genes are involved in plant low-temperature stress response. However, the involvement of photosynthesis, antioxidants and metabolites genes in low temperature response is largely unexplored in Soybean. In the current study, a genetic panel of diverse soybean varieties was analyzed for photosynthesis, chlorophyll fluorescence and leaf injury parameters under cold stress and control conditions. This helps us to identify cold tolerant (V100) and cold sensitive (V45) varieties. The V100 variety outperformed for antioxidant enzymes activities and relative expression of photosynthesis (Glyma.08G204800.1, Glyma.12G232000.1), GmSOD (GmSOD01, GmSOD08), GmPOD (GmPOD29, GmPOD47), trehalose (GmTPS01, GmTPS13) and cold marker genes (DREB1E, DREB1D, SCOF1) than V45 under cold stress. Upon cold stress, the V100 variety showed reduced accumulation of H2O2 and MDA levels and subsequently showed lower leaf injury compared to V45. Together, our results uncovered new avenues for identifying cold tolerant soybean varieties from a large panel. Additionally, we identified the role of antioxidants, osmo-protectants and their posttranscriptional regulators miRNAs such as miR319, miR394, miR397, and miR398 in Soybean cold stress tolerance.

Genome-wide identification of soybean Shaker K+ channel gene family and functional characterization of GmAKT1 in transgenic Arabidopsis thaliana under salt and drought stress.

Potassium is a major cationic nutrient involved in numerous physiological processes in plants. The uptake of K+ is mediated by K+ channels and transporters, and the Shaker K+ channel gene family plays an essential role in K+ uptake and stress resistance in plants. However, little is known regarding this family in soybean. In this study, 14 members of the Shaker K+ channel gene family were identified in soybean and were classified into five groups. Protein domain analysis revealed that Shaker K+ channel gene members have an ion transport domain (ion trans), a cyclic nucleotide-binding domain, ankyrin repeat domains, and a dimerization domain in the potassium ion channel. Quantitative real-time polymerase chain reaction analysis indicated that the expression of eight genes (notably GmAKT1) in soybean leaves and roots was significantly increased in response to salt and drought stress. Furthermore, the overexpression of GmAKT1 in Arabidopsis enhanced root length, K+ concentration, and fresh/dry weight ratio compared with wild-type plants subjected to salt and drought stress; this suggests that GmAKT1 improves the tolerance of soybean to abiotic stress. Our results provide important insight into the characterization of Shaker K+ channel gene family members in soybean and highlight the function of GmAKT1 in soybean plants under salt and drought stress.

Droplet Nucleation and Growth in the Presence of Noncondensable Gas: A Molecular Dynamics Study.

The presence of noncondensable gas (NCG) followed by undesirable heat transfer deterioration cannot be avoided in some situations. In this work, droplet nucleation and growth for the Ar-Ne mixed system are investigated using molecular dynamics simulation. Different droplet state transition modes corresponding to the subcooling degree or NCG content are obtained. The interaction between NCG and a droplet caused by gas enrichment near the solid surface is considered to explain the droplet wetting state during the condensation process. Finally, the disappearance mechanism of the flooding mode on the nanostructured surface under a large amount of NCG is clarified from the nanoscale, which could encourage a clear understanding of the NCG effect on dropwise condensation heat transfer on nanostructured superhydrophobic surfaces.

Thermal Conductivity of Ordered Porous Structures Coupling Gas and Solid Phases: A Molecular Dynamics Study.

Heat transfer in a porous solid-gas mixture system is an important process for many industrial applications. Optimization design of heat insulation material is very important in many fields such as pipe insulation, thermal protection of spacecraft, and building insulation. Understanding the micro-mechanism of the solid-gas coupling effect is necessary for the design of insulation material. The prediction of thermal conductivity is difficult for some kinds of porous materials due to the coupling impact of solid and gas. In this study, the Grand Canonical Monte Carlo method (GCMC) and molecular dynamics simulation (MD) are used to investigate the thermal conductivity for the ordered porous structures of intersecting square rods. The effect of gas concentration (pressure) and solid-gas interaction on thermal conductivity is revealed. The simulation results show that for different framework structures the pressure effect on thermal conductivity presents an inconsistent mode which is different from previous studies. Under the same pressure, the thermal conductivity is barely changed for different interactions between gas and solid phases. This study provides the feasibility for the direct calculation of thermal conductivity for porous structures coupling gas and solid phases using molecular dynamics simulation. The heat transfer in porous structures containing gas could be understood on a fundamental level.