RESUMEN
Conventional material processing approaches often achieve strengthening of materials at the cost of reduced ductility. Here, we show that high-pressure and high-temperature (HPHT) treatment can help overcome the strength-ductility trade-off in structural materials. We report an initially strong-yet-brittle eutectic high entropy alloy simultaneously doubling its strength to 1150 MPa and its tensile ductility to 36% after the HPHT treatment. Such strength-ductility synergy is attributed to the HPHT-induced formation of a hierarchically patterned microstructure with coherent interfaces, which promotes multiple deformation mechanisms, including dislocations, stacking faults, microbands and deformation twins, at multiple length scales. More importantly, the HPHT-induced microstructure helps relieve stress concentration at the interfaces, thereby arresting interfacial cracking commonly observed in traditional eutectic high entropy alloys. These findings suggest a new direction of research in employing HPHT techniques to help develop next generation structural materials.
RESUMEN
While conventional mechanics of materials offers a passive understanding of the mechanical properties of materials in existing forms, a paradigm shift, referred to as mechanomaterials, is emerging to enable the proactive programming of materials' properties and functionalities by leveraging force-geometry-property relationships. One of the foundations of this new paradigm is nanomechanics, which permits functional and structural materials to be designed based on principles from the nanoscale and beyond. Although the field of mechanomaterials is still in its infancy at the present time, we discuss the current progress in three specific directions closely linked to nanomechanics and provide perspectives on these research foci by considering the potential research directions, chances for success, and existing research capabilities. We believe this new research paradigm will provide future materials solutions for infrastructure, healthcare, energy, and environment.
RESUMEN
Biological systems can create materials with intricate structures and specialized functions. In comparison, precise control of structures in human-made materials has been challenging. Here we report on insect cuticle peptides that spontaneously form nanocapsules through a single-step solvent exchange process, where the concentration gradient resulting from the mixing of water and acetone drives the localization and self-assembly of the peptides into hollow nanocapsules. The underlying driving force is found to be the intrinsic affinity of the peptides for a particular solvent concentration, while the diffusion of water and acetone creates a gradient interface that triggers peptide localization and self-assembly. This gradient-mediated self-assembly offers a transformative pathway towards simple generation of drug delivery systems based on peptide nanocapsules.
RESUMEN
Van der Waals semiconductors exemplified by two-dimensional transition-metal dichalcogenides have promised next-generation atomically thin optoelectronics. Boosting their interaction with light is vital for practical applications, especially in the quantum regime where ultrastrong coupling is highly demanded but not yet realized. Here we report ultrastrong exciton-plasmon coupling at room temperature in tungsten disulfide (WS2) layers loaded with a random multi-singular plasmonic metasurface deposited on a flexible polymer substrate. Different from seeking perfect metals or high-quality resonators, we create a unique type of metasurface with a dense array of singularities that can support nanometre-sized plasmonic hotspots to which several WS2 excitons coherently interact. The associated normalized coupling strength is 0.12 for monolayer WS2 and can be up to 0.164 for quadrilayers, showcasing the ultrastrong exciton-plasmon coupling that is important for practical optoelectronic devices based on low-dimensional semiconductors.
RESUMEN
Grain boundaries (GBs) serve not only as strong barriers to dislocation motion, but also as important carriers to accommodate plastic deformation in crystalline solids. During deformation, the inherent excess volume associated with loose atomic packing in GBs brings about a microscopic degree of freedom that can initiate GB plasticity, which is beyond the classic geometric description of GBs. However, identification of this atomistic process has long remained elusive due to its transient nature. Here, we use Au polycrystals to unveil a general and inherent route to initiating GB plasticity via a transient topological transition process triggered by the excess volume. This route underscores the general impact of a microscopic degree of freedom which is governed by a stress-triaxiality-based criterion. Our findings provide a missing perspective for developing a more comprehensive understanding of the role of GBs in plastic deformation.
RESUMEN
Theoretical predictions of the ideal strength of materials range from E/30 to E/10 (E is Young's modulus). However, despite intense interest over the last decade, the value of the ideal strength achievable through experiments for metals remains a mystery. This study showcases the remarkable spall strength of Cu50Zr50 amorphous alloy that exceeds the E/10 limit at strain rates greater than 107 s-1 through laser-induced shock experiments. The material exhibits a spall strength of 11.5 GPa, approximately E/6 or 1/13 of its P-wave modulus, which sets a record for the elastic limit of metals. Electron microscopy and large-scale molecular dynamics simulations reveal that the primary failure mechanism at extreme strain rates is void nucleation and growth, rather than shear-banding. The rate dependence of material strength is explained by a void kinetic model controlled by surface energy. These findings help advance our understanding on the mechanical behavior of amorphous alloys under extreme strain rates.
RESUMEN
Liquid-phase exfoliation (LPE) in aqueous solutions provides a simple, scalable, and green approach to produce 2D materials. By combining atomistic simulations with exfoliation experiments, the interaction between a surfactant and a 2D layer at the molecular scale can be better understood. In this work, two different dyes, corresponding to rhodamine B base (Rbb) and to a phenylboronic acid BODIPY (PBA-BODIPY) derivative, are employed as dispersants to exfoliate graphene and hexagonal boron nitride (hBN) through sonication-assisted LPE. The exfoliated 2D sheets, mostly as few-layers, exhibit good quality and high loading of dyes. Using molecular dynamics (MD) simulations, the binding free energies are calculated and the arrangement of both dyes on the layers are predicted. It has been found that the dyes show a higher affinity toward hBN than graphene, which is consistent with the higher yields of exfoliated hBN. Furthermore, it is demonstrated that the adsorption behavior of Rbb molecules on graphene and hBN is quite different compared to PBA-BODIPY.
RESUMEN
Recent breakthroughs in fibre technology have enabled the assembly of functional materials with intimate interfaces into a single fibre with specific geometries1-11, delivering diverse functionalities over a large area, for example, serving as sensors, actuators, energy harvesting and storage, display, and healthcare apparatus12-17. As semiconductors are the critical component that governs device performance, the selection, control and engineering of semiconductors inside fibres are the key pathways to enabling high-performance functional fibres. However, owing to stress development and capillary instability in the high-yield fibre thermal drawing, both cracks and deformations in the semiconductor cores considerably affect the performance of these fibres. Here we report a mechanical design to achieve ultralong, fracture-free and perturbation-free semiconductor fibres, guided by a study on stress development and capillary instability at three stages of the fibre formation: the viscous flow, the core crystallization and the subsequent cooling stage. Then, the exposed semiconductor wires can be integrated into a single flexible fibre with well-defined interfaces with metal electrodes, thereby achieving optoelectronic fibres and large-scale optoelectronic fabrics. This work provides fundamental insights into extreme mechanics and fluid dynamics with geometries that are inaccessible in traditional platforms, essentially addressing the increasing demand for flexible and wearable optoelectronics.
RESUMEN
Infections caused by Staphylococcus aureus, notably methicillin-resistant S. aureus (MRSA), pose treatment challenges due to its ability to tolerate antibiotics and develop antibiotic resistance. The former, a mechanism independent of genetic changes, allows bacteria to withstand antibiotics by altering metabolic processes. Here, a potent methylazanediyl bisacetamide derivative, MB6, is described, which selectively targets MRSA membranes over mammalian membranes without observable resistance development. Although MB6 is effective against growing MRSA cells, its antimicrobial activity against MRSA persisters is limited. Nevertheless, MB6 significantly potentiates the bactericidal activity of gentamicin against MRSA persisters by facilitating gentamicin uptake. In addition, MB6 in combination with daptomycin exhibits enhanced anti-persister activity through mutual reinforcement of their membrane-disrupting activities. Crucially, the "triple" combination of MB6, gentamicin, and daptomycin exhibits a marked enhancement in the killing of MRSA persisters compared to individual components or any double combinations. These findings underscore the potential of MB6 to function as a potent and selective membrane-active antimicrobial adjuvant to enhance the efficacy of existing antibiotics against persister cells. The molecular mechanisms of MB6 elucidated in this study provide valuable insights for designing anti-persister adjuvants and for developing new antimicrobial combination strategies to overcome the current limitations of antibiotic treatments.
Asunto(s)
Daptomicina , Staphylococcus aureus Resistente a Meticilina , Infecciones Estafilocócicas , Animales , Daptomicina/farmacología , Staphylococcus aureus , Gentamicinas/farmacología , Pruebas de Sensibilidad Microbiana , Antibacterianos/farmacología , Infecciones Estafilocócicas/tratamiento farmacológico , MamíferosRESUMEN
Connecting different electronic devices is usually straightforward because they have paired, standardized interfaces, in which the shapes and sizes match each other perfectly. Tissue-electronics interfaces, however, cannot be standardized, because tissues are soft1-3 and have arbitrary shapes and sizes4-6. Shape-adaptive wrapping and covering around irregularly sized and shaped objects have been achieved using heat-shrink films because they can contract largely and rapidly when heated7. However, these materials are unsuitable for biological applications because they are usually much harder than tissues and contract at temperatures higher than 90 °C (refs. 8,9). Therefore, it is challenging to prepare stimuli-responsive films with large and rapid contractions for which the stimuli and mechanical properties are compatible with vulnerable tissues and electronic integration processes. Here, inspired by spider silk10-12, we designed water-responsive supercontractile polymer films composed of poly(ethylene oxide) and poly(ethylene glycol)-α-cyclodextrin inclusion complex, which are initially dry, flexible and stable under ambient conditions, contract by more than 50% of their original length within seconds (about 30% per second) after wetting and become soft (about 100 kPa) and stretchable (around 600%) hydrogel thin films thereafter. This supercontraction is attributed to the aligned microporous hierarchical structures of the films, which also facilitate electronic integration. We used this film to fabricate shape-adaptive electrode arrays that simplify the implantation procedure through supercontraction and conformally wrap around nerves, muscles and hearts of different sizes when wetted for in vivo nerve stimulation and electrophysiological signal recording. This study demonstrates that this water-responsive material can play an important part in shaping the next-generation tissue-electronics interfaces as well as broadening the biomedical application of shape-adaptive materials.
Asunto(s)
Electrofisiología , Polímeros , Agua , Animales , alfa-Ciclodextrinas/química , Electrodos , Electrofisiología/instrumentación , Electrofisiología/métodos , Electrofisiología/tendencias , Corazón , Músculos , Polietilenglicoles/química , Polímeros/química , Seda/química , Arañas , Agua/química , Hidrogeles/química , Electrónica/instrumentación , Electrónica/métodos , Electrónica/tendenciasRESUMEN
Nanoscale small-volume metallic materials typically exhibit high strengths but often suffer from a lack of tensile ductility due to undesirable premature failure. Here, we report unusual room-temperature uniform elongation up to ~110% at a high flow stress of 0.6-1.0 GPa in single-crystalline <110>-oriented CoCrFeNi high-entropy alloy nanopillars with well-defined geometries. By combining high-resolution microscopy and large-scale atomistic simulations, we reveal that this ultrahigh uniform tensile ductility is attributed to spatial and synergistic coordination of deformation twinning and dislocation slip, which effectively promote deformation delocalization and delay necking failure. These joint and/or sequential activations of the underlying displacive deformation mechanisms originate from chemical compositional heterogeneities at the atomic level and resulting wide variations in generalized stacking fault energy and associated dislocation activities. Our work provides mechanistic insights into superplastic deformations of multiple-principal element alloys at the nanoscale and opens routes for designing nanodevices with high mechanical reliability.
RESUMEN
In metallurgy, mechanical deformation is essential to engineer the microstructure of metals and to tailor their mechanical properties. However, this practice is inapplicable to near-net-shape metal parts produced by additive manufacturing (AM), since it would irremediably compromise their carefully designed geometries. In this work, we show how to circumvent this limitation by controlling the dislocation density and thermal stability of a steel alloy produced by laser powder bed fusion (LPBF) technology. We show that by manipulating the alloy's solidification structure, we can 'program' recrystallization upon heat treatment without using mechanical deformation. When employed site-specifically, our strategy enables designing and creating complex microstructure architectures that combine recrystallized and non-recrystallized regions with different microstructural features and properties. We show how this heterogeneity may be conducive to materials with superior performance compared to those with monolithic microstructure. Our work inspires the design of high-performance metal parts with artificially engineered microstructures by AM.
RESUMEN
Plastic deformation in cells and tissues has been found to play crucial roles in collective cell migration, cancer metastasis, and morphogenesis. However, the fundamental question of how plasticity is initiated in individual cells and then propagates within the tissue remains elusive. Here, we develop a mechanism-based theory of cellular and tissue plasticity that accounts for all key processes involved, including the activation and development of active contraction at different scales as well as the formation of endocytic vesicles on cell junctions and show that this theory achieves quantitative agreement with all existing experiments. Specifically, it reveals that, in response to optical or mechanical stimuli, the myosin contraction and thermal fluctuation-assisted formation and pinching of endocytic vesicles could lead to permanent shortening of cell junctions and that such plastic constriction can stretch neighboring cells and trigger their active contraction through mechanochemical feedbacks and eventually their plastic deformations as well. Our theory predicts that endocytic vesicles with a size around 1 to 2 µm will most likely be formed and a higher irreversible shortening of cell junctions could be achieved if a long stimulation is split into multiple short ones, all in quantitative agreement with experiments. Our analysis also shows that constriction of cells in tissue can undergo elastic/unratcheted to plastic/ratcheted transition as the magnitude and duration of active contraction increases, ultimately resulting in the propagation of plastic deformation waves within the monolayer with a constant speed which again is consistent with experimental observations.
Asunto(s)
Uniones Intercelulares , Morfogénesis/fisiología , Movimiento Celular/fisiologíaRESUMEN
Cold drawing, a well-established processing technique in the polymer industry, was recently revisited and discovered as an efficient material structuring method to create ordered patterns in composites consisting of both cold-drawable polymers and brittle target materials. Such a high-yield and low-cost manufacturing technique enables the large-scale fabrication of micro-ribbon structures for a wide range of functional materials, including two-dimensional (2D) layered materials. Compared to the abundant phenomenological results from experiments, however, the underlying mechanisms of this technique are not fully explored. Here, supported by experimental investigation, finite element calculations, and theoretical modeling, we systematically study the effect of a capping layer on the controlled fragmentation of 2D materials deposited on polymer substrates during the cold drawing. The capping layer is found to prevent the premature fracture of the 2D thin films during elastic deformation of the substrate, when a specific requirement proposed by the theoretical model is satisfied. Controlled fragmentation is enabled in the necking stage due to the protective effect of the capping layer, which also influences the size of the resulting fragments. Flexible and stretchable electrodes based on 2D material ribbons are fabricated to demonstrate the effectiveness of the proposed roadmap. This study gives an accurate understanding of interactions between 2D materials, polymer substrates, and capping layers during cold drawing, and offers guidance for potential applications such as flexible electronics.
RESUMEN
The mechanical properties of soft tissues can often be strongly correlated with the progression of various diseases, such as myocardial infarction (MI). However, the dynamic mechanical properties of cardiac tissues during MI progression remain poorly understood. Herein, we investigate the rheological responses of cardiac tissues at different stages of MI (i.e., early-stage, mid-stage, and late-stage) with atomic force microscopy-based microrheology. Surprisingly, we discover that all cardiac tissues exhibit a universal two-stage power-law rheological behavior at different time scales. The experimentally found power-law exponents can capture an inconspicuous initial rheological change, making them particularly suitable as markers for early-stage MI diagnosis. We further develop a self-similar hierarchical model to characterize the progressive mechanical changes from subcellular to tissue scales. The theoretically calculated mechanical indexes are found to markedly vary among different stages of MI. These new mechanical markers are applicable for tracking the subtle changes of cardiac tissues during MI progression.
Asunto(s)
Infarto del Miocardio , Humanos , Reología , Infarto del Miocardio/diagnóstico , Microscopía de Fuerza Atómica , ViscosidadRESUMEN
Studies on mechanical size effects in nanosized metals unanimously highlight both intrinsic microstructures and extrinsic dimensions for understanding size-dependent properties, commonly focusing on strengths of uniform microstructures, e.g., single-crystalline/nanocrystalline and nanoporous, as a function of pillar diameters, D. We developed a hydrogel infusion-based additive manufacturing (AM) technique using two-photon lithography to produce metals in prescribed 3D-shapes with â¼100 nm feature resolution. We demonstrate hierarchical microstructures of as-AM-fabricated Ni nanopillars (D â¼ 130-330 nm) to be nanoporous and nanocrystalline, with d â¼ 30-50 nm nanograins subtending each ligament in bamboo-like arrangements and pores with critical dimensions comparable to d. In situ nanocompression experiments unveil their yield strengths, σ, to be â¼1-3 GPa, above single-crystalline/nanocrystalline counterparts in the D range, a weak size dependence, σ â D-0.2, and localized-to-homogenized transition in deformation modes mediated by nanoporosity, uncovered by molecular dynamics simulations. This work highlights hierarchical microstructures on mechanical response in nanosized metals and suggests small-scale engineering opportunities through AM-enabled microstructures.
RESUMEN
Regulating the motion of nanoscale objects on a solid surface is vital for a broad range of technologies such as nanotechnology, biotechnology, and mechanotechnology. In spite of impressive advances achieved in the field, there is still a lack of a robust mechanism which can operate under a wide range of situations and in a controllable manner. Here, we report a mechanism capable of controllably driving directed motion of any nanoobjects (e.g., nanoparticles, biomolecules, etc.) in both solid and liquid forms. We show via molecular dynamics simulations that a nanoobject would move preferentially away from the fluctuating region of an underlying substrate, a phenomenon termed fluctuotaxis-for which the driving force originates from the difference in atomic fluctuations of the substrate behind and ahead of the object. In particular, we find that the driving force can depend quadratically on both the amplitude and frequency of the substrate and can thus be tuned flexibly. The proposed driving mechanism provides a robust and controllable way for nanoscale mass delivery and has potential in various applications including nanomotors, molecular machines, etc.
RESUMEN
The ultralow friction of two-dimensional (2D) materials, commonly referred to as superlubricity, has been associated with Moiré superlattices (MSLs). While MSLs have been shown to play a crucial role in achieving superlubricity, the long-standing challenge of achieving superlubricity in engineering has been attributed to surface roughness, which tends to destroy MSLs. Here, we show via molecular dynamics simulations that MSLs alone are not capable of capturing the friction behavior of a multilayer-graphene-coated substrate where similar MSLs persist in spite of significant changes in friction as the graphene coating thickness increases. To resolve this problem, a deformation coupled contact pattern is constructed to describe the spatial distribution of the atomic contact distance. It is shown that as the graphene thickness increases, the interfacial contact distance is determined by a competition between increased interfacial MSLs interactions and reduced out-of-plane deformation of the surface. A frictional Fourier transform model is further proposed to distinguish between intrinsic and extrinsic contributions to friction, with results showing that thicker graphene coatings exhibit lower intrinsic friction and higher sliding stability. These results shed light on the origin of interfacial superlubricity in 2D materials and may guide related applications in engineering.
RESUMEN
Hydrogels have emerged as promising materials for flexible electronics due to their unique properties, such as high water content, softness, and biocompatibility. In this perspective, we provide an overview of the development of hydrogels for flexible electronics, with a focus on three key aspects: mechanical properties, interfacial adhesion, and conductivity. We discuss the principles of designing high-performance hydrogels and present representative examples of their potential applications in the field of flexible electronics for healthcare. Despite significant progress, several challenges remain, including improving the antifatigue capability, enhancing interfacial adhesion, and balancing water content in wet environments. Additionally, we highlight the importance of considering the hydrogel-cell interactions and the dynamic properties of hydrogels in future research. Looking ahead, the future of hydrogels in flexible electronics is promising, with exciting opportunities on the horizon, but continued investment in research and development is necessary to overcome the remaining challenges.
RESUMEN
A fundamental understanding of cell shaping with confined flexible filaments, including microtubules, actin filaments, and engineered nanotubes, has been limited by the complex interplay between the cell membrane and encapsulated filaments. Here, combining theoretical modeling and molecular dynamics simulations, we investigate the packing of an open or closed filament inside a vesicle. Depending on the relative stiffness and size of the filament to the vesicle as well as the osmotic pressure, the vesicle could evolve from an axisymmetric configuration to a general configuration with a maximum of three reflection planes, and the filament could bend in or out of plane or even coil up. A plethora of system morphologies are determined. Morphological phase diagrams predicting conditions of shape and symmetry transitions are established. Organization of actin filaments or bundles, microtubules, and nanotube rings inside vesicles, liposomes, or cells are discussed. Our results provide a theoretical basis to understand cell shaping and cellular stability and to help guide the development and design of artificial cells and biohybrid microrobots.