DDX5 inhibits inflammation by modulating m6A levels of TLR2/4 transcripts during bacterial infection.

DExD/H-box helicases are crucial regulators of RNA metabolism and antiviral innate immune responses; however, their role in bacteria-induced inflammation remains unclear. Here, we report that DDX5 interacts with METTL3 and METTL14 to form an m6A writing complex, which adds N6-methyladenosine to transcripts of toll-like receptor (TLR) 2 and TLR4, promoting their decay via YTHDF2-mediated RNA degradation, resulting in reduced expression of TLR2/4. Upon bacterial infection, DDX5 is recruited to Hrd1 at the endoplasmic reticulum in an MyD88-dependent manner and is degraded by the ubiquitin-proteasome pathway. This process disrupts the DDX5 m6A writing complex and halts m6A modification as well as degradation of TLR2/4 mRNAs, thereby promoting the expression of TLR2 and TLR4 and downstream NF-κB activation. The role of DDX5 in regulating inflammation is also validated in vivo, as DDX5- and METTL3-KO mice exhibit enhanced expression of inflammatory cytokines. Our findings show that DDX5 acts as a molecular switch to regulate inflammation during bacterial infection and shed light on mechanisms of quiescent inflammation during homeostasis.

[Absorption and Three Dimensional Fluorescence Spectra of CDOM in the Water of the Taibaishan Nature Reserve].

It is very important to understand water ecology and the carbon cycle process by studying the composition, source, spectral characteristics, and influence factors of chromophoric dissolved organic matter (CDOM). The optical characteristics, composition, and source of CDOM in 71 water samples were collected from the lakes and four rivers of the Taibaishan Nature Reserve in the summer of 2019. The rivers included the Bawang, Heihe, Shitou, and Xushui Rivers. They were analyzed by UV-Vis spectral and three-dimensional fluorescence spectroscopy, combined with a parallel factor analysis model and redundant analysis. The results showed that CDOM in the water of the Taibaishan Nature Reserve contained two types of four fluorescent components, in which the humus-like components C1 and C2 were the main components of CDOM. The relative contribution of C1 and C2 to the rivers was 82%-96%, which was significantly larger than the lakes. All fluorescence indexes (FI) were larger than 1.8, the index of recent autochthonous contribution (BIX), and the index of freshness (ß:α) were all approximately 0.6. The humification indexes (HIX) of the rivers were significantly larger than those of the lakes (P<0.01). The DOM in the rivers was mainly from the forest soil of the Nature Reserve, and the water quality of the lakes was affected by tourists to some extent. The results of the redundant analysis show that the CDOM spectral characteristic parameters were significantly influenced by EC for the lakes (P<0.05) and by EC, DTN, and DOC for the rivers (P<0.01).

Bioinspired DNA nanocockleburs for targeted delivery of doxorubicin.

A variety of three-dimensional DNA assemblies have been proposed as drug carriers owing to their good biocompatibility and easy fabrication. In this study, inspired by the structure of cockleburs, a novel aptamer-tethered DNA assembly was developed for effective targeted drug delivery. The Apt-nanocockleburs were fabricated via a facile process of DNA base pairing: four complementary DNA single strands, including one aptamer-ended strand and three sticky-end strands, were applied to pair with each other. The main body of the nanocockleburs can load doxorubicin (Dox) whilst the covered aptamer spines bind to the target MCF-7 cells. The self-assembled Apt-nanocockleburs exhibit higher cell uptake as well as increased cytotoxicity to MCF-7 cells than DNA nanocockleburs without aptamers. This study provided a DNA constructing platform to produce new drug carriers with high selectivity for cancer targeted drug delivery.

[Accuracy of three-dimensional camera system based on stereophotography on photographic acquisition of deformity facial images].

OBJECTIVE: To evaluate and analyze the accuracy of three-dimensional camera system acquisition based on stereophotography for the photographic acquisition of images of facial deformities. METHODS: 3D digital models of 45 waxen facial models of patients with facial deformities were obtained via a 3D camera system based on stereophotography. A total of 19 feature lines were measured on each 3D model by using the software. The measurements taken by the coordinate-measuring machine were accepted as standard values. Statistical analysis was performed to evaluate the accuracy of the system and the corresponding factors. RESULTS: Statistical analysis results showed that the measured values of the characteristic distance obtained by 3D camera system were statistically different from the standard values (P<0.001). Convex deformities had significant influence on the measuring error of 3D camera system (P<0.05), while cleft deformities had no significant influence on the measuring error (P>0.05). The facial regions significantly influenced measuring error (P<0.05). The deformities had no significant influence on the percentage of measurement values (P>0.05). The middle facial regions had significant difference with bilateral facial regions on the percentage of measurement values (P<0.05), while the left and right facial regions had no significant difference (P>0.05). CONCLUSIONS: The accuracy of 3D camera system based on stereophotography for the photographic acquisition of facial deformities are influenced by the morphology of the facial deformities and facial regions. Moreover, the measuring error is acceptable in clinical settings.

A quasi-coaxial HV rolled pulse forming line.

A quasi-coaxial high-voltage (HV) rolled pulse forming line (rolled PFL) is researched in this paper. The PFL is rolled n circles on a support cylinder simultaneously by two layers of copper foil electrodes and two layers of insulation dielectrics. The first circle of the two electrodes are elicited in opposite directions along the axis, acting as the quasi-coaxial output structure of the PFL, and the left n - 1 circles of the PFL form a complete rolled strip line of n - 1 circles. The rolled PFL is convenient to realize HV insulation and is able to output a pulse with good quality. Characteristic parameters of the PFL are designed theoretically. Besides, the pulse discharge process of the PFL is simulated by computer simulation technology (CST) modeling, and the simulation result verifies the correctness of theory design. Furthermore, a rolled PFL with a characteristic impedance of 4.4 Ω is developed. The test characteristic impedance of the developed PFL by the incident pulse method confirms to the theory design. The discharge voltage waveform with a full width at half maximum of 57 ns of the PFL is acquired, which has a rise time of 6.8 ns. The HV test of the rolled PFL is carried out, and a discharge current pulse with an amplitude of 7 kA is acquired when the PFL is charged to 70 kV. It is calculated that the developed PFL has an energy storage density of 2.5 J/l. A Tesla generator based on 13 stages of rolled PFLs is designed, which is expected to output a 450 kV pulse with a duration of 100 ns on a 40-Ω match load. The discharge waveform of the generator is simulated by the CST software. The simulative output pulse has a rise time of 5 ns, with a flattop jitter less than 5%.

A compact multi-wire-layered secondary winding for Tesla transformer.

A compact multi-wire-layered (MWL) secondary winding for a Tesla transformer is put forward. The basic principle of this winding is to wind the metal wire on a polymeric base tube in a multi-layer manner. The tube is tapered and has high electrical strength and high mechanical strength. Concentric-circle grooves perpendicular to the axis of the tube are carved on the surface of the tube to wind the wire. The width of the groove is basically equal to the diameter of the wire so that the metal wire can be fixed in the groove without glue. The depth of the groove is n times of the diameter of the wire to realize the n-layer winding manner. All the concentric-circle grooves are connected via a spiral groove on the surface of the tube to let the wire go through. Compared with the traditional one-wire-layered (OWL) secondary winding for the Tesla transformer, the most conspicuous advantage of the MWL secondary winding is that the latter is compact with only a length of 2/n of the OWL. In addition, the MWL winding has the following advantages: high electrical strength since voids are precluded from the surface of the winding, high mechanical strength because polymer is used as the material of the base tube, and reliable fixation in the Tesla transformer as special mechanical connections are designed. A 2000-turn MWL secondary winding is fabricated with a winding layer of 3 and a total length of 1.0 m. Experiments to test the performance of this winding on a Tesla-type pulse generator are conducted. The results show that this winding can boost the voltage to 1 MV at a repetition rate of 50 Hz reliably for a lifetime longer than 104 pulses, which proves the feasibility of the MWL secondary winding.

Assembling gold nanoparticles into flower-like structures by complementary base pairing of DNA molecules with mediation by apoferritins.

Apoferritin caged gold nanoparticles (AuNPs) were assembled into flower-like structures by precise base pairing of the attached DNA molecules. The key step was to use the eight hydrophilic channels through the apoferritin to control the exact number and locations of the DNA molecules that grafted onto the caged AuNP.

A low-jitter self-break repetitive multi-stage gas switch.

A megavolt low-jitter self-break repetitive gas switch is developed by the use of the corona stabilization and the multi-stage structure in this paper. This switch is multi-stage, consisting of one corona stabilization stage and subsequent rimfire stages. The corona stabilization stage breakdowns first, then the subsequent rimfire stages are self-fired by the over-voltage from the closure of the corona stabilization stage. SF6 is used in the switch. It has been proven by experiment that the multi-stage gas switch, which consists of one 1.3-cm gap corona stabilization stage and five 0.5-cm gap rimfire stages, can operate at repetition rate frequency (PRF) of 50 Hz with a voltage jitter less than 2% in 2000 discharges. The breakdown voltage of this multi-stage switch reaches 770 kV and the single discharge current is 8.50 kA at 4 bars.

A voltage-division-type low-jitter self-triggered repetition-rate switch.

A voltage-division-type (V/N) low-jitter self-triggered multi-stage switch is put forward. It comprises of a triggered corona gap, several quasi-uniform-field gaps, and an inversion inductor. When the corona gap is in the stage of self-breakdown, the multi-stage gaps are triggered and the switch is closed via an over-voltage. This type of V/N switch has the advantage of compact structure since the auxiliary components like the gas-blowing system and the triggered system are eliminated from the whole system. It also has advantages such as low breakdown jitter and high energy efficiency. The dependence of the self-triggered voltage on the over-voltage factor and the switch operating voltage is deduced. A switch of this type is designed and fabricated and experiments to research its characteristics are conducted. The results show that this switch can operate on a voltage of 1 MV at 50 Hz and can generate 1000 successive pulses with a jitter as low as 3% and an energy efficiency as high as 90%. This V/N switch can work under a high repetition rate with a long lifetime.

Total Synthesis of Marine Glycosphingolipid Vesparioside B.

The first total synthesis of a major component of marine glycolipid vesparioside B ( Scheme 1 , 1, R1 = n-C22H45, R2 = n-C14H29) has been accomplished through a convergent [4 + 3] coupling strategy. Key steps included stereoselective installment of a set of challenging 1,2-cis-glycoside bonds. A 2-quinolinecarbonyl-assisted α-galactosylation and a novel ß-arabinosylation were developed, respectively, to synthesize the α-galactofuranosidic and the ß-arabinopyranosidic linkages. Furthermore, a 4,6-O-benzylidene-controlled α-galactopyranosylation reaction allowed the efficient connection of the left tetrasaccharide donor 2 with the right disaccharide lipid acceptor 3, hence leading to the total synthesis of 1.

[Effects of reducing N, straw returning and dicyandiamide application on winter wheat yield and nitrogen budgets in rain-fed region.] / 减氮-ç§¸ç§†è¿˜ç”°åŠåŒæ°°èƒºæ–½ç”¨å¯¹æ—±åœ°é›¨å »åŒºå†¬å°éº¦äº§é‡å’Œæ°®å¹³è¡¡çš„å½±å“.

In a 3-year field experiment, effects of reducing N fertilizer, straw returning and dicyandiamide (DCD) application on wheat yield and nitrogen budgets under wheat-fallow system were studied in rain-fed region. The experiment was carried out in Yangling of Shaanxi Province, and 4 treatments were installed including no nitrogen (CK), 220 kg N·hm-2 and no straw returning (FP), 150 kg N·hm-2 and straw returning (OPT), 150 kg N·hm-2, 7.5 kg·hm-2 DCD and straw returning (OPT+DCD). The results showed there was no remarkable difference for wheat yield between OPT and FP, but the N use efficiency of the former was 6.1% more than that of the latter, and the apparent N loss ratio was 7.2% less. OPT+DCD increased the average yield of winter wheat by 10.4% and 7.9% respectively compared to OPT and FP, the N use efficiency of winter wheat increased by 20.8% and 28.1%, and the apparent N loss ratio decreased by 8.5% and 15.1%, respectively. NH4+-N content in 0-20 cm of soil increased, accordingly the NO3--N content decreased in 40 to 45 days when DCD was applied.

Stereoselective Synthesis of α-3-Deoxy-D-manno-oct-2-ulosonic Acid (α-Kdo) Glycosides Using 5,7-O-Di-tert-butylsilylene-Protected Kdo Ethyl Thioglycoside Donors.

An efficient methodology for the synthesis of α-Kdo glycosidic bonds has been developed with 5,7-O-di-tert-butylsilylene (DTBS) protected Kdo ethyl thioglycosides as glycosyl donors. The approach permits a wide scope of acceptors to be used, thus affording biologically significant Kdo glycosides in good to excellent chemical yields with complete α-selectivity. The synthetic utility of an orthogonally protected Kdo donor has been demonstrated by concise preparation of two α-Kdo-containing oligosaccharides.

DNA-caged gold nanoparticles for controlled release of doxorubicin triggered by a DNA enzyme and pH.

DNA polyhedron-caged gold nanoparticles (AuNP) were self-assembled using four-point-star DNAs, with three strands hybridizing to each other and the fourth strand attaching to the AuNPs. The DNA-caged AuNPs can work as nanocarriers for doxorubicin, and controlled release behaviour can be triggered by both a DNA enzyme and by the pH value.

Self-assembling amphiphilic poly(propargyl methacrylate) grafted DNA copolymers into multi-strand helices.

DNA was covalently grafted onto poly(propargyl methacrylate) (PPMA) via "click" chemistry to synthesize the amphiphilic polymer brush. The PPMA-g-DNA brush could assemble into a primary structure of a nanofiber, which can be compactly spun into a multiple-strand helix in micron-length. The brush could also self-assemble with DNA labelled gold nanoparticles.

[Applications of macroinvertebrate community index and quantitative macroinvertebrate community index in monitoring and assessing river water quality].

This paper introduced the principles and applications of macroinvertebrate community index (MCI) and quantitative macroinvertebrate community index (QMCI) commonly used in New Zealand, and applied them to monitor and assess 53 sites in 40 rivers in Wellington region of the Country. Both MCI and QMCI were correlated with the rivers nutrients enrichment significantly, suggesting that it was possible to use the two indices to monitor and assess the nutrient pollution of water body. The MCI and QMCI could rapidly and easily assess water body quality, and the assessment showed that in Wellington region, the rivers water quality was overall good, but some of the rivers were poor in water quality. There was a significant correlation between MCI and QMCI, but, as compared with QMCI, MCI was better correlated with the rivers nutrients enrichment, and thus, recommended to be applied to assess water body quality. The aim of this paper was to introduce the related researchers in China how to use MCI and QMCI in monitoring and assessing water body quality, and gave some ideas on improving the development of biotic index with macroinvertebrates in rivers water quality assessment in China.

Identification of novel immunogenic proteins in Mycoplasma capricolum subsp. Capripneumoniae strain M1601.

The purpose of this study was to obtain immunogenic proteins and potential proteins of interest that were isolated from Mycoplasma capricolum subsp. capripneumoniae (Mccp) by MALDI-TOF mass spectrometry. One-dimensional SDS-PAGE and two-dimensional gel electrophoresis of whole cell preparation were conducted, and membrane proteome maps were prepared by immunoblotting. One-dimensional SDS-PAGE identified three immunogenic proteins with molecular masses in the range 29-97.2 kDa, two of which were in the membrane protein fraction. After two-dimensional gel electrophoresis, 20 highly immunogenic proteins were identified in the whole cell protein preparation while 9 immunogenic proteins were identified in the membrane protein fraction. This indicated that membrane proteins were the principle immunogenic proteins in Mccp. These proteins may have potential for the development of improved diagnostic tests and possible vaccines.

Immunological identification and characterization of extracellular serine protease-like protein encoded in a putative espP2 gene of Haemophilus parasuis.

Haemophilus parasuis is known to produce a group of virulence-associated autotransporter (AT) proteins, VtaAs; however, no other ATs have been characterized yet. On the basis of the reported sequence of a putative espP2 gene for extracellular serine protease (ESP)-like protein of H. parasuis, this putative AT gene was successfully amplified from H. parasuis serotype 5 field strain HPS0819, cloned and sequenced. The confirmed ORF sequence showed 100% identity with the reported putative espP2 gene. The recombinant ESP-like protein purified from Escherichia coli with a pET expression system was used for immunological characterization. An approximately 85 kDa antigen was detected in cultured H. parasuis by using antiserum to the purified ESP-like protein, and antibodies against the recombinant ESP-like protein were detected in a selected serum from pigs with experimental H. parasuis infection. The results indicated that H. parasuis could produce ESP-like protein in vitro and in vivo. In an immune protection study using guinea pigs, 6 out of 10 animals immunized with the recombinant ESP-like protein survived after challenge with 5 × 10(9) bacteria of strain HPS0819, whereas 7 out of 10 animals immunized with formalin-inactivated H0819 bacterin survived after challenge. The results suggest that ESP-like protein could be one of the vaccine antigen candidates for H. parasuis infection.

[Nitrate leaching characteristics of wheat-corn rotation farmland in Guanzhong area of Shaanxi].

By using in situ leaching device, a field experiment was conducted to study the effects of nitrogen fertilization rate and straw mulching on the nitrate leaching at 90 cm soil depth, nitrate accumulation in soil profile (0-100 cm), crop yield, and nitrogen balance of wheat-corn rotation farmland in Guanzhong area of Shaanxi. Six treatments were installed, i. e., no fertilization (N1, 0 kg x hm(-2) x a(-1)), conventional fertilization (N2, 471 kg x hm(-2) x a(-1)), recommended fertilization (N3, 330 kg x hm(-2) x a(-1)), reduced N application (N4, 165 kg x hm(-2) x a(-1)), increased N application (N5, 495 kg x hm(-2) x a(-1)), and recommended fertilization plus straw mulching (N3 + S). The nitrate leaching loss was increased with increasing N fertilization rate. Excessive N fertilization and straw mulching could easily cause nitrate leaching. In treatment N3 + S, the annual NO3(-) -N loss at 90 cm soil depth was the greatest (22.32 kg N x hm(-2)), and the NO3(-) -N loss from N fertilization was 16.44 kg N x hm(-2) x a(-1), being 158.9% higher than that in treatment N3. Nitrate mainly accumulated in 20-60 cm soil layer. When the N application rate was 330 kg N x hm(-2) x a(-1), straw mulching had less effect on the NO3(-) -N distribution in soil profile. No significant difference was observed in the crop yield among the treatments, but reduced N application (N4) tended to decrease the yield. Under our experimental condition, a fertilization rate of 150 kg N x hm(-2) x a(-1) for wheat and 180 kg N x hm(-2) x a(-1) for maize could ensure the crop production and reduce the soil nitrate leaching and accumulation.