RESUMEN
This paper introduces a hands-on laboratory exercise focused on assembling and testing a hybrid soft-rigid active finger prosthetic for biomechanical and biomedical engineering (BME) education. This hands-on laboratory activity focuses on the design of a myoelectric finger prosthesis, integrating mechanical, electrical, sensor (i.e., inertial measurement units (IMUs), electromyography (EMG)), pneumatics, and embedded software concepts. We expose students to a hybrid soft-rigid robotic system, offering a flexible, modifiable lab activity that can be tailored to instructors' needs and curriculum requirements. All necessary files are made available in an open-access format for implementation. Off-the-shelf components are all purchasable through global vendors (e.g., DigiKey Electronics, McMaster-Carr, Amazon), costing approximately USD 100 per kit, largely with reusable elements. We piloted this lab with 40 undergraduate engineering students in a neural and rehabilitation engineering upper year elective course, receiving excellent positive feedback. Rooted in real-world applications, the lab is an engaging pedagogical platform, as students are eager to learn about systems with tangible impacts. Extensions to the lab, such as follow-up clinical (e.g., prosthetist) and/or technical (e.g., user-device interface design) discussion, are a natural means to deepen and promote interdisciplinary hands-on learning experiences. In conclusion, the lab session provides an engaging journey through the lifecycle of the prosthetic finger research and design process, spanning conceptualization and creation to the final assembly and testing phases.
Asunto(s)
Miembros Artificiales , Ingeniería Biomédica , Humanos , Ingeniería Biomédica/educación , Extremidad Superior , Mano , CurriculumRESUMEN
BACKGROUND: Vertical displacement of the residual limb within transtibial prosthetic socket, often known as "pistoning" or downward movement, may lead to skin breakdowns and ulcers. Downward movement is particularly difficult to self-manage for diabetic individuals living with amputation because of diminished sensation in the residual limb from peripheral neuropathy. Therefore, a customizable sensor at the distal end that can alert the users when high-risk downward movement and pistoning occurs is urgently needed. OBJECTIVES: Presented herein for the first time is a lightweight, inexpensive sensing system inspired by soft robotics that can detect the occurrence and severity of downward movement at the distal end. METHODS: The sensing system consists of a multilayered torus-shaped balloon, allowing easy integration with pin-lock socket systems. The design allows sensing of vertical displacement without imparting high reaction forces back onto the distal end. A benchtop compression tester was used to characterize system performance. Systematic and parametric benchtop tests were conducted to examine the sensor's physical characteristics. Long-term (24-h) stability of the sensor was also recorded. RESULTS: Compared with water, air was determined to be a better medium with a higher linear full-scale span (FSS) because of its compressible nature. Repeatable 0.5-mm vertical displacements yielded a linear (>0.99 R2) FSS of 4.5 mm and a sensitivity of 0.8 kPa/mm. The sensing system is highly precise, with as low as 1% FSS total error band and average hysteresis of 2.84% of FSS. Over 24 h, a 4% FSS drift was observed. CONCLUSION: Sensing system characteristics, coupled with low-cost, customizable fabrication, indicates promising performance for daily use to notify and alert transtibial prosthetic users of downward movement and/or pistoning.
RESUMEN
Residual limb volume fluctuation and the resulting contact pressures are some of the key factors leading to skin ulcerations, suboptimal prosthetic functioning, pain, and diminishing quality of life of transtibial amputees. Self-management of socket fit is complicated by peripheral neuropathy, reducing the perception of pressure and pain in the residual limb. We introduce a novel proof-of-concept for a transtibial prosthetic socket liner with the potential to dynamically adjust the fit between the limb and socket. The core of the technology is a small air microfluidic chip (10 cm3 and 10 g) with 10 on-chip valves that enable sequential pressurizing of 10 actuators in custom sizes to match the pressures required by the residual limb's unique anatomy. The microfluidic chip largely reduced the number of electromechanical solenoid valves needed for sequential control of 10 actuators (2 instead of 10 valves), resulting in the reduction of the required power, size, mass, and cost of the control box toward an affordable and wearable prosthetic socket. Proof-of-concept testing demonstrated that the applied pressures can be varied in the desired sequence and to redistribute pressure. Future work will focus on integrating the system with biofidelic prosthetic sockets and residual limb models to investigate the ability to redistribute pressure away from pressure-sensitive regions (e.g., fibular head) to pressure tolerant areas. Overall, the dynamic prosthesis socket liner is very encouraging for creating a dynamic socket fit system that can be seamlessly integrated with existing socket fabrication methods for managing residual limb volume fluctuations and contact pressure.
RESUMEN
A proof of concept of a novel air microfluidics-enabled soft robotic sleeve to enable lymphedema treatment is presented. Compression sleeves represent the current, suboptimal standard of care, and stationary pumps assist with lymph drainage; however, effective systems that are truly wearable while performing daily activities are very scarce. This problematic trade-off between performance and wearability requires a new solution, which is addressed by an innovative microfluidic device. Its novelty lies in the use of light, small, and inexpensive air microfluidic chips (35 × 20 × 5 mm3 in size) that bring three major advantages compared to their traditional counterparts. First, each chip is designed with 16 fluidic channels with a cross-sectional area varying from 0.04 to 1 mm2, providing sequential inflation and uniform deflation capability to eight air bladders, thereby producing intentional gradient compression to the arm to facilitate lymph fluid circulation. The design is derived from the fundamentals of microfluidics, in particular, hydraulic resistance and paths of least resistance. Second, the air microfluidic chip enables miniaturization of at least eight bulky energy-consuming valves to two miniature solenoid valves for control increasing wearability. Third, the air microfluidic chip has no moving parts, which reduces the noise and energy needed. The cost, simplicity, and scale-up potential of developing methods for making the system are also detailed. The sequential inflation, uniform deflation, and pressure gradient are demonstrated, and the resulted compression and internal air bladder pressure were evaluated. This air microfluidics-enabled sleeve presents tremendous potential toward future improvements in self-care lymphedema management.
RESUMEN
Soft robotics has gone through a decade of tremendous progress in advancing both fundamentals and technologies. It has also seen a wide range of applications such as surgery assistance, handling of delicate foods, and wearable assistive systems driven by its soft nature that is more human friendly than traditional hard robotics. The rapid growth of soft robotics introduces many challenges, which vary with applications. Common challenges include the availability of soft materials for realizing different functions and the precision and speed of control required for actuation. In the context of wearable systems, miniaturization appears to be an additional hurdle to be overcome in order to develop truly impactful systems with a high user acceptance. Microfluidics as a field of research has gone through more than two decades of intense and focused research resulting in many fundamental theories and practical tools that have the potentials to be applied synergistically to soft robotics toward miniaturization. This perspective aims to introduce the potential synergy between microfluidics and soft robotics as a research topic and suggest future directions that could leverage the advantages of the two fields.
RESUMEN
A dynamic and low-profile unloader tibiofemoral knee brace is designed and prototyped by synergizing concepts from the fields of microfluidics and soft robotics. Microfluidics provides strategies for miniaturization and multiplexing while soft robotics afford the tools to create soft fluidic actuators and allow compliant and inherently safe robotic assistance as part of clothing. The unloader knee brace provides dynamic response during the gait cycle, where a three-point leverage torque is provided only during the stance phase to contribute to joint stability when required and enhance comfort and compliance.Clinical Relevance- This novel soft robotic brace has the potential to reduce device abandonment due to aesthetics, user non-compliance and discomfort due to a constant three-point leverage torque during the gait cycle. Also, this air microfluidics enabled soft robotic knee brace could be expanded upon to improve the efficacy of braces in general and augment the effects of physical therapy, rehabilitation and treatment of musculoskeletal conditions.
Asunto(s)
Osteoartritis de la Rodilla , Robótica , Fenómenos Biomecánicos , Tirantes , Humanos , Microfluídica , Osteoartritis de la Rodilla/terapiaRESUMEN
An open-source precision pressure pump system and control software is presented, primarily designed for the experimental microfluidics community, although others may find additional uses for this precision pressure source. This mechatronic system is coined 'µPump,' and its performance rivals that of commercially available systems, at a fraction of the cost. The pressure accuracy, stability, and resolution are 0.09%, 0.02%, and 0.02% of the full span, respectively. The settling time to reach 2 bar from zero and stabilize is less than 2 s. Material for building a four-channel µPump (approx. $3000 USD) or an eight-channel µPump (approx. $5000 USD) is approximately a quarter, or a third of the cost of buying a high-end commercial system, respectively. The design rationale is presented, together with documented design details and software, so that the system may be replicated or customized to particular applications. µPump can be used for two-phase droplet microfluidics, single-phase microfluidics, gaseous flow microfluidics and any other applications requiring precise fluid handling. µPump provides researchers, students, and startups with a cost-effective solution for precise fluid control.