RESUMEN
The metal-catalyzed sulfur reaction in lithium-sulfur (Li-S) batteries usually suffers from the strong binding of sulfur species to the catalyst surface, which destroys the electric double layer (EDL) region there. This causes rapid catalyst deactivation because it prevents the desorption of sulfur species and mass transport through the EDL is hindered. This work introduces a competitive adsorption factor (fsulfur) as a new indicator to quantify the competitive adsorption of sulfur species in the EDL and proposes an alloying method to change it by strengthening the p-d hybridization of alloying metals with electrolyte solvents. A cobalt-zinc alloy catalyst with a moderate fsulfur lowers the activation energy of the rate-limiting step of the conversion of lithium polysulfides to lithium sulfide, giving a platform capacity proportion that is 96% of the theoretical value and has a greatly improved anti-passivation ability, especially at high sulfur loadings and lean electrolyte conditions (a low E/S ratio of 5 µL mgS -1). A pouch cell using this approach has a high energy density of up to 464 Wh kg-1. Such a competitive adsorption indicator and alloying strategy offer a new guideline for catalyst design and a practical electrocatalysis solution for Li-S batteries.
RESUMEN
Heterogeneous catalysis promises to accelerate sulfur-involved conversion reactions in lithium-sulfur batteries. Solid-state Li2S dissociation remains as the rate-limiting step because of the weakly matched solid-solid electrocatalysis interfaces. We propose an electrochemically molecular-imprinting strategy to have a metal sulfide (MS) catalyst with imprinted defects in positions from which the pre-implanted Li2S has been electrochemically removed. Such tailor-made defects enable the catalyst to bind exclusively to Li atoms in Li2S reactant and elongate the Li-S bond, thus decreasing the reaction energy barrier during charging. The imprinted Ni3S2 catalyst shows the best activity due to the highest defect concentration among the MS catalysts examined. The Li2S oxidation potential is substantially reduced to 2.34 V from 2.96 V for the counterpart free of imprinted vacancies, and an Ah-level pouch cell is realized with excellent cycling performance. With a lean electrolyte/sulfur ratio of 1.80 µL mgS -1, the cell achieves a benchmarkedly high energy density beyond 500 Wh kg-1.
RESUMEN
Catalysis is crucial to improve redox kinetics in lithium-sulfur (Li-S) batteries. However, conventional catalysts that consist of a single metal element are incapable of accelerating stepwise sulfur redox reactions which involve 16-electron transfer and multiple Li2Sn (n = 2-8) intermediate species. To enable fast kinetics of Li-S batteries, it is proposed to use high-entropy alloy (HEA) nanocatalysts, which are demonstrated effective to adsorb lithium polysulfides and accelerate their redox kinetics. The incorporation of multiple elements (Co, Ni, Fe, Pd, and V) within HEAs greatly enhances the catalytically active sites, which not only improves the rate capability, but also elevates the cycling stability of the assembled batteries. Consequently, HEA-catalyzed Li-S batteries achieve a high capacity up to 1364 mAh g-1 at 0.1 C and experience only a slight capacity fading rate of 0.054% per cycle over 1000 cycles at 2 C, while the assembled pouch cell achieves a high specific capacity of 1192 mAh g-1. The superior performance of Li-S batteries demonstrates the effectiveness of the HEA catalysts with maximized synergistic effect for accelerating S conversion reactions, which opens a way to catalytically improving stepwise electrochemical conversion reactions.
RESUMEN
Li-stuffed battery materials intrinsically have surface impurities, typically Li2CO3, which introduce severe kinetic barriers and electrochemical decay for a cycling battery. For energy-dense solid-state lithium batteries (SSLBs), mitigating detrimental Li2CO3 from both cathode and electrolyte materials is required, while the direct removal approaches hardly avoid Li2CO3 regeneration. Here, a decarbonization-fluorination strategy to construct ultrastable LiF-rich interphases throughout the SSLBs by in situ reacting Li2CO3 with LiPF6 at 60 °C is reported. The fluorination of all interfaces effectively suppresses parasitic reactions while substantially reducing the interface resistance, producing a dendrite-free Li anode with an impressive cycling stability of up to 7000 h. Particularly, transition metal dissolution associated with gas evolution in the cathodes is remarkably reduced, leading to notable improvements in battery rate capability and cyclability at a high voltage of 4.5 V. This all-in-one approach propels the development of SSLBs by overcoming the limitations associated with surface impurities and interfacial challenges.
RESUMEN
A dissolved-oxygen seawater battery (SWB) can generate electricity by reducing dissolved oxygen and sacrificing the metal anode at different depths and temperatures in the ocean, acting as the basic unit of spatially underwater energy networks for future maritime exploration. However, most traditional oxygen reduction reaction (ORR) catalysts are out of work at such ultralow dissolved oxygen concentration. Here, we proposed that the electronic axial stretching of the catalyst is essentially responsible for enhancing the catalyst's sensitivity to dissolved oxygen. By modulating the lattice of iron phthalocyanine (FePc) as a model catalyst, the unique electronic axial stretching in the z-direction of planar FePc molecules was realized to achieve a boosted adsorption and electron transfer and result in a much improved ORR activity in lean-oxygen seawater environment. The peak power density of a homemade SWB using a practical carbon brush electrode decorated by the FePc is estimated to be as high as 3 W L-1. These results provide inspiring insights into the interaction between the catalyst and complicated seawater environment, and propose the electronic axial stretching as an effective indicator for the rational design of catalysts to be used in extremely lean-oxygen environment.
RESUMEN
The aqueous zinc (Zn) battery is a safe and eco-friendly energy-storage system. However, the use of Zn metal anodes is impeded by uncontrolled Zn deposition behavior. Herein, we regulate the Zn-ion deposition process for dendrite-free Zn metal anodes using an aminosilane molecular layer with high zincophilic sites and narrow molecule channels. The aminosilane molecular layer causes Zn ions to undergo consecutive processes including being captured by the amine functional groups of aminosilane and diffusing through narrow intermolecular channels before electroplating, which induces partial dehydration of hydrated Zn ions and uniform Zn ion flux, promoting reversible Zn stripping/plating. Through this molecule-induced capture-diffusion-deposition procedure of Zn ions, smooth and compact Zn electrodeposited layers are obtained. Hence, the aminosilane-modified Zn anode has high Coulombic efficiency (â¼99.5%), long lifespan (â¼3000 h), and high capacity retention in full cells (88.4% for 600 cycles). This strategy not only has great potential for achieving dendrite-free Zn anodes in practical Zn batteries but also suggests an interface-modification principle at the molecular level for other alternative metallic anodes.
RESUMEN
Hard carbon is regarded as the most promising anode material for sodium-ion (Na-ion) batteries, owing to its advantages of high abundance, low cost, and low operating potential. However, the rate capability and cycle life span of hard carbon anodes are far from satisfactory, severely hindering its industrial applications. Here, we demonstrate that the desolvation process defines the Na-ion diffusion kinetics and the formation of a solid electrolyte interface (SEI). The 3A zeolite molecular sieve film on the hard carbon is proposed to develop a step-by-step desolvation pathway that effectively reduces the high activation energy of the direct desolvation process. Moreover, step-by-step desolvation yields a thin and inorganic-dominated SEI with a lower activation energy for Na+ transport. As a result, it contributes to greatly improved power density and cycling stability for both ester and ether electrolytes. When the above insights are applied, the hard carbon anode achieves the longest life span and minimum capacity fading rate at all evaluated current densities. Moreover, with the increase in current densities, an improved plateau capacity ratio is observed. This step-by-step desolvation strategy comprehensively enhances various properties of hard carbon anodes, which provides the possibility of building practical Na-ion batteries with high power density, high energy density, and durability.
RESUMEN
Hollow carbon spheres or core-sheath porous carbon spheres have been widely used in the S cathode of lithium-sulfur batteries. However, the sphere shells or the pore walls may block the free transport of active species to a certain extent and may have a negative influence on the effective accommodation of elemental sulfur. Herein, solid but porous carbon spheres (PNCS) with large porosity and high specific surface area are developed, which enable high sulfur loading and ample cathode/electrolyte contact area, and the interconnected open pore channels significantly shorten the ion/electron transport pathways. Together with high-conducting nitrogen-doped graphene (NG), facilitated polysulfide conversion kinetics is realized in the as-assembled Li-S batteries, which deliver a high initial discharge capacity of 1445 mAh g-1 at 0.2 C, excellent rate capability of 872 mAh g-1 at 4 C, and low capacity decay of 0.047% per cycle for 500 cycles at 1 C. Even under high sulfur loading of 5.5 mg cm-2 and low electrolyte/sulfur (E/S) ratio of 5 µL mg-1, the Li-S batteries still display high specific capacities of 896 mAh g-1 and 4.96 mAh cm-2. The real application of PNCS/NG is also demonstrated by the corresponding Li-S pouch cells showing high discharging capacity and stable open circuit voltage. This work exhibits the promising application of the solid carbon spheres as the S host for effectively addressing the polysulfide shuttle and propelling the development of high-performance Li-S batteries.
RESUMEN
Electrocatalytic CO2 reduction to value-added hydrocarbon products using metallic copper (Cu) catalysts is a potentially sustainable approach to facilitate carbon neutrality. However, Cu metal suffers from unavoidable and uncontrollable surface reconstruction during electrocatalysis, which can have either adverse or beneficial effects on its electrocatalytic performance. In a break from the current catalyst design path, we propose a strategy guiding the reconstruction process in a favorable direction to improve the performance. Typically, the controlled surface reconstruction is facilely realized using an electrolyte additive, ethylenediamine tetramethylenephosphonic acid, to substantially promote CO2 electroreduction to CH4 for commercial polycrystalline Cu. As a result, a stable CH4 Faradaic efficiency of 64% with a partial current density of 192 mA cm-2, thus enabling an impressive CO2-to-CH4 conversion rate of 0.25 µmol cm-2 s-1, is achieved in an alkaline flow cell. We believe our study will promote the exploration of electrochemical reconstruction and provide a promising route for the discovery of high-performance electrocatalysts.