Isolation and characterization of poly- and oligosaccharides from the red microalga Porphyridium sp.

The current study forms part of an ongoing research effort focusing on the elucidation of the chemical structure of the sulfated extracellular polysaccharide of the red microalga Porphyridium sp. (UTEX 637). We report here on the chemical structure of a fraction separated from an acidic crude extract of the polysaccharide, as investigated by methylation analysis, carboxyl reduction-methylation analysis, desulfation-methylation analysis, partial acid hydrolysis, Smith degradation, together with 1D and 2D (1)H and (13)C NMR spectroscopy. This fraction with a molar mass of 2.39x10(5)g mol(-1) comprised D- and L-Gal, D-Glc, D-Xyl, D-GlcA, and sulfate groups in a molar ratio of 1.0:1.1:2.1:0.2:0.7. The almost linear backbone of the fraction is composed of (1-->2)- or (1-->4)-linked d-xylopyranosyl, (1-->3)-linked L-galactopyranosyl, (1-->3)-linked D-glucopyranosyl, and (1-->3)-linked D-glucopyranosyluronic acid and comprises a possible acidic building unit: [(2 or 4)-beta-D-Xylp-(L-->3)]m-alpha-D-Glcp-(1-->3)-alpha-D-GLCPA-(1-->3)-L-Galp(l-->. Attached to the backbone are sulfate groups and nonreducing terminal D-xylopyranosyl and galactopyranosyl residues, which occur at the O-6 positions of Glc-derived moieties in the main chain.

Biofabricated marine hydrozoan: a bioactive crystalline material promoting ossification of mesenchymal stem cells.

This study introduces a novel three-dimensional biomatrix obtained from the marine hydrocoral Millepora dichotoma as a scaffold for hard tissue engineering. Millepora dichotoma was biofabricated under field and laboratory conditions. Three-dimensional biomatrices were made in order to convert mesenchymal stem cells (MSCs) to exemplify osteoblastic phenotype. We investigated the effect of the biomatrices on MSCs proliferation and differentiation at 2, 3, 4, 7, 10, 14, 21, 28, and 42 days. Different analyses were made: light microscopy, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), calcium incorporation to newly formed tissue (alizarin red), bone nodule formation (von Kossa), fat aggregate formation (oil red O), collagen type I immunofluorescence, DNA concentrations, alkaline phosphatase (ALP) activity, and osteocalcin concentrations. MSCs seeded on Millepora dichotoma biomatrices showed higher levels of calcium and phosphate incorporation and higher type I collagen levels than did control Porites lutea biomatrices. ALP activity revealed that MSCs seeded on M. dichotoma biomatrices are highly osteogenic compared to those on control biomatrices. The osteocalcin content of MSCs seeded on M. dichotoma remained constant up to 2 weeks before rising to surpass that of seeded P. lutea biomatrices after 28 days. Our study thus showed that M. dichotoma biomatrices enhance the differentiation of MSCs into osteoblast and hence have excellent potential as bioscaffold for hard tissue engineering.

Conversion of adipogenic to osteogenic phenotype using crystalline porous biomatrices of marine origin.

Adipogenic and osteogenic cells share part of the early differentiation cascade of mesenchymal stem cells (MSCs). The choice of a mesenchymal precursor cell to differentiate into a particular cell type is dictated by many spatial and temporal cues, including growth factors, neighboring mature cells, and the extracellular matrix (ECM), which plays an important role in bone formation. Whether adipocytes that have initiated differentiation along one lineage can convert into osteogenic lineage by merely interacting with materials having specific surface parameters is unknown. Using crystalline three-dimensional (3D) biomatrices of marine origin (CaCO(3)), we explored whether preadipocytes can convert into osteoblasts. Cells (3T3F442A) were seeded on 3D biomatrices of marine origin (Porites lutea). Analyses were made at different time intervals-1, 2, 5, 7, 14, 21, and 28 days post-seeding. Cell characterizations were done using morphological (light microscopy and scanning electron microscopy), histological (Alizarin red, von Kossa and Oil red O staining), enzymatic (alkaline phosphatase activity, and quantitative PCR testing transcript levels of osteocalcin, alkaline phosphatase, core binding factor- 1 (Cbfa1), and fatty acid binding protein (aP2). We demonstrated 3T3F442A preadipocyte modulation and differentiation into bone-forming cells when grown on biomatrix of marine origin without addition of other bone morphogenesis inducers. We found an active ossification process typical of osteogenic phenotype as early as 2 days after seeding. It is suggested that this crystalline biomatrix having a particular 3D topology or surface parameters supports fast cellular adhesion, proliferation, and differentiation of preadipocytes to osteogenic phenotype.

An aqueous polysaccharide extract from the edible mushroom Pleurotus ostreatus induces anti-proliferative and pro-apoptotic effects on HT-29 colon cancer cells.

Anti-proliferative and pro-apoptotic activities of fractions of Pleurotus ostreatus were examined using HT-29 colon cancer cells in vitro. A hot-water-soluble fraction of the mycelium of the liquid cultured mushroom was partially isolated and chemically characterized as a low-molecular-weight alpha-glucan. HT-29 cells were exposed to the different isolates and significant inhibition of proliferation was obtained in a dose-dependent manner. Proliferation inhibition was shown to be the result of apoptotic induction because the pro-apoptotic molecules Bax and cytosolic cytochrome-c were upregulated. Fluorescence-activated cell sorter analyses of polysaccharide-treated HT-29 cells showed a high percentage of Annexin-positive cells. Here, we describe a newly identified low-molecular-weight alpha-glucan with promising anti-tumorigenic properties, and demonstrate its direct effect on colon cancer cell proliferation via induction of programmed cell death.

Low level laser irradiation stimulates osteogenic phenotype of mesenchymal stem cells seeded on a three-dimensional biomatrix.

Mesenchymal stem cells (MSCs) seeded on three-dimensional (3D) coralline (Porites lutea) biomatrices were irradiated with low-level laser irradiation (LLLI). The consequent phenotype modulation and development of MSCs towards ossified tissue was studied in this combined 3D biomatrix/LLLI system and in a control group, which was similarly grown, but was not treated by LLLI. The irradiated and non irradiated MSC were tested at 1-7, 10, 14, 21, 28 days of culturing via analysis of cellular distribution on matrices (trypan blue), calcium incorporation to newly formed tissue (alizarin red), bone nodule formation (von Kossa), fat aggregates formation (oil red O), alkaline phosphatase (ALP) activity, scanning electron microscopy (SEM) and electron dispersive spectrometry (EDS). The results obtained from the irradiated samples showed enhanced tissue formation, appearance of phosphorous peaks and calcium and phosphate incorporation to newly formed tissue. Moreover, in irradiated samples ALP activity was significantly enhanced in early stages and notably reduced in late stages of culturing. These findings of cell and tissue parameters up to 28 days of culture revealed higher ossification levels in irradiated samples compared with the control group. We suggest that both the surface properties of the 3D crystalline biomatrices and the LLLI have biostimulatory effects on the conversion of MSCs into bone-forming cells and on the induction of ex-vivo ossification.

Synthesis and characterization of a biotin-alginate conjugate and its application in a biosensor construction.

Biotin was covalently coupled with alginate in an aqueous-phase reaction by means of carbodiimide-mediated activation chemistry to provide a biotin-alginate conjugate for subsequent use in biosensor applications. The synthetic procedure was optimized with respect to pH of the reaction medium (pH 6.0), the degree of uronic acid activation (20%), and the order of addition of the reagents. The biotin-alginate conjugate was characterized by titration with 2-anilinonaphthalene-6-sulfonic acid (2,6-ANS), 4-hydroxyazobene-2'-carboxylic acid (HABA) and by an HPSEC-MALLS analytical method as well as by FTIR and 13C NMR spectroscopy. As a compromise between the need for a high percent of molar modification of the alginate, on one hand, and sufficient gelling capability, on the other hand, an optimal modification of 10-13% of biotin-alginate was used. The new biotin-alginate conjugate was used for the encapsulation of bioluminescent reporter cells into microspheres. A biosensor was prepared by conjugating these biotinylated alginate microspheres to the surface of a streptavidin-coated optical fiber, and the performance of the biosensor was demonstrated in the determination of the antibiotic, mitomycin C as a model toxin.

Bioadhesive grafted starch copolymers as platforms for peroral drug delivery: a study of theophylline release.

Nonirritant bioadhesive drug release systems based on starch-acrylic acid graft copolymers prepared by radiation of starch and acrylic acid mixtures with (60)Co were developed for buccal application. The release rate of theophylline (TPL), used as a model drug, depended on the ratio of starch to acrylic acid and on the presence of cations in the graft copolymers, but was practically not affected by the pH (between pH 3 and 7) of the dissolution medium nor by the type of starch used (corn, rice, or potato). Possible release mechanisms are discussed for specific conditions. In general, the release behavior of the graft copolymers was found to be non-Fickian, n value being between 0.6 and 0.96, suggesting that the release was controlled by a combination of tablet erosion and the diffusion of the drug from the swollen matrix. Incorporation of divalent cations into the graft copolymers led to a significant decrease in swelling erosion of the tablets as well as a substantial retardation of drug release. Highest work of adhesion was obtained with graft copolymers containing calcium ions as well as longer time of adhesion on dogs' gingiva.

Acetohydroxyacid synthase: a new enzyme for chiral synthesis of R-phenylacetylcarbinol.

We have found that acetohydroxyacid synthase (AHAS) is an efficient catalyst for the enantiospecific (> or =98% enantiomeric excess) synthesis of (R)-phenylacetylcarbinol (R-PAC) from pyruvate and benzaldehyde, despite the fact that its normal physiological role is synthesis of (S)-acetohydroxyacids from pyruvate and a second ketoacid. (R)-phenylacetylcarbinol is the precursor of important drugs having alpha and beta adrenergic properties, such as L-ephedrine, pseudoephedrine, and norephedrin. It is currently produced by whole-cell fermentations, but the use of the isolated enzyme pyruvate decarboxylase (PDC) for this purpose is the subject of active research and development efforts. Some of the AHAS isozymes of Escherichia coli have important advantages compared to PDC, including negligible acetaldehyde formation and high conversion of substrates (both pyruvate and benzaldehyde) to PAC. Acetohydroxyacid synthase isozyme I is particularly efficient. The reaction is not limited to condensation of pyruvate with benzaldehyde and other aromatic aldehydes may be used.

cis-Cyclononene conformational families and a crystallographic example of a skew-chair[bond]boat type-2 conformation.

Cyclononanes from the 7 low-energy conformational archetypal families (twist-boat[bond]chair, twist-chair[bond]boat, twist-chair[bond]chair, twist-chair[bond]twist-chair, skew-chair[bond]boat, skew-chair[bond]chair, and skew-boat[bond]boat) were transformed into 12 of 13 MM3 stochastically generated cis-cyclononenes. This was done by systematically converting single bond synclinal endocyclic torsion angles, one-at-a-time, into double-bond synperiplanar analogues, followed by geometry optimization [e.g. density functional theory B3LYP/6-31G(d)]. Torsion angles adjacent to the new double bond maintained their signs, while their magnitudes usually changed considerably to accommodate the new neighboring synperiplanar torsion angles. The six remaining torsion angles all maintained their signs and approximate magnitudes compared to corresponding values in the seven saturated parent structures. As a result, the same "twist"/"skew" conformational descriptors previously used for the saturated conformers can now also be applied to the corresponding unsaturated analogues. Three conformational families have multiple members (subtypes) in which the double bond is located at different positions on the same ring conformation. The solid-state structures of (+/-)-1-phenyl-1,3,4,5,6,7-hexahydro-2,6-benzoxazonine-6-carbonitrile (22) and (1RS,3SR)-1-phenyl-3-methyl-1,3,4,5,6,7-hexahydro-2,6-benzoxazonine-6-carbonitrile (23) were determined by single-crystal X-ray diffraction analysis. The asymmetric unit of the Ponemacr; unit cell for 22 contains two symmetry-unrelated molecules, both of which exhibit a skew-chair-boat (SCBtype-2) conformation identical to that found for crystalline 23. This subtype has yet to be found in the Cambridge Crystallographic DataBase. Crystal lattice packing considerations alone cannot explain the observation of the SCBtype-2 conformation since (1)H NMR spectroscopy shows the same conformational bias when the crystals are dissolved in CDCl(3).

Aqueous enantioselective hydrogenation of methyl 2-acetamidoacrylate with Rh-MeDuPHOS occluded in PDMS.

A new chiral heterogeneous catalytic system obtained by occlusion of the Rh-MeDuPHOS complex in a polydimethylsiloxane film was tested in the asymmetric hydrogenation of methyl 2-acetamidoacrylate in aqueous medium.

Sulfation of extracellular polysaccharides of red microalgae: preparation, characterization and properties.

Polysaccharides are natural polymers with a variety of properties that may be translated into significant commercial applications. A program of chemical modifications of the extracellular polysaccharides of red microalgae, such as Porphyridium sp. and Rhodella reticulata, has been undertaken by our group in order to tailor new properties and hence to broaden the spectrum of potential applications. These algal biopolymers are anionic in nature due to the presence of uronic acids (about 10%) and sulfate half esters (about 7%). In the current study, the sulfate content of these biopolymers was increased to 35-40% by means of sulfation agents such as pyridine SO(3), DMF.SO(3) and ClSO(3)H. Reaction conditions were optimized in a model system based on potato starch as the model polysaccharide (type of reagent, temperature and time of reaction). After work-up procedures, the highest sulfate content was obtained by sulfation of the polysaccharide of Porphyridium sp. with a mixture of ClSO(3)H and pyridine at 70 degrees C for 1 h. The sulfated products were characterized by chemical and rheological analyses, IR spectroscopy, and GPC-HPLC chromatography. "Oversulfated" polymers (having sulfate contents exceeding 20%) with high molecular weights were found to inhibit mammalian cell growth when used at certain concentrations; for example, over 80% inhibition was obtained when oversulfated polymers at a concentration of 200 microg/ml were tested on T-cell lymphoma line 24-1. These preliminary results indicate that the modified polysaccharides do indeed exhibit potential therapeutic properties.