Cerebral malaria (CM), a severe neurological pathology caused by Plasmodium falciparum infection, poses a significant global health threat and has a high mortality rate. Conventional therapeutics cannot cross the blood-brain barrier (BBB) efficiently. Therefore, finding effective treatments remains challenging. The novelty of the treatment proposed in this study lies in the feasibility of intranasal (IN) delivery of the nanostructured lipid carrier system (NLC) combining microRNA (miRNA) and artemether (ARM) to enhance bioavailability and brain targeting. The rational use of NLCs and RNA-targeted therapeutics could revolutionize the treatment strategies for CM management. This study can potentially address the challenges in treating CM, allowing drugs to pass through the BBB. The NLC formulation was developed by a hot-melt homogenization process utilizing 3% (w/w) precirol and 1.5% (w/v) labrasol, resulting in particles with a size of 94.39 nm. This indicates an effective delivery to the brain via IN administration. The results further suggest the effective intracellular delivery of encapsulated miRNAs in the NLCs. Investigations with an experimental cerebral malaria mouse model showed a reduction in parasitaemia, preservation of BBB integrity, and reduced cerebral haemorrhages with the ARM+ miRNA-NLC treatment. Additionally, molecular discoveries revealed that nicotinamide adenine dinucleotide phosphate oxidase 2 (NOX2) and Interleukin-6 (IL-6) levels were reduced in the treated groups in comparison to the CM group. These results support the use of nanocarriers for IN administration, offering a viable method for mitigating CM through the increased bioavailability of therapeutics. Our findings have far-reaching implications for future research and personalized therapy.
With the rising prevalence of diabetes and its association with cognitive impairment, interest in the use of dietary alkaloids and other natural products has grown significantly. Understanding how these compounds manage diabetic cognitive dysfunction (DCD) is crucial. This comprehensive review explores the etiology of DCD and the effects of alkaloids in foods and dietary supplements that have been investigated as DCD therapies. Data on how dietary alkaloids like berberine, trigonelline, caffeine, capsaicin, 1-deoxynojirimycin, nuciferine, neferine, aegeline, tetramethylpyrazine, piperine, and others regulate cognition in diabetic disorders were collected from PubMed, Research Gate, Web of Science, Science Direct, and other relevant databases. Dietary alkaloids could improve memory in behavioral models and modulate the mechanisms underlying the cognitive benefits of these compounds, including their effects on glucose metabolism, gut microbiota, vasculopathy, neuroinflammation, and oxidative stress. Evidence suggests that dietary alkaloids hold promise for improving cognition in diabetic patients and could open exciting avenues for future research in diabetes management.
Diabetic retinopathy (DR) is a microvascular complication associated with vascular endothelial growth factor (VEGF) overexpression. Therapeutic delivery to the retina is a challenging phenomenon due to ocular biological barriers. Sorafenib tosylate (ST) is a lipophilic drug with low molecular weight, making it ineffective at bypassing the blood-retinal barrier (BRB) to reach the target site. Cubosomes are potential nanocarriers for encapsulating and releasing such drugs in a sustained manner. The present research aimed to compare the effects of sorafenib-tosylate-loaded cubosome nanocarriers (ST-CUBs) and a sorafenib tosylate suspension (ST-Suspension) via subconjunctival route in an experimental DR model. In this research, ST-CUBs were prepared using the melt dispersion emulsification technique. The distribution of prepared nanoparticles into the posterior eye segments was studied with confocal microscopy. The ST-CUBs were introduced into rats' left eye via subconjunctival injection (SCJ) and compared with ST-Suspension to estimate the single-dose pharmacokinetic profile. Streptozotocin (STZ)-induced diabetic albino rats were treated with ST-CUBs and ST-Suspension through the SCJ route once a week for 28 days to measure the inhibitory effect of ST on the diabetic retina using histopathology and immunohistochemistry (IHC) examinations. Confocal microscopy and pharmacokinetic studies showed an improved concentration of ST from ST-CUBs in the retina. In the DR model, ST-CUB treatment using the SCJ route exhibited decreased expression levels of VEGF, pro-inflammatory cytokines, and adhesion molecules compared to ST-Suspension. From the noted research findings, it was concluded that the CUBs potentially enhanced the ST bioavailability. The study outcomes established that the developed nanocarriers were ideal for delivering the ST-CUBs via the SCJ route to target the retina for facilitated DR management.
This work aimed to overcome the disadvantages of the oral administration of beta-caryophyllene and boost efficiency by developing a nanostructured lipid carrier for topical administration of the drug in skin disorders. The heat emulsification method was utilized to produce beta-caryophyllene-loaded nanostructured lipid carriers. The newly created formulation was examined for its particle size, entrapment efficiency, and zeta potential after being improved using the Box-Behnken Design. The chosen formulation underwent tests to determine its ex vivo skin retention, dermatokinetic, in vitro release, antioxidant, and confocal laser scanning microscopy study. The findings of the characterization of the nanostructured lipid carriers demonstrated that the particles had a spherical form and a size of 210.86 nm (0.263 polydispersity index). The entrapment efficiency was determined to be 86.74%, and the zeta potential was measured to be -26.97 mV. The in vitro release investigation showed that nanostructure lipid carriers were capable of releasing regulated amounts of beta-caryophyllene for up to 24 hrs. In comparison to the traditional gel formulation, the ex vivo investigation demonstrated a 1.94-fold increase in the skin's capacity to retain the substance. According to the findings of the study, nanostructure lipid carriers loaded with beta-caryophyllene have the potential to be investigated for use as a topical administration method in skin disorders with enhanced skin retention and effectiveness.
The COVID-19 virus has infected millions of people and became a global pandemic in 2020. The efficacy of laboratory and clinical parameters in the diagnosis and monitoring of COVID-19 has been established. The CT scan has been identified as a crucial tool in the prognostication of COVID-19 pneumonia. Moreover, it has been proposed that the CT severity score can be utilized for the diagnosis and prognostication of COVID-19 disease severity and exhibits a correlation with laboratory findings such as inflammatory markers, blood glucose levels, and clinical parameters such as endotracheal intubation, oxygen saturation, mortality, and hospital admissions. Nevertheless, the correlation between the CT severity score and clinical or laboratory parameters has not been firmly established. The objective of this study is to provide a comprehensive review of the aforementioned association. This review used a systematic approach to collate and assess the existing literature that investigates the correlation between CT severity score and laboratory and clinical parameters. The search was conducted using Embase Ovid, MEDLINE Ovid, and PubMed databases, covering the period from inception to 20 May 2023. This review identified 20 studies involving more than 8000 participants of varying designs. The findings showed that the CT severity score is positively associated with laboratory and clinical parameters in COVID-19 patients. The findings indicate that the CT severity score exhibits a satisfactory level of prognostic accuracy in predicting mortality among patients with COVID-19.
In this study, elastic nanovesicles, constructed of phospholipids optimized by Quality by Design (QbD), release 6-gingerol (6-G), a natural chemical that may alleviate osteoporosis and musculoskeletal-related pain. A 6-gingerol-loaded transfersome (6-GTF) formulation was developed using a thin film and sonication approach. 6-GTFs were optimized using BBD. Vesicle size, PDI, zeta potential, TEM, in vitro drug release, and antioxidant activity were evaluated for the 6-GTF formulation. The optimized 6-GTF formulation had a 160.42 nm vesicle size, a 0.259 PDI, and a -32.12 mV zeta potential. TEM showed sphericity. The 6-GTF formulation's in vitro drug release was 69.21%, compared to 47.71% for the pure drug suspension. The Higuchi model best described 6-G release from transfersomes, while the Korsmeyer-Peppas model supported non-Fickian diffusion. 6-GTF had more antioxidant activity than the pure 6-G suspension. The optimized transfersome formulation was converted into a gel to improve skin retention and efficacy. The optimized gel had a spreadability of 13.46 ± 4.42 g·cm/s and an extrudability of 15.19 ± 2.01 g/cm2. The suspension gel had a 1.5 µg/cm2/h ex vivo skin penetration flux, while the 6-GTF gel had 2.71 µg/cm2/h. Rhodamine B-loaded TF gel reached deeper skin layers (25 µm) compared to the control solution in the CLSM study. The gel formulation's pH, drug concentration, and texture were assessed. This study developed QbD-optimized 6-gingerol-loaded transfersomes. 6-GTF gel improved skin absorption, drug release, and antioxidant activity. These results show that the 6-GTF gel formulation has the ability to treat pain-related illnesses effectively. Hence, this study offers a possible topical treatment for conditions connected to pain.
Drug Carriers , Phospholipids , Humans , Phospholipids/pharmacology , Administration, Cutaneous , Drug Carriers/pharmacology , Antioxidants/therapeutic use , Antioxidants/pharmacology , Skin , Pain , Particle Size
The purpose of the present work was to develop nanoemulsion-based formulations of mirtazapine for intranasal delivery using a spray actuator to target the brain for treating depression. Research on the solubility of medications in different oils, surfactants, co-surfactants, and solvents has been done. Using pseudo-ternary phase diagrams, the various ratios of the surfactant and co-surfactant mix were computed. Thermotriggered nanoemulsion was formulated using different concentrations of poloxamer 407 (i.e., 15%, 15.5%, 16%, 16.5% up to 22%). Similarly, mucoadhesive nanoemulsion using 0.1% Carbopol and water-based plain nanoemulsions were also prepared for comparative assessment. The developed nanoemulsions were analyzed for physicochemical properties, i.e., physical appearance, pH, viscosity, and drug content. Drug-excipient incompatibility was determined by Fourier transform infrared spectral (FTIR) analysis and differential scanning calorimetry (DSC). In vitro drug diffusion studies were conducted for optimized formulations. Among the three formulations, RD1 showed the highest percentage of drug release. Ex vivo drug diffusion studies were conducted on freshly excised sheep nasal mucosa with Franz diffusion cell simulated nasal fluid (SNF) for all three formulations up to 6 h, and the thermotriggered nanoemulsion (RD1) showed 71.42% drug release with 42.64 nm particle size and a poly dispersity index of 0.354. The zeta potential was found to be -6.58. Based on the above data, it was concluded that thermotriggered nanoemulsion (RD1) has great potential to be used as an intranasal gel for treating depression in patients. It can offer great benefits by reducing dosing frequency and improving bioavailability of mirtazapine by direct nose-to-brain delivery.
A novel approach to the treatment of sinusitis is the use of nasal stents. The stent is loaded with a corticosteroid, which prevents complications in the wound-healing process. The design is such that it will prevent the sinus from closing again. The stent is 3D printed using a fused deposition modeling printer, which enhances the customization. The polymer utilized for the purpose of 3D printing is polylactic acid (PLA). The compatibility between the drugs and polymers is confirmed by FT-IR and DSC. The drug is loaded onto the polymer by soaking the stent in the drug's solvent, known as the solvent casting method. Using this method, approximately 68% of drug loading is found to be achieved onto the PLA filaments, and a total of 72.8% of drug loading is obtained in terms of the 3D-printed stent. Drug loading is confirmed by the morphological characteristics of the stent by SEM, where the loaded drug is clearly visible as white specks on the surface of the stent. Drug release characterization is conducted by dissolution studies, which also confirm drug loading. The dissolution studies show that the release of drugs from the stent is constant and not erratic. Biodegradation studies were conducted after increasing the rate of degradation of PLA by soaking it in PBS for a predetermined duration of time. The mechanical properties of the stent, such as stress factor and maximum displacement, are discussed. The stent has a hairpin-like mechanism for opening inside the nasal cavity.
This work presents the results of using tree-based models, including Gradient Boosting, Extra Trees, and Random Forest, to model the solubility of hyoscine drug and solvent density based on pressure and temperature as inputs. The models were trained on a dataset of hyoscine drug with known solubility and density values, optimized with WCA algorithm, and their accuracy was evaluated using R2, MSE, MAPE, and Max Error metrics. The results showed that Gradient Boosting and Extra Trees models had high accuracy, with R2 values above 0.96 and low MAPE and Max Error values for both solubility and density output. The Random Forest model was less accurate than the other two models. These findings demonstrate the effectiveness of tree-based models for predicting the solubility and density of chemical compounds and have potential applications in determination of drug solubility prior to process design by correlation of solubility and density to input parameters including pressure and temperature.
Random Forest , Scopolamine , Solvents , Solubility , Artificial Intelligence
Niosomes are multilamellar vesicles that effectively transfer active ingredients into the skin's layers. To improve the active substance's penetration across the skin, these carriers are frequently utilized as topical drug delivery systems. Essential oils (EOs) have garnered significant interest in the field of research and development owing to their various pharmacological activities, cost-effectiveness, and simple manufacturing techniques. However, these ingredients undergo degradation and oxidation over time, leading to a loss of functionality. Niosome formulations have been developed to deal with these challenges. The main goal of this work was to create a niosomal gel of carvacrol oil (CVC) to improve its penetration into the skin for anti-inflammatory actions and stability. By changing the ratio of drug, cholesterol and surfactant, various formulations of CVC niosomes were formulated using Box Behnken Design (BBD). A thin-film hydration technique using a rotary evaporator was employed for the development of niosomes. Following optimization, the CVC-loaded niosomes had shown: 180.23 nm, 0.265, -31.70 mV, and 90.61% of vesicle size, PDI, zeta potential, and EE%. An in vitro study on drug release discovered the rates of drug release for CVC-Ns and CVC suspension, which were found to be 70.24 ± 1.21 and 32.87 ± 1.03, respectively. The release of CVC from niosomes best fit the Higuchi model, and the Korsmeyer-Peppas model suggests that the release of the drug followed the non-Fickian diffusion. In a dermatokinetic investigation, niosome gel significantly increased CVC transport in the skin layers when compared to CVC-conventional formulation gel (CVC-CFG). Confocal laser scanning microscopy (CLSM) of rat skin exposed to the rhodamine B-loaded niosome formulation showed a deeper penetration of 25.0 µm compared to the hydroalcoholic rhodamine B solution (5.0 µm). Additionally, the CVC-N gel antioxidant activity was higher than that of free CVC. The formulation coded F4 was selected as the optimized formulation and then gelled with carbopol to improve its topical application. Niosomal gel underwent tests for pH determination, spreadability, texture analysis, and CLSM. Our findings imply that the niosomal gel formulations could represent a potential strategy for the topical delivery of CVC in the treatment of inflammatory disease.
Methyl anthranilate (MA) is a naturally derived compound commonly used in cosmetic products, such as skin care products, fine perfumes, etc. The goal of this research was to develop a UV-protective sunscreen gel using methyl-anthranilate-loaded silver nanoparticles (MA-AgNPs). The microwave approach was used to develop the MA-AgNPs, which were then optimized using Box-Behnken Design (BBD). Particle size (Y1) and absorbance (Y2) were chosen as the response variables, while AgNO3 (X1), methyl anthranilate concentration (X2), and microwave power (X3) were chosen as the independent variables. Additionally, the prepared AgNPs were approximated for investigations on in vitro active ingredient release, dermatokinetics, and confocal laser scanning microscopy (CLSM). The study's findings showed that the optimal MA-loaded AgNPs formulation had a particle size, polydispersity index, zeta potential, and percentage entrapment efficiency (EE) of 200 nm, 0.296 mV, -25.34 mV, and 87.88%, respectively. The image from transmission electron microscopy (TEM) demonstrated the spherical shape of the nanoparticles. According to an in vitro investigation on active ingredient release, MA-AgNPs and MA suspension released the active ingredient at rates of 81.83% and 41.62%, respectively. The developed MA-AgNPs formulation was converted into a gel by using Carbopol 934 as a gelling agent. The spreadability and extrudability of MA-AgNPs gel were found to be 16.20 and 15.190, respectively, demonstrating that the gel may spread very easily across the skin's surface. The MA-AgNPs formulation demonstrated improved antioxidant activity in comparison to pure MA. The MA-AgNPs sunscreen gel formulation displayed non-Newtonian pseudoplastic behaviour, which is typical of skin-care products, and was found to be stable during the stability studies. The sun protection factor (SPF) value of MA-AgNPG was found to be 35.75. In contrast to the hydroalcoholic Rhodamine B solution (5.0 µm), the CLSM of rat skin treated with the Rhodamine B-loaded AgNPs formulation showed a deeper penetration of 35.0 µm, indicating the AgNPs formulation was able to pass the barrier and reach the skin's deeper layers for more efficient delivery of the active ingredient. This can help with skin conditions where deeper penetration is necessary for efficacy. Overall, the results indicated that the BBD-optimized MA-AgNPs provided some of the most important benefits over conventional MA formulations for the topical delivery of methyl anthranilate.
The aim of this research work was to formulate and evaluate ciprofloxacin hydrochloride-loaded nanocarriers for treating dental infections and bone regeneration. Periodontal infection is associated with inflammation, soft tissue destruction, and bone loss. The objective of the study was to extract ß tricalcium phosphate (ß-TCP) from coral beach sand using the hydrothermal conversion method and load these nanocarriers with ciprofloxacin hydrochloride. The developed drug-loaded nanocarriers were evaluated for various parameters. In vitro drug-loading studies showed the highest drug loading of 71% for F1 with a drug: carrier ratio compared to plain ciprofloxacin hydrochloride gel. ß-TCP and nanocarriers were evaluated for powder characteristics and the results were found to have excellent and fair flowability. In vitro drug release studies conducted over a period of 5 days confirmed the percentage drug release of 96% at the end of 120 h. Nanocarriers were found to be effective against S. aureus and E. coli showing statistically significant antibacterial activity at (* p < 0.05) significant level as compared to plain ciprofloxacin hydrochloride gel. The particle size of ß-TCP and nanocarriers was found to be 2 µm. Fourier transform infra-red studies showed good compatibility between the drug and the excipients. Differential scanning calorimetry studies revealed the amorphous nature of the nanocarriers as evident from the peak shift. It is obvious from the XRD studies that the phase intensity was reduced, which demonstrates a decrease in crystallinity. Nanocarriers released the drug in a controlled manner, hence may prove to be a better option to treat dental caries as compared to conventional treatments.
Anti-Bacterial Agents , Dental Caries , Humans , Anti-Bacterial Agents/chemistry , Staphylococcus aureus , Escherichia coli , Ciprofloxacin/pharmacology , Ciprofloxacin/chemistry
The death rate from breast cancer (BC) has dropped due to early detection and sophisticated therapeutic options, yet drug resistance and relapse remain barriers to effective, systematic treatment. Multiple mechanisms underlying miRNAs appear crucial in practically every aspect of cancer progression, including carcinogenesis, metastasis, and drug resistance, as evidenced by the elucidation of drug resistance. Non-coding RNAs called microRNAs (miRNAs) attach to complementary messenger RNAs and degrade them to inhibit the expression and translation to proteins. Evidence suggests that miRNAs play a vital role in developing numerous diseases, including cancer. They affect genes critical for cellular differentiation, proliferation, apoptosis, and metabolism. Recently studies have demonstrated that miRNAs serve as valuable biomarkers for BC. The contrast in the expression of miRNAs in normal tissue cells and tumors suggest that miRNAs are involved in breast cancer. The important aspect behind cancer etiology is the deregulation of miRNAs that can specifically influence cellular physiology. The main objective of this review is to emphasize the role and therapeutic capacity of tumor suppressor miRNAs in BC and the advancement in the delivery system that can deliver miRNAs specifically to cancerous cells. Various approaches are used to deliver these miRNAs to the cancer cells with the help of carrier molecules, like nanoparticles, poly D, L-lactic-co-glycolic acid (PLGA) particles, PEI polymers, modified extracellular vesicles, dendrimers, and liposomes. Additionally, we discuss advanced strategies of TS miRNA delivery techniques such as viral delivery, self-assembled RNA-triple-helix hydrogel drug delivery systems, and hyaluronic acid/protamine sulfate inter-polyelectrolyte complexes. Subsequently, we discuss challenges and prospects on TS miRNA therapeutic delivery in BC management so that miRNAs will become a routine technique in developing individualized patient profiles.
Immunotherapy shows a lot of promise for addressing the problems with traditional cancer treatments. Researchers and clinicians are working to create innovative immunological techniques for cancer detection and treatment that are more selective and have lower toxicity. An emerging field in cancer therapy, immunomodulation offers patients an alternate approach to treating cancer. These therapies use the host's natural defensive systems to identify and remove malignant cells in a targeted manner. Cancer treatment is now undergoing somewhat of a revolution due to recent developments in nanotechnology. Diverse nanomaterials (NMs) have been employed to overcome the limits of conventional anti-cancer treatments such as cytotoxic, surgery, radiation, and chemotherapy. Aside from that, NMs could interact with live cells and influence immune responses. In contrast, unexpected adverse effects such as necrosis, hypersensitivity, and inflammation might result from the immune system (IS)'s interaction with NMs. Therefore, to ensure the efficacy of immunomodulatory nanomaterials, it is essential to have a comprehensive understanding of the intricate interplay that exists between the IS and NMs. This review intends to present an overview of the current achievements, challenges, and improvements in using immunomodulatory nanomaterials (iNMs) for cancer therapy, with an emphasis on elucidating the mechanisms involved in the interaction between NMs and the immune system of the host.
Antineoplastic Agents , Nanostructures , Neoplasms , Humans , Nanostructures/therapeutic use , Nanotechnology , Antineoplastic Agents/therapeutic use , Immunotherapy , Neoplasms/drug therapy
Major epigenetic alterations, such as chromatin modifications, DNA methylation, and miRNA regulation, have gained greater attention and play significant roles in oncogenesis, representing a new paradigm in our understanding of cancer susceptibility. These epigenetic changes, particularly aberrant promoter hypermethylation, abnormal histone acetylation, and miRNA dysregulation, represent a set of epigenetic patterns that contribute to inappropriate gene silencing at every stage of cancer progression. Notably, the cancer epigenome possesses various HDACs and DNMTs, which participate in the histone modifications and DNA methylation. As a result, there is an unmet need for developing the epigenetic inhibitors against HDACs and DNMTs for cancer therapy. To date, several epigenetically active synthetic inhibitors of DNA methyltransferases and histone deacetylases have been developed. However, a growing body of research reports that most of these synthetic inhibitors have significant side effects and a narrow window of specificity for cancer cells. Targeting tumor epigenetics with phytocompounds that have the capacity to modulate abnormal DNA methylation, histone acetylation, and miRNAs expression is one of the evolving strategies for cancer prevention. Encouragingly, there are many bioactive phytochemicals, including organo-sulfur compounds that have been shown to alter the expression of key tumor suppressor genes, oncogenes, and oncogenic miRNAs through modulation of DNA methylation and histones in cancer. In addition to vitamins and microelements, dietary phytochemicals such as sulforaphane, PEITC, BITC, DADS, and allicin are among a growing list of naturally occurring anticancer agents that have been studied as an alternative strategy for cancer treatment and prevention. Moreover, these bioactive organo-sulfur compounds, either alone or in combination with other standard cancer drugs or phytochemicals, showed promising results against many cancers. Here, we particularly summarize and focus on the impact of specific organo-sulfur compounds on DNA methylation and histone modifications through targeting the expression of different DNMTs and HDACs that are of particular interest in cancer therapy and prevention.
Antimicrobial resistance is a major global health concern and one of the gravest challenges to humanity today. Antibiotic resistance has been acquired by certain bacterial strains. As a result, new antibacterial drugs are urgently required to combat resistant microorganisms. Species of Trichoderma are known to produce a wide range of enzymes and secondary metabolites that can be exploited for the synthesis of nanoparticles. In the present study, Trichoderma asperellum was isolated from rhizosphere soil and used for the biosynthesis of ZnO NPs. To examine the antibacterial activity of ZnO NPs against human pathogens, Escherichia coli and Staphylococcus aureus were used. The obtained antibacterial results show that the biosynthesized ZnO NPs were efficient antibacterial agents against the pathogens E. coli and S. aureus, with an inhibition zone of 3-9 mm. The ZnO NPs were also effective in the prevention of S. aureus biofilm formation and adherence. The current work shows that the MIC dosages of ZnO NPs (25, 50, and 75 µg/mL) have effective antibacterial activity and antibiofilm action against S. aureus. As a result, ZnO NPs can be used as a part of combination therapy for drug-resistant S. aureus infections, where biofilm development is critical for disease progression.
Aggregation of Amyloid-ß (Aß) leads to the formation and deposition of neurofibrillary tangles and plaques which is the main pathological hallmark of Alzheimer's disease (AD). The bioavailability of the drugs and their capability to cross the BBB plays a crucial role in the therapeutics of AD. The present study evaluates the Memantine Hydrochloride (MeHCl) and Tramiprosate (TMPS) loaded solid lipid nanoparticles (SLNs) for the clearance of Aß on SHSY5Y cells in rat hippocampus. Molecular docking and in vitro Aß fibrillation were used to ensure the binding of drugs to Aß. The in vitro cell viability study showed that the M + T SLNs showed enhanced neuroprotection against SHSY5Y cells than the pure drugs (M + T PD) in presence of Aß (80.35µM ± 0.455 µM) at a 3:1 molar ratio. The Box-Behnken Design (BBD) was employed to optimize the SLNs and the optimized M + T SLNs were further characterized by %drug entrapment efficiency (99.24 ± 3.24 of MeHCl and 89.99 ± 0.95 of TMPS), particle size (159.9 ± 0.569 nm), PDI (0.149 ± 0.08), Zeta potential (-6.4 ± 0.948 mV), Transmission Electron Microscopy (TEM), Atomic Force Microscopy (AFM) and in vitro drug release. The TEM & AFM analysis showed irregularly spherical morphology. In vitro release of SLNs was noted up to 48 h; whereas the pure drugs released completely within 3 hrs. M + T SLNs revealed an improved pharmacokinetic profile and a 4-fold increase in drug concentration in the brain when compared to the pure drug. Behavioral tests showed enhanced spatial memory and histological studies confirmed reduced Aß plaques in rat hippocampus. Furthermore, the levels of Aß decreased in AlCl3-induced AD. Thus, all these noted results established that the M + T SLNs provide enhanced neuroprotective effects when compared to pure and individual drugs and can be a promising therapeutic strategy for the management of AD.
The current study was designed to investigate the feasibility of incorporating the water-insoluble lipophilic drug Alprazolam (Alp) into solid lipid nanoparticles (SLNs) to offer the combined benefits of the quick onset of action along with the sustained release of the drug. Therefore, compritol-based alprazolam-loaded SLNs (Alp-SLNs) would provide early relief from anxiety and sleep disturbances and long-lasting control of symptoms in patients with depression, thereby enhancing patient compliance. The optimized Alp-SLNs analyzed by DLS and SEM showed consistent particle size of 92.9 nm with PI values and standard deviation of the measurements calculated at <0.3 and negative surface charge. These characteristic values demonstrate the desired level of homogeneity and good physical stability of Alp-SLNs. The SLNs had a good entrapment efficiency (89.4%) and high drug-loading capacity (77.9%). SEM analysis revealed the smooth spherical morphology of the SLNs. The physical condition of alprazolam and absence of interaction among formulation components in Alp-SLNs was confirmed by FTIR and DSC analyses. XRD analysis demonstrated the molecular dispersion of crystalline alprazolam in Alp-SLNs. The in vitro release study implied that the release of Alp from the optimized Alp-SLN formulation was sustained as compared to the Alp drug solution because Alp-SLNs exhibited sustained release of alprazolam over 24 h. Alp-SLNs are a promising candidate to achieve sustained release of the short-acting drug Alp, thereby reducing its dosing frequency and enhancing patient compliance.
Alprazolam , Nanoparticles , Humans , Delayed-Action Preparations , Drug Carriers/chemistry , Lipids/chemistry , Nanoparticles/chemistry , Particle Size
An amorphous solid dispersion (ASD) of carvedilol (CVL) was prepared via the solvent evaporation method, using cellulose derivatives as polymeric precipitation inhibitors (PPIs). The prepared ASDs existed in the amorphous phase, as revealed by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM). The Fourier-transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) results confirmed the compatibility between CVL and the polymers used. The ASDs characteristics were evaluated, with no change in viscosity, a pH of 6.8, a polydispersity index of 0.169, a particle size of 423-450 nm, and a zeta potential of 3.80 mV. Crystal growth inhibition was assessed for 180 min via an infusion precipitation study in simulated intestinal fluid (SIF). The interactions between the drug and polymers were established in great detail, using nuclear magnetic resonance (NMR) spectroscopy, nuclear Overhauser effect spectroscopy (NOESY), and Raman spectroscopy studies. Dielectric analysis was employed to determine the drug-polymer interactions between ion pairs and to understand ion transport behavior. In vivo oral kinetics and irritation studies performed on Wistar rats have demonstrated promising biocompatibility, stability, and the enhanced bioavailability of CVL. Collectively, the stable ASDs of CVL were developed using cellulose polymers as PPIs that would inhibit drug precipitation in the gastrointestinal tract and would aid in achieving higher in vivo drug stability and bioavailability.
Resveratrol and Gefitinib are adjunct therapies for various cancers; however, both have been limited by low solubility, low cellular uptake, and bioavailability issues. As a result, this research aimed to develop an accurate, precise, selective, and sensitive reverse-phase high-performance liquid chromatography (RP-HPLC) method to simultaneously determine both compounds in nanoformulation and Glioma cells. The phenomenex luna C8 column, a mobile phase (80: 20 ratios of acetonitrile: 200 mM ammonium acetate) with a flow rate of 1 mL. min-1, 40 ± 0.2 °C as a column temperature, and the injection volume was 20 µl were selected as optimized chromatographic conditions. Retention time (RT) of resveratrol (1.80 min) and gefitinib (2.56 min) were identified using an optimized analytical method and detected at 345 nm (isosbestic point). The approach was proven to be specific for resveratrol and gefitinib analysis in the existence of PHLNPs, precise (RSD 2 %), and accurate (>90 %). The simultaneous analytical method was successfully developed to identify percentage drug entrapment efficiency (% DEE), % drug loading (% DL) of resveratrol and gefitinib in PHLNPs, and secondary estimates of in-vitro drug release profile and percentage cellular uptake studies. The in-vitro results revealed that the developed analytical method could simultaneously detect and quantify these drugs in other nanoformulations and in-vivo studies.
Glioma , Polymers , Humans , Gefitinib , Resveratrol , Chromatography, High Pressure Liquid/methods , Glioma/drug therapy
