BACKGROUND: Time is a scarce resource for physicians. One medical task is the request for radiological diagnostics. This process is characterized by high administrative complexity and sometimes considerable time consumption. Measures that lead to an administrative relief in favor of patient care have so far been lacking. AIM OF THE STUDY: Process optimization of the request for radiological diagnostics. As a proof of concept the request for radiological diagnostics was conducted using a mobile, smartphone and tablet-based application with dedicated voice recognition software in the Department of Trauma Surgery at the University Hospital of Würzburg (UKW). MATERIAL AND METHODS: In a prospective study, time differences and efficiency of the mobile app-based method (ukw.mobile based Applicationâ¯= UMBA) compared to the PC-based method (PC-based applicationâ¯= PCBA) for requesting radiological services were analyzed. The time from the indications to the completed request and the time required to create the request on the device were documented and assessed. Due to the non-normal distribution of the data, a Mann-Whitney U test was performed. RESULTS: The time from the indications to the completed request was significantly (pâ¯< 0.05) reduced using UMBA compared to PCBA (PCBA: mean⯱ standard difference [SD] 19.57⯱ 33.24â¯min, median 3.00â¯min, interquartile range [IQR] 1.00-30.00â¯min vs. UMBA: 9.33⯱ 13.94â¯min, median 1.00â¯min, IQR 0.00-20.00â¯min). The time to complete the request on the device was also significantly reduced using UMBA (PCBA: mean⯱ SD 63.77⯱ 37.98â¯s, median 51.96â¯s, IQR 41.68-68.93â¯s vs. UMBA: 25.21⯱ 11.18â¯s, median 20.00â¯s, IQR 17.27-29.00â¯s). CONCLUSION: The mobile, voice-assisted request process leads to a considerable time reduction in daily clinical routine and illustrates the potential of user-oriented, targeted digitalization in healthcare. In future, the process will be supported by artificial intelligence.
Mobile Applications , Humans , Wounds and Injuries/diagnostic imaging , Wounds and Injuries/surgery , Germany , Prospective Studies , Computers, Handheld , Smartphone , Traumatology , Speech Recognition Software , Teleradiology/instrumentation , Teleradiology/methods , Acute Care Surgery
OBJECTIVE: The aims of our study were to analyze agreement among readers with different levels of expertise and diagnostic performance of individual and combined imaging signs for the diagnosis of adhesive capsulitis of the shoulder. METHODS: In a retrospective study, contrast-enhanced shoulder MRIs of 60 patients with and 120 without clinically diagnosed adhesive capsulitis were evaluated by three readers independently. As non-enhanced imaging signs, readers evaluated signal intensity and thickness of the axillary recess capsule, thickness of the rotator interval capsule and the coracohumeral ligament as well as obliteration of subcoracoid fat. Furthermore, contrast enhancement of axillary recess and rotator interval capsule were evaluated. Data analysis included interreader reliability, ROC analysis, and logistic regression (p < 0.05). RESULTS: Contrast-enhanced parameters showed substantially higher agreement among readers (ICC 0.79-0.80) than non-enhanced parameters (0.37-0.45). AUCs of contrast-enhanced signs (95.1-96.6%) were significantly higher (p < 0.01) than of non-enhanced imaging signs (61.5-85.9%) when considered individually. Combined evaluation of axillary recess signal intensity and thicknesses of axillary recess or rotator interval-when at least one of two signs was rated positive-increased accuracy compared to individual imaging signs, however not statistically significant. CONCLUSION: Contrast-enhanced imaging signs show both distinctly higher agreement among readers and distinctly higher diagnostic performance compared to non-enhanced imaging signs based on the imaging protocol used in this study. Combined evaluation of parameters showed a tendency to increase discrimination; however, the effect on diagnosis of ACS was not statistically significant.
Bursitis , Shoulder Joint , Humans , Shoulder , Retrospective Studies , Reproducibility of Results , Sensitivity and Specificity , Shoulder Joint/diagnostic imaging , Bursitis/diagnostic imaging , Magnetic Resonance Imaging/methods
This case report describes the interdisciplinary treatment of a complex shrapnel injury to the right femur of an 18-year-old Ukrainian soldier. This open multifragmentary fractur of the femur with a large bone defect, soft tissue damage and osteomyelitis was complicated by several multidrug-resistant bacteria, including Acinetobacter baumanii, which could not be eradicated by antibiotic treatment. Sterility was only achieved by multiple radical debridement and by negative pressure wound therapy with instillation (NPWTi) using hypochlorous acid. The femur was then reconstructed with a chimeric double-barrel fibula free flap. This report highlights the importance of multimodal antimicrobial wound treatments in an era of increasing antibiotic resistance to enable a successful und functional reconstruction of complex and infected fractures.
Fractures, Bone , Free Tissue Flaps , Negative-Pressure Wound Therapy , Humans , Adolescent , Debridement , Fractures, Bone/surgery , Lower Extremity , Anti-Bacterial Agents/therapeutic use , Treatment Outcome
INTRODUCTION: This study aimed to evaluate the utility of shear wave elastography (SWE) in assessing changes in deltoid muscle properties following reverse shoulder arthroplasty (RSA). METHODS: Our cohort consisted of 18 patients who underwent RSA due to various conditions, including osteoarthritis, cuff arthropathy, and irreducible proximal humeral fractures. Pre- and postoperative muscle elasticity and stiffness were measured using SWE and were compared with functional outcomes and radiological parameters. RESULTS: Our results showed significant changes in deltoid muscle elasticity after RSA, particularly in the anterior and middle portions. However, these alterations were not correlated with postoperative functional outcomes or specific radiological parameters. The study also underscored the potential of SWE for future applications, including the preoperative assessment of deltoid function, postoperative monitoring, and intraoperative use for optimal component positioning during RSA. CONCLUSION: Further research, involving larger, more homogeneous patient cohorts is needed to confirm these findings and to explore the potential influence of these changes on the biomechanical design of implants and prosthesis positioning in RSA.
The treatment of bone defects remains a challenging clinical problem with high reintervention rates, morbidity, and resulting significant healthcare costs. Surgical techniques are constantly evolving, but outcomes can be influenced by several parameters, including the patient's age, comorbidities, systemic disorders, the anatomical location of the defect, and the surgeon's preference and experience. The most used therapeutic modalities for the regeneration of long bone defects include distraction osteogenesis (bone transport), free vascularized fibular grafts, the Masquelet technique, allograft, and (arthroplasty with) mega-prostheses. Over the past 25 years, three-dimensional (3D) printing, a breakthrough layer-by-layer manufacturing technology that produces final parts directly from 3D model data, has taken off and transformed the treatment of bone defects by enabling personalized therapies with highly porous 3D-printed implants tailored to the patient. Therefore, to reduce the morbidities and complications associated with current treatment regimens, efforts have been made in translational research toward 3D-printed scaffolds to facilitate bone regeneration. Three-dimensional printed scaffolds should not only provide osteoconductive surfaces for cell attachment and subsequent bone formation but also provide physical support and containment of bone graft material during the regeneration process, enhancing bone ingrowth, while simultaneously, orthopaedic implants supply mechanical strength with rigid, stable external and/or internal fixation. In this perspective review, we focus on elaborating on the history of bone defect treatment methods and assessing current treatment approaches as well as recent developments, including existing evidence on the advantages and disadvantages of 3D-printed scaffolds for bone defect regeneration. Furthermore, it is evident that the regulatory framework and organization and financing of evidence-based clinical trials remains very complex, and new challenges for non-biodegradable and biodegradable 3D-printed scaffolds for bone regeneration are emerging that have not yet been sufficiently addressed, such as guideline development for specific surgical indications, clinically feasible design concepts for needed multicentre international preclinical and clinical trials, the current medico-legal status, and reimbursement. These challenges underscore the need for intensive exchange and open and honest debate among leaders in the field. This goal can be addressed in a well-planned and focused stakeholder workshop on the topic of patient-specific 3D-printed scaffolds for long bone defect regeneration, as proposed in this perspective review.
Traumatic brain injury (TBI) is the leading cause of death and disability in polytrauma and is often accompanied by concomitant injuries. We conducted a retrospective matched-pair analysis of data from a 10-year period from the multicenter database TraumaRegister DGU® to analyze the impact of a concomitant femoral fracture on the outcome of TBI patients. A total of 4508 patients with moderate to critical TBI were included and matched by severity of TBI, American Society of Anesthesiologists (ASA) risk classification, initial Glasgow Coma Scale (GCS), age, and sex. Patients who suffered combined TBI and femoral fracture showed increased mortality and worse outcome at the time of discharge, a higher chance of multi-organ failure, and a rate of neurosurgical intervention. Especially those with moderate TBI showed enhanced in-hospital mortality when presenting with a concomitant femoral fracture (p = 0.037). The choice of fracture treatment (damage control orthopedics vs. early total care) did not impact mortality. In summary, patients with combined TBI and femoral fracture have higher mortality, more in-hospital complications, an increased need for neurosurgical intervention, and inferior outcome compared to patients with TBI solely. More investigations are needed to decipher the pathophysiological consequences of a long-bone fracture on the outcome after TBI.
BACKGROUND: The best surgical management of displaced proximal humeral fractures remains a matter of considerable debate. This study presents mid-term functional outcome (median 4 years) after locking plate osteosynthesis for displaced proximal humeral fractures. METHODS: Between February 2002 and December 2014 1031 patients with 1047 displaced proximal humeral fractures were treated by open reduction and locking plate fixation with the same implant and received consecutive prospective follow up at least 24 months after surgical treatment. Clinical follow-up consisted of Constant Murley score (CS), Disabilities of the Arm, Shoulder and Hand score (DASH), and Short Form 36 questionnaire (SF-36). Complete follow-up could be performed in 557 (53.2%) cases, with a mean follow-up of 4.0 ± 2.7 years. RESULTS: Of 557 patients (67% women; mean age at time of osteosynthesis: 68.3 ± 15.5 years) absolute CS of all patients 4 ± 2.7 years after surgery was 68.4 ± 20.3 points. Normalized CS according to Katolik was 80.4 ± 23.8 points, and CS in percentage to the contralateral side (%CS) was 87.2 ± 27.9%. DASH score was at 23.8 ± 20.8 points. Osteosynthesis related complications (secondary displacement, screw cutout, avascular necrosis (n = 117 patients) were associated with lower functional scores (mean CS was 54.5 ± 19.0 p.; nCS 64.5 ± 22.9 p.;%CS 71.2 ± 25.0%; DASH score 31.9 ± 22.4 p.). The SF 36 was 66.5 points in the case cohort and a vitality mean of 69.4 points. Patients with a complication showed lower results (SF 36 56.7; vitality mean 64.9 points). CONCLUSIONS: Overall, patients following locking plate osteosynthesis of displaced proximal humeral fractures showed good to moderate outcomes four years after surgery. Mid-term functional outcomes correlate significantly with those at 1 year postoperatively. Furthermore, there is a significant negative correlation of midterm functional outcome with the occurrence of complications. LEVEL OF EVIDENCE: Level III, prospective nonconsecutive patients.
PURPOSE: Hypertrophic cartilage is an important characteristic of osteoarthritis and can often be found in patients suffering from osteoarthritis. Although the exact pathomechanism remains poorly understood, hypertrophic de-differentiation of chondrocytes also poses a major challenge in the cell-based repair of hyaline cartilage using mesenchymal stromal cells (MSCs). While different members of the transforming growth factor beta (TGF-ß) family have been shown to promote chondrogenesis in MSCs, the transition into a hypertrophic phenotype remains a problem. To further examine this topic we compared the effects of the transcription growth and differentiation factor 5 (GDF-5) and the mutant R57A on in vitro chondrogenesis in MSCs. METHODS: Bone marrow-derived MSCs (BMSCs) were placed in pellet culture and in-cubated in chondrogenic differentiation medium containing R57A, GDF-5 and TGF-ß1 for 21 days. Chondrogenesis was examined histologically, immunohistochemically, through biochemical assays and by RT-qPCR regarding the expression of chondrogenic marker genes. RESULTS: Treatment of BMSCs with R57A led to a dose dependent induction of chondrogenesis in BMSCs. Biochemical assays also showed an elevated glycosaminoglycan (GAG) content and expression of chondrogenic marker genes in corresponding pellets. While treatment with R57A led to superior chondrogenic differentiation compared to treatment with the GDF-5 wild type and similar levels compared to incubation with TGF-ß1, levels of chondrogenic hypertrophy were lower after induction with R57A and the GDF-5 wild type. CONCLUSIONS: R57A is a stronger inducer of chondrogenesis in BMSCs than the GDF-5 wild type while leading to lower levels of chondrogenic hypertrophy in comparison with TGF-ß1.
BACKGROUND: Contrary to the trend of decreasing traffic fatalities, the number of cyclists killed in Germany has been steadily increasing in recent years. With the increasing popularity of cycling in all age groups, the number of accidents with sometimes serious injuries is rising. In the course of this, the question arises what influence age has on the type and severity of injuries, the probability of survival and the length of hospital stay in seriously injured cyclists. METHODS: A retrospective analysis of data from the TraumaRegister DGU® (TR-DGU) from 2010 to 2019 was performed. All severely injured cyclists with a maximum abbreviated injury scale (MAIS) of 3+ (nâ¯= 14,651) in the TR-DGU were included in this study and the available parameters were evaluated. A subdivision into three age groups (60-69, 70-79, and ≥â¯80 years) and a control group (20-59 years) was carried out. RESULTS: Injuries to the head were by far the most common, accounting for 64.2%. There was a marked increase in severe head injuries in the 60-plus years age group. Furthermore, with increasing age, the probability of prehospital intubation, catecholamine requirement, intensive care and hospital length of stay, and mortality increased. CONCLUSION: Head injuries represent the most common serious injury, especially among older cyclists. As helmet wearing was not recorded in the TraumaRegister DGU® during the evaluation period, no conclusion can be drawn about its effect. Furthermore, a higher age correlates with a longer hospital stay and a higher mortality, but does not represent an independent risk factor for death in severely injured patients.
Craniocerebral Trauma , Multiple Trauma , Humans , Aged, 80 and over , Cross-Sectional Studies , Multiple Trauma/epidemiology , Retrospective Studies , Registries
BACKGROUND: Various studies have shown the benefit of three-dimensional (3D) computed tomography (CT) reconstruction and especially 3D printing in the treatment of tibial plateau fractures (TPFs). This study aimed to investigate whether mixed-reality visualization (MRV) using mixed-reality glasses can provide a benefit for CT and/or 3D printing in planning treatment strategies for complex TPFs. METHODS: Three complex TPFs were selected for the study and processed for 3D imaging. Subsequently, the fractures were presented to specialists in trauma surgery using CT (including 3D CT reconstruction), MRV (hardware: Microsoft HoloLens 2; software: mediCAD MIXED REALITY) and 3D prints. A standardized questionnaire on fracture morphology and treatment strategy was completed after each imaging session. RESULTS: 23 surgeons from 7 hospitals were interviewed. A total of 69.6% (n = 16) of those had treated at least 50 TPFs. A change in fracture classification according to Schatzker was recorded in 7.1% of the cases and in 78.6% an adjustment of the ten-segment classification was observed after MRV. In addition, the intended patient positioning changed in 16.1% of the cases, the surgical approach in 33.9% and osteosynthesis in 39.3%. A total of 82.1% of the participants rated MRV as beneficial compared to CT regarding fracture morphology and treatment planning. An additional benefit of 3D printing was reported in 57.1% of the cases (five-point Likert scale). CONCLUSIONS: Preoperative MRV of complex TPFs leads to improved fracture understanding, better treatment strategies and a higher detection rate of fractures in posterior segments, and it thus has the potential to improve patient care and outcomes.
The administrative burden for physicians in the hospital can affect the quality of patient care. The Service Center Medical Informatics (SMI) of the University Hospital Würzburg developed and implemented the smartphone-based mobile application (MA) ukw.mobile1 that uses speech recognition for the point-of-care ordering of radiological examinations. The aim of this study was to examine the usability of the MA workflow for the point-of-care ordering of radiological examinations. All physicians at the Department of Trauma and Plastic Surgery at the University Hospital Würzburg, Germany, were asked to participate in a survey including the short version of the User Experience Questionnaire (UEQ-S) and the Unified Theory of Acceptance and Use of Technology (UTAUT). For the analysis of the different domains of user experience (overall attractiveness, pragmatic quality and hedonic quality), we used a two-sided dependent sample t-test. For the determinants of the acceptance model, we employed regression analysis. Twenty-one of 30 physicians (mean age 34 ± 8 years, 62% male) completed the questionnaire. Compared to the conventional desktop application (DA) workflow, the new MA workflow showed superior overall attractiveness (mean difference 2.15 ± 1.33), pragmatic quality (mean difference 1.90 ± 1.16), and hedonic quality (mean difference 2.41 ± 1.62; all p < .001). The user acceptance measured by the UTAUT (mean 4.49 ± 0.41; min. 1, max. 5) was also high. Performance expectancy (beta = 0.57, p = .02) and effort expectancy (beta = 0.36, p = .04) were identified as predictors of acceptance, the full predictive model explained 65.4% of its variance. Point-of-care mHealth solutions using innovative technology such as speech-recognition seem to address the users' needs and to offer higher usability in comparison to conventional technology. Implementation of user-centered mHealth innovations might therefore help to facilitate physicians' daily work.
Speech Perception , Telemedicine , Humans , Male , Adult , Female , Point-of-Care Systems , Speech , Point-of-Care Testing
BACKGROUND: Traumatic separation of the pubic symphysis can destabilize the pelvis and require surgical fixation to reduce symphyseal gapping. The traditional approach involves open reduction and the implantation of a steel symphyseal plate (SP) on the pubic bone to hold the reposition. Despite its widespread use, SP-fixation is often associated with implant failure caused by screw loosening or breakage. METHODS: To address the need for a more reliable surgical intervention, we developed and tested two titanium cable-clamp implants. The cable served as tensioning device while the clamp secured the cable to the bone. The first implant design included a steel cable anterior to the pubic symphysis to simplify its placement outside the pelvis, and the second design included a cable encircling the pubic symphysis to stabilize the anterior pelvic ring. Using highly reproducible synthetic bone models and a limited number of cadaver specimens, we performed a comprehensive biomechanical study of implant stability and evaluated surgical feasibility. RESULTS: We were able to demonstrate that the cable-clamp implants provide stability equivalent to that of a traditional SP-fixation but without the same risks of implant failure. We also provide detailed ex vivo evaluations of the safety and feasibility of a trans-obturator surgical approach required for those kind of fixation. CONCLUSION: We propose that the developed cable-clamp fixation devices may be of clinical value in treating pubic symphysis separation.
Life-threatening pelvic injuries are often associated with disruption of a joint within the hip bones, called the pubic symphysis. Disruption can lead to a gap and subsequent instability of the pelvis. The current treatment is to stabilize the joint with a steel plate and screws, however this often becomes unstable soon after the operation. In this study, we analyzed two alternatives for stabilization that use cables and clamps instead of the plate. Further, we tested a surgical approach for implantation. The cables and clamps were as stable as a steel plate so offer an alternative approach to stabilize the pubic symphysis.
Background: Despite its fair-to-moderate reliability, the "modified Neer classification" is widely accepted and used. The purpose of this study was to reevaluate its applicability. Methods: Of n = 59 patients with distal clavicle fractures, fractures were classified on standard radiographs. Afterwards, an MRI examination was performed, and fractures reclassified. The primary outcome parameter was quantifying the rate of misclassification. The secondary outcome parameters were the evaluation of the ligamentous injury constellations. Results: In all cases, the fracture course and ligamental integrity could be assigned to the fracture type. Correction of the classification was necessary in n = 5 (8.5%) cases. In n = 3 (5%) cases, a correction was necessary from Neer I to Craig IIc and thus from conservative to operative treatment. Mean coracoclavicular distance (CCD) in Neer I was 10.2 ± 2.1 mm versus 14.2 ± 3.9 mm in Craig IIc (p = 0.02). The mean fracture angle in Neer I was 25.1 ± 3.3° versus 36.8 ± 4.4° in Craig IIc (p = 0.02). Conclusion: Cross-sectional imaging resulted in higher precision. Nevertheless, recommendations remain for standard radiographs. The CCD and fracture angle should be considered. An angle of >30° can be assumed as a parameter of instability. A previously undescribed fracture type does not seem to exist. The modified Neer classification is an appropriate and complete fracture classification.
BACKGROUND: Avascular necrosis of the humeral head after proximal humeral fracture i.e. type 1 fracture sequelae (FS) according to the Boileau classification is a rare, often painful condition and treatment still remains a challenge. This study evaluates the treatment of FS type 1 with anatomic and reverse shoulder arthroplasty and a new subclassification is proposed. METHODS: This single-center, retrospective, comparative study, included all consecutive patients with a proximal humeral FS type 1 treated surgically in a four-year period. All patients were classified according to the proposed 3 different subtypes. Constant score (CS), Quick DASH score, subjective shoulder value (SSV) as well as revision and complication rate were analyzed. In the preoperative radiographs the acromio-humeral interval (AHI) and greater tuberosity resorption were examined. RESULTS: Of 27 with a FS type 1, 17 patients (63%) with a mean age of 64 ± 11 years were available for follow-up at 24 ± 10 months. 7 patients were treated with anatomic and 10 with reverse shoulder arthroplasty. CS improved significantly from 16 ± 7 points to 61 ± 19 points (p < 0.0001). At final follow-up the mean Quick DASH Score was 21 ± 21 and the mean SSV was 73 ± 21 points. The mean preoperative AHI was 9 ± 3 mm, however, 8 cases presented an AHI < 7 mm. 4 cases had complete greater tuberosity resorption. The complication and revision rate was 19%; implant survival was 88%. CONCLUSION: By using the adequate surgical technique good clinical short-term results with a relatively low complication rate can be achieved in FS type 1. The Boileau classification should be extended for fracture sequelae type 1 and the general recommendation for treatment with hemiarthroplasty or total shoulder arthroplasty has to be relativized. Special attention should be paid to a decreased AHI and/or resorption of the greater tuberosity as indirect signs for dysfunction of the rotator cuff. To facilitate the choice of the adequate prosthetic treatment method the suggested subclassification system should be applied.
Hemiarthroplasty , Osteonecrosis , Shoulder Fractures , Aged , Hemiarthroplasty/adverse effects , Hemiarthroplasty/methods , Humans , Humeral Head/diagnostic imaging , Humeral Head/surgery , Middle Aged , Osteonecrosis/complications , Osteonecrosis/diagnostic imaging , Osteonecrosis/surgery , Retrospective Studies , Shoulder Fractures/complications , Shoulder Fractures/diagnostic imaging , Shoulder Fractures/surgery
BACKGROUND: Morphology and glenoid involvement determine the necessity of surgical management in scapula fractures. While being present in only a small share of patients with shoulder trauma, numerous classification systems have been in use over the years for categorization of scapula fractures. The purpose of this study was to evaluate the established AO/OTA classification in comparison to the classification system of Euler and Rüedi (ER) with regard to interobserver reliability and confidence in clinical practice. METHODS: Based on CT imaging, 149 patients with scapula fractures were retrospectively categorized by two trauma surgeons and two radiologists using the classification systems of ER and AO/OTA. To measure the interrater reliability, Fleiss kappa (κ) was calculated independently for both fracture classifications. Rater confidence was stated subjectively on a five-point scale and compared with Wilcoxon signed rank tests. Additionally, we computed the intraclass correlation coefficient (ICC) based on absolute agreement in a two-way random effects model to assess the diagnostic confidence agreement between observers. RESULTS: In scapula fractures involving the glenoid fossa, interrater reliability was substantial (κ = 0.722; 95% confidence interval [CI] 0.676-0.769) for the AO/OTA classification in contrast to moderate agreement (κ = 0.579; 95% CI 0.525-0.634) for the ER classification system. Diagnostic confidence for intra-articular fracture patterns was superior using the AO/OTA classification compared to ER (p < 0.001) with higher confidence agreement (ICC: 0.882 versus 0.831). For extra-articular fractures, ER (κ = 0.817; 95% CI 0.771-0.863) provided better interrater reliability compared to AO/OTA (κ = 0.734; 95% CI 0.692-0.776) with higher diagnostic confidence (p < 0.001) and superior agreement between confidence ratings (ICC: 0.881 versus 0.912). CONCLUSIONS: The AO/OTA classification is most suitable to categorize intra-articular scapula fractures with glenoid involvement, whereas the classification system of Euler and Rüedi appears to be superior in extra-articular injury patterns with fractures involving only the scapula body, spine, acromion and coracoid process.
Shoulder Fractures , Humans , Observer Variation , Reproducibility of Results , Retrospective Studies , Scapula/diagnostic imaging
INTRODUCTION: Reverse shoulder arthroplasty (RSA) leads to medialization and distalization of the centre of rotation of the shoulder joint resulting in lengthening of the deltoid muscle. Shear wave ultrasound elastography (SWE) is a reliable method for quantifying tissue stiffness. The purpose of this study was to analyse if deltoid muscle tension after RSA correlates with the patients' pain level. We hypothesized that higher deltoid muscle tension would be associated with increased pain. MATERIAL AND METHODS: Eighteen patients treated with RSA were included. Constant score (CS) and pain level on the visual analogue scale (VAS) were analysed and SWE was performed on both shoulders. All three regions of the deltoid muscle were examined in resting position and under standardized isometric loading. RESULTS: Average patient age was 76 (range 64-84) years and average follow-up was 15 months (range 4-48). The average CS was 66 points (range 35-89) and the average pain level on the VAS was 1.8 (range 0.5-4.7). SWE revealed statistically significant higher muscle tension in the anterior and middle deltoid muscle region in patients after RSA compared to the contralateral non-operated side. There was a statistically significant correlation between pain level and anterior deltoid muscle tension. CONCLUSION: SWE revealed increased tension in the anterior and middle portion of the deltoid muscle after RSA in a clinical setting. Increased tension of the anterior deltoid muscle portion significantly correlated with an increased pain level. SWE is a powerful, cost-effective, quick, dynamic, non-invasive, and radiation-free imaging technique to evaluate tissue elasticity in the shoulder with a wide range of applications. LEVEL OF EVIDENCE: Diagnostic study, Level III.
Arthroplasty, Replacement, Shoulder , Elasticity Imaging Techniques , Shoulder Joint , Arthroplasty, Replacement, Shoulder/adverse effects , Child , Child, Preschool , Deltoid Muscle/diagnostic imaging , Deltoid Muscle/surgery , Humans , Muscle Tonus , Pain , Range of Motion, Articular , Shoulder/diagnostic imaging , Shoulder Joint/diagnostic imaging , Shoulder Joint/surgery
PURPOSE: The Coronavirus Disease 2019 (COVID-19) may result not only in acute symptoms such as severe pneumonia, but also in persisting symptoms after months. Here we present a 1 year follow-up of a patient with a secondary tension pneumothorax due to COVID-19 pneumonia. CASE PRESENTATION: In May 2020, a 47-year-old male was admitted to the emergency department with fever, dry cough, and sore throat as well as acute chest pain and shortness of breath. Sputum testing (polymerase chain reaction, PCR) and computed tomography (CT) confirmed infection with the severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2). Eleven days after discharge, the patient returned to the emergency department with pronounced dyspnoea after coughing. CT showed a right-sided tension pneumothorax, which was relieved by a chest drain (Buelau) via mini open thoracotomy. For a period of 3 months following resolution of the pneumothorax the patient complained of fatigue with mild joint pain and dyspnoea. After 1 year, the patient did not suffer from any persisting symptoms. The pulmonary function and blood parameters were normal, with the exception of slightly increased levels of D-Dimer. The CT scan revealed only discrete ground glass opacities (GGO) and subpleural linear opacities. CONCLUSION: Tension pneumothorax is a rare, severe complication of a SARS-CoV-2 infection but may resolve after treatment without negative long-term sequelae. LEVEL OF EVIDENCE: V.
COVID-19 , Pneumothorax , COVID-19/complications , Chest Tubes/adverse effects , Follow-Up Studies , Humans , Male , Middle Aged , Pneumothorax/diagnosis , Pneumothorax/etiology , Pneumothorax/therapy , SARS-CoV-2
BACKGROUND: Locked dislocations of the glenohumeral joint are disabling and often painful conditions and the treatment is challenging. This study evaluates the functional outcome and the different prosthetic treatment options for chronic locked dislocations of the glenohumeral joint and a subclassification is proposed. METHODS: In this single-center retrospective case series, all patients with a chronic locked dislocation treated surgically during a four-year period were analyzed. Constant score (CS), Quick Disabilities of Shoulder and Hand Score (DASH), patient satisfaction (subjective shoulder value (SSV)), revision rate and glenoid notching were analyzed. RESULTS: 26 patients presented a chronic locked dislocation of the glenohumeral joint. 16 patients (62%) with a mean age of 75 [61-83] years were available for follow-up at 24 ± 18 months. CS improved significantly from 10 ± 6 points to 58 ± 21 points (p < 0.0001). At the final follow-up, the mean DASH was 27 ± 23 and the mean SSV was 58 ± 23 points. The complication rate was 19% and the revision rate was 6%; implant survival was 94%. Scapular notching occurred in 2 (13%) cases (all grade 1). CONCLUSION: With good preoperative planning and by using the adequate surgical technique, good clinical short-term results with a low revision rate can be achieved. The authors suggest extending the Boileau classification for fracture sequelae type 2 and recommend using a modified classification to facilitate the choice of treatment as the suggested classification system includes locked posterior and anterior dislocations with and without glenoid bone loss. LEVEL OF EVIDENCE: IV.
Arthroplasty, Replacement, Shoulder , Fracture Dislocation , Shoulder Joint , Aged , Arthroplasty, Replacement, Shoulder/methods , Fracture Dislocation/surgery , Humans , Humerus/surgery , Range of Motion, Articular , Retrospective Studies , Shoulder/surgery , Shoulder Joint/surgery , Treatment Outcome
Operative treatment of ruptured pubic symphysis by plating is often accompanied by complications. Trans-obturator cable fixation might be a more reliable technique; however, have not yet been tested for stabilization of ruptured pubic symphysis. This study compares symphyseal trans-obturator cable fixation versus plating through biomechanical testing and evaluates safety in a cadaver experiment. APC type II injuries were generated in synthetic pelvic models and subsequently separated into three different groups. The anterior pelvic ring was fixed using a four-hole steel plate in Group A, a stainless steel cable in Group B, and a titan band in Group C. Biomechanical testing was conducted by a single-leg-stance model using a material testing machine under physiological load levels. A cadaver study was carried out to analyze the trans-obturator surgical approach. Peak-to-peak displacement, total displacement, plastic deformation and stiffness revealed a tendency for higher stability for trans-obturator cable/band fixation but no statistical difference to plating was detected. The cadaver study revealed a safe zone for cable passage with sufficient distance to the obturator canal. Trans-obturator cable fixation has the potential to become an alternative for symphyseal fixation with less complications.
Bone Plates , Fracture Fixation, Internal , Fractures, Bone/surgery , Pelvic Bones , Pubic Symphysis , Humans , Pelvic Bones/injuries , Pelvic Bones/surgery , Pubic Symphysis/injuries , Pubic Symphysis/surgery
Amputation after open tibial fracture occurs in 3% of cases. The rate increases when flap reconstruction is required. The standard care involves microsurgical tissue transfer although the pedicled reverse sural artery adipofascial flap (PRSAF) is a local alternative in patients endangered by a prolonged operative time. Incorporation of a gastrocnemius muscle cuff in this flap can be used to fill dead space and increase healing potential. Literature shows superior survival rates for both PRSAF and inclusion of a muscle cuff in comparison with the cutaneous version. The aim of the study was to compare the outcome of the PRSAF and the musculoadipofascial version (PRSMAF). We hypothesize that the PRSMAF provides similar lap viability and flap-related complication rates as does the adipofascial version. The muscle component may reduce the long-term osteomyelitis rate. METHODS: Patients were evaluated retrospectively after reconstruction with either PRSAF or PRSMAF. Preoperative osteomyelitis, flap survival, complications and osteomyelitis clearance were analyzed. RESULTS: The study shows preliminary results supporting the potential use of the PRSMAF. We compare either 23 PRSMAF or 20 PRSAF flaps. We found no statistically significant differences in flap survival or in complication rate. CONCLUSIONS: Although the anatomical situation may sometimes dictate the use of a free flap, a technically less-complicated option may in some cases offer a viable alternative. This study shows that the PRSMAF can serve as an alternative for complex bone defects in the limb, though it does not provide statistical improvement to the PRSAF.
