Supported Biomembrane Systems Incorporating Multiarm Polymers and Bioorthogonal Tethering.

To functionalize interfaces with supported biomembranes and membrane proteins, the challenge is to build stabilized and supported systems that mimic the native lipid microenvironment. Our objective is to control substrate-to-biomembrane spacing and the tethering chemistry so proteoliposomes can be fused and conjugated without perturbation of membrane protein function. Furthermore, the substrates need to exhibit low protein and antibody nonspecific binding to use these systems in assays. We have employed protein orthogonal coupling schemes in concert with multiarm poly(ethylene glycol) (PEG) technology to build supported biomembranes on microspheres. The lipid bilayer structures and tailored substrates of the microsphere-supported biomembranes were analyzed via flow cytometry, confocal fluorescence, and super-resolution imaging microscopy, and the lateral fluidity was quantified using fluorescence recovery after photobleaching (FRAP) techniques. Under these conditions, the 4-arm-PEG20,000-NH2 based configuration gave the most desirable tethering system based on lateral diffusivity and coverage.

Fluorescent azobenzene-confined coiled-coil mesofibers.

Fluorescent protein biomaterials have important applications such as bioimaging in pharmacological studies. Self-assembly of proteins, especially into fibrils, is known to produce fluorescence in the blue band. Capable of self-assembly into nanofibers, we have shown we can modulate its aggregation into mesofibers by encapsulation of a small hydrophobic molecule. Conversely, azobenzenes are hydrophobic small molecules that are virtually non-fluorescent in solution due to their highly efficient photoisomerization. However, they demonstrate fluorogenic properties upon confinement in nanoscale assemblies by reducing the non-radiative photoisomerization. Here, we report the fluorescence of a hybrid protein-small molecule system in which azobenzene is confined in our protein assembly leading to fiber thickening and increased fluorescence. We show our engineered protein Q encapsulates AzoCholine, bearing a photoswitchable azobenzene moiety, in the hydrophobic pore to produce fluorescent mesofibers. This study further investigates the photocontrol of protein conformation as well as fluorescence of an azobenze-containing biomaterial.

Prediction of improved therapeutics for fabry disease patients generated by mutagenesis of the α-galactosidase A active site, dimer interface, and glycosylation region.

Fabry disease is an X-linked lysosomal storage disorder caused by the deficiency of the enzyme, α-galactosidase A that induces the accumulation of the substrate globotriaosylceramide. Currently approved enzyme replacement therapy using recombinant human α-galactosidase A improves patient symptoms but a majority of patients experience adverse events due to the multiple infusions required for full therapeutic efficacy. Our approach is to use medicinal chemistry and phylogenic comparisons to introduce mutations into the human enzyme to increase catalytic activity and/or stability to generate an improved therapeutic enzyme that may require fewer infusions. We designed mutations at three regions of the human α-galactosidase A: the active site, the dimer interface, and a site for glycosylation. The M208E mutation, adjacent to the Y207 active site residue, increased enzyme activity 3.01-fold. This mutation introduced a charged Glu residue that is adjacent to the Y207 active site residue and close to a site of N-glycosylation. The W277C mutation, designed to promote dimer stability, introduced a strong thiol-aromatic interaction (Cys-Phe) at the dimer interface and increased activity 2.31-fold. The W277C and M208E mutations modify the structure of the enzyme into forms with enhanced thermal stability 3.7- and 3.9-fold, respectively and positive cooperativity resulting in increased Hill coefficient from 1.0 to 4.60 and 3.47, respectively. Enhanced thermal stability and positive cooperativity predict improved in vivo activity and superior therapeutic properties. Our results demonstrate the value of in vitro mutagenesis for α-galactosidase A and support future perspectives to validate these results in Fabry disease patients.

γ-Secretase Partitioning into Lipid Bilayers Remodels Membrane Microdomains after Direct Insertion.

γ-Secretase is a multisubunit complex that catalyzes intramembranous cleavage of transmembrane proteins. The lipid environment forms membrane microdomains that serve as spatio-temporal platforms for proteins to function properly. Despite substantial advances in the regulation of γ-secretase, the effect of the local membrane lipid microenvironment on the regulation of γ-secretase is poorly understood. Here, we characterized and quantified the partitioning of γ-secretase and its substrates, the amyloid precursor protein (APP) and Notch, into lipid bilayers using solid-supported model membranes. Notch substrate is preferentially localized in the liquid-disordered (Ld) lipid domains, whereas APP and γ-secretase partition as single or higher complex in both phases but highly favor the ordered phase, especially after recruiting lipids from the ordered phase, indicating that the activity and specificity of γ-secretase against these two substrates are modulated by membrane lateral organization. Moreover, time-elapse measurements reveal that γ-secretase can recruit specific membrane components from the cholesterol-rich Lo phase and thus creates a favorable lipid environment for substrate recognition and therefore activity. This work offers insight into how γ-secretase and lipid modulate each other and control its activity and specificity.

Apoptosis detection via automated algorithms to analyze biomarker translocation in reporter cells.

Rapid, efficient, and robust quantitative analyses of dynamic apoptotic events are essential in a high-throughput screening workflow. Currently used methods have several bottlenecks, specifically, limitations in available fluorophores for downstream assays and misinterpretation of statistical image data analysis. In this study, we developed cytochrome-C (Cyt-C) and caspase-3/-8 reporter cell lines using lung (PC9) and breast (T47D) cancer cells, and characterized them from the response to apoptotic stimuli. In these two reporter cell lines, the spatial fluorescent signal translocation patterns served as reporters of activations of apoptotic events, such as Cyt-C release and caspase-3/-8 activation. We also developed a vision-based, tunable, automated algorithm in MATLAB to implement the robust and accurate analysis of signal translocation in single or multiple cells. Construction of the reporter cell lines allows live monitoring of apoptotic events without the need for any other dyes or fixatives. Our algorithmic implementation forgoes the use of simple image statistics for more robust analytics. Our optimized algorithm can achieve a precision greater than 90% and a sensitivity higher than 85%. Combining our automated algorithm with reporter cells bearing a single-color dye/fluorophore, we expect our approach to become an integral component in the high-throughput drug screening workflow.

Phase Composition Control in Microsphere-Supported Biomembrane Systems.

The popularization of studies in membrane protein lipid phase coexistence has prompted the development of new techniques to construct and study biomimetic systems with cholesterol-rich lipid microdomains. Here, microsphere-supported biomembranes with integrated α-helical peptides, referred to as proteolipobeads (PLBs), were used to model peptide/protein partitioning within DOPC/DPPC/cholesterol phase-separated membranes. Due to the appearance of compositional heterogeneity and impurities in the formation of model PLB assemblies, fluorescence-activated cell sorting (FACS) was used to characterize and sort PLB populations on the basis of disordered phase (Ld) content. In addition, spectral imaging was used to assess the partitioning of FITC-labeled α-helical peptide between fluorescently labeled Ld phase and unlabeled ordered phase (Lo) phase lipid microdomains. The apparent peptide partition coefficient, Kp,app, was measured to be 0.89 ± 0.06, indicating a slight preference of the peptide for the Lo phase. A biomimetic motif of the Lo phase concentration enhancement of the biotinyl-peptide ligand display in proteolipobeads was also observed. Finally, peptide mobility was measured by FRAP separately in each lipid phase, yielding diffusivities of 0.036 ± 0.005 and 0.014 ± 0.003 µm2/s in the Ld and Lo phases, respectively.

Biodegradable, Tethered Lipid Bilayer-Microsphere Systems with Membrane-Integrated α-Helical Peptide Anchors.

Supported lipid bilayers (SLBs) are ideally suited for the study of biomembrane-biomembrane interactions and for the biomimicry of cell-to-cell communication, allowing for surface ligand displays that contain laterally mobile elements. However, the SLB paradigm does not include three-dimensionality and biocompatibility. As a way to bypass these limitations, we have developed a biodegradable form of microsphere SLBs, also known as proteolipobeads (PLBs), using PLGA microspheres. Microspheres were synthesized using solvent evaporation and size selected with fluorescence activated cell sorting (FACS). Biomembranes were covalently tethered upon fusion to microsphere supports via short-chain PEG spacers connecting membrane-integrated α-helical peptides and the microsphere surface, affecting membrane diffusivity and mobility as indicated by confocal FRAP analysis. Membrane heterogeneities, which are attributed to PLGA hydrophobicity and rough surface topography, are curtailed by the addition of PEG tethers. This method allows for the presentation of tethered, laterally mobile biomembranes in three dimensions with functionally embedded attachment peptides for mobile ligand displays.

Lower crosslinking density enhances functional nucleus pulposus-like matrix elaboration by human mesenchymal stem cells in carboxymethylcellulose hydrogels.

Engineered constructs represent a promising treatment for replacement of nucleus pulposus (NP) tissue. Recently, photocrosslinked hydrogels comprised of methacrylated carboxymethylcellulose (CMC) were shown to support chondrogenic differentiation of encapsulated human mesenchymal stem cells (hMSCs) and promote accumulation of NP-like extracellular matrix (ECM). The objective of this study was to investigate the influence of CMC crosslinking density, by varying macromer concentration and modification (i.e., methacrylation) percentage, on NP-like differentiation of encapsulated hMSCs. Constructs of lower macromer concentration (2%, w/v) exhibited significantly greater collagen II accumulation, more homogeneous distribution of ECM macromolecules, and a temporal increase in mechanical properties compared to hydrogels of higher macromer concentration (4%, w/v). Constructs of higher modification percentage (25%) gave rise to significantly elevated collagen II content and the formation of cell clusters within the matrix relative to samples of lower modification percentage (10% and 15%). These differences in functional ECM accumulation and distribution are likely attributed to the distinct crosslinked network structures of the various hydrogel formulations. Overall, CMC constructs of lower macromer concentration and modification percentage were most promising as scaffolds for NP tissue engineering based on functional ECM assembly. Optimization of such hydrogel fabrication parameters may lead to the development of clinically relevant tissue-engineered NP replacements.

Imaging and Functional Analysis of γ-Secretase and Substrate in a Proteolipobead System with an Activity-Based Probe.

Investigation of intramembranal protease catalysis demands the generation of intact biomembrane assemblies with structural integrity and lateral mobility. Here, we report the development of a microsphere supported-biomembrane platform enabling characterization of γ-secretase and substrate within proteolipobead assemblies via microscopy and flow cytometry. The active enzyme loading levels were tracked using an activity-based probe, with the biomembranes delineated by carbocyanine lipid reporters. Proteolipobeads formed from HeLa proteoliposomes gave rise to homogeneous distributions of active γ-secretase within supported biomembranes with native-like fluidity. The substrate loading into supported biomembranes was detergent-dependent, as evidenced by even colocalization of substrate and lipid tracers in confocal 3D imaging of individual proteolipobeads. Moreover, the loading level was tunable with bulk substrate concentration. γ-Secretase substrate cleavage and its inhibition within γ-secretase proteolipobeads were observed. This platform offers a means to visualize enzyme and substrate loading, activity, and inhibition in a controllable biomembrane microenvironment.

Engineered coiled-coil protein microfibers.

The fabrication of de novo proteins able to self-assemble on the nano- to meso-length scales is critical in the development of protein-based biomaterials in nanotechnology and medicine. Here we report the design and characterization of a protein engineered coiled-coil that not only assembles into microfibers, but also can bind hydrophobic small molecules. Under ambient conditions, the protein forms fibers with nanoscale structure possessing large aspect ratios formed by bundles of α-helical homopentameric assemblies, which further assemble into mesoscale fibers in the presence of curcumin through aggregation. Surprisingly, these biosynthesized fibers are able to form in conditions of remarkably low concentrations. Unlike previously designed coiled-coil fibers, these engineered protein microfibers can bind the small molecule curcumin throughout the assembly, serving as a depot for encapsulation and delivery of other chemical agents within protein-based 3D microenvironments.

A lipobead microarray assembled by particle entrapment in a microfluidic obstacle course and used for the display of cell membrane receptors.

Platforms which can display cell membrane ligands and receptors as a microarray library of probes for screening against a target are essential tools in drug discovery, biomarker identification, and pathogen detection. Membrane receptors and ligands require their native bilayer environment to retain their selectivity and binding affinity, and this complicates displaying them in a microarray platform. In this study, a design is developed in which the probes are first incorporated in supported lipid bilayers formed around micron-sized particles (lipobeads), and the microbeads themselves are then arrayed on a surface by hydrodynamic capture in a microfluidic obstacle course of traps. The traps are "V" shaped open enclosures, which are arranged in a wide channel of a microfluidic device, and capture the lipobeads (slightly smaller than the channel height) as they are streamed through the course. Screening assays are undertaken directly in the device after assembly, by streaming a fluorescently labeled target through the device and detecting the bead fluorescence. Conditions are first established for which the supported bilayers on the bead surface remain intact during the capture and assay steps, using fluorescent tags in the bilayer to infer bilayer integrity. Numerical calculations of the hydrodynamic drag coefficient on the entrapped beads are presented in conjunction with the stability experiments to develop criteria for the bilayer stability as a function of the screening assay perfusion rate. Simulations of the flow streamlines are also presented to quantify the trapping efficiency of the obstacle course. Screening assays are illustrated, assaying fluorescently labeled NeutrAvidin with biotin, and labeled cholera toxin with its ganglioside binding ligand, GM1. Sequential capturing of sets of lipobeads (one at a time, and with each set bearing a different probe), followed by indexing the bead positions after each set is entrapped, allows for the construction of an indexed array of multiple probes without the need for particle encoding and is illustrated using the NeutrAvidin-biotin pair. Finally, the lipobead platform is used for quantitatively measuring the kinetic rate constants for the binding of a probe (biotin) to a target (NeutrAvidin).

A novel high throughput 1536-well Notch1 γ -secretase AlphaLISA assay.

The Notch pathway plays a crucial role in cell fate decisions through controlling various cellular processes. Overactive Notch signal contributes to cancer development from leukemias to solid tumors. γ-Secretase is an intramembrane protease responsible for the final proteolytic step of Notch that releases the membrane-tethered Notch fragment for signaling. Therefore, γ-secretase is an attractive drug target in treating Notch-mediated cancers. However, the absence of high throughput γ-secretase assay using Notch substrate has limited the identification and development of γ- secretase inhibitors that specifically target the Notch signaling pathway. Here, we report on the development of a 1536- well γ-secretase assay using a biotinylated recombinant Notch1 substrate. We effectively assimilated and miniaturized this newly developed Notch1 substrate with the AlphaLISA detection technology and demonstrated its robustness with a calculated Z' score of 0.66. We further validated this optimized assay by performing a pilot screening against a chemical library consisting of ~5,600 chemicals and identified known γ-secretase inhibitors e.g. DAPT, and Calpeptin; as well as a novel γ-secretase inhibitor referred to as KD-I-085. This assay is the first reported 1536-well AlphaLISA format and represents a novel high throughput Notch1-γ-secretase assay, which provides an unprecedented opportunity to discover Notch-selective γ-secretase inhibitors that can be potentially used for the treatment of cancer and other human disorders.

Tether-supported biomembranes with α-helical peptide-based anchoring constructs.

The strict requirement of constructing a native lipid environment to preserve the structure and functionality of membrane proteins is the starting constraint when building biomaterials and sensor systems from these biomolecules. To enhance the viability of supported biomembranes systems and build new ligand display interfaces, we apply rationally designed peptides partitioned into the lipid bilayer interface. Peptides designed to form membrane-spanning α-helical anchoring domains are synthesized using solid-phase peptide synthesis. K(3)A(4)L(2)A(7)L(2)A(3)K(2)-FITC is synthesized on the 100 mg scale for use as a biomembrane anchoring molecule, where orthogonal side-chain modifications allow us to introduce probes enabling peptide localization within supported bilayers. The peptides are found to form α-helical domains within liposomes as assessed with circular dichroism spectroscopy. These peptides are designed to be incorporated into lipid bilayers supported by microspheres and serve as biomembrane anchoring moieties to amino-terminated surfaces. Here, the silica bead surface (4.7 µm diameter) is activated with homobifunctional NHS-PEG(3000)-NHS as "polymer cushion" spacers. This tethering to a subset of the K(3)A(4)L(2)A(7)L(2)A(3)K(2)-FITC molecules present in the bilayer is achieved by the fusion of liposomes followed by coupling of the peptide amino groups to the NHS presented from the silica microsphere surfaces. The biomembrane distributions of tethered and untethered K(3)A(4)L(2)A(7)L(2)A(3)K(2)-FITC are probed with confocal microscopy and are found to give 3D reconstructions consistent with largely homogeneous supported biomembranes. The fluidity of the untethered fraction of peptides within supported membranes is quantified using the fluorescence recovery after photobleaching (FRAP) technique. The presence of the PEG(3000) polymer cushion facilitated a 28.9% increase in peptide diffusivity over untethered bilayers at the lowest peptide to lipid ratio we examined. We show that rationally designed peptide-based anchors can be used to tether lipid bilayers, creating a polymer-cushioned lipid microenvironment on surfaces with high lateral mobility and facilitating the development of a new platform for ligand displays.

Activation and intrinsic gamma-secretase activity of presenilin 1.

A complex composed of presenilin (PS), nicastrin, PEN-2, and APH-1 is absolutely required for γ-secretase activity in vivo. Evidence has emerged to suggest a role for PS as the catalytic subunit of γ-secretase, but it has not been established that PS is catalytically active in the absence of associated subunits. We now report that bacterially synthesized, recombinant PS (rPS) reconstituted into liposomes exhibits γ-secretase activity. Moreover, an rPS mutant that lacks a catalytic aspartate residue neither exhibits reconstituted γ-secretase activity nor interacts with a transition-state γ-secretase inhibitor. Importantly, we demonstrate that rPS harboring mutations that cause early onset familial Alzheimer's disease (FAD) lead to elevations in the ratio of Aß42 to Aß40 peptides produced from a wild-type APP substrate and that rPS enhances the Aß42/Aß40 peptide ratio from FAD-linked mutant APP substrates, findings that are entirely consistent with the results obtained in in vivo settings. Thus, γ-secretase cleavage specificity is an inherent property of the polypeptide. Finally, we demonstrate that PEN2 is sufficient to promote the endoproteolysis of PS1 to generate the active form of γ-secretase. Thus, we conclusively establish that activated PS is catalytically competent and the bimolecular interaction of PS1 and PEN2 can convert the PS1 zymogen to an active protease.

Liposome delivery of quantum dots to the cytosol of live cells.

An increasing number of studies have demonstrated the multiple advantages of using nanocrystals, such as Quantum dots, for biological imaging. Quantum dots functionalized with biomolecules on their surfaces were shown to be able to bind to specific extracellular targets via specific recognition and to be internalized inside the cells, thereby allowing the imaging of intracellular pathways. However, the use of Quantum dots for live tracking of intracellular molecules is relatively limited because of the difficulties encountered during the induction of Quantum dots across living cell membranes. In this study we show that cationic liposomes can deliver low concentrations of non-targeted Quantum dots into the cytosol of living cells via a lipid-mediated fusion with the cell membrane. The intracellular Quantum dots exhibit aggregation that appears dependent upon their concentration, but does not visibly affect cell viability. Our results point towards the use of cationic liposomes as an effective delivery system for targeted Quantum dots within the cell cytosol, which would facilitate live cell imaging of the labeled molecules.

Multifrequency pulsed electron paramagnetic resonance study of the S2 state of the photosystem II manganese cluster.

Multifrequency electron spin-echo envelope modulation (ESEEM) spectroscopy is employed to measure the strength of the hyperfine coupling of magnetic nuclei to the paramagnetic (S = 1/2) S2 form of photosystem II (PSII). Previous X-band-frequency ESEEM studies indicated that one or more histidine nitrogens are electronically coupled to the tetranuclear manganese cluster in the S2 state of PSII. However, the spectral resolution was relatively poor at the approximately 9 GHz excitation frequency, precluding any in-depth analysis of the corresponding bonding interaction between the detected histidine and the manganese cluster. Here we report ESEEM experiments using higher X-, P-, and Ka-band microwave frequencies to target PSII membranes isolated from spinach. The X- to P-band ESEEM spectra suffer from the same poor resolution as that observed in previous experiments, while the Ka-band spectra show remarkably well-resolved features that allow for the direct determination of the nuclear quadrupolar couplings for a single I = 1(14)N nucleus. The Ka-band results demonstrate that at an applied field of 1.1 T we are much closer to the exact cancellation limit (alpha iso = 2nu(14)N) that optimizes ESEEM spectra. These results reveal hyperfine (alpha iso = 7.3 +/- 0.20 MHz and alpha dip = 0.50 +/- 0.10 MHz) and nuclear quadrupolar (e(2)qQ = 1.98 +/- 0.05 MHz and eta = 0.84 +/- 0.06) couplings for a single (14)N nucleus magnetically coupled to the manganese cluster in the S 2 state of PSII. These values are compared to the histidine imidazole nitrogen hyperfine and nuclear quadrupolar couplings found in superoxidized manganese catalase as well as (14)N couplings in relevant manganese model complexes.

Multifrequency electron spin-echo envelope modulation studies of nitrogen ligation to the manganese cluster of photosystem II.

The CalEPR Center at UC-Davis (http://brittepr.ucdavis.edu) is equipped with five research grade electron paramagnetic resonance (EPR) instruments operating at various excitation frequencies between 8 and 130GHz. Of particular note for this RSC meeting are two pulsed EPR spectrometers working at the intermediate microwave frequencies of 31 and 35GHz. Previous lower frequency electron spin-echo envelope modulation (ESEEM) studies indicated that histidine nitrogen is electronically coupled to the Mn cluster in the S2 state of photosystem II (PSII). However, the amplitude and resolution of the spectra were relatively poor at these low frequencies, precluding any in-depth analysis of the electronic structure properties of this closely associated nitrogen nucleus. With the intermediate frequency instruments, we are much closer to the 'exact cancellation' limit, which optimizes ESEEM spectra for hyperfine-coupled nuclei such as 14N and 15N. Herein, we report the results from ESEEM studies of both 14N- and 15N-labelled PSII at these two frequencies. Spectral simulations were constrained by both isotope datasets at both frequencies, with a focus on high-resolution spectral examination of the histidine ligation to the Mn cluster in the S2 state.

Spectral bar coding of polystyrene microbeads using multicolored quantum dots.

This paper focuses on encoding polystyrene microbeads, 10-100 microm in diameter, with a luminescent spectral bar code composed of mixtures of quantum dots (QDs) emitting at different wavelengths (colors). The QDs are encapsulated in the bead interior during the bead synthesis using a suspension polymerization, and the bar code is constructed by varying both the number of colors included in the bead and, for each color, the number of QDs of that color. Confocal laser scanning microscopy images of the beads demonstrate that the multicolored QDs are pushed together into inclusions within the bead interior. The encoded bead emission spectrum indicates that the peak position of the included colors does not shift relative to the corresponding peaks of the spectra recorded for the nonaggregated QDs at identical loading concentrations. Due to the spatial proximity of the QDs in the inclusions, electronic energy transfer from the lower wavelength emitting QDs to the higher emitting QDs changes the relative intensities of the colors compared to the values in the nonaggregated spectra. We show that this energy transfer does not obscure the spectral uniqueness of the different codes. Ratiometric encoding, in which the bar code is read as relative color intensity, is shown to remove the dependence of the code on the bead size.

Templated assembly of biomembranes on silica microspheres using bacteriorhodopsin conjugates as structural anchors.

Membrane proteins are some of the most sophisticated molecules found in nature. These molecules have extraordinary recognition properties; hence, they represent a vast source of specialized materials with potential uses in sensing and screening applications. However, the strict requirement of the native lipid environment to preserve their structure and functionality presents an impediment in building biofunctional materials from these molecules. In general, the purification protocols remove the native lipid support structures found in the cellular environment that stabilize the membrane proteins. Furthermore, the membrane protein structure is often highly complex, typified by large, multisubunit complexes that not only span the lipid bilayer but also contain large (>2 nm) cytoplasmic and extracellular domains that protrude from the membrane. The present study is focused on using a biomimetic approach to build a stable, fluid microenvironment to be used to incorporate larger membrane proteins of interest into a tether-supported lipid bilayer membrane adequately spaced above a substrate passivated to liposome fusion and nonspecific adsorption. Our aim is to reintroduce the supporting structures of the native cell membrane using self-assembled supramolecular complexes constructed on microspheres in an artificial cytoskeleton motif. Central to our architecture is to utilize bacteriorhodopsin (bR), a transmembrane protein, as a biomembrane anchoring molecule to be tethered to surfaces of interest as a sparse structural element in the design. Compared to a typical lipid tether, which inserts into one leaflet of the lipid bilayer, bR anchoring provides an over 8-fold greater hydrophobic surface area in contact with the bilayer. In the work presented here, the silica microsphere surface was biofunctionalized with streptavidin to make it a suitable supporting interface. This was achieved by self-assembly of (p-aminophenyl)trimethoxysilane on the silica surface followed by subsequent conjugation of biotin-PEG3400 (PEG = poly(ethylene glycol) and PEG2000 for further passivation and the binding of streptavidin. We have conjugated bR with biotin-PEG3400 through amine-based coupling to use it as a tether. The biotin-PEG-bR conjugate was further labeled with Texas Red to facilitate localization via fluorescence imaging. Confocal microscopy was utilized to analyze the microsphere surface at different stages of surface modification by employing fluorescent staining techniques. Sparely tethered supported lipid bilayer membranes were constructed successfully on streptavidin-functionalized silica particles (5 mum) using a detergent-based method in which tethered bR nucleates self-assembly of the bilayer membrane. The fluidity of the supported membranes was analyzed using fluorescence recovery after photobleaching in confocal imaging detection mode. The phospholipid diffusion coefficients obtained from these studies indicated that nativelike fluidity was achieved in the tether-supported membranes, thus providing a prospective microenvironment for insertion of membrane proteins of interest.

Synthesis and characterization of bioconjugates of S-layer proteins.

The self-assembling proteins that form crystalline surface layers (S-layers) on many microbial species have found numerous applications due to their nanostructured nature. To devise a new method to construct surface displays that exploit S-layer self-assembly activity and nanostructural properties, we have constructed polymer bioconjugates of S-layer proteins. The conjugates formed are similar in function to the monomer alkanethiols that form self-assembled monolayers (SAMs) on gold surfaces. However, the self-assembly is driven by the protein "headgroup" that positions polymer-tethered endgroups on a surface. This paper examines the integration of protein purification, conjugation, and surface assembly that has led to the development of this new method for the formation of nanostructured surfaces. Purified S-layer proteins from Lactobacillus brevis were conjugated with small molecule probes and polymers using amine-based reactions. To keep multiple labeling of protein amine groups to acceptable levels, the conjugations were performed at pH 6.5, allowing for limited yields (24-39%) as determined by mass spectrometry and SDS-polyacrylamide gel electrophoresis. As the presence of high levels of unlabeled S-layer proteins is undesired, we have developed a protocol for further purification that employs monomeric avidin affinity chromatography. The surface self-assembly of the polymer bioconjugates onto amine-terminated microspheres was studied using epi-fluorescence, confocal, and scanning electron microscopy. The surfaces obtained exhibited homogeneous distributions of tethered molecules. Also, in cases where the modular assembly of two distinct types of tethered endgroups was accomplished, there was no evidence for phase separation in the surfaces. The modular assembly method will provide a potential route to controlling surface display density as the starting assembly conditions guide displayed endgroup concentrations in mixed molecular monolayers.