Conversion of 2-methyl-4-styrylquinolines into 2,4-distyrylquinolines: synthesis, and spectroscopic and structural characterization of five examples.

Four new 2,4-distyrylquinolines and one 2-styryl-4-[2-(thiophen-2-yl)vinyl]quinoline have been synthesized using indium trichloride condensation reactions between aromatic aldehydes and the corresponding 2-methylquinolines, which were themselves prepared using Friedländer annulation reactions between mono- or diketones and (2-aminophenyl)chalcones: the products have all been fully characterized by spectroscopic and crystallographic methods. 2,4-Bis[(E)-styryl]quinoline, C25H19N, (IIa), and its dichloro analogue, 2-[(E)-2,4-dichlorostyryl]-4-[(E)-styryl]quinoline, C25H17Cl2N, (IIb), exhibit different orientations of the 2-styryl unit relative to the quinoline nucleus. In each of the 3-benzoyl analogues {2-[(E)-4-bromostyryl]-4-[(E)-styryl]quinolin-3-yl}(phenyl)methanone, C32H22BrNO, (IIc), {2-[(E)-4-bromostyryl]-4-[(E)-4-chlorostyryl]quinolin-3-yl}(phenyl)methanone, C32H21BrClNO, (IId), and {2-[(E)-4-bromostyryl]-4-[(E)-2-(thiophen-2-yl)vinyl]quinolin-3-yl}(phenyl)methanone, C30H20BrNOS, (IIe), the orientation of the 2-styryl unit is similar to that in (IIa), but the orientation of the 4-arylvinyl units show considerable variation. The thiophene unit in (IIe) is disordered over two sets of atomic sites having occupancies of 0.926 (3) and 0.074 (3). There are no hydrogen bonds of any kind in the structure of (IIa), but in (IId), a single C-H...O hydrogen bond links the molecules into cyclic centrosymmetric R22(20) dimers. A combination of C-H...N and C-H...π hydrogen bonds links the molecules of (IIb) into a three-dimensional framework structure. A combination of three C-H...π hydrogen bonds links the molecules of (IIc) into sheets, and a combination of C-H...O and C-H...π hydrogen bonds forms sheets in (IIe). Comparisons are made with the structures of some related compounds.

A three-step pathway from (2-aminophenyl)chalcones to novel styrylquinoline-chalcone hybrids: synthesis and spectroscopic and structural characterization of three examples.

Three new styrylquinoline-chalcone hybrids have been synthesized using a three-step pathway starting with Friedländer cyclocondensation between (2-aminophenyl)chalcones and acetone to give 2-methyl-4-styrylquinolines, followed by selective oxidation to the 2-formyl analogues, and finally Claisen-Schmidt condensation between the formyl intermediates and 1-acetylnaphthalene. All intermediates and the final products have been fully characterized by IR and 1H/13C NMR spectroscopy, and by high-resolution mass spectrometry, and the three products have been characterized by single-crystal X-ray diffraction. The molecular conformations of (E)-3-{4-[(E)-2-phenylethenyl]quinolin-2-yl}-1-(naphthalen-1-yl)prop-2-en-1-one, C30H21NO, (IVa), and (E)-3-{4-[(E)-2-(4-fluorophenyl)ethenyl]quinolin-2-yl}-1-(naphthalen-1-yl)prop-2-en-1-one, C30H20FNO, (IVb), are very similar. In each compound, the molecules are linked into a three-dimensional array by hydrogen bonds, of the C-H...O and C-H...N types in (IVa), and of the C-H...O and C-H...π types in (IVb), and by two independent π-π stacking interactions. By contrast, the conformation of the chalcone unit in (E)-3-{4-[(E)-2-(2-chlorophenyl)ethenyl]quinolin-2-yl}-1-(naphthalen-1-yl)prop-2-en-1-one, C30H20ClNO, (IVc), differs from those in (IVa) and (IVb). There are only weak hydrogen bonds in the structure of (IVc), but a single rather weak π-π stacking interaction links the molecules into chains. Comparisons are made with some related structures.

Synthesis, and spectroscopic and structural characterization of three new styrylquinoline-benzimidazole hybrids.

Three new 4-styrylquinoline-benzimidazole hybrids have been synthesized using a reaction sequence in which 2-methylquinoline precursors first undergo selective oxidation by selenium dioxide to form the corresponding 2-formylquinoline intermediates, followed by oxidative cyclocondensation reactions with benzene-1,2-diamine to yield the hybrid products. The formyl intermediates and the hybrid products have all been fully characterized using a combination of IR, 1H and 13C NMR spectroscopy, and high-resolution mass spectrometry, and the structures of the three hybrid products have been determined using single-crystal X-ray diffraction. Ethyl (E)-2-(1H-benzo[d]imidazol-2-yl)-4-(4-chlorostyryl)quinoline-3-carboxylate, C27H20ClN3O2, (IIIa), and ethyl (E)-2-(1H-benzo[d]imidazol-2-yl)-4-(2-methoxystyryl)quinoline-3-carboxylate, C28H23N3O3, (IIIb), both crystallize in the solvent-free form with Z' = 1, but ethyl (E)-2-(1H-benzo[d]imidazol-2-yl)-4-(4-methylstyryl)quinoline-3-carboxylate, C28H23N3O2, (IIIc), crystallizes as a partial hexane solvate with Z' = 3, and the ester group in one of the independent molecules is disordered over two sets of atomic sites having occupancies of 0.765 (7) and 0.235 (7). The molecules of (IIIc) enclose continuous channels which are occupied by disordered solvent molecules having partial occupancy. In all of the molecules of (IIIa)-(IIIc), the styrylquinoline fragment is markedly nonplanar. Different combinations of N-H...O and C-H...π hydrogen bonds generate supramolecular assemblies which are two-dimensional in (IIIb) and (IIIc), but three-dimensional in (IIIa). Comparisons are made with the structures of some related compounds.

Synthesis and spectroscopic and structural characterization of three new 2-methyl-4-styrylquinolines formed using Friedländer reactions between (2-aminophenyl)chalcones and acetone.

Three new 2-methyl-4-styrylquinoline derivatives have been synthesized in high yields using Friedländer reactions between chalcones [1-(2-aminophenyl)-3-arylprop-2-en-1-ones] and acetone, and characterized using IR, 1H and 13C NMR spectroscopy, and mass spectrometry, and by crystal structure analysis. In (E)-4-(4-fluorostyryl)-2-methylquinoline, C18H14FN, (I), the molecules are joined into cyclic centrosymmetric dimers by C-H...N hydrogen bonds and these dimers are linked into sheets by π-π stacking interactions. The molecules of (E)-2-methyl-4-[4-(trifluoromethyl)styryl]quinoline, C19H14F3N, (II), are linked into cyclic centrosymmetric dimers by C-H...π hydrogen bonds and these dimers are linked into chains by a single π-π stacking interaction. There are no significant hydrogen bonds in the structure of (E)-4-(2,6-dichlorostyryl)-2-methylquinoline, C18H13Cl2N, (III), but molecules related by translation along [010] form stacks with an intermolecular spacing of only 3.8628 (2) Å. Comparisons are made with the structures of some related compounds.

Synthesis and spectroscopic and structural characterization of spiro[indoline-3,3'-indolizine]s formed by 1,3-dipolar cycloadditions between isatins, pipecolic acid and an electron-deficient alkene.

Five new spiro[indoline-3,3'-indolizine]s have been synthesized with high regio- and stereospecificity in one-pot three-component reactions between a substituted indole-2,3-dione, (S)-pipecolic acid and trans-3-benzoylacrylic acid, and subsequently characterized using a combination of elemental analysis, IR and 1H and 13C NMR spectroscopy, mass spectrometry and crystal structure analysis. (1'SR,2'SR,3RS,8a'RS)-2'-Benzoyl-5-fluoro-2-oxo-1',5',6',7',8',8a'-hexahydro-2'H-spiro[indoline-3,3'-indolizine]-1'-carboxylic acid, C23H21FN2O4, (I), and (1'SR,2'SR,3RS,8a'RS)-2'-benzoyl-5-methyl-2-oxo-1',5',6',7',8',8a'-hexahydro-2'H-spiro[indoline-3,3'-indolizine]-1'-carboxylic acid, C24H24N2O4, (II), are isomorphous, as are (1'SR,2'SR,3RS,8a'RS)-2'-benzoyl-1-methyl-2-oxo-1',5',6',7',8',8a'-hexahydro-2'H-spiro[indoline-3,3'-indolizine]-1'-carboxylic acid, C24H24N2O4, (III), and (1'SR,2'SR,3RS,8a'RS)-2'-benzoyl-5-chloro-1-methyl-2-oxo-1',5',6',7',8',8a'-hexahydro-2'H-spiro[indoline-3,3'-indolizine]-1'-carboxylic acid, C24H23ClN2O4, (IV). Within each isomorphous pair, the spiro ring systems show some conformational differences. In each of (I) and (II), the molecules are linked into complex sheets by a combination of four types of hydrogen bond, and in each of (III) and (IV), a combination of O-H...O and C-H...π(arene) hydrogen bonds links the molecules to form a chain of centrosymmetric rings. In (1'SR,2'SR,3RS,8a'RS)-2'-benzoyl-1-hexyl-2-oxo-1',5',6',7',8',8a'-hexahydro-2'H-spiro[indoline-3,3'-indolizine]-1'-carboxylic acid, C29H34N2O4, (V), a combination of five hydrogen bonds links the molecules into sheets of alternating R22(16) and R66(46) rings. A mechanism is proposed for the formation of compounds (I)-(V) and some comparisons with related structures are made.

4-Styrylquinolines from cyclocondensation reactions between (2-aminophenyl)chalcones and 1,3-diketones: crystal structures and regiochemistry.

Structures are reported for two matched sets of substituted 4-styrylquinolines which were prepared by the formation of the heterocyclic ring in cyclocondensation reactions between 1-(2-aminophenyl)-3-arylprop-2-en-1-ones with 1,3-dicarbonyl compounds. (E)-3-Acetyl-4-[2-(4-methoxyphenyl)ethenyl]-2-methylquinoline, C21H19NO2, (I), (E)-3-acetyl-4-[2-(4-bromophenyl)ethenyl]-2-methylquinoline, C20H16BrNO, (II), and (E)-3-acetyl-2-methyl-4-{2-[4-(trifluoromethyl)phenyl]ethenyl}quinoline, C21H16F3NO, (III), are isomorphous and in each structure the molecules are linked by a single C-H...O hydrogen bond to form C(6) chains. In (I), but not in (II) or (III), this is augmented by a C-H...π(arene) hydrogen bond to form a chain of rings; hence, (I)-(III) are not strictly isostructural. By contrast with (I)-(III), no two of ethyl (E)-4-[2-(4-methoxyphenyl)ethenyl]-2-methylquinoline-3-carboxylate, C22H21NO3, (IV), ethyl (E)-4-[2-(4-bromophenyl)ethenyl]-2-methylquinoline-3-carboxylate, C21H18BrNO2, (V), and ethyl (E)-2-methyl-4-{2-[4-(trifluoromethyl)phenyl]ethenyl}quinoline-3-carboxylate, C22H18F3NO2, (VI), are isomorphous. The molecules of (IV) are linked by a single C-H...O hydrogen bond to form C(13) chains, but cyclic centrosymmetric dimers are formed in both (V) and (VI). The dimer in (V) contains a C-H...π(pyridyl) hydrogen bond, while that in (VI) contains two independent C-H...O hydrogen bonds. Comparisons are made with some related structures, and both the regiochemistry and the mechanism of the heterocyclic ring formation are discussed.

Regio- and stereospecific assembly of dispiro[indoline-3,3'-pyrrolizine-1',5''-thiazolidines] from simple precursors using a one-pot procedure: synthesis, spectroscopic and structural characterization, and a proposed mechanism of formation.

The synthesis and characterization of three new dispiro[indoline-3,3'-pyrrolizine-1',5''-thiazolidine] compounds are reported, together with the crystal structures of two of them. (3RS,1'SR,2'SR,7a'SR)-2'-(4-Chlorophenyl)-1-hexyl-2''-sulfanylidene-5',6',7',7a'-tetrahydro-2'H-dispiro[indoline-3,3'-pyrrolizine-1',5''-thiazolidine]-2,4''-dione, C28H30ClN3O2S2, (I), (3RS,1'SR,2'SR,7a'SR)-2'-(4-chlorophenyl)-1-benzyl-5-methyl-2''-sulfanylidene-5',6',7',7a'-tetrahydro-2'H-dispiro[indoline-3,3'-pyrrolizine-1',5''-thiazolidine]-2,4''-dione, C30H26ClN3O2S2, (II), and (3RS,1'SR,2'SR,7a'SR)-2'-(4-chlorophenyl)-5-fluoro-2''-sulfanylidene-5',6',7',7a'-tetrahydro-2'H-dispiro[indoline-3,3'-pyrrolizine-1',5''-thiazolidine]-2,4''-dione, C22H17ClFN3O2S2, (III), were each isolated as a single regioisomer using a one-pot reaction involving L-proline, a substituted isatin and (Z)-5-(4-chlorobenzylidene)-2-sulfanylidenethiazolidin-4-one [5-(4-chlorobenzylidene)rhodanine]. The compositions of (I)-(III) were established by elemental analysis, complemented by high-resolution mass spectrometry in the case of (I); their constitutions, including the definition of the regiochemistry, were established using NMR spectroscopy, and the relative configurations at the four stereogenic centres were established using single-crystal X-ray structure analysis. A possible reaction mechanism for the formation of (I)-(III) is proposed, based on the detailed stereochemistry. The molecules of (I) are linked into simple chains by a single N-H...N hydrogen bond, those of (II) are linked into a chain of rings by a combination of N-H...O and C-H...S=C hydrogen bonds, and those of (III) are linked into sheets by a combination of N-H...N and N-H...S=C hydrogen bonds.

Synthesis of N-substituted 3-(2-aryl-2-oxoethyl)-3-hydroxyindolin-2-ones and their conversion to N-substituted (E)-3-(2-aryl-2-oxoethylidene)indolin-2-ones: synthetic sequence, spectroscopic characterization and structures of four 3-hydroxy compounds and five oxoethylidene products.

An operationally simple and time-efficient approach has been developed for the synthesis of racemic N-substituted 3-(2-aryl-2-oxoethyl)-3-hydroxyindolin-2-ones by a piperidine-catalysed aldol reaction between aryl methyl ketones and N-alkylisatins. These aldol products were used successfully as strategic intermediates for the preparation of N-substituted (E)-3-(2-hetaryl-2-oxoethylidene)indolin-2-ones by a stereoselective dehydration reaction under acidic conditions. The products have all been fully characterized by 1H and 13C NMR spectroscopy, by mass spectrometry and, for a representative selection, by crystal structure analysis. In each of (RS)-1-benzyl-3-hydroxy-3-[2-(4-methoxyphenyl)-2-oxoethyl]indolin-2-one, C24H21NO4, (Ic), and (RS)-1-benzyl-3-{2-[4-(dimethylamino)phenyl]-2-oxoethyl}-3-hydroxyindolin-2-one, C25H24N2O3, (Id), inversion-related pairs of molecules are linked by O-H...O hydrogen bonds to form R22(10) rings, which are further linked into chains of rings by a combination of C-H...O and C-H...π(arene) hydrogen bonds in (Ic) and by C-H...π(arene) hydrogen bonds in (Id). The molecules of (RS)-1-benzyl-3-hydroxy-3-[2-oxo-2-(pyridin-4-yl)ethyl]indolin-2-one, C22H18N2O3, (Ie), are linked into a three-dimensional framework structure by a combination of O-H...N, C-H...O and C-H...π(arene) hydrogen bonds. (RS)-3-[2-(Benzo[d][1,3]dioxol-5-yl)-2-oxoethyl]-1-benzyl-3-hydroxyindolin-2-one, C24H19NO5, (If), crystallizes with Z' = 2 in the space group P-1 and the molecules are linked into complex sheets by a combination of O-H...O, C-H...O and C-H...π(arene) hydrogen bonds. In each of (E)-1-benzyl-3-[2-(4-fluorophenyl)-2-oxoethylidene]indolin-2-one, C23H16FNO2, (IIa), and (E)-1-benzyl-3-[2-oxo-2-(thiophen-2-yl)ethylidene]indolin-2-one, C21H15NO2S, (IIg), the molecules are linked into simple chains by a single C-H...O hydrogen bond, while those of (E)-1-benzyl-3-[2-oxo-2-(pyridin-4-yl)ethylidene]indolin-2-one, C22H16N2O2, (IIe), are linked by three C-H...O hydrogen bonds to form sheets which are further linked into a three-dimensional structure by C-H...π(arene) hydrogen bonds. There are no hydrogen bonds in the structures of either (E)-1-benzyl-3-[2-(4-methoxyphenyl)-2-oxoethylidene]indolin-2-one, C24H19NO3, (IIc), or (E)-1-benzyl-5-chloro-3-[2-(4-chlorophenyl)-2-oxoethylidene]indolin-2-one, C23H15Cl2NO2, (IIh), but the molecules of (IIh) are linked into chains of π-stacked dimers by a combination of C-Cl...π(arene) and aromatic π-π stacking interactions.

Conversion of 3-amino-4-arylamino-1H-isochromen-1-ones to 1-arylisochromeno[3,4-d][1,2,3]triazol-5(1H)-ones: synthesis, spectroscopic characterization and the structures of four products and one ring-opened derivative.

An efficient synthesis of 1-arylisochromeno[3,4-d][1,2,3]triazol-5(1H)-ones, involving the diazotization of 3-amino-4-arylamino-1H-isochromen-1-ones in weakly acidic solution, has been developed and the spectroscopic characterization and crystal structures of four examples are reported. The molecules of 1-phenylisochromeno[3,4-d][1,2,3]triazol-5(1H)-one, C15H9N3O2, (I), are linked into sheets by a combination of C-H...N and C-H...O hydrogen bonds, while the structures of 1-(2-methylphenyl)isochromeno[3,4-d][1,2,3]triazol-5(1H)-one, C16H11N3O2, (II), and 1-(3-chlorophenyl)isochromeno[3,4-d][1,2,3]triazol-5(1H)-one, C15H8ClN3O2, (III), each contain just one hydrogen bond which links the molecules into simple chains, which are further linked into sheets by π-stacking interactions in (II) but not in (III). In the structure of 1-(4-chlorophenyl)isochromeno[3,4-d][1,2,3]triazol-5(1H)-one, (IV), isomeric with (III), a combination of C-H...O and C-H...π(arene) hydrogen bonds links the molecules into sheets. When compound (II) was exposed to a strong acid in methanol, quantitative conversion occurred to give the ring-opened transesterification product methyl 2-[4-hydroxy-1-(2-methylphenyl)-1H-1,2,3-triazol-5-yl]benzoate, C17H15N3O3, (V), where the molecules are linked by paired O-H...O hydrogen bonds to form centrosymmetric dimers.

A concise and efficient synthesis of amino-substituted (1H-benzo[d]imidazol-1-yl)pyrimidine hybrids: synthetic sequence and the molecular and supramolecular structures of six examples.

A concise and efficient synthesis of a series of amino-substituted benzimidazole-pyrimidine hybrids has been developed, starting from the readily available N4-(2-aminophenyl)-6-methoxy-5-nitrosopyrimidine-2,4-diamine. In each of N5-benzyl-6-methoxy-4-(2-phenyl-1H-benzo[d]imidazol-1-yl)pyrimidine-2,5-diamine, C25H22N6O, (I), 6-methoxy-N5-(4-methoxybenzyl)-4-[2-(4-methoxyphenyl)-1H-benzo[d]imidazol-1-yl]pyrimidine-2,5-diamine, C27H26N6O3, (III), 6-methoxy-N5-(4-nitrobenzyl)-4-[2-(4-nitrophenyl)-1H-benzo[d]imidazol-1-yl]pyrimidine-2,5-diamine, C25H20N8O5, (IV), the molecules are linked into three-dimensional framework structures, using different combinations of N-H...N, N-H...O, C-H...O, C-H...N and C-H...π hydrogen bonds in each case. Oxidative cleavage of 6-methoxy-N5-(4-methylbenzyl)-4-[2-(4-methylphenyl)-1H-benzo[d]imidazol-1-yl]pyrimidine-2,5-diamine, (II), with diiodine gave 6-methoxy-4-[2-(4-methylphenyl)-1H-benzo[d]imidazol-1-yl]pyrimidine-2,5-diamine, which crystallized as a monohydrate, C19H18N6O·H2O, (V), and reaction of (V) with trifluoroacetic acid gave two isomeric products, namely N-{5-amino-6-methoxy-6-[2-(4-methylphenyl)-1H-benzo[d]imidazol-1-yl]pyrimidin-2-yl}-2,2,2-trifluoroacetamide, which crystallized as an ethyl acetate monosolvate, C21H17F3N6O2·C4H8O2, (VI), and N-{2-amino-6-methoxy-4-[2-(4-methylphenyl)-1H-benzo[d]imidazol-1-yl]pyrimidin-5-yl}-2,2,2-trifluoroacetamide, which crystallized as a methanol monosolvate, C21H17F3N6O2·CH4O, (VIIa). For each of (V), (VI) and (VIIa), the supramolecular assembly is two-dimensional, based on different combinations of O-H...N, N-H...O, N-H...N, C-H...O and C-H...π hydrogen bonds in each case. Comparisons are made with some related structures.

A concise and efficient concurrent synthesis of 6,11-dihydrodibenzo[b,e]azepines and 5,6,11,12-tetrahydrodibenzo[b,f]azocines and their conversion to 4-oxo-8,13-dihydro-4H-benzo[5,6]azepino[3,2,1-ij]quinoline-5-carboxylates and N-acetyl-5,6,11,12-tetrahydrodibenzo[b,f]azocines: synthetic sequence, spectroscopic characterization and the structures of two products.

Reaction of 2-allyl-N-benzyl-4-fluoroaniline or 2-allyl-N-benzyl-4-chloroaniline with 98% sulfuric acid leads to the concurrent formation of halogeno-substituted 11-ethyl-6,11-dihydrodibenzo[b,e]azepines, (II), and halogeno-substituted 11-methyl-5,6,11,12-tetrahydrodibenzo[b,f]azocines, (III), in each case in (II):(III) molar ratios of ca 2:1. Further reaction of (II) leads to ethyl 13-ethyl-2-halogeno-4-oxo-8,13-dihydro-4H-benzo[5,6]azepino[3,2,1-ij]quinoline-5-carboxylate, while acetylation of (III) gives the corresponding N-acetyl derivatives. The dibenzo[b,e]azepine and dibenzo[b,f]azocine ring systems are of importance in forming the core of a variety of bioactive compounds. In ethyl 13-ethyl-2-fluoro-4-oxo-8,13-dihydro-4H-benzo[5,6]azepino[3,2,1-ij]quinoline-5-carboxylate, C22H20FNO3, (IVa), the azepine ring adopts a conformation close to the twist-boat form, and the molecules are linked into a three-dimensional framework structure by a combination of C-H...O and C-H...π(arene) hydrogen bonds. The azocine ring in 5-acetyl-2-chloro-11-methyl-5,6,11,12-tetrahydrobenzo[b,f]azocine, C18H18ClNO, (Vb), adopts the boat-boat conformation and the molecules are again linked by C-H...O and C-H...π(arene) hydrogen bonds, but this time form a sheet structure.

Monoclinic and orthorhombic forms of (RS)-(E)-4-[2-(4-chlorobenzylidene)hydrazinyl]-6,11-dimethyl-6,11-dihydro-5H-benzo[b]pyrimido[5,4-f]azepine: synthesis, concomitant polymorphism and supramolecular assembly mediated by C-H...N, C-H...π(arene) and C-Cl...π(arene) interactions.

The title compound, C21H20ClN5, has been synthesized in two steps from (RS)-4-chloro-6,11-dimethyl-6,11-dihydro-5H-benzo[b]pyrimido[5,4-f]azepine and characterized by 1H and 13C NMR spectroscopy and by high-resolution mass spectrometry. Crystallization from hexane-ethyl acetate yields approximately equal quantities of a monoclinic polymorph in the space group Cc, (I), and an orthorhombic polymorph in the space group Pna21, (II). The molecules in polymorphs (I) and (II) show small differences in their molecular conformations, particularly in the shape of the azepine ring and the orientation of the chlorophenyl substituent. The molecules in polymorph (I) are linked by C-H...N and C-H...π(arene) hydrogen bonds to form sheets, which are linked into a three-dimensional framework structure by C-Cl...π(arene) interactions. There are no C-Cl...π(arene) interactions between the molecules in polymorph (II) and the supramolecular assembly takes the form of sheets built from C-H...N and C-H...π(arene) hydrogen bonds. Comparisons are made with some related structures.

A concise and versatile route to tetrahydro-1-benzazepines carrying [a]-fused heterocyclic units: synthetic sequence and spectroscopic characterization, and the molecular and supramolecular structures of one intermediate and two products.

A concise, efficient and versatile route from simple starting materials to tricyclic tetrahydro-1-benzazepines carrying [a]-fused heterocyclic units is reported. Thus, the easily accessible methyl 2-[(2-allyl-4-chlorophenyl)amino]acetate, (I), was converted, via (2RS,4SR)-7-chloro-2,3,4,5-tetrahydro-1,4-epoxy-1-benzo[b]azepine-2-carboxylate, (II), to the key intermediate methyl (2RS,4SR)-7-chloro-4-hydroxy-2,3,4,5-tetrahydro-1H-benzo[b]azepine-2-carboxylate, (III). Chloroacetylation of (III) provided the two regioisomers methyl (2RS,4SR)-7-chloro-1-(2-chloroacetyl)-4-hydroxy-2,3,4,5-tetrahydro-1H-benzo[b]azepine-2-carboxylate, (IVa), and methyl (2RS,4SR)-7-chloro-4-(2-chloroacetoxy)-2,3,4,5-tetrahydro-1H-benzo[b]azepine-2-carboxylate, C14H15Cl2NO4, (IVb), as the major and minor products, respectively, and further reaction of (IVa) with aminoethanol gave the tricyclic target compound (4aRS,6SR)-9-chloro-6-hydroxy-3-(2-hydroxyethyl)-2,3,4a,5,6,7-hexahydrobenzo[f]pyrazino[1,2-a]azepine-1,4-dione, C15H17ClN2O4, (V). Reaction of ester (III) with hydrazine hydrate gave the corresponding carbohydrazide (VI), which, with trimethoxymethane, gave a second tricyclic target product, (4aRS,6SR)-9-chloro-6-hydroxy-4a,5,6,7-tetrahydrobenzo[f][1,2,4]triazino[4,5-a]azepin-4(3H)-one, C12H12ClN3O2, (VII). Full spectroscopic characterization (IR, 1H and 13C NMR, and mass spectrometry) is reported for each of compounds (I)-(III), (IVa), (IVb) and (V)-(VII), along with the molecular and supramolecular structures of (IVb), (V) and (VII). In each of (IVb), (V) and (VII), the azepine ring adopts a chair conformation and the six-membered heterocyclic rings in (V) and (VII) adopt approximate boat forms. The molecules in (IVb), (V) and (VII) are linked, in each case, into complex hydrogen-bonded sheets, but these sheets all contain a different range of hydrogen-bond types: N-H...O, C-H...O, C-H...N and C-H...π(arene) in (IVb), multiple C-H...O hydrogen bonds in (V), and N-H...N, O-H...O, C-H...N, C-H...O and C-H...π(arene) in (VII).

A concise, efficient and versatile synthesis of amino-substituted benzo[b]pyrimido[5,4-f]azepines: synthesis and spectroscopic characterization, together with the molecular and supramolecular structures of three products and one intermediate.

A concise, efficient and versatile synthesis of amino-substituted benzo[b]pyrimido[5,4-f]azepines is described: starting from a 5-allyl-4,6-dichloropyrimidine, the synthesis involves base-catalysed aminolysis followed by intramolecular Friedel-Crafts cyclization. Four new amino-substituted benzo[b]pyrimido[5,4-f]azepines are reported, and all the products and reaction intermediates have been fully characterized by IR, 1H and 13C NMR spectroscopy and mass spectrometry, and the molecular and supramolecular structures of three products and one intermediate have been determined. In each of N,2,6,11-tetramethyl-N-phenyl-6,11-dihydro-5H-benzo[b]pyrimido[5,4-f]azepin-4-amine, C22H24N5, (III), 4-(1H-benzo[d]imidazol-1-yl)-6,11-dimethyl-6,11-dihydro-5H-benzo[b]pyrimido[5,4-f]azepine, which crystallizes as a 0.374-hydrate, C21H19N5·0.374H2O, (VIIIa), and 6,7,9,11-tetramethyl-4-(5-methyl-1H-benzo[d]imidazol-1-yl)-6,11-dihydro-5H-benzo[b]pyrimido[5,4-f]azepine, C24H25N5, (VIIIc), the azepine ring adopts a boat conformation, but with a different configuration at the stereogenic centre in (VIIIc), as compared with (III) and (VIIIa). In the intermediate 5-allyl-6-(1H-benzo[d]imidazol-1-yl)-N-methyl-N-(4-methylphenyl)pyrimidin-4-amine, C22N21N5, (VIIb), the immediate precursor of 4-(1H-benzo[d]imidazol-1-yl)-6,8,11-trimethyl-6,11-dihydro-5H-benzo[b]pyrimido[5,4-f]azepine, (VIIIb), the allyl group is disordered over two sets of atomic sites having occupancies of 0.688 (5) and 0.312 (5). The molecules of (III) are linked into chains by a C-H...π(pyrimidine) hydrogen bond, and those of (VIIb) are linked into complex sheets by three hydrogen bonds, one of the C-H...N type and two of C-H...π(arene) type. The molecules of the organic component in (VIIIa) are linked into a chain of rings by two C-H...π(arene) hydrogen bonds, and these chains are linked into sheets by the water components; a single weak C-H...N hydrogen bond links molecules of (VIIIc) into centrosymmetric R22(10) dimers. Comparisons are made with some related compounds.

A versatile synthesis of cyclic dipeptides using the stepwise construction of the piperazine-2,5-dione ring from simple precursors: synthetic sequence and the structure of a representative product, (3RS)-4-(2-allyl-3,5-dimethylphenyl)-1-benzyl-3-phenylpiperazine-2,5-dione.

A versatile synthesis of multiply substituted cyclic dipeptides has been designed, based on the stepwise construction of the piperazine-2,5-dione ring using molecular fragments from four different precursor molecules. Starting from substituted 2-allylanilines, reaction with methyl 2-bromo-2-phenylacetate yields the corresponding methyl 2-(2-allylanilino)-2-phenylacetates, which react with haloacetyl chlorides to give methyl 2-[N-(2-allylphenyl)-2-haloacetamido]-2-phenylacetates, which then undergo ring closure with benzylamine to yield the corresponding cyclic dipeptides of type 4-(2-allylphenyl)-1-benzyl-3-phenylpiperazine-2,5-dione. (3RS)-4-(2-Allyl-3,5-dimethylphenyl)-1-benzyl-3-phenylpiperazine-2,5-dione, C28H28N2O2, (IIId), crystallizes with Z' = 2 in the space group P21/c; the allyl groups in the two independent molecules adopt different conformations and, in one of them, the allyl group is disordered over two sets of atomic sites having occupancies of 0.534 (4) and 0.466 (4). In both molecules, the piperazine-2,5-dione ring adopts a boat conformation, with the 3-phenyl ring in a quasi-axial site. The molecules of (IIId) are linked into a three-dimensional framework structure by a combination of three C-H...O hydrogen bonds and three C-H...π(arene) hydrogen bonds. Comparisons are made with some related structures.

Design, synthesis and crystallographic study of novel indole-based cyano derivatives as key building blocks for heteropolycyclic compounds of major complexity.

A four-stage reaction sequence has been designed and developed for the synthesis of highly functionalized enolate esters as key building blocks for the synthesis of novel heteropolycyclic compounds of potential pharmaceutical value. The sequence starts with simple commercially available indoles and proceeds via 3-(indol-3-yl)-3-oxopropanenitriles, which react with 2-bromobenzaldehyde to form the corresponding chalcones; these are readily reduced to dihydrochalcones, which are in turn acylated to form the enolate esters. The compounds in this sequence have been characterized by IR and 1H and 13C NMR spectroscopy, by mass spectrometry and by elemental analysis. The molecular and supramolecular structures are reported for representative examples, namely (E)-3-(2-bromophenyl)-2-(1-methyl-1H-indole-3-carbonyl)acrylonitrile, C19H13BrN2O, (Ib), (2RS)-2-(2-bromobenzyl)-3-(1-methyl-1H-indol-3-yl)-3-oxopropanenitrile, C19H15BrN2O, (IIb), and (2RS)-3-(1-benzyl-1H-indol-3-yl)-2-(2-bromobenzyl)-3-oxopropanenitrile, C25H19BrN2O, (IIc), the latter two of which crystallize with Z' = 2, and (E)-1-(1-acetyl-1H-indol-3-yl)-3-(2-bromophenyl)-2-cyanoprop-1-en-1-yl acetate, C22H17BrN2O, (III), and (E)-1-(1-benzyl-1H-indol-3-yl)-3-(2-bromophenyl)-2-cyanoprop-1-en-1-yl benzoate, C32H23BrN2O, (IV). The structure of the related chalcone (E)-2-benzoyl-3-(2-bromophenyl)prop-2-enenitrile, (V), has been redetermined at 100 K, where it is monoclinic, as opposed to the triclinic form reported at ambient temperature.

Synthesis of spiro[indoline-3,3'-pyrrolizines] by 1,3-dipolar reactions between isatins, L-proline and electron-deficient alkenes.

Two spiro[indoline-3,3'-pyrrolizine] derivatives have been synthesized in good yield with high regio- and stereospecificity using one-pot reactions between readily available starting materials, namely L-proline, substituted 1H-indole-2,3-diones and electron-deficient alkenes. The products have been fully characterized by elemental analysis, IR and NMR spectroscopy, mass spectrometry and crystal structure analysis. In (1'RS,2'RS,3SR,7a'SR)-2'-benzoyl-1-hexyl-2-oxo-1',2',5',6',7',7a'-hexahydrospiro[indoline-3,3'-pyrrolizine]-1'-carboxylic acid, C28H32N2O4, (I), the unsubstituted pyrrole ring and the reduced spiro-fused pyrrole ring adopt half-chair and envelope conformations, respectively, while in (1'RS,2'RS,3SR,7a'SR)-1',2'-bis(4-chlorobenzoyl)-5,7-dichloro-2-oxo-1',2',5',6',7',7a'-hexahydrospiro[indoline-3,3'-pyrrolizine], which crystallizes as a partial dichloromethane solvate, C28H20Cl4N2O3·0.981CH2Cl2, (II), where the solvent component is disordered over three sets of atomic sites, these two rings adopt envelope and half-chair conformations, respectively. Molecules of (I) are linked by an O-H...·O hydrogen bond to form cyclic R66(48) hexamers of \overline{3} (S6) symmetry, which are further linked by two C-H...O hydrogen bonds to form a three-dimensional framework structure. In compound (II), inversion-related pairs of N-H...O hydrogen bonds link the spiro[indoline-3,3'-pyrrolizine] molecules into simple R22(8) dimers.

Reduced 3,4'-bipyrazoles from a simple pyrazole precursor: synthetic sequence, molecular structures and supramolecular assembly.

The reaction of 5-chloro-3-methyl-1-phenyl-1H-pyrazole-4-carbaldehyde and N-benzylmethylamine under microwave irradiation gives 5-[benzyl(methyl)amino]-3-methyl-1-phenyl-1H-pyrazole-4-carbaldehyde, C19H19N3O, (I). Subsequent reactions under basic conditions, between (I) and a range of acetophenones, yield the corresponding chalcones. These undergo cyclocondensation reactions with hydrazine to produce reduced bipyrazoles which can be N-formylated with formic acid or N-acetylated with acetic anhydride. The structures of (I) and of representative examples from this reaction sequence are reported, namely the chalcone (E)-3-{5-[benzyl(methyl)amino]-3-methyl-1-phenyl-1H-pyrazol-4-yl}-1-(4-bromophenyl)prop-2-en-1-one, C27H24BrN3O, (II), the N-formyl derivative (3RS)-5'-[benzyl(methyl)amino]-3'-methyl-1',5-diphenyl-3,4-dihydro-1'H,2H-[3,4'-bipyrazole]-2-carbaldehyde, C28H27N5O, (III), and the N-acetyl derivative (3RS)-2-acetyl-5'-[benzyl(methyl)amino]-5-(4-methoxyphenyl)-3'-methyl-1'-phenyl-3,4-dihydro-1'H,2H-[3,4'-bipyrazole], which crystallizes as the ethanol 0.945-solvate, C30H31N5O2·0.945C2H6O, (IV). There is significant delocalization of charge from the benzyl(methyl)amino substituent onto the carbonyl group in (I), but not in (II). In each of (III) and (IV), the reduced pyrazole ring is modestly puckered into an envelope conformation. The molecules of (I) are linked by a combination of C-H...N and C-H...π(arene) hydrogen bonds to form a simple chain of rings; those of (III) are linked by a combination of C-H...O and C-H...N hydrogen bonds to form sheets of R22(8) and R66(42) rings, and those of (IV) are linked by a combination of O-H...N and C-H...O hydrogen bonds to form a ribbon of edge-fused R24(16) and R44(24) rings.

Three tetracyclic dibenzoazepine derivatives exhibiting different molecular conformations, different patterns of intermolecular hydrogen bonding and different modes of supramolecular aggregation.

The biological potential of compounds of the tricyclic dibenzo[b,e]azepine system has resulted in considerable synthetic efforts to develop efficient methods for the synthesis of new derivatives of this kind. (9RS,15RS)-9-Ethyl-11-methyl-9,13b-dihydrodibenzo[c,f]thiazolo[3,2-a]azepin-3(2H)-one, C19H19NOS, (I), crystallizes as a kryptoracemate with Z' = 2 in the space group P21, with one molecule each of the (9R,15R) and (9S,15S) configurations in the asymmetric unit, while (9RS,15RS)-9-ethyl-7,12-dimethyl-9,13b-dihydrodibenzo[c,f]thiazolo[3,2-a]azepin-3(2H)-one, C20H21NOS, (II), crystallizes with Z' = 1 in the space group C2/c. Ethyl (13RS)-2-chloro-13-ethyl-4-oxo-8,13-dihydro-4H-benzo[5,6]azepino[3,2,1-ij]quinoline-5-carboxylate, C22H20ClNO3, (III), exhibits enantiomeric disorder in the space group P-1 such that the reference site is occupied by the 13R and 13S enantiomers, with occupancies of 0.900 (6) and 0.100 (6). In each of the two independent molecules in (I), the five-membered ring adopts an envelope conformation, but the corresponding ring in (II) adopts a half-chair conformation, while the six-membered ring in the major form of (III) adopts a twist-boat conformation. The conformation of the seven-membered ring in each of (I), (II) and the major form of (III) approximates to the twist-boat form. The molecules of compound (I) are linked by two C-H...O hydrogen bonds to form two independent antiparallel C(5) chains, with each type containing only one enantiomer. These chains are linked into sheets by two C-H...π(arene) hydrogen bonds, in which the two donors are both provided by the (9R,15R) enantiomer and the two acceptor arene rings form part of a molecule of (9S,15S) configuration, precluding any additional crystallographic symmetry. The molecules of compound (II) are linked by inversion-related C-H...π(arene) hydrogen bonds to form isolated cyclic centrosymmetric dimers. The molecules of compound (III) are linked into cyclic centrosymmetric dimers by C-H...O hydrogen bonds and these dimers are linked into chains by a π-π stacking interaction. Comparisons are made with some related structures.

Unexpected ring-closure products derived from 3-(2-allylanilino)-3-phenylacrylate esters: crystal and molecular structures of 3-acetyl-8-allyl-6-methyl-2-phenylquinolin-4-yl acetate and (2RS)-2,8-dimethyl-4-phenyl-1,2-dihydro-6H-pyrrolo[3,2,1-ij]quinolin-6-one.

The reactions of two 3-(2-allylanilino)-3-phenylacrylate esters with acetic anhydride and with strong acids has revealed a richly diverse reactivity providing a number of unexpected products. Thus, acetylation of ethyl 3-(2-allylanilino)-3-phenylacrylate, (Ia), or ethyl 3-(2-allyl-4-methylanilino)-3-phenylacrylate, (Ib), with acetic anhydride yields not only the expected acetylated esters, (II), as the major products but also the unexpected polysubstituted quinolines 3-acetyl-8-allyl-2-phenylquinolin-4-yl acetate, (IIIa), and 3-acetyl-8-allyl-6-methyl-2-phenylquinolin-4-yl acetate, (IIIb), as minor products. Subsequent reaction of the major product ethyl 2-[(2-allyl-4-methylanilino)(phenyl)methylidene]-3-oxobutanoate, (IIb), with concentrated sulfuric acid did not provide the expected 3-acetylquinoline derivative, but instead two unexpected products, namely ethyl 4-ethyl-2-phenyl-1,4-dihydroquinoline-3-carboxylate, (IV), and ethyl 3-acetyl-4-ethyl-2-phenyl-3,4-dihydroquinoline-3-carboxylate, (V), in yields of 39 and 22%, respectively. The reaction of (Ib) with Eaton's reagent gave both the quinoline (Z)-6-methyl-2-phenyl-8-(prop-1-en-1-yl)quinolin-4(1H)-one, (VI), and the unexpected tricyclic product (2RS)-2,8-dimethyl-4-phenyl-1,2-dihydro-6H-pyrrolo[3,2,1-ij]quinolin-6-one, (VII), in yields of 71 and 12%, respectively. The products (II)-(VII) have all been fully characterized spectroscopically and the crystal structures of two of the unexpected products, i.e. (IIIb) (C23H21NO3) and (VII) (C19H17NO), are reported here. The formation of compounds (IV), (V) and (VII) all require an isomerization of the initial allyl substituent, with migration of the C=C double bond from the terminal site to the internal site. In (IIIb), the two acetyl substituents are oriented such that the intramolecular distance between the two carbonyl O atoms is only 3.243 (2) Å, and in (VII), the five-membered ring adopts a twisted half-chair conformation. The molecules of compound (IIIb) are linked by two independent hydrogen bonds to form sheets built from R4(3)(20) rings and the sheets are linked by a π-π stacking interaction to form a three-dimensional framework structure. The molecules of compound (VII) are linked by a single type of C-H...O hydrogen bond to form centrosymmetric R2(2)(14) dimers. The molecules of compound (V), which crystallizes with Z' = 2, are linked by two N-H...O and two C-H...O hydrogen bonds, forming a chain of rings.