A Tripartite Complex HIV-1 Tat-Cyclophilin A-Capsid Protein Enables Tat Encapsidation That Is Required for HIV-1 Infectivity.

HIV-1 Tat is a key viral protein that stimulates several steps of viral gene expression. Tat is especially required for the transcription of viral genes. Nevertheless, it is still not clear if and how Tat is incorporated into HIV-1 virions. Cyclophilin A (CypA) is a prolyl isomerase that binds to HIV-1 capsid protein (CA) and is thereby encapsidated at the level of 200 to 250 copies of CypA/virion. Here, we found that a Tat-CypA-CA tripartite complex assembles in HIV-1-infected cells and allows Tat encapsidation into HIV virions (1 Tat/1 CypA). Biochemical and biophysical studies showed that high-affinity interactions drive the assembly of the Tat-CypA-CA complex that could be purified by size exclusion chromatography. We prepared different types of viruses devoid of transcriptionally active Tat. They showed a 5- to 10 fold decrease in HIV infectivity, and conversely, encapsidating Tat into ΔTat viruses greatly enhanced infectivity. The absence of encapsidated Tat decreased the efficiency of reverse transcription by ~50% and transcription by more than 90%. We thus identified a Tat-CypA-CA complex that enables Tat encapsidation and showed that encapsidated Tat is required to initiate robust viral transcription and thus viral production at the beginning of cell infection, before neosynthesized Tat becomes available. IMPORTANCE The viral transactivating protein Tat has been shown to stimulate several steps of HIV gene expression. It was found to facilitate reverse transcription. Moreover, Tat is strictly required for the transcription of viral genes. Although the presence of Tat within HIV virions would undoubtedly favor these steps and therefore enable the incoming virus to boost initial viral production, whether and how Tat is present within virions has been a matter a debate. We here described and characterized a tripartite complex between Tat, HIV capsid protein, and the cellular chaperone cyclophilin A that enables efficient and specific Tat encapsidation within HIV virions. We further showed that Tat encapsidation is required for the virus to efficiently initiate infection and viral production. This effect is mainly due to the transcriptional activity of Tat.

Correlative AFM and fluorescence imaging demonstrate nanoscale membrane remodeling and ring-like and tubular structure formation by septins.

Septins are ubiquitous cytoskeletal filaments that interact with the inner plasma membrane and are essential for cell division in eukaryotes. In cellular contexts, septins are often localized at micrometric Gaussian curvatures, where they assemble onto ring-like structures. The behavior of budding yeast septins depends on their specific interaction with inositol phospholipids, enriched at the inner leaflet of the plasma membrane. Septin filaments are built from the non-polar self-assembly of short rods into filaments. However, the molecular mechanisms regulating the interplay with the inner plasma membrane and the resulting interaction with specific curvatures are not fully understood. In this report, we have imaged dynamical molecular assemblies of budding yeast septins on PIP2-containing supported lipid bilayers using a combination of high-speed AFM and correlative AFM-fluorescence microscopy. Our results clearly demonstrate that septins are able to bind to flat supported lipid bilayers and thereafter induce the remodeling of membranes. Short septin rods (octamers subunits) can indeed destabilize supported lipid bilayers and reshape the membrane to form 3D structures such as rings and tubes, demonstrating that long filaments are not necessary for septin-induced membrane buckling.

TAT-RasGAP317-326 kills cells by targeting inner-leaflet-enriched phospholipids.

TAT-RasGAP317-326 is a cell-penetrating peptide-based construct with anticancer and antimicrobial activities. This peptide kills a subset of cancer cells in a manner that does not involve known programmed cell death pathways. Here we have elucidated the mode of action allowing TAT-RasGAP317-326 to kill cells. This peptide binds and disrupts artificial membranes containing lipids typically enriched in the inner leaflet of the plasma membrane, such as phosphatidylinositol-bisphosphate (PIP2) and phosphatidylserine (PS). Decreasing the amounts of PIP2 in cells renders them more resistant to TAT-RasGAP317-326, while reducing the ability of cells to repair their plasma membrane makes them more sensitive to the peptide. The W317A TAT-RasGAP317-326 point mutant, known to have impaired killing activities, has reduced abilities to bind and permeabilize PIP2- and PS-containing membranes and to translocate through biomembranes, presumably because of a higher propensity to adopt an α-helical state. This work shows that TAT-RasGAP317-326 kills cells via a form of necrosis that relies on the physical disruption of the plasma membrane once the peptide targets specific phospholipids found on the cytosolic side of the plasma membrane.

Imaging Artificial Membranes Using High-Speed Atomic Force Microscopy.

Supported lipid bilayers represent a very attractive way to mimic biological membranes, especially to investigate molecular mechanisms associated with the lateral segregation of membrane components. Observation of these model membranes with high-speed atomic force microscopy (HS-AFM) allows the capture of both topography and dynamics of membrane components, with a spatial resolution in the nanometer range and image capture time of less than 1 s. In this context, we have developed new protocols adapted for HS-AFM to form supported lipid bilayers on small mica disks using the vesicle fusion or Langmuir-Blodgett methods. In this chapter we describe in detail the protocols to fabricate supported artificial bilayers as well as the main guidelines for HS-AFM imaging of such samples.

Mimicking influenza virus fusion using supported lipid bilayers.

Influenza virus infection is a serious public health problem in the world, and understanding the molecular mechanisms involved in viral replication is crucial. In this paper, we used a minimalist approach based on a lipid bilayer supported on mica, which we imaged by atomic force microscopy (AFM) in a physiological buffer, to analyze the different steps of influenza fusion, from the interaction of intact viruses with the supported bilayer to their complete fusion. Our results show that sialic acid recognition and priming upon acidification are sufficient for a complete fusion with the host cell membrane. After fusion, a flat and continuous membrane was observed. Because of the fragility of the viral membrane that was removed by the tip, most probably due to the disorganization of the matrix layer at acidic pH, fine structural details of ribonucleoproteins (RNP) were obtained. In addition, AFM topography of intact virus in interaction with the supported lipid bilayer confirms that hemeagglutinin and neuraminidase can form isolated clusters within the viral membrane.

Milk sphingomyelin domains in biomimetic membranes and the role of cholesterol: morphology and nanomechanical properties investigated using AFM and force spectroscopy.

Milk sphingomyelin (MSM) and cholesterol segregate into domains in the outer bilayer membrane surrounding milk fat globules. To elucidate the morphology and mechanical properties of theses domains, supported lipid bilayers with controlled molar proportions of MSM, dioleoylphosphatidylcholine (DOPC) and cholesterol were produced in buffer mimicking conditions of the milk aqueous phase. Atomic force microscopy imaging showed that (i) for T < 35 °C MSM segregated in gel phase domains protruding above the fluid phase, (ii) the addition of 20 mol % cholesterol resulted in smaller and more elongated l(o) phase domains than in equimolar MSM/DOPC membranes, (iii) the MSM/cholesterol-enriched l(o) phase domains were less salient than the MSM gel phase domains. Force spectroscopy measurements furthermore showed that cholesterol reduced the resistance of MSM/DOPC membrane to perforation. The results are discussed with respect to the effect of cholesterol on the biophysical properties of lipid membranes. The combination of AFM imaging and force mapping provides unprecedented insight into the structural and mechanical properties of milk lipid membranes, and opens perspectives for investigation of the functional properties of MSM domains during milk fat processing or digestion.

Structure and DNA-binding properties of the Bacillus subtilis SpoIIIE DNA translocase revealed by single-molecule and electron microscopies.

SpoIIIE/FtsK are a family of ring-shaped, membrane-anchored, ATP-fuelled motors required to segregate DNA across bacterial membranes. This process is directional and requires that SpoIIIE/FtsK recognize highly skewed octameric sequences (SRS/KOPS for SpoIIIE/FtsK) distributed along the chromosome. Two models have been proposed to explain the mechanism by which SpoIIIE/FtsK interact with DNA. The loading model proposes that SpoIIIE/FtsK oligomerize exclusively on SpoIIIE recognition sequence/orienting polar sequences (SRS/KOPS) to accomplish directional DNA translocation, whereas the target search and activation mechanism proposes that pre-assembled SpoIIIE/FtsK hexamers bind to non-specific DNA, reach SRS/KOPS by diffusion/3d hopping and activate at SRS/KOPS. Here, we employ single-molecule total internal reflection imaging, atomic force and electron microscopies and ensemble biochemical methods to test these predictions and obtain further insight into the SpoIIIE-DNA mechanism of interaction. First, we find that SpoIIIE binds DNA as a homo-hexamer with neither ATP binding nor hydrolysis affecting the binding mechanism or affinity. Second, we show that hexameric SpoIIIE directly binds to double-stranded DNA without requiring the presence of SRS or free DNA ends. Finally, we find that SpoIIIE hexamers can show open and closed conformations in solution, with open-ring conformations most likely resembling a state poised to load to non-specific, double-stranded DNA. These results suggest how SpoIIIE and related ring-shaped motors may be split open to bind topologically closed DNA.

Interaction of antibiotics with lipid vesicles on thin film porous silicon using reflectance interferometric Fourier transform spectroscopy.

The ability to observe interactions of drugs with cell membranes is an important area in pharmaceutical research. However, these processes are often difficult to understand due to the dynamic nature of cell membranes. Therefore, artificial systems composed of lipids have been used to study membrane properties and their interaction with drugs. Here, lipid vesicle adsorption, rupture, and formation of planar lipid bilayers induced by various antibiotics (surfactin, azithromycin, gramicidin, melittin and ciprofloxacin) and the detergent dodecyl-b-D-thiomaltoside (DOTM) was studied using reflective interferometric Fourier transform spectroscopy (RIFTS) on an oxidized porous silicon (pSi) surface as a transducer. The pSi transducer surfaces are prepared as thin films of 3 µm thickness with pore dimensions of a few nanometers in diameter by electrochemical etching of crystalline silicon followed by passivation with a thermal oxide layer. Furthermore, the sensitivity of RIFTS was investigated using three different concentrations of surfactin. Complementary techniques including atomic force microscopy, fluorescence recovery after photobleaching, and fluorescence microscopy were used to validate the RIFTS-based method and confirm adsorption and consequent rupture of vesicles to form a phospholipid bilayer upon the addition of antibiotics. The method provides a sensitive and real-time approach to monitor the antibiotic-induced transition of lipid vesicles to phospholipid bilayers.

SpoIIIE mechanism of directional translocation involves target search coupled to sequence-dependent motor stimulation.

SpoIIIE/FtsK are membrane-anchored, ATP-fuelled, directional motors responsible for chromosomal segregation in bacteria. Directionality in these motors is governed by interactions between specialized sequence-recognition modules (SpoIIIE-γ/FtsK-γ) and highly skewed chromosomal sequences (SRS/KOPS). Using a new combination of ensemble and single-molecule methods, we dissect the series of steps required for SRS localization and motor activation. First, we demonstrate that SpoIIIE/DNA association kinetics are sequence independent, with binding specificity being uniquely determined by dissociation. Next, we show by single-molecule and modelling methods that hexameric SpoIIIE binds DNA non-specifically and finds SRS by an ATP-independent target search mechanism, with ensuing oligomerization and binding of SpoIIIE-γ to SRS triggering motor stimulation. Finally, we propose a new model that provides an entirely new interpretation of previous observations for the origin of SRS/KOPS-directed translocation by SpoIIIE/FtsK.

Transfer on hydrophobic substrates and AFM imaging of membrane proteins reconstituted in planar lipid bilayers.

The lipid-layer technique allows reconstituting transmembrane proteins at a high density in microns size planar membranes and suspended to a lipid monolayer at the air/water interface. In this paper, we transferred these membranes onto two hydrophobic substrates for further structural analysis of reconstituted proteins by Atomic Force Microscopy (AFM). We used a mica sheet covered by a lipid monolayer or a sheet of highly oriented pyrolytic graphite (HOPG) to trap the lipid monolayer at the interface and the suspended membranes. In both cases, we succeeded in the transfer of large membrane patches containing densely packed or 2D-crystallized proteins. As a proof of concept, we transferred and imaged the soluble Shiga toxin bound to its lipid ligand and the ATP-binding cassette (ABC) transporter BmrA reconstituted into a planar bilayer. AFM imaging with a lateral resolution in the nanometer range was achieved. Potential applications of this technique in structural biology and nanobiotechnology are discussed.

Nanoscale topography of hepatitis B antigen particles by atomic force microscopy.

Hepatitis B virus envelope is mainly composed of three forms of the same protein expressed from different start codons of the same open reading frame. The smaller form named S protein corresponds to the C-terminal common region and represents about 80% of the envelope proteins. It is mainly referred as hepatitis B virus surface antigen (HBsAg). Over expressed in the host cell, this protein can be produced as spherical and tubular self-organized particles. Highly immunogenic, these particles are used in licensed hepatitis B vaccines. In this study we have combined transmission electron microscopy and atomic force microscopy to determine the shape and size of HBsAg particles produced from the yeast Hansenula polymorpha. Tapping mode atomic force microscopy in liquid allows structural details of the surface to be delineated with a resolution in the nanometer range. Particles were decorated by closely packed spike-like structures protruding from particle surface. Protrusions appeared uniformly distributed at the surface and an average number of 75 protrusions per particle were calculated. Importantly, we demonstrated that proteins mainly contribute to the topography of the protrusions.