RESUMEN
INTRODUCTION: The handheld dynamometer has been validated to measure muscle strength in different muscle groups. However, to date, it has not been tested in individuals who experience pain induced by hip osteoarthritis. The current study aimed to evaluate the intra- and inter-rater reliability, agreement, and minimal detectable change of the Lafayette handheld dynamometer, model 1165, to assess the peak force (Pk) and average peak force (Af) of hip muscles in individuals with symptomatic hip osteoarthritis. METHODS: Twenty participants with hip osteoarthritis (mean ± SD age: 58.7±15.3 years; body mass index: 28.8±4.2 kg/m2) and pain intensity on the Visual Analogue Scale ≥ 4 (8.05±1.2) were recruited to participate in this study. Pk and Af of hip flexors (seated position), abductors and adductors (supine position), and extensors (prone position) were collected in a single day by two independent raters, each one obtaining test and retest in randomly ordered separate sessions. RESULTS: The intra-rater intraclass correlation coefficient (ICC) was classified as good (>0.75) or excellent (≥0.90) for all muscle groups and all inter-rater ICCs were classified as excellent. Rater A had a lower standard error of measurement compared to rater B, ranging from 0.15 to 0.58 kilogram-force (Kgf) compared with 0.34 to 1.25 kg, respectively. However, the inter-rater comparison showed a minimal detectable change (MDC) of < 10% for all Pk and Af measures for hip adductors and extensors. Finally, the inter-rater Bland-Altman analysis demonstrated good agreement for abductors, adductors, and extensors. CONCLUSION: Despite pain and dysfunction related to hip osteoarthritis, the mean of two measures using a handheld dynamometer was shown to be a reliable tool to assess hip muscle strength, with good to excellent intra- and inter-rater ICCs, satisfactory agreement, and small values for MDC.
Asunto(s)
Osteoartritis de la Cadera , Adulto , Anciano , Humanos , Persona de Mediana Edad , Fuerza Muscular/fisiología , Dinamómetro de Fuerza Muscular , Músculo Esquelético/fisiología , Reproducibilidad de los ResultadosRESUMEN
Objective The present study aims to analyze the intra- and interobserver reproducibility of the Lauge-Hansen, Danis-Weber, and Arbeitsgemeinschaft für Osteosynthesefragen (AO) classifications for ankle fractures, and the influence of evaluators training stage in these assessments. Methods Anteroposterior (AP), lateral and true AP radiographs from 30 patients with ankle fractures were selected. All images were evaluated by 11 evaluators at different stages of professional training (5 residents and 6 orthopedic surgeons), at 2 different times. Intra- and interobserver agreement was analyzed using the weighted Kappa coefficient. Student t-tests for paired samples were applied to detect significant differences in the degree of interobserver agreement between instruments. Results Intraobserver analysis alone had a significant agreement in all classifications. Moderate to excellent interobserver agreement was highly significant ( p ≤ 0.0001) for the Danis-Weber classification. The Danis-Weber classification showed, on average, a significantly higher degree of agreement than the remaining classification systems ( p ≤ 0.0001). Conclusion The Danis-Weber classification presented the highest reproducibility among instruments and the evaluator's little experience had no negative influence on the reproducibility of ankle fracture classifications. Level of Evidence II, Diagnostic Studies - Investigating a Diagnostic Test .
RESUMEN
Objective The present study aims to identify the energy required for synthetic proximal femoral fracture after removal of three implant types: cannulated screws, dynamic hip screws (DHS), and proximal femoral nail (PFN). Methods Twenty-five synthetic proximal femur bones were used: 10 were kept intact as the control group (CG), 5 were submitted to the placement and removal of 3 cannulated screws in an inverted triangle configuration (CSG), 5 were submitted to the placement and removal of a dynamic compression screw (DHSG), and 5 were submitted to the placement and removal of a proximal femur nail (PFNG). All samples were biomechanically analyzed simulating a fall on the greater trochanter using a servo-hydraulic machine to determine the energy (in Joules [J]) required for fracture. Results All samples presented basicervical fractures. The energy required for fracture was 7.1 J, 6.6 J, 6 J, and 6.7 J for the CG, CSG, DHSG and PFNG, respectively. There was no statistically significant difference (considering a 95% confidence interval) in energy among the study groups ( p = 0.34). Conclusion There was no statistically significant difference in the energy required to cause a synthetic proximal femoral fracture after removing all three implant types and simulating a fall over the greater trochanter.
RESUMEN
Abstract Objective The present study aims to analyze the intra- and interobserver reproducibility of the Lauge-Hansen, Danis-Weber, and Arbeitsgemeinschaft für Osteosynthesefragen (AO) classifications for ankle fractures, and the influence of evaluators training stage in these assessments. Methods Anteroposterior (AP), lateral and true AP radiographs from 30 patients with ankle fractures were selected. All images were evaluated by 11 evaluators at different stages of professional training (5 residents and 6 orthopedic surgeons), at 2 different times. Intra- and interobserver agreement was analyzed using the weighted Kappa coefficient. Student t-tests for paired samples were applied to detect significant differences in the degree of interobserver agreement between instruments. Results Intraobserver analysis alone had a significant agreement in all classifications. Moderate to excellent interobserver agreement was highly significant (p ≤ 0.0001) for the Danis-Weber classification. The Danis-Weber classification showed, on average, a significantly higher degree of agreement than the remaining classification systems (p ≤ 0.0001). Conclusion The Danis-Weber classification presented the highest reproducibility among instruments and the evaluator's little experience had no negative influence on the reproducibility of ankle fracture classifications. Level of Evidence II, Diagnostic Studies - Investigating a Diagnostic Test.
Resumo Objetivo Avaliar a reprodutibilidade intra- e interobservador das classificações de Lauge-Hansen, Danis-Weber e Arbeitsgemeinschaft für Osteosynthesefragen (AO) para as fraturas de tornozelo, e a influência do estágio de formação dos participantes na avaliação. Métodos Foram selecionadas radiografias de 30 pacientes com fratura de tornozelo nas incidências anteroposterior (AP), perfil e AP verdadeiro. Todas as imagens foram avaliadas por 11 participantes em diferentes estágios de formação profissional (cinco residentes e seis cirurgiões ortopédicos), em dois momentos distintos. Analisou-se a concordância inter- e intraobservador por meio do coeficiente Kappa ponderado. O teste t de Student para amostras pareadas foi aplicado para verificar se havia diferença significativa no grau de concordância interobservador entre os instrumentos. Resultado Observou-se que existe concordância significativa em todas as classificações quando da análise intraobservador isolada. Existe concordância interobservador altamente significativa de grau moderado a ótimo na classificação de Danis-Weber (p ≤ 0,0001). A classificação de Danis-Weber apresentou, em média, grau de concordância significativamente maior que as outras classificações (p ≤ 0,0001). Conclusão A classificação de Danis-Weber se mostrou a mais reprodutiva entre os instrumentos avaliados, e a pouca experiência do avaliador não influencia negativamente a reprodutibilidade das classificações das fraturas do tornozelo. Nível de Evidência II, Estudos Diagnósticos - Investigação de um Exame para Diagnóstico.
Asunto(s)
Humanos , Reproducibilidad de los Resultados , Pruebas Diagnósticas de Rutina , Fracturas Óseas , Fracturas de Tobillo/clasificación , Cirujanos OrtopédicosRESUMEN
Abstract Objective The present study aims to identify the energy required for synthetic proximal femoral fracture after removal of three implant types: cannulated screws, dynamic hip screws (DHS), and proximal femoral nail (PFN). Methods Twenty-five synthetic proximal femur bones were used: 10 were kept intact as the control group (CG), 5 were submitted to the placement and removal of 3 cannulated screws in an inverted triangle configuration (CSG), 5 were submitted to the placement and removal of a dynamic compression screw (DHSG), and 5 were submitted to the placement and removal of a proximal femur nail (PFNG). All samples were biomechanically analyzed simulating a fall on the greater trochanter using a servo-hydraulic machine to determine the energy (in Joules [J]) required for fracture. Results All samples presented basicervical fractures. The energy required for fracture was 7.1 J, 6.6 J, 6 J, and 6.7 J for the CG, CSG, DHSG and PFNG, respectively. There was no statistically significant difference (considering a 95% confidence interval) in energy among the study groups (p = 0.34). Conclusion There was no statistically significant difference in the energy required to cause a synthetic proximal femoral fracture after removing all three implant types and simulating a fall over the greater trochanter.
Resumo Objetivo Identificar a energia necessária para ocorrência de fratura do fêmur proximal em osso sintético após retirada de três modelos de implantes: parafusos canulados, parafuso dinâmico do quadril (dynamic hip screw-DHS) e haste femoral proximal (proximal femoral nail-PFN). Métodos Foram utilizados 25 modelos de ossos sintéticos da extremidade proximal do fêmur: 10 unidades de grupo controle (GC), 5 unidades após colocação e retirada de 3 parafusos canulados colocados em configuração de triângulo invertido (GPC), 5 unidades após colocação e retirada do parafuso de compressão dinâmico (GDHS), e 5 unidades após colocação e retirada da haste de fêmur proximal (GPFN). Uma análise biomecânica foi realizada em todas as amostras simulando uma queda sobre o grande trocânter utilizando uma máquina servo-hidráulica com o objetivo de verificar a energia (em Joules [J]) necessária até a ocorrência de fratura nos diferentes grupos. Resultados Todos os grupos apresentaram fratura basocervical. Os grupos GC, GPC, GDHS e GPFN apresentaram, respectivamente, valores de 7.1J, 6.6J, 6J e 6.7J de energia até ocorrência da fratura. Não houve diferença estatisticamente significativa (intervalo de confiança de 95%) na energia entre os grupos de estudo (p = 0,34). Conclusão Não houve diferença estatisticamente significativa nos valores de energia necessária para ocorrência de fratura da extremidade proximal do fêmur após a retirada de três tipos de implantes utilizando modelos sintéticos simulando queda sobre o grande trocânter.