Structure, mechanical and adhesive properties of the cellulosic mucilage in Ocimum basilicum seeds.

Plant seeds and fruits, like those of Ocimum basilicum, develop a mucilaginous envelope rich in pectins and cellulosic fibers upon hydration. This envelope promotes adhesion for attachment to soils and other substrates for dispersal and protection of the seed for a safe germination. Initially at hydration, the mucilage envelope demonstrates low adhesion and friction, but shows increasing adhesive and frictional properties during dehydration. However, the mechanisms underlying the cellulose fiber arrangement and the mechanical properties, especially the elasticity modulus of the mucilage envelope at different hydration conditions are not fully known. In this study, which is based on scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM) and light microscopy, the structure of the seed coat and arrangement of the cellulose fibers of basil seeds were characterized. Moreover, we performed pull-off force measurements to estimate adhesive properties and JKR-tests to estimate E-modulus of the mucilage at different hydration levels. Microscopy results demonstrate that cellulose fibers are split at their free ends into smaller fibrils, which might enhance the adhesive properties of the mucilage. Adhesive forces in contact increased during dehydration and reached maximum of 33 mN shortly before complete dehydration. The E-modulus of the mucilage changed from 1.4 KPa in water to up to 2.1 MPa in the mucilage at the maximum of its adhesion performance. Obtained results showed hydrogel-like mechanical properties during dehydration and cellulose fiber structures similar to the nanofibrous systems in other organisms with strong adhesive properties. STATEMENT OF SIGNIFICANCE: This paper reveals the hierarchical cellulose fiber structure in Ocimum basilicum's mucilaginous seed coat, suggesting increased fiber splitting towards the end, potentially enhancing adhesion contact areas. Mechanical tests explore elasticity modulus and adhesion force during various hydration stages, crucial as these properties evolve with mucilage desiccation. A rare focus on mucilaginous seed coat mechanical properties, particularly cellulose-reinforced fibers, provides insight into the hydrogel-like mucilage of plant seeds. Adhesion forces peak just before complete desiccation and then decline rapidly. As mucilage water content decreases, the E-modulus rises, displaying hydrogel-like properties during early dehydration stages with higher water content. This study might bring the focus to plant seeds as inspiration for biodegradable glues and applications for hydrogel research.

Interleg coordination in free-walking bug Erthesina fullo (Hemiptera: Pentatomidae).

Insects can adapt their walking patterns to complex and varied environments and retain the ability to walk even after significant changes in their physical attributes, such as amputation. Although the interleg coordination of intact insects has been widely described in previous studies, the adaptive walking patterns in free-walking insects with amputation of 1 or more legs are still unclear. The pentatomid bug Erthesina fullo exhibits a tripod gait, when walking freely on horizontal substrates, like many other insects. In this study, amputations were performed on this species to investigate changes in interleg coordination. The walking parameters were analyzed, such as the locations of touchdown and liftoff, cycle period, walking speed, and head displacement of intact and amputated insects. The results show that E. fullo displays adaptive interleg coordination in response to amputations. With 1 amputated leg, bugs changed to a 3-unit gait, whereas with 2 amputated legs they employed a wave gait. These data are helpful in exploring the motion mode control in walking insects and provide the theoretical basis for the gait control strategy of robots, when leg failure occurs.

Comparative analysis of the ultrastructure and adhesive secretion pathways of different smooth attachment pads of the stick insect Medauroidea extradentata (Phasmatodea).

The mechanism by which insects achieve attachment and locomotion across diverse substrates has long intrigued scientists, prompting extensive research on the functional morphology of attachment pads. In stick insects, attachment and locomotion are facilitated by two distinct types of smooth cuticular attachment pads: the primary adhesion force-generating arolium and the friction force-generating euplantulae. They are both supported by an adhesive secretion delivered into the interspace between the attachment pads and the substrate. In this study, we analysed and compared internal morphology, material composition and ultrastructure, as well as the transportation pathways in both adhesive organs in the stick insect Medauroidea extradentata using scanning electron microscopy, micro-computed tomography, light microscopy, and confocal laser scanning microscopy. Our observations revealed structural differences between both attachment pads, reflecting their distinct functionality. Furthermore, our results delineate a potential pathway for adhesive secretions, originating from exocrine epidermal cells and traversing various layers before reaching the surface. Within the attachment pad, the fluid may influence the viscoelastic properties of the pad and control the attachment/detachment process. Understanding the material composition of attachment pads and the distribution process of the adhesive secretion can potentially aid in the development of more effective artificial attachment systems.

Performance of biological food processing interfaces: Perspectives on the science of mollusc radula.

The Mollusca comprises a diverse range of organisms, with the class Gastropoda alone boasting approximately 80 000 extant species. Their adaptability across various habitats is facilitated by the evolution of the radula, a key structure for food acquisition. The radula's composition and mechanical properties, including its chitinous membrane, teeth, and supporting structures, enable efficient food gathering and processing. Through adaptive tooth morphology and composition, an interplay between radular components is facilitated, which results in collective effects to withstand forces encountered during feeding and reduce structural failure, with the broad range of variations reflecting ecological niches. Furthermore, teeth consist of composite materials with sometimes high contents of iron, calcium, or silicon to reduce wear. During interaction with the food, the radula performs complex three-dimensional motions, challenging to document. Here, we provide a review on the morphology, the mechanical properties, the composition, and various other parameters that contribute to radular performance. Due to, e.g., the smallness of these structures, there are, however, limitations to radular research. However, numerical simulations and physical models tested on substrates offer avenues for further understanding radular function and performance during feeding. These studies not only advance our knowledge of molluscan biology and ecology but also provide inspirations for biomimetic design and further advances in materials engineering.

The puncture mechanics: an example from the bed bug Cimex lectularius showing traumatic insemination using the paramere.

Cimicidae are well-known for traumatic insemination, and males pierce females with their parameres and transfer sperm through them. The shape of parameres is relatively stable in the family, but in some genera, the paramere is elongated, appearing less resistant against lateral deflection. To understand the mechanical limitations of the paramere, we studied its penetration mechanics of the common bed bug, Cimex lectularius. We examined the post-abdominal morphology, paramere geometry and material properties and conducted breaking stress experiments on the paramere under wet and dry conditions. Mechanical property gradients are present with the paramere tip as the stiffest region and the base as the most flexible one. These mechanical properties relate to the presence of Ca, Zn and Si. The basal wing-shaped structure is flexible, enabling it to interlock with the anal region during mating. The paramere is slightly twisted; the tip region is circular in cross-section, and the geometry of the rest is rather complex. In the mechanical tests, wet parameres mainly buckled, while dried parameres broke off. The level of structural failures depended on directions from which the compression forces were applied. Structural, material and mechanical strengthening mechanisms preventing the paramere from mechanical failure are discussed.

Application of Recurrence Plot Analysis to Examine Dynamics of Biological Molecules on the Example of Aggregation of Seed Mucilage Components.

The goal of the research is to describe the aggregation process inside the mucilage produced by plant seeds using molecular dynamics (MD) combined with time series algorithmic analysis based on the recurrence plots. The studied biological molecules model is seed mucilage composed of three main polysaccharides, i.e. pectins, hemicellulose, and cellulose. The modeling of biological molecules is based on the assumption that a classical-quantum passage underlies the aggregation process in the mucilage, resulting from non-covalent interactions, as they affect the macroscopic properties of the system. The applied recurrence plot approach is an important tool for time series analysis and data mining dedicated to analyzing time series data originating from complex, chaotic systems. In the current research, we demonstrated that advanced algorithmic analysis of seed mucilage data can reveal some features of the dynamics of the system, namely temperature-dependent regions with different dynamics of increments of a number of hydrogen bonds and regions of stable oscillation of increments of a number of hydrophobic-polar interactions. Henceforth, we pave the path for automatic data-mining methods for the analysis of biological molecules with the intermediate step of the application of recurrence plot analysis, as the generalization of recurrence plot applications to other (biological molecules) datasets is straightforward.

Tree frogs (Polypedates dennysi) landing on horizontal perches: the effects of perch diameter.

Secure landing is indispensable for both leaping animals and robotics. Tree frogs, renowned for their adhesive capabilities, can effectively jump across intricate 3D terrain and land safely. Compared with jumping, the mechanisms underlying their landing technique, particularly in arboreal environments, have remained largely unknown. In this study, we focused on the landing patterns of the tree frog Polypedates dennysi on horizontally placed perches, explicitly emphasizing the influence of perch diameters. Tree frogs demonstrated diverse landing postures, including the utilization of: (1) single front foot, (2) double front feet, (3) anterior bellies, (4) middle bellies, (5) posterior bellies, (6) single hind foot, or (5) double hind feet. Generally, tree frogs favoured bellies on slimmer targets but double front feet on large perches. Analysis of limb-trunk relationships revealed their adaptability to modify postures, including body positions and limb orientations, for successful landing. The variations in the initial landing postures affected the subsequent landing procedures and, consequently, the dynamics. As the initial contact position switched from front foot back to the hind foot, the stabilization time decreased at first, reaching a minimum in middle belly landings, and then increased again. The maximum vertical forces showed an inverse trend, whereas the maximum fore-aft forces continuously increased as the initial contact position switched. As the perch diameter increased, the time expended dropped, whereas the maximum impact force increased. These findings not only add to our understanding of frog landings but also highlight the necessity of considering perch diameters and landing styles when studying the biomechanics of arboreal locomotion.

Optimization of Enzymatic and Chemical Decellularization of Native Porcine Heart Valves for the Generation of Decellularized Xenografts.

One of the most important medical interventions for individuals with heart valvular disease is heart valve replacement, which is not without substantial challenges, particularly for pediatric patients. Due to their biological properties and biocompatibility, natural tissue-originated scaffolds derived from human or animal sources are one type of scaffold that is widely used in tissue engineering. However, they are known for their high potential for immunogenicity. Being free of cells and genetic material, decellularized xenografts, consequently, have low immunogenicity and, thus, are expected to be tolerated by the recipient's immune system. The scaffold ultrastructure and ECM composition can be affected by cell removal agents. Therefore, applying an appropriate method that preserves intact the structure of the ECM plays a critical role in the final result. So far, there has not been an effective decellularization technique that preserves the integrity of the heart valve's ultrastructure while securing the least amount of genetic material left. This study demonstrates a new protocol with untraceable cells and residual DNA, thereby maximally reducing any chance of immunogenicity. The mechanical and biochemical properties of the ECM resemble those of native heart valves. Results from this study strongly indicate that different critical factors, such as ionic detergent omission, the substitution of Triton X-100 with Tergitol, and using a lower concentration of trypsin and a higher concentration of DNase and RNase, play a significant role in maintaining intact the ultrastructure and function of the ECM.

Streptomyces profundus sp. nov., a novel marine actinobacterium isolated from deep-sea sediment of Madeira Archipelago, Portugal.

A novel strain, MA3_2.13T, was isolated from deep-sea sediment of Madeira Archipelago, Portugal, and characterized using a polyphasic approach. This strain produced dark brown soluble pigments, bronwish black substrate mycelia and an aerial mycelium with yellowish white spores, when grown on GYM 50SW agar. The main respiratory quinones were MK-10(H4), MK-10(H6) and MK-10(H8). Diphosphatidylglycerol, phosphatidylethanolamine, three unidentified phospholipids and two glycophospholipids were identified as the main phospholipids. The major cellular fatty acids were iso-C16 : 1, iso-C16 : 0, anteiso-C17 : 1 and anteiso-C17 : 0. Phylogenetic analyses based on 16S rRNA gene showed that strain MA3_2.13T is a member of the genus Streptomyces and was most closely related to Streptomyces triticirhizae NEAU-YY642T (NR_180032.1; 16S rRNA gene similarity 97.9 %), Streptomyces sedi YIM 65188T (NR_044582.1; 16S rRNA gene similarity 97.4 %), Streptomyces mimosae 3MP-10T (NR_170412.1; 16S rRNA gene similarity 97.3 %) and Streptomyces zhaozhouensis NEAU-LZS-5T (NR_133874.1; 16S rRNA gene similarity 97.0 %). Genome pairwise comparisons with closest related type strains retrieved values below the threshold for species delineation suggesting that strain MA3_2.13T represents a new branch within the genus Streptomyces. Based on these results, strain MA3_2.13T (=DSM 115980T=LMG 33094T) is proposed as the type strain of a novel species of the genus Streptomyces, for which the name Streptomyces profundus sp. nov. is proposed.

Mandible elemental composition and mechanical properties from distinct castes of the leafcutter ant Atta laevigata (Attini; Formicidae).

Leafcutter ant colonies are divided into castes with the individuals performing different tasks, based mostly on size. With the mandibles, the small minims care for the brood or the fungus, whereas the larger minors and mediae cut and transport plant material, with the ant size positively related to the material size. The mechanical properties and composition of the mandible cuticle have been previously tested in the soldiers as the largest caste, revealing that the cutting edges contained high contents of the cross-linking transition metal zinc (Zn). With regard to the smaller castes, no data are present. To study how the mandible size and function relates to its mechanical properties, we here tested the mandibles of minims, minors and mediae by nanoindentation. We found that the hardness (H) and Young's modulus (E) values increased with increasing ant size and that the mandible cutting edges in each caste have the highest H- and E-values. To gain insight into the origins of these properties, we characterized the elemental composition by energy-dispersive X-ray analysis, revealing that minors and mediae possessed higher content of Zn in the cutting edges in contrast to the minims containing significantly less Zn. This shows, that Zn content relates to higher mechanical property values. Additionally, it shows that all of these parameters can differ within a single species.

Tanning of the tarsal and mandibular cuticle in adult Anax imperator (Insecta: Odonata) during the emergence sequence.

The arthropod cuticle offers strength, protection, and lightweight. Due to its limit in expandability, arthropods have to moult periodically to grow. While moulting is beneficial in terms of parasite or toxin control, growth and adaptation to environmental conditions, it costs energy and leaves the soft animal's body vulnerable to injuries and desiccation directly after ecdysis. To investigate the temporal change in sclerotization and pigmentation during and after ecdysis, we combined macrophotography, confocal laser scanning microscopy, scanning electron microscopy and histological sectioning. We analysed the tarsal and mandibular cuticle of the blue emperor dragonfly to compare the progress of tanning for structures that are functionally involved during emergence (tarsus/tarsal claws) with structures whose functionality is required much later (mandibles). Our results show that: (i) the tanning of the tarsal and mandibular cuticle increases during emergence; (ii) the tarsal cuticle tans faster than the mandibular cuticle; (iii) the mandibles tan faster on the aboral than on the oral side; and (iv) both the exo- and the endocuticle are tanned. The change in the cuticle composition of the tarsal and mandibular cuticle reflects the demand for higher mechanical stability of these body parts when holding on to the substrate during emergence and during first walking or hunting attempts.

Mechanical and elemental characterization of ant mandibles: consequences for bite mechanics.

Mandible morphology has an essential role in biting performance, but the mandible cuticle can have regional differences in its mechanical properties. The effects of such a heterogeneous distribution of cuticle material properties in the mandible responses to biting loading are still poorly explored in chewing insects. Here, we tested the mechanical properties of mandibles of the ant species Formica cunicularia by nanoindentation and investigated the effects of the cuticular variation in Young's modulus (E) under bite loading with finite-element analysis (FEA). The masticatory margin of the mandible, which interacts with the food, was the hardest and stiffest region. To unravel the origins of the mechanical property gradients, we characterized the elemental composition by energy-dispersive X-ray spectroscopy. The masticatory margin possessed high proportions of Cu and Zn. When incorporated into the FEA, variation in E effectively changed mandible stress patterns, leading to a relatively higher concentration of stresses in the stiffer mandibular regions and leaving the softer mandible blade with relatively lower stress. Our results demonstrated the relevance of cuticle E heterogeneity in mandibles under bite loading, suggesting that the accumulation of transition metals such as Cu and Zn has a relevant correlation with the mechanical characteristics in F. cunicularia mandibles.

Wear patterns of radular teeth in Loligo vulgaris (Cephalopoda; Mollusca) are related to their structure and mechanical properties.

Radular teeth have to cope with wear, when interacting with ingesta. In some molluscan taxa, wear-coping mechanisms, related to the incorporation of high contents of iron or silica, have been previously determined. For most species, particularly for those which possess radulae without such incorporations, wear-coping mechanisms are understudied. In the present study, we documented and characterized the wear on radular teeth in the model species Loligo vulgaris (Cephalopoda). By applying a range of methods, the elementary composition and mechanical properties of the teeth were described, to gain insight into mechanisms for coping with abrasion. It was found that the tooth regions that are prone to wear are harder and stiffer. Additionally, the surfaces interacting with the ingesta possessed a thin coating with high contents of silicon, probably reducing abrasion. The here presented data may serve as an example of systematic study of radular wear, in order to understand the relationship between the structure of radular teeth and their properties.

Insect attachment on waxy plant surfaces: the effect of pad contamination by different waxes.

This study focuses on experimental testing of the contamination hypothesis and examines how the contamination of insect adhesive pads with three-dimensional epicuticular waxes of different plant species contributes to the reduction of insect attachment. We measured traction forces of tethered Chrysolina fastuosa male beetles having hairy adhesive pads on nine wax-bearing plant surfaces differing in both shape and dimensions of the wax structures and examined insect adhesive organs after they have contacted waxy substrates. For comparison, we performed the experiments with the same beetle individuals on a clean glass sample just before (gl1) and immediately after (gl2) the test on a plant surface. The tested insects showed a strong reduction of the maximum traction force on all waxy plant surfaces compared to the reference experiment on glass (gl1). After beetles have walked on waxy plant substrates, their adhesive pads were contaminated with wax material, however, to different extents depending on the plant species. The insects demonstrated significantly lower values of both the maximum traction force and the first peak of the traction force and needed significantly longer time to reach the maximum force value in the gl2 test than in the gl1 test. These effects were especially pronounced in cases of the plant surfaces covered with wax projections having higher aspect ratios. The data obtained clearly indicated the impact of waxy plant surfaces on the insect ability to subsequently attach to the clean smooth surface. This effect is caused by the contamination of adhesive pads and experimentally supports the contamination hypothesis.

Allometric Scaling Reveals Evolutionary Constraint on Odonata Wing Cellularity via Critical Crack Length.

Scaling in insect wings is a complex phenomenon that seems pivotal in maintaining wing functionality. In this study, the relationship between wing size and the size, location, and shape of wing cells in dragonflies and damselflies (Odonata) is investigated, aiming to address the question of how these factors are interconnected. To this end, WingGram, the recently developed computer-vision-based software, is used to extract the geometric features of wing cells of 389 dragonflies and damselfly wings from 197 species and 16 families. It has been found that the cell length of the wings does not depend on the wing size. Despite the wide variation in wing length (8.42 to 56.5 mm) and cell length (0.1 to 8.5 mm), over 80% of the cells had a length ranging from 0.5 to 1.5 mm, which was previously identified as the critical crack length of the membrane of locust wings. An isometric scaling of cells is also observed with maximum size in each wing, which increased as the size increased. Smaller cells tended to be more circular than larger cells. The results have implications for bio-mimetics, inspiring new materials and designs for artificial wings with potential applications in aerospace engineering and robotics.

TriTrap: A Robotic Gripper Inspired by Insect Tarsal Chains.

Gripping, holding, and moving objects are among the main functional purposes of robots. Ever since automation first took hold in society, optimizing these functions has been of high priority, and a multitude of approaches has been taken to enable cheaper, more reliable, and more versatile gripping. Attempts are ongoing to reduce grippers' weight, energy consumption, and production and maintenance costs while simultaneously improving their reliability, the range of eligible objects, working loads, and environmental independence. While the upper bounds of precision and flexibility have been pushed to an impressive level, the corresponding solutions are often dependent on support systems (e.g., sophisticated sensors and complex actuation machinery), advanced control paradigms (e.g., artificial intelligence and machine learning), and typically require more maintenance owed to their complexity, also increasing their cost. These factors make them unsuited for more modest applications, where moderate to semi-high performance is desired, but simplicity is required. In this paper, we attempt to highlight the potential of the tarsal chain principle on the example of a prototype biomimetic gripping device called the TriTrap gripper, inspired by the eponymous tarsal chain of insects. Insects possess a rigid exoskeleton that receives mobility due to several joints and internally attaching muscles. The tarsus (foot) itself does not contain any major intrinsic muscles but is moved by an extrinsically pulled tendon. Just like its biological counterpart, the TriTrap gripping device utilizes strongly underactuated digits that perform their function using morphological encoding and passive conformation, resulting in a gripper that is versatile, robust, and low cost. Its gripping performance was tested on a variety of everyday objects, each of which represented different size, weight, and shape categories. The TriTrap gripper was able to securely hold most of the tested objects in place while they were lifted, rotated, and transported without further optimization. These results show that the insect tarsus selected approach is viable and warrants further development, particularly in the direction of interface optimization. As such, the main goal of the TriTrap gripper, which was to showcase the tarsal chain principle as a viable approach to gripping in general, was achieved.

Multiple forces facilitate the aquatic acrobatics of grasshopper and bioinspired robot.

Aquatic locomotion is challenging for land-dwelling creatures because of the high degree of fluidity with which the water yields to loads. We surprisingly found that the Chinese rice grasshopper Oxya chinensis, known for its terrestrial acrobatics, could swiftly launch itself off the water's surface in around 25 ms and seamlessly transition into flight. Biological observations showed that jumping grasshoppers use their front and middle legs to tilt up bodies first and then lift off by propelling the water toward the lower back with hind legs at angular speeds of up to 18°/ms, whereas the swimming grasshoppers swing their front and middle legs in nearly horizontal planes and move hind legs less violently (~8°/ms). Force measurement and model analysis indicated that the weight support could be achieved by hydrostatics which are proportionate to the mass of the grasshoppers, while the propulsions for motion are derived from the controlled limb-water interactions (i.e., the hydrodynamics). After learning the structural and behavioral strategies of the grasshoppers, a robot was created and was capable of swimming and jumping on the water surface like the insects, further demonstrating the effectiveness of decoupling the challenges of aquatic locomotion by the combined use of the static and dynamic hydro forces. This work not only uncovered the combined mechanisms responsible for facilitating aquatic acrobatics in this species but also laid a foundation for developing bioinspired robots that can locomote across multiple media.

Mandible mechanical properties and composition of the larval Glossosoma boltoni (Trichoptera, Insecta).

Insect feeding structures, such as mandibles, interact with the ingesta (food or/and substrate) and can be adapted in morphology, composition of material and mechanical properties. The foraging on abrasive ingesta, as on algae covering rocks, is particularly challenging because the mandibles will be prone to wear and structural failure, thus suggesting the presence of mandibular adaptations to accompany this feeding behavior. Adaptations to this are well studied in the mouthparts of molluscs and sea urchins, but for insects there are large gaps in our knowledge. In this study, we investigated the mandibles of a grazing insect, the larvae of the trichopteran Glossosoma boltoni. Using scanning electron microscopy, wear was documented on the mandibles. The highest degree was identified on the medial surface of the sharp mandible tip. Using nanoindentation, the mechanical properties, such as hardness and Young's modulus, of the medial and lateral mandible cuticles were tested. We found, that the medial cuticle of the tip was significantly softer and more flexible than the lateral one. These findings indicate that a self-sharpening mechanism is present in the mandibles of this species, since the softer medial cuticle is probably abraded faster than the harder lateral one, leading to sharp mandible tips. To investigate the origins of these properties, we visualized the degree of tanning by confocal laser scanning microscopy. The autofluorescence signal related to the mechanical property gradients. The presence of transition and alkaline earth metals by energy dispersive X-ray spectroscopy was also tested. We found Ca, Cl, Cu, Fe, K, Mg, Mn, P, S, Si, and Zn in the cuticle, but the content was very low and did not correlate with the mechanical property values.

Heartworm and seal louse: Trends in prevalence, characterisation of impact and transmission pathways in a unique parasite assembly on seals in the North and Baltic Sea.

The ectoparasitic seal louse, Echinophthirius horridus infects harbour (Phoca vitulina) and grey seals (Halichoerus grypus) in the North and Baltic Sea. The endoparasitic heartworm Acanthocheilonema spirocauda parasitizes the right heart and blood vessels of harbour seals. The complete lifecycle of the heartworm is not entirely understood although the seal louse is assumed to serve as vector for its transmission. Knowledge about the impact of both parasite species on host health are scarce. In this study, necropsy data and archived parasites of harbour and grey seals in German waters were analysed to determine long-term seal louse (SLP) and heartworm prevalence (HWP) from 2014 to 2021. Histology, microbiology and scanning electron microscopy (SEM) were applied on seal louse infected and uninfected skin to investigate associated lesions and the health impact. During the study period, HWP in harbour seals was 13%, the SLP in harbour seals was 4% and in grey seals 10%. HWP of harbour seals was significantly higher during the winter months compared to the summer. SLP in adults was significantly higher in comparison to juvenile harbour seals. SLP varied significantly between grey seals from the North and Baltic Sea. Filarial nematodes were detected in the haemocoel, pharynx, and intestine of E. horridus highlighting the seal louse as vector for heartworms. Alopecia and folliculitis were associated with the attachment posture of E. horridus and microbiological investigations isolated bacteria commonly associated with folliculitis.

Attachment performance of the ectoparasitic seal louse Echinophthirius horridus.

Marine mammals host a great variety of parasites, which usually co-evolved in evolutionary arms races. However, little is known about the biology of marine mammal insect parasites, and even less about physical aspects of their life in such a challenging environment. One of 13 insect species that manage to endure long diving periods in the open sea is the seal louse, Echinophthirius horridus, parasitising true seals. Its survival depends on its specialised adaptations for enduring extreme conditions such as hypoxia, temperature changes, hydrostatic pressure, and strong drag forces during host dives. To maintain a grip on the seal fur, the louse's leg morphology is equipped with modified snap hook claws and soft pad-like structures that enhance friction. Through techniques including CLSM, SEM, and histological staining, we have examined the attachment system's detailed structure. Remarkably, the seal louse achieves exceptional attachment forces on seal fur, with safety factors (force per body weight) reaching 4500 in average measurements and up to 18000 in peak values, indicating superior attachment performance compared to other insect attachment systems. These findings underscore the louse's remarkable adaptations for life in a challenging marine environment, shedding light on the relationship between structure and function in extreme ecological niches.