Infrared photoinduced electrochemiluminescence microscopy of single cells.

Electrochemiluminescence (ECL) is evolving rapidly from a purely analytical technique into a powerful microscopy. Herein, we report the imaging of single cells by photoinduced ECL (PECL; λem = 620 nm) stimulated by an incident near-infrared light (λexc = 1050 nm). The cells were grown on a metal-insulator-semiconductor (MIS) n-Si/SiOx/Ir photoanode that exhibited stable and bright PECL emission. The large anti-Stokes shift allowed for the recording of well-resolved images of cells with high sensitivity. PECL microscopy is demonstrated at a remarkably low onset potential of 0.8 V; this contrasts with classic ECL, which is blind at this potential. Two imaging modes are reported: (i) photoinduced positive ECL (PECL+), showing the cell membranes labeled with the [Ru(bpy)3]2+ complex; and (ii) photoinduced shadow label-free ECL (PECL-) of cell morphology, with the luminophore in the solution. Finally, by adding a new dimension with the near-infrared light stimulus, PECL microscopy should find promising applications to image and study single photoactive nanoparticles and biological entities.

Local reactivity of metal-insulator-semiconductor photoanodes imaged by photoinduced electrochemiluminescence microscopy.

Localized photoinduced electrochemiluminescence (PECL) is studied on photoanodes composed of Ir microbands deposited on n-Si/SiOx. We demonstrate that PECL microscopy precisely imaged the hole-driven heterogeneous photoelectrochemical reactivity. The method is promising for elucidating the local activity of photoelectrodes that are employed in solar energy conversion.

Bimodal Electrochemiluminescence Microscopy of Single Cells.

Electrochemiluminescence (ECL) microscopy is an emerging technique with new applications such as imaging of single entities and cells. Herein, we have developed a bimodal and bicolor approach to record both positive ECL (PECL: light-emitting object on dark background) and shadow label-free ECL (SECL: nonemissive object shadowing the background luminescence) images of single cells. This bimodal approach is the result of the simultaneous emissions of [Ru(bpy)3]2+ used to label the cellular membrane (PECL) and [Ir(sppy)3]3- dissolved in solution (SECL). By spectrally resolving the ECL emission wavelengths, we recorded the images of the same cells in both PECL and SECL modes using the [Ru(bpy)3]2+ (λmax = 620 nm) and [Ir(sppy)3]3- (λmax = 515 nm) luminescence, respectively. PECL shows the distribution of the [Ru(bpy)3]2+ labels attached to the cellular membrane, whereas SECL reflects the local diffusional hindrance of the ECL reagents by each cell. The high sensitivity and surface-confined features of the reported approach are demonstrated by imaging cell-cell contacts during the mitosis process. Furthermore, the comparison of PECL and SECL images demonstrates the differential diffusion of tri-n-propylamine and [Ir(sppy)3]3- through the permeabilized cell membranes. Consequently, this dual approach enables the imaging of the morphology of the cell adhering on the surface and can significantly contribute to multimodal ECL imaging and bioassays with different luminescent systems.

Responsive microgels-based colloidosomes constructed from all-aqueous pH-switchable coacervate droplets.

HYPOTHESIS: Colloidosomes made of stimuli-responsive microgels offer the opportunity to design polymeric capsules with a hierarchical and tunable pore distribution. Coacervates stabilized by a microgel monolayer represent a unique strategy to build colloidosomes from all-aqueous emulsion drops, while exploiting the sequestration and dissolution properties of the coacervates. EXPERIMENTS: Methacrylated poly(N-isopropylacrylamide) (pNIPAM) microgels are used to stabilize coacervates made of an ampholyte polymer at a pH close to its isoelectric point. They are further cross-linked under UV-irradiation. The resulting assemblies are studied by means of confocal microscopy. Their permeability towards dextrans and nanoparticles is studied before and after dissolution of the coacervate. FINDINGS: PNIPAM microgels are found to stabilize the coacervates by adsorbing at their surface. Inter cross-linking the microgels results in the formation of an elastic colloidosome that persists after the coacervate dissolution and withstands surface deformations up to about 200%. The coacervate is exploited as a sequestrating core to entrap a water-soluble payload, which can be further released upon coacervate dissolution, while the membrane exhibits a size-selecting permeability. The membrane properties can also be switched by the volume phase transition of the microgels. Coacervate-embedded colloidosomes open new perspectives in the area of encapsulation/extraction and controlled transport of water-soluble/dispersed species.

Electrochemiluminescent enantioselective detection with chiral-imprinted mesoporous metal surfaces.

Chiral-imprinted mesoporous Pt-Ir alloy surfaces were combined in a synergetic way with electrochemiluminescence (ECL) to detect the two enantiomers of phenylalanine (PA) as a model compound, acting simultaneously as a chiral target and as a co-reactant to generate significant differences in ECL signals. The chiral features of the metal surfaces are converted into an enantioselective electrogeneration of the excited state of the [Ru(bpy)3]2+ dye, which in fine produces the differentiating light emission with up to 20-fold differences in intensity for the two enantiomers. These findings open up the possibility of developing new ECL-based bioassays and microscopy of chiral environments.

Enhanced electrochemiluminescence at microgel-functionalized beads.

Bead-based assays are successfully combined with electrochemiluminescence (ECL) technology for detection of a wide range of biomarkers. Herein, we demonstrate a novel approach to enhance the ECL signal by decorating micrometric beads with [Ru(bpy)3]2+-grafted microgels (diameter ∼100 nm). Rapid and stable light emission was spatially resolved at the level of single functionalized beads. An enhancement of the ECL signal of microgel-labeled beads by 9-fold was observed in comparison to molecularly linked [Ru(bpy)3]2+ beads prepared by a sandwich immunoassay or an amide bond. Imaging the ECL signal at the single bead level shows that the size of the ECL-emitting layer is extended using the microgels. The reported method offers a great promise for the optimization of bead-based ECL detection and subsequent development of ECL microscopy.

Spatially Controlled CO2 Conversion Kinetics in Natural Leaves for Motion Generation.

Living systems that can spontaneously exhibit directional motion belong to diverse classes such as bacteria, sperm and plankton. They have fascinated scientists in recent years to design completely artificial or biohybrid mobile objects. Natural ingredients, like parts of plants, have been used to elaborate miniaturized dynamic objects, which can move when they are combined with other, non-natural, building blocks. Herein, we report that the precise structural tailoring of natural plant leaves allows generating a spatially predefined and confined release of oxygen gas, due to the conversion of carbon dioxide. This constitutes the driving force for generating motion, which is solely due to the respiration of leaves by photosynthesis. The rate of gas evolution can be fine-tuned by changing the light intensity and the leaf size, allowing ultimately to control the motility of objects with dimensions ranging from the millimeter to the micrometer scale.

In Situ Spectroelectrochemical-Conductance Measurements as an Efficient Tool for the Evaluation of Charge Trapping in Conducting Polymers.

In situ UV-vis-NIR spectroelectrochemistry has been intensively used to evaluate the electronic transitions during the charging/discharging process of π-conjugated polymers. However, the type of charge carrier and the mechanisms of their transport, remains still a point of discussion. Herein, the coupling between UV-vis-NIR spectroscopy and in situ electrochemical-conductance measurements is proposed to compare the doping process of three different thiophene-based conducting polymers. The simultaneous monitoring of electrical and absorption properties, associated with low energy electronic transitions characteristic for polarons and bipolarons, was achieved. In addition, this method allows evaluating the reversible charge trapping mechanism of poly-3,4-o-xylendioxythiophene (PXDOT), caused by the formation of σ-dimers, making it a very useful tool to determine relevant physicochemical properties of conductive materials.

Electrochemiluminescence Loss in Photobleaching.

The effects of photobleaching on electrochemiluminescence (ECL) was investigated for the first time. The plasma membrane of Chinese Hamster Ovary (CHO) cells was labeled with a [Ru(bpy)3 ]2+ derivative. Selected regions of the fixed cells were photobleached using the confocal mode with sequential stepwise illumination or cumulatively and they were imaged by both ECL and photoluminescence (PL). ECL was generated with a model sacrificial coreactant, tri-n-propylamine. ECL microscopy of the photobleached regions shows lower ECL emission. We demonstrate a linear correlation between the ECL decrease and the PL loss due to the photobleaching of the labels immobilized on the CHO membranes. The presented strategy provides valuable information on the fundamentals of the ECL excited state and opens new opportunities for exploring cellular membranes by combining ECL microscopy with photobleaching techniques such as fluorescence recovery after photobleaching (FRAP) or fluorescence loss in photobleaching (FLIP) methods.

Electrochemiluminescence Microscopy of Cells: Essential Role of Surface Regeneration.

Electrochemiluminescence (ECL) microscopy is successfully applied to image cells, micro-/nano-objects, and electrochemical processes at electrode surfaces. The classic ECL tandem system is composed of the [Ru(bpy)3]2+ luminophore with the very efficient tripropylamine (TPA) coreactant. The dramatic decrease of the ECL signal observed when recording successive ECL images constitutes a key limitation for the development of ECL microscopy. Herein, we investigated the progressive decrease of the ECL signal of Chinese hamster ovary (CHO) cells. The plasma membranes of CHO cells were labeled with a [Ru(bpy)3]2+ derivative, and the ECL images were recorded using the TPA coreactant. We demonstrate that the loss of the ECL signal is related to the electrochemical step because of a progressive lower TPA oxidation current. We tested a cathodic regenerative treatment of the electrode surface, which allowed us to restore the initial TPA oxidation intensity and thus to record a sequence of ECL images without any vanishing of the light signal. The electrochemical approach presented here is an essential step for the development of ECL microscopy of cells.

Dynamic monitoring of a bi-enzymatic reaction at a single biomimetic giant vesicle.

Giant unilamellar vesicles were used as individual biomimetic micro-reactors wherein a model bi-enzymatic reaction involving a glucose oxidase (GOx) and horseradish peroxidase (HRP) was monitored by confocal microscopy. These giant vesicles were formed from a natural mix of phospholipids in physiological conditions of pH and osmolarity (phosphate buffer, pH 7.4, 330 mOsm). The so-called Amplex Red assay, which generates the highly fluorescent resorufin species, was performed in individual vesicles and used to report on the progress of the whole reaction. We aimed at controlling kinetically and quantitatively the different steps of the bi-enzymatic reaction in vesicles. To do so, substrates (glucose and Amplex Red) were provided in individual reactors by two ways. Electro-microinjection allowed the control of volume variations owing to a reservoir of lipids connected to the vesicle membrane. Alternatively, substrates could passively diffuse from the outer solution to the vesicle compartment. The semi-permeability feature of the phospholipid membrane was characterized for all substrates and products while we demonstrated that enzymes remain sequestrated in the vesicles after their injection. The Amplex Red assay was thus achieved in individual vesicles under steady-state conditions, and could pursue over tens of minutes. Such giant vesicles are stable, fully compatible with media used for bioanalyses and allow out-of-equilibrium reactions at time scales compatible with living reaction dynamics, making them a good choice for the development of minimal cell-like systems.

Reactivity mapping of luminescence in space: Insights into heterogeneous electrochemiluminescence bioassays.

Electrochemiluminescence (ECL) is a powerful (bio)analytical method based on an optical readout. It is successfully applied in the heterogeneous format for immunoassays and imaging using the model and most widely used ECL system, which consists of the immobilized [Ru(bpy)3]2+ label with tripropylamine (TPA) as a coreactant. However, a major drawback is the significant decrease of the ECL intensity over time. Herein, to decipher the process responsible for this progressive loss of ECL signal, we investigated its electrochemical and photophysical properties by mapping the luminescence reactivity at the level of single micrometric beads. Polystyrene beads were functionalized by the [Ru(bpy)3]2+ dye via a sandwich immunoassay or a peptide bond. ECL emission was generated in presence of the very efficient TPA coreactant. Imaging both photoluminescence and ECL reactivities of different regions (located near or far from the electrode surface) of a [Ru(bpy)3]2+-decorated bead allows us to demonstrate the remarkable photophysical stability of the ECL label, even in presence of the very reactive electrogenerated TPA radicals. We show that the ECL vanishing correlates directly with the lower TPA oxidation current. Finally, we propose a simple electrochemical treatment, which allows to regenerate the electrode surface and thus to recover several times the strong initial ECL signal. The reactivity imaging approach provides insights into the ECL mechanism and the main factors governing the stability of the emission, which should find promising ECL applications in bioassays and microscopy.

Asymmetric Modification of Carbon Nanotube Arrays with Thermoresponsive Hydrogel for Controlled Delivery.

In this work, bipolar electrochemistry is used to perform wireless indirect electrodeposition of two different polymer coatings on both sides of carbon nanotube arrays. Using a thermoresponsive hydrogel on one side and an inert insoluble polymer on the other side, it is possible to generate, in a single step, a nanoporous reservoir with Janus character closed on one side by a thermoresponsive membrane. The thermoresponsive polymer, poly(N-isopropylacrylamide) (pNIPAM), is generated by the local reduction of persulfate ions, which initiates radical polymerization of NIPAM. Electrophoretic paint (EP) is chosen as an inert polymer. It is deposited by precipitation because of a local decrease in pH during water oxidation. Both polymers can be deposited simultaneously on opposite sides of the bipolar electrode during the application of the electric field, yielding a double-modified Janus object. Moreover, the length and thickness of the polymer layers can be controlled by varying the electric field and the deposition time. This concept is applied to vertically aligned carbon nanotube arrays (VACNTs), trapped inside an anodic aluminum oxide membrane, which can further be used as a smart reservoir for chemical storage and release. A fluorescent dye is loaded in the VACNTs and its release is studied as a function of temperature. Low temperature, when the hydrogel layer is in the swollen state, allows diffusion of the molecule. Dye release occurs on the hydrogel-modified side of the VACNTs. At high temperatures, when the hydrogel layer is in the collapsed state, dye release is blocked because of the impermeability of the pNIPAM layer. This concept paves the way toward the design of advanced devices in the fields of drug storage and directed delivery.

Designing tubular conducting polymer actuators for wireless electropumping.

Rational design and shaping of soft smart materials offer potential applications that cannot be addressed with rigid systems. In particular, electroresponsive elastic materials are well-suited for developing original active devices, such as pumps and actuators. However, applying the electric stimulus requires usually a physical connection between the active part and a power supply. Here we report about the design of an electromechanical system based on conducting polymers, enabling the actuation of a wireless microfluidic pump. Using the electric field-induced asymmetric polarization of miniaturized polypyrrole tubes, it is possible to trigger simultaneously site-specific chemical reactions, leading to shrinking and swelling in aqueous solution without any physical connection to a power source. The complementary electrochemical reactions occurring at the opposite extremities of the tube result in a differential change of its diameter. In turn, this electromechanical deformation allows inducing highly controlled fluid dynamics. The performance of such a remotely triggered electrochemically active soft pump can be fine-tuned by optimizing the wall thickness, length and inner diameter of the material. The efficient and fast actuation of the polymer pump opens up new opportunities for actuators in the field of fluidic or microfluidic devices, such as controlled drug release, artificial organs and bioinspired actuators.

Chiral platinum-polypyrrole hybrid films as efficient enantioselective actuators.

We report the synthesis of a hybrid bilayer, being composed of a free-standing conducting polymer film and a layer of mesoporous metal, encoded with chiral features. The resulting structure constitutes an enantioselective actuator, which can be electrochemically addressed in a wireless way. The controlled discriminatory deformation of the film allows an easy readout of chiral information.

Self-coacervation of ampholyte polymer chains as an efficient encapsulation strategy.

Coacervation is a phase separation process involving two aqueous phases, one solute-phase and one solute-poor phase. It is frequently observed among oppositely-charged polyelectrolyte systems. In this study, we focus on self-coacervation involving a single polymer chain and investigate its potential for encapsulation applications. Negatively charged polyacrylic acid polymer chains were partially cationized using diamine and carbodiimide chemistry affording ampholytes, named PAA-DA, with tunable charge ratio. When dispersed in water, at pH 7, PAA-DA was soluble but a phase separation occurs when decreasing pH close to the isoelectric point. Coacervation is found only for a given amine-to-acid ratio otherwise precipitation is observed. Increasing the pH above 4 yielded progressive destruction of the coacervates droplets via the formation of vacuoles within droplets and subsequent full homogeneous redispersion of PAA-DA in water. However, addition of calcium allowed increasing the coacervate droplet stability upon increasing the pH to 7 as the divalent ion induced gelation within droplets. Moreover, the coacervate droplets present the ability to spontaneously sequestrate a broad panel of entities, from small molecules to macromolecules or colloids, with different charges, size and hydrophobicity. Thanks to the reversible character of the coacervates, triggered-release could be easily achieved, either by varying the pH or by removing calcium ions in the case of calcium-stabilized coacervates. Self-coacervation presents the advantage of pathway-independent preparation, offering a real output interest in pharmacy, water treatment, food science or diagnostics.

Wireless Coupling of Conducting Polymer Actuators with Light Emission.

Combining the actuation of conducting polymers with additional functionalities is an interesting fundamental scientific challenge and increases their application potential. Herein we demonstrate the possibility of direct integration of a miniaturized light emitting diode (LED) in a polypyrrole (PPy) matrix in order to achieve simultaneous wireless actuation and light emission. A light emitting diode is used as a part of an electroactive surface on which electrochemical polymerization allows direct incorporation of the electronic device into the polymer. The resulting free-standing polymer/LED hybrid can be addressed by bipolar electrochemistry to trigger simultaneously oxidation and reduction reactions at its opposite extremities, leading to a controlled deformation and an electron flow through the integrated LED. Such a dual response in the form of actuation and light emission opens up interesting perspectives in the field of microrobotics.

Sealing hyaluronic acid microgels with oppositely-charged polypeptides: A simple strategy for packaging hydrophilic drugs with on-demand release.

A simple route to deliver on demand hydrosoluble molecules such as peptides, packaged in biocompatible and biodegradable microgels, is presented. Hyaluronic acid hydrogel particles with a controlled structure are prepared using a microfluidic approach. Their porosity and their rigidity can be tuned by changing the crosslinking density. These negatively-charged polyelectrolytes interact strongly with positively-charged linear peptides such as poly-l-lysine (PLL). Their interactions induce microgel deswelling and inhibit microgel enzymatic degradability by hyaluronidase. While small PLL penetrate the whole volume of the microgel, PLL larger than the mesh size of the network remain confined at its periphery. They make a complexed layer with reduced pore size, which insulates the microgel inner core from the outer medium. Consequently, enzymatic degradation of the matrix is fully inhibited and non-affinity hydrophilic species can be trapped in the core. Indeed, negatively-charged or small neutral peptides, without interactions with the network, usually diffuse freely across the network. By simple addition of large PLL, they are packaged in the core and can be released on demand, upon introduction of an enzyme that degrades selectively the capping agent. Single polyelectrolyte layer appears as a simple generic method to coat hydrogel-based materials of various scales for encapsulation and controlled delivery of hydrosoluble molecules.

Potential-Induced Fine-Tuning of the Enantioaffinity of Chiral Metal Phases.

Concepts leading to single enantiomers of chiral molecules are of crucial importance for many applications, including pharmacology and biotechnology. Recently, mesoporous metal phases encoded with chiral information have been developed. Fine-tuning of the enantioaffinity of such structures by imposing an electric potential is proposed, which can influence the electrostatic interactions between the chiral metal and the target enantiomer. This allows the binding affinity between the chiral metal and the target enantiomer to be increased, and thus, the discrimination between two enantiomers to be improved. The concept is illustrated by generating chiral encoded metals in a microfluidic channel by reduction of a platinum salt in the presence of a liquid crystal and l-tryptophan as a chiral model template. After removal of the template molecules, the modified microchannel retains a pronounced chiral character. The chiral recognition efficiency of the microchannel can be fine-tuned by applying a suitable potential to the metal phase. This enables the separation of both components of a racemate flowing through the channel. The approach constitutes a promising and complementary strategy in the frame of chiral discrimination technologies.

Surface-Confined Electrochemiluminescence Microscopy of Cell Membranes.

Herein is reported a surface-confined microscopy based on electrochemiluminescence (ECL) that allows to image the plasma membrane of single cells at the interface with an electrode. By analyzing photoluminescence (PL), ECL and AFM images of mammalian CHO cells, we demonstrate that, in contrast to the wide-field fluorescence, ECL emission is confined to the immediate vicinity of the electrode surface and only the basal membrane of the cell becomes luminescent. The resulting ECL microscopy reveals details that are not resolved by classic fluorescence microscopy, without any light irradiation and specific setup. The thickness of the ECL-emitting regions is ∼500 nm due to the unique ECL mechanism that involves short-lifetime electrogenerated radicals. In addition, the reported ECL microscopy is a dynamic technique that reflects the transport properties through the cell membranes and not only the specific labeling of the membranes. Finally, disposable transparent carbon nanotube (CNT)-based electrodes inkjet-printed on classic microscope glass coverslips were used to image cells in both reflection and transmission configurations. Therefore, our approach opens new avenues for ECL as a surface-confined microscopy to develop single cell assays and to image the dynamics of biological entities in cells or in membranes.