RESUMEN
This work focused on obtaining a low-temperature powder coating characterized by self-healing properties. To achieve this, acrylic resin, blocked polyisocyanates (bPICs) with 1,2,4-triazole, and unsaturated commercial resin were used. The synthesis of bPICs with triazole enabled the low-temperature curing and reversible Diels-Alder (DA) reaction at 160 °C. The chemical structure of bPICs was confirmed using 1H-NMR. The occurrence of the DA and retro-DA (rDA) reactions in the crosslinked polymer, at temperatures of 60-85 °C and 90-130 °C, respectively, was confirmed using Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), and FT-IR spectroscopy. The self-healing properties of the powder coating were examined using polarized optical microscopy. Additionally, the occurrence of the DA and rDA reactions between triazole and unsaturated polyester resin was investigated through repeated self-healing tests.
RESUMEN
This article presents the findings of a study focusing on the gas generation of 3D-printed cores fabricated using binder-jetting technology with furfuryl resin. The research aimed to compare gas emission levels, where the volume generated during the thermal degradation of the binder significantly impacts the propensity for gaseous defects in foundries. The study also investigated the influence of the binder type (conventional vs. 3D-printed dedicated binder) and core construction (shell core) on the quantity of gaseous products from the BTEX group formed during the pouring of liquid foundry metal into the cores. The results revealed that the emitted gas volume during the thermal decomposition of the organic binder depended on the core sand components and binder type. Cores produced using conventional methods emitted the least gases due to lower binder content. Increasing Kaltharz U404 resin to 1.5 parts by weight resulted in a 37% rise in gas volume and 27% higher benzene emission. Adopting shell cores reduced gas volume by over 20% (retaining sand with hardener) and 30% (removing sand with hardener), presenting an eco-friendly solution with reduced benzene emissions and core production costs. Shell cores facilitated the quicker removal of gaseous binder decomposition products, reducing the likelihood of casting defects. The disparity in benzene emissions between 3D-printed and vibratory-mixed solid cores is attributed to the sample preparation process, wherein 3D printing ensured greater uniformity.
RESUMEN
A new type of organobentonite foundry binder composed of a composite of bentonite (SN) and poly(acrylic acid) (PAA) was analyzed using thermal analysis (TG-DTG-DSC) and pyrolysis gas chromatography mass spectrometry (Py-GC/MS). The temperature range in which the composite retains its binding properties was identified using thermal analysis of the composite and its components. Results showed that the thermal decomposition process is complex and involves physicochemical transformations that are mainly reversible at temperatures in the ranges of 20-100 °C (related to evaporation of solvent water) and 100-230 °C (related to intermolecular dehydration). The decomposition of PAA chains occurs between 230 and 300 °C, while complete decomposition of PAA and formation of organic decomposition products takes place at 300-500 °C. Dehydroxylation of montmorillonite (MMT) in bentonite begins at about 500 °C, which leads to a drastic structural transformation. An endothermic effect associated with the remodeling of the mineral structure was observed on the DSC curve in the range of 500-750 °C. The produced SN/PAA composite was found to be thermostable during degradation in both oxidative and inert atmosphere, similar to the starting bentonite, and even maintained over a relatively higher and wider temperature range compared to organic binding materials used. At the given temperatures of 300 °C and 800 °C, only CO2 emissions occur from all the examined SN/PAA samples. There is no emission of compounds from the BTEX group. This means that the proposed binding material in the form of the MMT-PAA composite will not pose a threat to the environment and the workplace.
RESUMEN
Casting cores produced in additive manufacturing are more often used in industrial practice, in particular in the case of the production of unit castings and castings with very complex geometry. The growing interest in the technology of 3D printing of cores and molds also brings emerging doubts related to their mechanical and technological properties. This article presents a comparison of the properties of cores made of sand with acid-curing furfuryl resin, made with 3D printing technology; the cores were prepared in a conventional way (mixing and compaction). The main purpose of this research was to determine the possibility of using shell cores as a substitute for solid cores, aimed at reducing the amount of binder in the core. The influence of the type of the binder and the size of the grain matrix fraction on the obtained mechanical and technological properties of the cores, with particular emphasis on abrasion and thermal deformation, as well as on the kinetics of their hardening, was demonstrated.
RESUMEN
A series of studies related to the production of organobentonite, i.e., bentonite-poly(acrylic acid), and its use as a matrix grain-binding material in casting moulding sand is presented. In addition, a new carbon additive in the form of shungite was introduced into the composition of the moulding sand. Selected technological and strength properties of green sand bond with the obtained organobentonite with the addition of shungite as a new lustrous carbon carrier (Rcw, Rmw, Pw, Pw, PD) were determined. The introduction of shungite as a replacement for coal dust in the hydrocarbon resin system demonstrated the achievement of an optimum moulding sand composition for practical use in casting technology. Using chromatographic techniques (Py-GC/MS, GC), the positive effect of shungite on the quantity and quality of the gaseous products generated from the moulding sand during the thermal destruction of its components was noted, thus confirming the reduced environmental footprint of the new carbon additive compared to the commonly used lustrous carbon carriers. The test casting obtained in the mould of the organobentonite moulding sand and the shungite/hydrocarbon resin mixture showed a significantly better accuracy of the stepped model shape reproduction and surface smoothness compared to the casting obtained with the model moulding sand.
RESUMEN
The principal task of national healthcare systems is to provide health services that are safe, accessible, high-quality and people-oriented. To ensure the continuity of healthcare, support activities related to patient transfer and logistics are necessary. Effective implementation of transport processes is a factor affecting the possibility of medical intervention, in terms of both planned and life-saving care. The reliability of the healthcare supply chain is a key factor in patient health. In our research, we have used the method of a single case study of a public regional hospital in Poland providing comprehensive medical services. The aim of the research is to identify the factors that affect the reliability of the healthcare supply chain in relation to the interhospital air transport of patients. Our qualitative research using process mapping reveals what factors affect the reliability of interhospital medical air transport. The analysis of 100 interhospital medical air transport cases has allowed us to create a general procedure related to the movement of patients between the facilities of the healthcare system in Poland. Our research shows that the key factor of reliability is the coherent and integrated cooperation of institutions involved in transport processes.
Asunto(s)
Atención a la Salud , Instituciones de Salud , Humanos , Transferencia de Pacientes , Polonia , Reproducibilidad de los ResultadosRESUMEN
BACKGROUND: Open surgical treatment of short bulbar urethral strictures (urethroplasty) is commonly performed as transecting excision and primary anastomosis (tEPA) or buccal mucosa grafting (BMG). Erectile dysfunction and penile complications have been reported, but there is an absence of randomised trials. OBJECTIVE: To evaluate sexual dysfunction and penile complications after urethroplasty with tEPA versus BMG. DESIGN, SETTING, AND PARTICIPANTS: Centres in Finland, Sweden and Norway participated. Patients with a bulbar urethral stricture of ≤2 cm without previous urethroplasty were randomised. The primary endpoints were the degree of erectile dysfunction and penile complications. Follow-up was 12 mo. INTERVENTION: Patients were randomised to either tEPA or BMG urethroplasty. OUTCOME MEASUREMENTS AND STATISTICAL ANALYSIS: Sexual dysfunction was measured using the International Index of Erectile Function, 5-item version (IIEF-5) and a penile complications questionnaire (PCQ) designed for this study. Continuous data were analysed using analysis of covariance and categorical data were compared using a χ2 test. RESULTS AND LIMITATIONS: A total of 151 patients were randomised to either tEPA (n = 75) or BMG (n = 76). The tEPA group reported more penile complications (p = 0.02), especially reduced glans filling (p = 0.03) and a shortened penis (p = 0.001). There were no differences in postoperative IIEF-5 total scores. Recurrence rates were similar in both groups (12.9%) but the study was not designed to detect differences in recurrence rates. The PCQ is not validated, which is a limitation. CONCLUSIONS: More patients reported penile complications after urethroplasty with tEPA than with BMG. This should be considered when choosing the operative method, and patients should be informed accordingly. PATIENT SUMMARY: This study compared two common operations for repair of narrowing of the male urethra. Neither of the two methods seems to cause worsened erections. However, penile problems are more common after the transection technique than after the grafting technique.
Asunto(s)
Disfunción Eréctil , Disfunciones Sexuales Fisiológicas , Estrechez Uretral , Anastomosis Quirúrgica/efectos adversos , Disfunción Eréctil/etiología , Femenino , Humanos , Masculino , Mucosa Bucal/trasplante , Disfunciones Sexuales Fisiológicas/etiología , Resultado del Tratamiento , Trietilenofosforamida , Uretra/cirugía , Estrechez Uretral/cirugía , Procedimientos Quirúrgicos Urológicos Masculinos/efectos adversos , Procedimientos Quirúrgicos Urológicos Masculinos/métodosRESUMEN
We investigated the vibrational density of states of sodium carboxymethyl starch (CM-starch) by terahertz (THz) time-domain spectroscopy. The CM-starch showed a broad peak at â¼3 THz. The structure of the peak was similar to those corresponding to glucose-based polymer glasses possessing hydrogen bonds. The boson peak (BP) appeared at 1.16 THz at the lowest temperature and disappeared because of the existence of excess wing at higher temperatures. However, based on our novel BP frequency determination method using the inflection point of the extinction coefficient, the BP frequency showed almost no dependence on temperature. Further, the chain length dependence of the BP frequency of the glucose-based glasses showed that the BP frequency of the polymer glass was slightly lower than that of the monomer glass. The power law behaviour of the absorption coefficient suggested the existence of fractons, and the fractal dimension was estimated to be 2.33.
Asunto(s)
Espectroscopía de Terahertz , Enlace de Hidrógeno , Almidón/análogos & derivados , VibraciónRESUMEN
The article presents the results of research aimed at examining the type of swelling material introduced into moulding or core sand to improve their knock-out properties. Tests on Slovak perlite ore (three grain sizes), Hungarian perlite ore and ground vermiculite (South Africa) were carried out. For this purpose, thermal and structural analyses (FTIR-Fourier Transform Infrared Spectroscopy), a chemical composition test (XRF-X-Ray Fluorescence), phase analysis (XRD-X-Ray Diffraction), and scanning electron microscopy (SEM-Scanning Electron Microscope) as well as final strength tests of moulding sands with the addition of perlite ore and vermiculite were carried out. The results of thermal studies were related to IR (Infrared Spectroscopy) spectra and XRD diffractograms. It has been shown that the water content in the pearlite ore is almost three times lower than in vermiculite, but the process of its removal is different. Moreover, the chemical composition of the perlite ore, in particular the alkali content and its grain size, may influence its structure. The phenomena of expansion (perlite) and peeling (vermiculite) have a positive effect on the reduction of the final sand strength and eliminate technological inconveniences (poor knocking out) that significantly limit the wide use of moulding sands with inorganic binders.
RESUMEN
Many investigations are currently being performed to develop the effective synthesis methodology of magnetic nanoparticles with appropriately functionalized surfaces. Here, the novelty of the presented work involves the preparation of nano-sized PEGylated Fe3O4@Ag particles, i.e., the main purpose was the synthesis of magnetic nanoparticles with a functionalized surface. Firstly, Fe3O4 particles were prepared via the Massart process. Next, Ag+ reduction was conducted in the presence of Fe3O4 particles to form a nanosilver coating. The reaction was performed with arabic gum as a stabilizing agent. Sound energy-using sonication was applied to disintegrate the particles' agglomerates. Next, the PEGylation process aimed at the formation of a coating on the particles' surface using PEG (poly(ethylene glycol)) has been performed. It was proved that the arabic gum limited the agglomeration of nanoparticles, which was probably caused by the steric effect caused by the branched compounds from the stabilizer that adsorbed on the surface of nanoparticles. This effect was also enhanced by the electrostatic repulsions. The process of sonication caused the disintegration of aggregates. Formation of iron (II, III) oxide with a cubic structure was proved by diffraction peaks. Formation of a nanosilver coating on the Fe3O4 nanoparticles was confirmed by diffraction peaks with 2θ values 38.15° and 44.35°. PEG coating on the particles' surface was proven via FT-IR (Fourier Transform Infrared Spectroscopy) analysis. Obtained PEG-nanosilver-coated Fe3O4 nanoparticles may find applications as carriers for targeted drug delivery using an external magnetic field.
Asunto(s)
Materiales Biocompatibles Revestidos , Nanopartículas de Magnetita/química , Polietilenglicoles/química , Plata/química , Materiales Biocompatibles Revestidos/síntesis química , Materiales Biocompatibles Revestidos/químicaRESUMEN
The article aims to verify the possibility of obtaining an organic-inorganic material acting as both a binder and a lustrous carbon carrier in bentonite-bonded molding sands. Due to the wide industrial application, organoclays can be considered as innovative materials supporting the foundry technology in meeting environmental requirements. In this study, the organic modification of montmorillonite in calcium bentonite (SN) was performed by poly(acrylic acid) (PAA) and its sodium salt (PAA/Na). Additionally, for the purpose of comparison, the sodium-activated bentonite/poly(acrylic acid) (SN-Na/PAA) composites were also prepared. The collective analysis of the research results used in the assessment of the mineral/polymer interaction mechanism indicates surface adsorption combined with the intercalation of PAA monolayer into the mineral interlayer spaces. Materials were characterized by the combination of Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area analysis and scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS) methods. Based on the XRD analysis, the influence of PAA/Na on the aluminosilicate layered structure was found to be destructive, which may adversely affect the binding properties of SN/PAA/Na composites considered as a potential group of new foundry binders. The SN/PAA and SN-Na/PPA composites (with appropriate polymer content) can act as a binding agent in the synthetic molding sand technology, despite coating the bentonite particles with polymer molecules. The risk of losing the mineral's binding capacity is reduced by the good binding properties of pol(acrylic acid) itself. The article is the first stage (preceding the thermal analysis and the strength tests of molding sands with the prepared organobentonites) in determining the possibility of obtaining a new full-value foundry binder in molding sands with bentonite.
RESUMEN
In the interest of environmental protection, attention should be paid to improving energy efficiency, through the use of appropriate insulations. They can be used in the construction industry, for plastic window frames, and the thermal insulation of buildings. It is also possible to use these materials in the electronics industry, for hermetic casings of devices, in the aviation industry, as well as in the food industry, as collective packaging for frozen food. The technology of using additive 3D printing to create prototype insulating materials made of plastic is proposed in this article. Multi-layer materials, with quadrangle, hexagonal, and triangle closures were designed and printed. A mathematical model was developed, and then experimentally verified. Quadrangle and hexagonal structures were shown to be useful, and triangle structures to be of little use. The optimal size of closure was determined to be 10 mm, with no convection, and 6 mm, with possible convection. The lowest thermal conductivity of the insulation was 0.0591 W/(m·K) for 10 mm single-layer quadrangle and hexagonal closures with an insulation density of 180 kg/m3.
RESUMEN
OBJECTIVE: The aims of this study were to create a cohort of retrospectively collected renal cell carcinoma (RCC) specimens to be used a basis for prognostic molecular studies, and to investigate the outcome and time trends in patients surgically treated for RCC in a single-centre cohort. MATERIALS AND METHODS: Patients undergoing surgery for RCC between 1986 and 2010 were included in the study. Medical records were reviewed, and the diagnostic tissue was re-evaluated according to a modern classification. The change in patient and tumour characteristics over time was analysed. RESULTS: The study included 345 patients. Smaller tumours, as indicated by primary tumour diameter, tumour (T) stage and American Joint Committee on Cancer (AJCC) stage, were found more frequently in later years compared to the early 1990s. No changes in the clinical outcome for the patients were seen among the time periods investigated. Increasing T stage, AJCC stage, primary tumour diameter and decreasing haemoglobin levels were associated with cancer-specific mortality in univariate analysis. A high calcium level was significantly associated with increased cancer-specific mortality (hazard ratio = 4.25, 95% confidence interval 1.36-13.28) in multivariate analysis. CONCLUSIONS: This study on patients who underwent surgery for RCC from 1986 to 2010 at a single institution in Sweden indicates that there has been a change in tumour characteristics of patients diagnosed with RCC over time. It was also shown that calcium levels were an independent prognostic factor for cancer-specific mortality in this cohort. This cohort could provide a valuable basis for further molecular studies.
Asunto(s)
Carcinoma de Células Renales/mortalidad , Carcinoma de Células Renales/patología , Neoplasias Renales/mortalidad , Neoplasias Renales/patología , Adulto , Anciano , Anciano de 80 o más Años , Calcio/sangre , Carcinoma de Células Renales/sangre , Carcinoma de Células Renales/cirugía , Femenino , Humanos , Neoplasias Renales/sangre , Neoplasias Renales/cirugía , Masculino , Persona de Mediana Edad , Estadificación de Neoplasias/tendencias , Estudios Retrospectivos , Tasa de Supervivencia/tendencias , Suecia , Resultado del Tratamiento , Carga TumoralRESUMEN
Strength properties of the microwave cured molding sands containing binders in a form of the aqueous solution of sodium carboxymethyl starch (CMS-Na) are higher than the same molding composition cured by conventional heating. Finding the reason of this effect was the main purpose in this study. Structural changes caused by both physical curing methods of molding sands systems containing mineral matrix (silica sand) and polymer water-soluble binder (CMS-Na) were compared. It was shown, by means of the FT-IR spectroscopic studies, that the activation of the polar groups in the polymer macromolecules structure as well as silanol groups on the mineral matrix surfaces was occurred in the microwave radiation. Binding process in microwave-cured samples was an effect of formation the hydrogen bonds network between hydroxyl and/or carbonyl groups present in polymer and silanol groups present in mineral matrix. FT-IR studies of structural changes in conventional and microwave cured samples confirm that participation of hydrogen bonds is greater after microwave curing than conventional heating.
RESUMEN
The paper deals with the influence of the microwave treatment on sodium carboxymethyl starch (CMS-Na) applied as a binder for moulding sands. The Fourier transformation infrared spectrometry (FT-IR), Raman spectroscopy (FT-Raman) and XRD analysis data of native potato starch and three different carboxymethyl starches (CMS-Na) with various degree of substitution (DS) before and after exposition to microwave radiation have been compared. FT-IR studies showed that polar groups present in CMS-Na structure take part in the formation of new hydrogen bonds network after water evaporation. However, these changes depend on DS value of the modified starch. The FT-Raman study confirmed that due to the impact on the samples by microwave, the changes of intensity in the characteristic bands associated with the crystalline regions in the sample were noticed. The X-ray diffraction data for microwave treated CMS-Na samples have been compared with the diffractograms of initial materials and analysis of XRD patterns confirmed that microwave-treated samples exhibit completely amorphous structure. Analysis of structural changes allows to state that the binding of sand grains in moulding sand with CMS-Na polymeric binder consists in the formation of hydrogen bonds networks (physical cross-linking).
RESUMEN
Currently, increasing attention is being paid to issues related to environmental protection, waste management, as well as to the development of polymers with useful properties. The research presented here involved preparation of hydrogels based on Beetosan® - a chitosan derived from the multi-stage processing of dead bees. Moreover, hydrogels were additionally modified with natural substances - i.e. bee pollen and extract of Salvia officinalis (sage) that are well known for the presence of many compounds with beneficial properties from a medical point of view. Materials have been first obtained by photopolymerization. Then, their surface morphology, wettability and cytotoxicity to selected cell lines have been determined. It can be stated that such combination of Beetosan® hydrogel matrix and the mentioned additives resulted in a preparation of polymers characterized by negative impact on cancer cells. Impact of hydrogels with sage is slightly more intense due to the presence of substances such as ursalic or rosmaric acid that are characterized to have anticancer activity. Such negative impact has not been observed in case of studies using fibroblasts. Furthermore, addition of natural substances into hydrogels resulted in a more homogeneous surface and in the decrease of wettability angle of the tested polymers. It can be concluded that the use of natural-derived reagents and synthesis of polymers using these reagents (as a result of environmentally friendly photopolymerization) yields materials with interesting properties for medical purposes, with particular emphasis on antitumor activity, and without significant negative impact on fibroblasts.
Asunto(s)
Hidrogeles/química , Hidrogeles/toxicidad , Polen/química , Animales , Abejas , Quitosano/química , Humanos , Células Jurkat , Microscopía Electrónica de Rastreo , Salvia officinalis , Pruebas de ToxicidadRESUMEN
The hardening process of moulding sands on quartz matrices bound by polymer binders containing carboxyl and hydroxyl groups can be carried out by using physical (microwave radiation, thermal holding) and chemical (Ca(2+) cations, glutaraldehyde) cross-linking agents. The highest hardening level obtain moulding sand samples containing binders in a form of the aqueous composition of poly(acrylic acid)/sodium salt of carboxymethyl starch (PAA/CMS-Na) within the microwave radiation field, for which the bending strength is of 1.6 MPa value even after 24h from ending the agent activity. The authors focused, in this study, on finding the reason of this effect. It was shown, by means of the FT-IR and FT-Raman spectroscopic methods, that the chemical adsorption process activated by microwaves plays an essential role. The applied microwaves activate the polar groups present in the polymer composition structure as well as the quartz crystals surfaces (silane groups). Then the chemical adsorption occurs in the binder-matrix system within the microwave radiation field and intermolecular lattices are formed with a participation of hydrogen bridges (SiOHâ¯OC, SiOHâ¯OH) and COSi type bonds.
RESUMEN
FT-IR and FT-Raman spectroscopic methods allowed to identify the cross-linking process of the aqueous composition of poly(acrylic acid)/sodium salt of carboxymethyl starch (PAA/CMS-Na) applied as a binder for moulding sands. The cross-linking was performed by chemical methods by introducing cross-linking substances with Ca(2+) ions or glutaraldehyde and by physical way, applying the microwave radiation. It was found that Ca(2+) ions cause formation of cross-linking ionic bonds within carboxyl and carboxylate groups. Glutaraldehyde generates formation of cross-linking bonds with hemiacetal and acetal structures. Whereas in the microwave radiation field, due to dehydration, lattices are formed by anhydride bonds.