RESUMEN
Recently, aqueous solutions polluted by BPA have been bioremediated by us using laccase immobilized on hydrophobic membranes in non-isothermal bioreactors. BPA degradation was checked using analytical methods. To assess in vitro the occurred bioremediation, the proliferation and viability indexes of MCF-7 cells incubated in the presence of aqueous solutions of BPA, or of enzyme-treated BPA solutions, have been measured as a function of the initial BPA concentration. The results demonstrated that: i) at each initial BPA concentration used, both the proliferation and viability indexes are a function of the duration of enzyme treatment; ii) proliferation and viability are uncoupled biological processes with respect to BPA enzyme treatment. Non-isothermal bioreactors are a useful tool for the bioremediation of aqueous solutions polluted by BPA, which is an example of an endocrine disruptor that belongs to the alkyl phenol family.
Asunto(s)
Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Disruptores Endocrinos/metabolismo , Disruptores Endocrinos/toxicidad , Lacasa/metabolismo , Fenoles/metabolismo , Fenoles/toxicidad , Compuestos de Bencidrilo , Línea Celular Tumoral , Humanos , Fenoles/antagonistas & inhibidoresRESUMEN
Different tyrosinase carbon paste modified electrodes to determine bisphenol A (BPA) concentration in aqueous solutions have been constructed. Variables examined were in the carbon paste composition and in particular: (i) the immobilized enzyme amount; (ii) the carbon type (powder, single or multi-walled nanotubes); (iii) the nature of the pasting oil (mineral oil, hexadecane and dodecane). For each biosensor type the amperometric response was evaluated with reference to the linear range and sensitivity. Constant reference has been made to the amperometric signals obtained, under the same experimental conditions, towards the catechol, a specific phenolic substrate for tyrosinase. The most efficient biosensors were those constructed by using the following composition for the carbon paste: 10% of tyrosinase, 45% of single wall carbon nanotubes (SWCN) and 45% of mineral oil. This biosensor formulation displayed the following electrochemical characteristics: a sensitivity equal to 138 microA/mM, LOD of 0.02 microM (based on three times the S/N ratio), linear range of 0.1-12 microM and response time of 6 min. This experimental work represents a first attempt at construction of a new carbon nanotube-tyrosinase based biosensor able to determine the concentration of BPA, one of the most ubiquitous and hazardous endocrine disruptors which can pollute the drinking and surface water, as well as many products of the food chain.
Asunto(s)
Técnicas Biosensibles/instrumentación , Carbono/química , Electroquímica/instrumentación , Monitoreo del Ambiente/instrumentación , Monofenol Monooxigenasa/química , Fenoles/análisis , Compuestos de Bencidrilo , Técnicas Biosensibles/métodos , Electroquímica/métodos , Monitoreo del Ambiente/métodos , Enzimas Inmovilizadas/química , Diseño de Equipo , Análisis de Falla de Equipo , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
The diffusion of peritoneal dialysis (PD) at home is somewhat restricted by the difficulty of transport and storage of a large amount of dialytic solutions. This problem is exacerbated in the case of hemodialysis. With the aim of producing pure water to be used in preparing the solution for peritoneal dialysis, or for hemodialysis in general, as one example, we purified the spent dialysate solution from PD. Experiments were carried out with 24 dialysate solutions taken from 8 patients. Pure water was obtained by means of a thermodialysis process in a hollow fiber reactor operating under nonisothermal conditions. Results show that the yield of the nonisothermal process is dependent on the temperature difference applied across the hydrophobic membranes. The production of pure water per square meter of membrane and per hour was equal to 0.55 or 1.2 or 2.0 liters, with a temperature difference of 11 degrees C or 21 degrees C or 28 degrees C, respectively. These results encourage the use of the thermodialysis process in the production of pure water for clinical uses.
Asunto(s)
Soluciones para Hemodiálisis/química , Residuos Sanitarios , Diálisis Peritoneal , Agua/análisis , Reactores Biológicos , Humanos , TemperaturaRESUMEN
A study of the influence of electromagnetic fields (EMF) of various frequencies, from 50 up to 400 Hz, on the catalytic activity of soluble and insoluble horseradish peroxidase (POD) was carried out. To simulate the conditions in which the enzyme operates in vivo, the POD was immobilized by entrapment on a gelatin membrane or by covalent attachment on a nylon graft membrane. The rate of inactivation of the soluble POD was found to exhibit positive and negative interactions with the 1 mT applied magnetic field, with an optimum positive effect at 130 Hz. The immobilized PODs, on the contrary, do not exhibit negative interactions, but show a maximum positive interaction at 150 Hz when entrapped and at 170 Hz when covalently attached. At 50 Hz and at frequencies higher than 250 Hz no effects were observed with insoluble POD. The optimum frequency of positive interaction between the EMF and the catalytic activity of the insoluble enzymes is shifted with respect to that of the soluble enzymes towards higher frequencies, the size of the shifts being dependent on the intensity of the physical forces involved in the immobilization process.
Asunto(s)
Electricidad , Campos Electromagnéticos , Peroxidasa de Rábano Silvestre/química , Peroxidasa de Rábano Silvestre/efectos de la radiación , Catálisis/efectos de la radiación , Relación Dosis-Respuesta en la Radiación , Activación Enzimática/efectos de la radiación , Enzimas Inmovilizadas/química , Enzimas Inmovilizadas/efectos de la radiación , Dosis de RadiaciónRESUMEN
This work studies protease concentration decrease in aqueous solutions in contact with a modified polyethersulphone graft membrane onto which antiproteases were immobilized. As a model of protease/antiprotease interaction, elastase and alpha1-antitrypsin were used. Experiments were carried out either under fixed amounts of immobilized antiproteases and variable protease concentration or under fixed protease concentration and variable amounts of immobilized antiproteases. In both cases, active protease concentrations decreased with increase in contact time with the membrane. Experimental conditions under which active elastase concentration becomes zero were also found. Occurrence of the same phenomenology has also been ascertained with protease solutions obtained from human blood neutrophils. The membrane activated with alpha1-antitrypsin showed differential inhibitory power on elastase and cathepsin G. This technology could open new perspectives in manufacturing new membranes to be used in hemodialysis and extracorporeal circulation when elastase is released.
Asunto(s)
Circulación Extracorporea/efectos adversos , Inflamación/prevención & control , Neutrófilos/metabolismo , Elastasa Pancreática/metabolismo , Inhibidores de Proteasas/uso terapéutico , Diálisis Renal/efectos adversos , alfa 1-Antitripsina/metabolismo , Puente Cardiopulmonar/efectos adversos , Simulación por Computador , Eritrocitos/metabolismo , Humanos , Inflamación/etiologíaRESUMEN
The effect of methanol on the kinetically controlled synthesis of cephalexin by free and immobilized penicillin G acylase (PGA) was investigated. Catalytic and hydrophobic membranes were obtained by chemical grafting, activation, and PGA immobilization on hydrophobic nylon supports. Butyl methacrylate (BMA) was used as graft monomer. Increasing concentrations of methanol were found to cause a greater deleterious effect on the activity of free than on that of the immobilized enzyme. Methanol, however, improved the kinetic stability of cephalexin synthesized by free PGA, resulting in higher maximum yields. By contrast, immobilized PGA reached 100% yields even in the absence of the cosolvent. Cephalexin synthesis by the catalytic membrane was also performed in a non-isothermal bioreactor. Under these conditions, a 94% increase of the synthetic activity and complete conversion of the limiting substrate to cephalexin were obtained. The addition of methanol reduced the non-isothermal activity increase. The physical cause responsible for the non-isothermal behavior of the hydrophobic catalytic membrane was identified in the process of thermodialysis.
Asunto(s)
Cefalexina/síntesis química , Membranas Artificiales , Metanol/química , Penicilina Amidasa/química , Temperatura , Agua/química , Antibacterianos/síntesis química , Reactores Biológicos , Catálisis , Cefalosporinas/química , Activación Enzimática , Enzimas Inmovilizadas/química , Escherichia coli/enzimología , Interacciones Hidrofóbicas e Hidrofílicas , Metacrilatos/química , Nylons , Penicilina Amidasa/metabolismo , Glicoles de Propileno/química , Sensibilidad y EspecificidadRESUMEN
A modified polyethersulphone graft membrane was loaded with antiproteases, with the aim of reducing the active protease blood concentration during hemodialysis in acute catabolic renal failure or cardiopulmonary bypass. As protease/antiprotease system, elastase and alpha1-antitrypsin were used. The concentration of active elastase in aqueous solutions decreased as function of contact time with the membrane, approaching saturation. A 40% loss of elastase activity was obtained at pH 7.4, which was not due to autolysis, which accounted for 5% of the loss. The highest reduction was achieved at pH 9.0 (25% higher than at pH 7.4). The saturation level of elastase decrease, calculated by means of the Einstein equation, was reached after more than 47 minutes. We speculate that a time reduction might be achieved either increasing the concentration of immobilized antiproteases, or increasing the rate of elastase movement across the membranes by hydraulic, osmotic, or temperature gradients. This technology can be applied to hemodialysis, and in extracorporeal blood circulation to promote elastase release.