NMR studies of polymeric sodium ion conductors-a brief review.

Sodium has long been considered an alternative active battery cation to lithium because of the chemical similarity and the overwhelming natural abundance of Na compared to Li. In the "early days" of poly (ethylene oxide) (PEO) and alkali metal salt complexes proposed as polymer electrolytes, studies of Na-salt/PEO materials were nearly as prevalent as those of lithium analogues. Fast forwarding to the present day, there is growing interest in sodium battery chemistry spurred by the challenges of continued advancement in lithium-based batteries. This article reviews the progress made in sodium-based polymer electrolytes from the early days of PEO to the present time. Other polymeric electrolytes such as gel polymer electrolytes (GPE), including formulations based on ionic liquids (ILs), are also discussed.

Sodium Rich Vanadium Oxy-Fluorophosphate - Na3.2 Ni0.2 V1.8 (PO4 )2 F2 O - as Advanced Cathode for Sodium Ion Batteries.

Conventional sodium-based layered oxide cathodes are extremely air sensitive and possess poor electrochemical performance along with safety concerns when operating at high voltage. The polyanion phosphate, Na3 V2 (PO4 )3 stands out as an excellent candidate due to its high nominal voltage, ambient air stability, and long cycle life. The caveat is that Na3 V2 (PO4 )3 can only exhibit reversible capacities in the range of 100 mAh g-1 , 20% below its theoretical capacity. Here, the synthesis and characterizations are reported for the first time of the sodium-rich vanadium oxyfluorophosphate, Na3.2 Ni0.2 V1.8 (PO4 )2 F2 O, a tailored derivative compound of Na3 V2 (PO4 )3 , with extensive electrochemical and structural analyses. Na3.2 Ni0.2 V1.8 (PO4 )2 F2 O delivers an initial reversible capacity of 117 mAh g-1 between 2.5 and 4.5 V under the 1C rate at room temperature, with 85% capacity retention after 900 cycles. The cycling stability is further improved when the material is cycled at 50 °C within 2.8-4.3 V for 100 cycles. When paired with a presodiated hard carbon, Na3.2 Ni0.2 V1.8 (PO4 )2 F2 O cycled with a capacity retention of 85% after 500 cycles. Cosubstitution of the transition metal and fluorine in Na3.2 Ni0.2 V1.8 (PO4 )2 F2 O as well as the sodium-rich structure are the major factors behind the improvement of specific capacity and cycling stability, which paves the way for this cathode in sodium-ion batteries.

Broadband NMR Relaxometry as a Powerful Technique to Study Molecular Dynamics of Ionic Liquids.

Fast field cycling nuclear magnetic resonance (FFC NMR) relaxometry technique has been demonstrated to be a useful analytical tool to investigate molecular dynamics in very diverse systems during the last decades. Of particular importance has been its application in studying ionic liquids, upon which this review article is based. Some of the research carried out on ionic liquids during the last ten years using this technique is highlighted in this article with the aim of promoting the favorable features of FFC NMR applied toward understanding dynamics of complex systems.

A high-performance hydroxide exchange membrane enabled by Cu2+-crosslinked chitosan.

Ion exchange membranes are widely used to selectively transport ions in various electrochemical devices. Hydroxide exchange membranes (HEMs) are promising to couple with lower cost platinum-free electrocatalysts used in alkaline conditions, but are not stable enough in strong alkaline solutions. Herein, we present a Cu2+-crosslinked chitosan (chitosan-Cu) material as a stable and high-performance HEM. The Cu2+ ions are coordinated with the amino and hydroxyl groups of chitosan to crosslink the chitosan chains, forming hexagonal nanochannels (~1 nm in diameter) that can accommodate water diffusion and facilitate fast ion transport, with a high hydroxide conductivity of 67 mS cm-1 at room temperature. The Cu2+ coordination also enhances the mechanical strength of the membrane, reduces its permeability and, most importantly, improves its stability in alkaline solution (only 5% conductivity loss at 80 °C after 1,000 h). These advantages make chitosan-Cu an outstanding HEM, which we demonstrate in a direct methanol fuel cell that exhibits a high power density of 305 mW cm-2. The design principle of the chitosan-Cu HEM, in which ion transport channels are generated in the polymer through metal-crosslinking of polar functional groups, could inspire the synthesis of many ion exchange membranes for ion transport, ion sieving, ion filtration and more.

Acid-in-Clay Electrolyte for Wide-Temperature-Range and Long-Cycle Proton Batteries.

Proton conduction underlies many important electrochemical technologies. A family of new proton electrolytes is reported: acid-in-clay electrolyte (AiCE) prepared by integrating fast proton carriers in a natural phyllosilicate clay network, which can be made into thin-film (tens of micrometers) fluid-impervious membranes. The chosen example systems (sepiolite-phosphoric acid) rank top among the solid proton conductors in terms of proton conductivities (15 mS cm-1 at 25 °C, 0.023 mS cm-1 at -82 °C), electrochemical stability window (3.35 V), and reduced chemical reactivity. A proton battery is assembled using AiCE as the solid electrolyte membrane. Benefitting from the wider electrochemical stability window, reduced corrosivity, and excellent ionic selectivity of AiCE, the two main problems (gassing and cyclability) of proton batteries are successfully solved. This work draws attention to the element cross-over problem in proton batteries and the generic "acid-in-clay" solid electrolyte approach with superfast proton transport, outstanding selectivity, and improved stability for room- to cryogenic-temperature protonic applications.

Nanoscale Hybrid Electrolytes with Viscosity Controlled Using Ionic Stimulus for Electrochemical Energy Conversion and Storage.

As renewable energy is rapidly integrated into the grid, the challenge has become storing intermittent renewable electricity. Technologies including flow batteries and CO2 conversion to dense energy carriers are promising storage options for renewable electricity. To achieve this technological advancement, the development of next generation electrolyte materials that can increase the energy density of flow batteries and combine CO2 capture and conversion is desired. Liquid-like nanoparticle organic hybrid materials (NOHMs) composed of an inorganic core with a tethered polymeric canopy (e.g., polyetheramine (HPE)) have a capability to bind chemical species of interest including CO2 and redox-active species. In this study, the unique response of NOHM-I-HPE-based electrolytes to salt addition was investigated, including the effects on solution viscosity and structural configurations of the polymeric canopy, impacting transport behaviors. The addition of 0.1 M NaCl drastically lowered the viscosity of NOHM-based electrolytes by up to 90%, reduced the hydrodynamic diameter of NOHM-I-HPE, and increased its self-diffusion coefficient, while the ionic strength did not alter the behaviors of untethered HPE. This study is the first to fundamentally discern the changes in polymer configurations of NOHMs induced by salt addition and provides a comprehensive understanding of the effect of ionic stimulus on their bulk transport properties and local dynamics. These insights could be ultimately employed to tailor transport properties for a range of electrochemical applications.

Dynamics of Glyceline and Interactions of Constituents: A Multitechnique NMR Study.

The dynamics of the organic components of the deep eutectic solvent (DES) glyceline are analyzed using an array of complementary nuclear magnetic resonance (NMR) methods. Fast-field cycling 1H relaxometry, pulsed field gradient diffusion, nuclear overhauser effect spectroscopy (NOESY), 13C NMR relaxation, and pressure-dependent NMR experiments are deployed to sample a range of frequencies and modes of motion of the glycerol and choline components of the DES. Generally, translational and rotational diffusion of glycerol are more rapid than those of choline while short-range rotational motions observed from 13C relaxation indicate slow local motion of glycerol at low choline chloride (ChCl) content. The rates of glycerol and choline local motions become more similar at higher ChCl. This result taken together with pressure-dependent NMR studies show that the addition of ChCl makes it easier to disrupt glycerol packing. Finally, a relatively slow hydroxyl H-exchange process between glycerol and choline protons is deduced from the data. Consistent with this, NOESY results indicate relatively little direct H-bonding between glycerol and choline. These results suggest that the glycerol H-bonding network is disrupted as choline is added, but primarily in regions where there is intimate mixing of the two components. Thus, the local dynamics of most of the glycerol resembles that of pure glycerol until substantial choline chloride is present.

Copper-coordinated cellulose ion conductors for solid-state batteries.

Although solid-state lithium (Li)-metal batteries promise both high energy density and safety, existing solid ion conductors fail to satisfy the rigorous requirements of battery operations. Inorganic ion conductors allow fast ion transport, but their rigid and brittle nature prevents good interfacial contact with electrodes. Conversely, polymer ion conductors that are Li-metal-stable usually provide better interfacial compatibility and mechanical tolerance, but typically suffer from inferior ionic conductivity owing to the coupling of the ion transport with the motion of the polymer chains1-3. Here we report a general strategy for achieving high-performance solid polymer ion conductors by engineering of molecular channels. Through the coordination of copper ions (Cu2+) with one-dimensional cellulose nanofibrils, we show that the opening of molecular channels within the normally ion-insulating cellulose enables rapid transport of Li+ ions along the polymer chains. In addition to high Li+ conductivity (1.5 × 10-3 siemens per centimetre at room temperature along the molecular chain direction), the Cu2+-coordinated cellulose ion conductor also exhibits a high transference number (0.78, compared with 0.2-0.5 in other polymers2) and a wide window of electrochemical stability (0-4.5 volts) that can accommodate both the Li-metal anode and high-voltage cathodes. This one-dimensional ion conductor also allows ion percolation in thick LiFePO4 solid-state cathodes for application in batteries with a high energy density. Furthermore, we have verified the universality of this molecular-channel engineering approach with other polymers and cations, achieving similarly high conductivities, with implications that could go beyond safe, high-performance solid-state batteries.

CO2 utilization in built environment via the PCO2 swing carbonation of alkaline solid wastes with different mineralogy.

Carbon mineralization to solid carbonates is one of the reaction pathways that can not only utilize captured CO2 but also potentially store it in the long term. In this study, the dissolution and carbonation behaviors of alkaline solid wastes (i.e., waste concrete) was investigated. Concrete is one of the main contributors to a large carbon emission in the built environment. Thus, the upcycling of waste concrete via CO2 utilization has multifaceted environmental benefits including CO2 emission reduction, waste management and reduced mining. Unlike natural silicate minerals such as olivine and serpentine, alkaline solid wastes including waste concrete are highly reactive, and thus, their dissolution and carbonation behaviors vary significantly. Here, both conventional acid (e.g., hydrochloric acid) and less studied carbonic acid (i.e., CO2 saturated water) solvent systems were explored to extract Ca from concrete. Non-stoichiometric dissolution behaviors between Ca and Si were confirmed under far-from-equilibrium conditions (0.1 wt% slurry density), and the re-precipitation of the extracted Si was observed at near-equilibrium conditions (5 wt% slurry density), when the Ca extraction was performed at a controlled pH of 3. These experiments, with a wide range of slurry densities, provided valuable insight into Si re-precipitation phenomena and its effect on the mass transfer limitation during concrete dissolution. Next, the use of the partial pressure of CO2 for the pH swing carbon mineralization process was investigated for concrete, and the results were compared to those of Mg-bearing silicate minerals. In the PCO2 swing process, the extraction of Ca was significantly limited by the precipitation of the carbonate phase (i.e., calcite), since CO2 bubbling could not provide a low enough pH condition for concrete-water-CO2 systems. Thus, this study showed that the two-step carbon mineralization via PCO2 swing, that has been developed for Mg-bearing silicate minerals, may not be viable for highly reactive Ca-bearing silicate materials (e.g., concrete). The precipitated calcium carbonate (PCC) derived from waste concrete via a pH swing process showed very promising results with a high CO2 utilization potential as an upcycled construction material.

High-Dose-Rate Brachytherapy for the Treatment of Basal and Squamous Cell Carcinomas on Sensitive Areas of the Face: A Report of Clinical Outcomes and Acute and Subacute Toxicities.

PURPOSE: Basal cell and cutaneous squamous cell carcinoma are common malignancies (keratinocyte carcinomas [KCs]). Surgical resection is the standard of care. Radiation using high-dose rate brachytherapy (HDR-BT) may serve as a superior alternative where surgical scars may be of cosmetic concern or in elderly patients with significant comorbidity. We aim to describe the clinical and cosmetic outcomes as well as posttreatment radiation toxicities associated with HDR-BT in patients who were treated for KCs of the face. METHODS AND MATERIALS: Patients with KCs treated with HDR-BT from 2015 to 2018 were included in the study. Patient medical records and clinical photos were reviewed at multiple time points: start of treatment, end of treatment, short-term (2 week) follow-up, 3-month follow-up, and if needed at 6 months. Radiation toxicity was graded using the Radiation Therapy Oncology Grading (RTOG) acute toxicity scale. Median (range) toxicity grades at follow-up intervals were calculated. Clinical outcomes including local recurrence were evaluated for all patients. RESULTS: The study included 19 patients and 20 KCs. The median radiation dose was 42 Gy (39-42 Gy) over 6 fractions. The median toxicity at completion of treatment was RTOG grade 2 (85% of patients). At short-term follow-up, 50% of patients (n = 10) improved to RTOG grade 1 (0-2). At 3 months, 70% of patients (n = 14) had RTOG grade 0, and by 6 months, 100% of patients (n = 18) had RTOG grade 0. No RTOG grade 3 or higher skin toxicity was observed. With a median follow-up of 7.2 months (range, 1.3-54.4 months), the local recurrence-free survival was 95%. CONCLUSIONS: We demonstrate that HDR-BT can be used as definitive treatment of KCs of the face with excellent cosmetic outcomes and local control. Acute and subacute skin toxicities were most commonly RTOG grade 2 or less with resolution of patient's skin toxicity by 3 months.

Investigation of Glass-Ceramic Lithium Thiophosphate Solid Electrolytes Using NMR and Neutron Scattering.

Solid-state Li batteries require solid electrolytes which have high Li+ conductivity and good chemical/mechanical compatibility with Li metal anodes and high energy cathodes. Structure/function correlations which relate local bonding to macroscopic properties are needed to guide development of new solid electrolyte materials. This study combines diffraction measurements with solid-state nuclear magnetic resonance spectroscopy (ssNMR) and neutron pair distribution function (nPDF) analysis to probe the short-range vs. long-range structure of glass-ceramic Li3PS4-based solid electrolytes. This work demonstrates how different synthesis conditions (e.g., solvent selection and thermal processing) affect the resulting polyanionic network. More specifically, structures with high P coordination numbers (e.g., PS4 3- and P2S7 4-) correlate with higher Li+ mobility compared to other polyanions (e.g., (PS3)n n- chains and P2S6 4-). Overall, this work demonstrates how ssNMR and nPDF can be used to draw key structure/function correlations for solid-state superionic conductors.

Li-Ion Diffusion in Nanoconfined LiBH4-LiI/Al2O3: From 2D Bulk Transport to 3D Long-Range Interfacial Dynamics.

Solid electrolytes based on LiBH4 receive much attention because of their high ionic conductivity, electrochemical robustness, and low interfacial resistance against Li metal. The highly conductive hexagonal modification of LiBH4 can be stabilized via the incorporation of LiI. If the resulting LiBH4-LiI is confined to the nanopores of an oxide, such as Al2O3, interface-engineered LiBH4-LiI/Al2O3 is obtained that revealed promising properties as a solid electrolyte. The underlying principles of Li+ conduction in such a nanocomposite are, however, far from being understood completely. Here, we used broadband conductivity spectroscopy and 1H, 6Li, 7Li, 11B, and 27Al nuclear magnetic resonance (NMR) to study structural and dynamic features of nanoconfined LiBH4-LiI/Al2O3. In particular, diffusion-induced 1H, 7Li, and 11B NMR spin-lattice relaxation measurements and 7Li-pulsed field gradient (PFG) NMR experiments were used to extract activation energies and diffusion coefficients. 27Al magic angle spinning NMR revealed surface interactions of LiBH4-LiI with pentacoordinated Al sites, and two-component 1H NMR line shapes clearly revealed heterogeneous dynamic processes. These results show that interfacial regions have a determining influence on overall ionic transport (0.1 mS cm-1 at 293 K). Importantly, electrical relaxation in the LiBH4-LiI regions turned out to be fully homogenous. This view is supported by 7Li NMR results, which can be interpreted with an overall (averaged) spin ensemble subjected to uniform dipolar magnetic and quadrupolar electric interactions. Finally, broadband conductivity spectroscopy gives strong evidence for 2D ionic transport in the LiBH4-LiI bulk regions which we observed over a dynamic range of 8 orders of magnitude. Macroscopic diffusion coefficients from PFG NMR agree with those estimated from measurements of ionic conductivity and nuclear spin relaxation. The resulting 3D ionic transport in nanoconfined LiBH4-LiI/Al2O3 is characterized by an activation energy of 0.43 eV.

NMR Relaxometry and Diffusometry Analysis of Dynamics in Ionic Liquids and Ionogels for Use in Lithium-Ion Batteries.

We have investigated the charge transport dynamics of a novel solid-like electrolyte material based on mixtures of the ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([BMIM] TFSI) and various concentrations of lithium salt bis(trifluoromethylsulfonyl)imide (LiTFSI) confined within a SiO2 matrix, prepared via a sol-gel method. The translational diffusion coefficients of BMIM+, TFSI-, and Li+ in ILs and confined ILs (ionogels, IGs) with different concentrations of lithium salt have been measured at variable temperatures, covering the 20-100 °C range, using nuclear magnetic resonance (NMR) pulsed field gradient diffusion spectroscopy. The mobility of BMIM+, TFSI-, and Li+ was found to increase with the [BMIM] TFSI/LiTFSI ratio, exhibiting an almost liquid-like mobility in IGs. Additionally, the effect of confinement on IL rotational dynamics has been analyzed by measuring 1H, 19F, and 7Li spin-lattice relaxation rate dispersions of IGs at different temperatures, using fast field-cycling NMR relaxometry. The analysis of the experimental data was performed assuming the existence of two fractions of the liquid: a bulk fraction (at least several ionic radii from the silica particles) and a surface fraction (close to the silica particles) and using two different models based on translational and rotational diffusion and reorientation mediated by translational displacements. The existence and weighting of these two fractions of ions were obtained from the direct diffusion measurements. The results show that the ion dynamics slowed only modestly under confinement, which evidences that IGs preserve IL transport properties, and this behavior is an encouraging indication for using IGs as a solid electrolyte for Li+ batteries.

Modulation of Cation Diffusion by Reversible Supramolecular Assemblies in Ionic Liquid-Based Nanocomposites.

Ionic liquid (IL) properties, such as high ionic conductivity under ambient conditions combined with nontoxicity and nonflammability, make them important materials for future technologies. Despite high ion conductivity desired for battery applications, cation transport numbers in ILs are not sufficient enough to attain high power density batteries. Thus, developing novel approaches directed toward improvement of cation transport properties is required for the application of ILs in energy-storing devices. In this effort, we used various experimental techniques to demonstrate that the strategy of mixing ILs with ultrasmall (1.8 nm) nanoparticles (NPs) resulted in melt-processable composites with improved transport numbers for cations at room temperature. This significant enhancement in the transport number was attributed to the specific chemistry of NPs exhibiting a weaker cation and stronger anion coordination at ambient temperature. At high temperature, significantly weakened NP-anion associations promoted a liquid-like behavior of composites, highlighting the melt-processability of these composites. These results show that designing a reversible dynamic noncovalent NP-anion association controlled by the temperature may constitute an effective strategy to control ion diffusion. Our studies provide fundamental insights into mechanisms driving the charge transport and offer practical guidance for the design of melt-processable composites with an improved cation transport number under ambient conditions.

NMR Investigations of Crystalline and Glassy Solid Electrolytes for Lithium Batteries: A Brief Review.

The widespread use of energy storage for commercial products and services have led to great advancements in the field of lithium-based battery research. In particular, solid state lithium batteries show great promise for future commercial use, as solid electrolytes safely allow for the use of lithium-metal anodes, which can significantly increase the total energy density. Of the solid electrolytes, inorganic glass-ceramics and Li-based garnet electrolytes have received much attention in the past few years due to the high ionic conductivity achieved compared to polymer-based electrolytes. This review covers recent work on novel glassy and crystalline electrolyte materials, with a particular focus on the use of solid-state nuclear magnetic resonance spectroscopy for structural characterization and transport measurements.

Role of Retinoic Acid Receptor-γ in DNA Damage-Induced Necroptosis.

DNA-damaging compounds, commonly used as chemotherapeutic drugs, are known to trigger cells to undergo programmed cell death such as apoptosis and necroptosis. However, the molecular mechanism of DNA damage-induced cell death is not fully understood. Here, we report that RARγ has a critical role in DNA damage-induced programmed cell death, specifically in necroptosis. The loss of RARγ abolishes the necroptosis induced by DNA damage. In addition, cells that lack RARγ are less susceptible to extrinsic apoptotic pathway activated by DNA-damaging agents whereas the intrinsic apoptotic pathway is not affected. We demonstrate that RARγ is essential for the formation of RIPK1/RIPK3 death complex, known as Ripoptosome, in response to DNA damage. Furthermore, we show that RARγ plays a role in skin cancer development by using RARγ1 knockout mice and human squamous cell carcinoma biopsies. Hence, our study reveals that RARγ is a critical component of DNA damage-induced cell death.

Review of Recent Nuclear Magnetic Resonance Studies of Ion Transport in Polymer Electrolytes.

Current and future demands for increasing the energy density of batteries without sacrificing safety has led to intensive worldwide research on all solid state Li-based batteries. Given the physical limitations on inorganic ceramic or glassy solid electrolytes, development of polymer electrolytes continues to be a high priority. This brief review covers several recent alternative approaches to polymer electrolytes based solely on poly(ethylene oxide) (PEO) and the use of nuclear magnetic resonance (NMR) to elucidate structure and ion transport properties in these materials.

Polymer Capacitor Dielectrics for High Temperature Applications.

Much effort has been invested for nearly five decades to identify and develop new polymer capacitor dielectrics for higher than ambient temperature applications. Simultaneous demands of processability, dielectric permittivity, thermal conductivity, and dielectric breakdown strength dictated by increasing high power performance criteria limit the number of available materials. The present review first explains the advantages of metallized polymer film capacitors over the film-foil, ceramic, and electrolytic counterparts and then presents a comprehensive review on both past developmental effort of commercial resins and recent research progress on new polymers targeted for operating temperature above 150 °C. Some historical background and discussion on the limitation of the commercially available polymer film dielectrics for high temperature applications are also given. In many cases, further development of promising polymers that appear to possess all or most of the important criteria is limited by lack of large scale market incentives but could be of great value to niche applications in the military or aerospace realm.

Enhanced Lithium Oxygen Battery Using a Glyme Electrolyte and Carbon Nanotubes.

The lithium oxygen battery has a theoretical energy density potentially meeting the challenging requirements of electric vehicles. However, safety concerns and short lifespan hinder its application in practical systems. In this work, we show a cell configuration, including a multiwalled carbon nanotube electrode and a low flammability glyme electrolyte, capable of hundreds of cycles without signs of decay. Nuclear magnetic resonance and electrochemical tests confirm the suitability of the electrolyte in a practical battery, whereas morphological and structural aspects revealed by electron microscopy and X-ray diffraction demonstrate the reversible formation and dissolution of lithium peroxide during the electrochemical process. The enhanced cycle life of the cell and the high safety of the electrolyte suggest the lithium oxygen battery herein reported as a viable system for the next generation of high-energy applications.

Correlating Li+-Solvation Structure and its Electrochemical Reaction Kinetics with Sulfur in Subnano Confinement.

Combining theoretical and experimental approaches, we investigate the solvation properties of Li+ ions in a series of ether solvents (dimethoxyethane, diglyme, triglyme, tetraglyme, and 15-crown-5) and their subsequent effects on the solid-state lithium-sulfur reactions in subnano confinement. The ab initio and classical molecular dynamics (MD) simulations predict Li+ ion solvation structures within ether solvents in excellent agreement with experimental evidence from electrospray ionization-mass spectroscopy. An excellent correlation is also established between the Li+-solvation binding energies from the ab initio MD simulations and the lithiation overpotentials obtained from galvanostatic intermittent titration techniques (GITT). These findings convincingly indicate that a stronger solvation binding energy imposes a higher lithiation overpotential of sulfur in subnano confinement. The mechanistic understanding achieved at the electronic and atomistic level of how Li+-solvation dictates its electrochemical reactions with sulfur in subnano confinement provides invaluable guidance in designing future electrolytes and electrodes for Li-sulfur chemistry.