RESUMEN
The technique of grafting side chains onto a linear polymeric backbone is commonly used to confer to the new polymeric material with desired properties, such as tunable solubility, ionic charge, biocompatibility, or specific interactions with biological systems. In this paper, two new polybenzofulvene backbones were assembled by spontaneous polymerization of the appropriate benzofulvene monomers (4,6-PO-BF3k and 4',6-PO-BF3k) bearing two clickable propargyloxy groups in different positions of the 3-phenylindene scaffold. Poly-4,6-PO-BF3k and poly-4',6-PO-BF3k were grafted with monomethyl oligo(ethylene glycol) (MOEG) to prepare two new polybenzofulvene brushes (i.e., poly-4,6-MOEG-9-TM-BF3k and poly-4',6-MOEG-9-TM-BF3k) by means of a "grafting onto" approach, that were characterized from the point of view of their macromolecular features, aggregation liability, and in a preliminary evaluation of biocompatibility. The obtained results make these PEGylated polybenzofulvene brushes (PPBFB) derivatives potentially useful as nanocarriers for nanoencapsulation and delivery of drug molecules.
RESUMEN
Two small series of quinoline derivatives were designed starting from previously published quinoline derivatives 7a and b in order to obtain information about their interaction with the 5-HT4R binding site. Initially, the structure of 7a and b was modified by replacing their basic moiety with that of partial agonist 4 (ML10302) or with that of reference ligand 6 (RS-67-333). Then, the aromatic moieties of 4-quinolinecarboxylates 7a, d-f, and h-k or 4-quinolinecarboxamides 7b, c, and g were modified into those of 2-quinolinecarboxamides 9a-e. Very interestingly, this structure-affinity relationship study led to the discovery of 7h-j as novel 5-HT4R ligands showing K i values in the subnanomolar range. The structures of all these compounds contain the N-butyl-4-piperidinylmethyl substituent, which appear to behave as an optimized basic moiety in the interaction of these 4-quinolinecarboxylates with the 5-HT4R binding site. However, this basic moiety was ineffective in providing 5-HT4R affinity in the corresponding 4-quinolinecarboxamide 7g, but it did in 2-quinolinecarboxamide ligands 9c-e. Thus, a subtle interrelationship of several structural parameters appeared to play a major role in the interaction of the ligands with the 5-HT4R binding site. They include the kind of basic moiety, the position of the carbonyl linking group with respect to the aromatic moiety and its orientation, which could be affected by the presence of the intramolecular H-bond as in compounds 9c-e.
RESUMEN
Spontaneous polymerization is an intriguing phenomenon in which pure monomers begin their polymerization without initiators or catalysts. Previously, 3-phenylbenzofulvene monomers were found to polymerize spontaneously after solvent removal. Here, eight new 3-substituted benzofulvene monomers 1aâ»h were synthesized in order to investigate the effects of differently substituted aromatic rings in position 3 of the benzofulvene scaffold on spontaneous polymerization. The newly synthesized monomers maintained the tendency toward spontaneous polymerization. However, monomer 1a, bearing an ortho-methoxy substituted phenyl, polymerized hardly, thus producing low polymerization yields, inhomogeneous structure, and low molecular weight of the obtained polymeric material. This result suggested the importance of the presence of hydrogen atoms in the 2'-position to achieve productive interactions among the monomers in the recognition step preluding the spontaneous polymerization and among the monomeric units in the polybenzofulvene backbones. Moreover, this study paves the way to modify the pendant rings in position 3 of the indene scaffold to synthesize new polybenzofulvene derivatives variously decorated.
RESUMEN
In order to develop a technology platform based on two natural compounds from biorenewable resources, a short series of hyaluronan (HA) copolymers grafted with propargylated ferulic acid (HA-FA-Pg) were designed and synthesized to show different grafting degree values and their optical properties were characterized in comparison with reference compounds containing the same ferulate fluorophore. Interestingly, these studies revealed that the ferulate fluorophore was quite sensitive to the restriction of intramolecular motion and its introduction into the rigid HA backbone, as in HA-FA-Pg graft copolymers, led to higher photoluminescence quantum yield values than those obtained with the isolated fluorophore. Thus, the propargyl groups of HA-FA-Pg derivatives were exploited in the coupling with oleic acid through a biocompatible nona(ethylene glycol) spacer as an example of the possible applications of this technology platform. The resulting HA-FA-NEG-OA materials showed self-assembling capabilities in aqueous environment. Furthermore, HA-FA-NEG-OA derivatives have been shown to interact with phospholipid bilayers both in liposomes and living cells, retaining their fluorogenic properties and showing a high degree of cytocompatibility and for this reason they were proposed as potential biocompatible self-assembled aggregates forming new materials for biomedical applications.
RESUMEN
This paper reports a simple and economical method for the fabrication of nanopatterned optical fiber nanotips. The proposed patterning approach relies on the use of the nanosphere lithography of the optical fiber end facet. Polystyrene (PS) nanospheres are initially self-assembled in a hexagonal array on the surface of water. The created pattern is then transferred onto an optical fiber tip (OFT). The PS monolayer colloidal crystal on the OFT is the basic building block that is used to obtain different periodic structures by applying further treatment to the fiber, such as metal coating, nanosphere size reduction and sphere removal. Ordered dielectric and metallo-dielectric sphere arrays, metallic nanoisland arrays and hole-patterned metallic films with feature sizes down to the submicron scale are achievable using this approach. Furthermore, the sizes and shapes of these periodic structures can be tailored by altering the fabrication conditions. The results indicate that the proposed self-assembly approach is a valuable route for the development of highly repeatable metallo-dielectric periodic patterns on OFTs with a high degree of order and low fabrication cost. The method can be easily extended to simultaneously produce multiple fibers, opening a new route to the development of fiber-optic nanoprobes. Finally, we demonstrate the effective application of the patterned OFTs as surface-enhanced Raman spectroscopy nanoprobes.
RESUMEN
A series of imidazo[1,5-a]quinoline derivatives was designed and synthesized as central benzodiazepine receptor (CBR) ligands. Most of the compounds showed high CBR affinity with Ki values within the submicromolar and subnanomolar ranges with interesting modulations in their structure-affinity relationships. In particular, fluoroderivative 7w (Ki = 0.44 nM) resulted in the most potent ligand among the imidazo[1,5-a]quinoline derivatives described so far. Overall, these observations confirmed the assumption concerning the presence of a large though apparently saturable lipophilic pocket in the CBR binding site region interacting with positions 4 and 5 of the imidazo[1,5-a]quinoline nucleus. The in vivo biological characterization revealed that compounds 7a,c,d,l,m,q,r,w show anxiolytic and antiamnestic activities without the unpleasant myorelaxant side effects of the classical 1,4-BDZ. Furthermore, the effect of 7l,q,r, and 8i in lowering lactate dehydrogenase (LDH) release induced by ischemia-like conditions in rat brain slices suggested neuroprotective properties for these imidazo[1,5-a]quinoline derivatives.
Asunto(s)
Ansiolíticos/farmacología , Benzodiazepinas/química , Diseño de Fármacos , Fármacos Neuroprotectores/farmacología , Quinolinas/química , Quinolinas/farmacología , Receptores de GABA-A/metabolismo , Amnesia/tratamiento farmacológico , Amnesia/metabolismo , Animales , Ansiolíticos/química , Conducta Animal/efectos de los fármacos , Sitios de Unión , Encéfalo/efectos de los fármacos , Encéfalo/metabolismo , Bovinos , Humanos , Isquemia/tratamiento farmacológico , Isquemia/metabolismo , Isquemia/patología , Ligandos , Masculino , Ratones , Modelos Moleculares , Fármacos Neuroprotectores/química , Ensayo de Unión Radioligante , Ratas , Ratas Sprague-Dawley , Relación Estructura-Actividad , Sinaptosomas/efectos de los fármacos , Sinaptosomas/metabolismoRESUMEN
In order to obtain new advanced functional materials capable of recognizing drug molecules, the polybenzofulvene backbone of molecular brush poly-6-MOEG-9-TM-BF3k has been functionalized with a "synthetic dynamic receptor" composed of two 1-adamantylurea moieties linked together by means of a dipropyleneamino bridge as in Meijer's bis(adamantylurea) pincer (BAUP). This functional material, bearing synthetic receptors potentially capable of recognizing/loading and then delivering drug molecules, was used to prepare colloidal drug delivery systems (by means of soft interaction with BAUP) for delivering the model anti-cancer drug doxorubicin (DOXO). The resulting nanostructured drug delivery systems containing the physically loaded drug were characterized in terms of drug loading and release, dimensions and zeta potential, and in vitro cell activity and uptake on two different cell lines (i.e. the human bronchial epithelial 16HBE and the human colon cancer HCT116). On normal cells, free DOXO was found to be more cytotoxic than DOXO-loaded nanogels at the higher tested concentration and, only on cancer cells, DOXO-loaded nanogels show similar or slightly higher cytotoxicity values than free DOXO, suggesting potential advantages in the treatment of cancer. These results were supported by fluorescence microscopy studies, which suggested that DOXO-loaded nanogels provide an extracellular reservoir of the drug, which is gradually released and internalized within the cells.
RESUMEN
HAFA macromolecules were designed as graft copolymers combining ferulic acid (FA) structure and the hyaluronic acid (HA) backbone linked through an ester bond. These materials were prepared by feruloylation of HA with bisimidazolide 3 [i.e. (E)-4-(3-(1H-imidazol-1-yl)-3-oxoprop-1-enyl)-2-methoxyphenyl 1H-imidazole-1-carboxylate] and obtained with different grafting degree (GD) values, which could be tuned by applying suitable reaction conditions. Among the numerous applications envisioned for HAFA graft copolymers on the basis of the physico-chemical, biological, and pharmacological properties of the starting natural products and the grafting-derived features such as physical cross-linking, potential wound healing properties have been evaluated in vitro and in vivo in preclinical models. In human keratinocyte (HaCaT) cells, our data showed the ability of HAFA-17 (GD = 7%) to ameliorate the in vitro scratch wound significantly with respect to the control HA and FA alone, and this effect was associated with the ability of HAFA-17 to also induce keratinocyte proliferation as determined by BrdU assay. In addition, experiments on wound healing in SKH1 mice confirmed the ability of HAFA-17 to improve the wound closure rate also in vivo. Overall, the data presented herein suggest HAFA-17 as a possible future drug for the therapeutic treatment of acute and chronic wounds.
RESUMEN
Correction for 'Wound healing properties of hyaluronan derivatives bearing ferulate residues' by Giuseppe Valacchi et al., J. Mater. Chem. B, 2015, DOI: .
RESUMEN
Two novel benzofulvene monomers bearing propargyl or allyl groups have been synthesized by means of readily accessible reactions, and were found to polymerize spontaneously by solvent removal, in the apparent absence of catalysts or initiators, to give the corresponding polybenzofulvene derivatives bearing clickable propargyl or allyl moieties. The clickable propargyl and allyl groups were exploited in appropriate click reactions to develop a powerful and versatile "grafting onto" synthetic methodology for obtaining tailored polymer brushes.