RESUMEN
Film bulk acoustic-wave resonators (FBARs) are widely utilized in the field of radio frequency (RF) filters due to their excellent performance, such as high operation frequency and high quality. In this paper, we present the design, fabrication, and characterization of an FBAR filter for the 3.0 GHz-3.2 GHz S-band. Using a scandium-doped aluminum nitride (Sc0.2Al0.8N) film, the filter is designed through a combined acoustic-electromagnetic simulation method, and the FBAR and filter are fabricated using an eight-step lithographic process. The measured FBAR presents an effective electromechanical coupling coefficient (keff2) value up to 13.3%, and the measured filter demonstrates a -3 dB bandwidth of 115 MHz (from 3.013 GHz to 3.128 GHz), a low insertion loss of -2.4 dB, and good out-of-band rejection of -30 dB. The measured 1 dB compression point of the fabricated filter is 30.5 dBm, and the first series resonator burns out first as the input power increases. This work paves the way for research on high-power RF filters in mobile communication.
RESUMEN
Piezoelectric aluminum nitride (AlN) thin film, as a commonly used material for high-frequency acoustic resonators, has been a research hotspot in the RF field. Doping Sc elements in AlN is one of most effective methods to improve the piezoelectricity of the material. In this work, the first principal calculation and Mori-Tanaka model are used to obtain the piezoelectric constants of AlN, ScAlN, and AlN/ScAlN composites. Then, five types of AlN/ScAlN thin films are prepared on 8 inch silicon substrates. The crystal quality, roughness, and stress distribution are measured to characterize the film quality. The results show that composite film can effectively solve the problem of abnormal grains and reduce the roughness. Finally, a lamb wave resonator with an AlN/Sc0.2Al0.8N composite working at 2.33 GHz is fabricated. The effective electromechanical coupling coefficient Keff2 is calculated to be 6.19%, which has the potential to design high-frequency broadband filters.
RESUMEN
The arrival of the 5G era has promoted the need for filters of different bandwidths. Thin-film bulk acoustic resonators have become the mainstream product for applications due to their excellent performance. The Keff2 of the FBAR greatly influences the bandwidth of the filter. In this paper, we designed an AlN-based adjustable Keff2 FBAR by designing parallel capacitors around the active area of the resonator. The parallel capacitance is introduced through the support column structure, which is compatible with conventional FBAR processes. The effects of different support column widths on Keff2 were verified by finite element simulation and experimental fabrication. The measured results show that the designed FBAR with support columns can achieve a Keff2 value that is 25.9% adjustable.
RESUMEN
This paper investigates the issue of reentry attitude control for reusable launch vehicles with overload constraint, and proposes a performance improvement-oriented control scheme. Incorporating the overload constraint into the performance functions, the presented control law proves to guarantee the overload limitation not violating throughout the reentry phase. Compared with traditional performance-guaranteed methods, the presented control introduces a special performance function to achieve better transient performance. Moreover, the attitude control model is reduced to a first-order system with disturbances, leading to a significant reduction of the sophisticated structure by the standard backstepping based approaches. The implementation of the control scheme in the practical engineering is also discussed including the control moment allocation. Simulation results verify the effectiveness of the proposed control approach.