Supported Imidazolium-Based Ionic Liquids on a Polysulfone Matrix for Enhanced CO2 Capture.

The present work demonstrates the potential for improved CO2 capture capabilities of ionic liquids (ILs) by supporting them on a polysulfone polymeric matrix. CO2 is one of the main gases responsible for the greenhouse effect and is a focus of The European Commission, which committed to diminishing its emission to 55% by 2023. Various ILs based on combinations of 1-butyl-3-methyl- imidazolium cations and different anions (BMI·X) were synthesized and supported on a polysulfone porous membrane. The influence of the membrane structure and the nature of ILs on the CO2 capture abilities were investigated. It was found that the membrane's internal morphology and its surface characteristics influence its ILs sorption capacity and CO2 solubility. In most of the studied configurations, supporting ILs on porous structures increased their contact surface and gas adsorption compared to the bulk ILs. The phenomenon was strongly pronounced in the case of ILs of high viscosity, where supporting them on porous structures resulted in a CO2 solubility value increase of 10×. Finally, the highest CO2 solubility value (0.24 molCO2/molIL) was obtained with membranes bearing supported ILs containing dicarboxylate anion (BMI.MAL).

Synergism between iron porphyrin and dicationic ionic liquids: tandem CO2 electroreduction-carbonylation reactions.

Here, we report a simple procedure that drastically reduces the electrochemical E(FeI/Fe0) and E0cat of the commercially available iron(III) tetraphenylporphyrin chloride (FeIIITPP·Cl) catalyst via a synergetic effect with the imidazolium dications of the ionic liquid electrolyte. This procedure enhanced the performance of catalytic systems in the electrochemical production of CO and enabled us to perform different tandem CO2 reduction-carbonylation reactions under mild conditions.

Reverse Semi-Combustion Driven by Titanium Dioxide-Ionic Liquid Hybrid Photocatalyst.

Unprecedented metal-free photocatalytic CO2 conversion to CO (up to 228±48 µmol g-1 h-1) was displayed by TiO2@IL hybrid photocatalysts prepared by simple impregnation of commercially available P25-titanium dioxide with imidazolium-based ionic liquids (ILs). The high activity of TiO2@IL hybrid photocatalysts was mainly associated to (i) TiO2@IL red shift compared to the pure TiO2 absorption, and thus a modification of the TiO2 surface electronic structure; (ii) TiO2 with IL bearing imidazolate anions lowered the CO2 activation energy barrier. The reaction mechanism was postulated to occur via CO2 photoreduction to formate species by the imidazole/imidazole radical redox pair, yielding CO and water.

Tunneling effects in confined gold nanoparticle hydrogenation catalysts.

Clean surface gold nanoparticles (AuNPs) of ∼6.6 nm that were confined in ionic liquid (IL) cages of hybrid γ-alumina (γ-Al2O3) displayed hydrogenation pathways in the reduction of trans-cinnamaldehyde distinct from those imprinted directly onto γ-Al2O3. Hydrogen activation proceeded via homolytic activation in IL-encapsulated AuNPs and via heterolytic cleavage for IL-free supported AuNPs. Higher negative apparent entropy (ΔSapp) values were obtained for the IL-confined AuNPs compared to the non-hybrid catalyst (Au/γ-Al2O3), suggesting a decrease in the number of microstates induced by the nano-confined environment. High kinetic isotope effect (KIE) values (kH/kD = 2.5-2.9 at 273 K) and Arrhenius convex curves were observed. Furthermore, differences of 5.6 and 6.2 kJ mol-1 between the apparent activation energies of the deuteration and hydrogenation reactions (E-E) associated with pre-exponential factor ratios (AD/AH) of 4.6 and 5.1 provided strong evidence of the possible involvement of a tunneling pathway in the case of the confined AuNPs.

A General One-Pot Methodology for the Preparation of Mono- and Bimetallic Nanoparticles Supported on Carbon Nanotubes: Application in the Semi-hydrogenation of Alkynes and Acetylene.

A facile and straightforward methodology for the preparation of monometallic (copper and palladium) and bimetallic nanocatalysts (NiCu and PdCu) stabilized by a N-heterocyclic carbene ligand is reported. Both colloidal and supported nanoparticles (NPs) on carbon nanotubes (CNTs) were prepared in a one-pot synthesis with outstanding control on their size, morphology and composition. These catalysts were evaluated in the selective hydrogenation of alkynes and alkynols. PdCu/CNTs revealed an efficient catalytic system providing high selectivity in the hydrogenation of terminal and internal alkynes. Moreover, this catalyst was tested in the semi-hydrogenation of acetylene in industrially relevant acetylene/ethylene-rich model gas feeds and showed excellent stability even after 40 h of reaction.

Facile synthesis of NHC-stabilized Ni nanoparticles and their catalytic application in the Z-selective hydrogenation of alkynes.

Well defined Ni nanoparticles (NiNPs) stabilized with N-heterocyclic carbenes (NHCs) have been synthesized through a new methodology involving the decarboxylation of a zwitterionic CO2 adduct. Their catalytic performance was tested in the partial hydrogenation of alkynes into (Z)-alkenes under very mild reaction conditions (50 °C and 5 bar H2 pressure), providing excellent activities and selectivities.

Carbon Dioxide Transformation in Imidazolium Salts: Hydroaminomethylation Catalyzed by Ru-Complexes.

The catalytic species generated by dissolving Ru3 (CO)12 in the ionic liquids 1-n-butyl-3-methyl-imidazolium chloride or 1-n-butyl-2,3-dimethyl-imidazolium chloride are efficient multifunctional catalysts for: (a) reverse water-gas shift, (b) hydroformylation of alkenes, and (c) reductive amination of aldehydes. Thus the reaction of alkenes with primary or secondary amines (alkene/amine, 1:1) under CO2 /H2 (1:1) affords the hydroaminomethylations products in high alkene conversions (up to 99 %) and selectivities (up to 96 %). The reaction proceeds under relatively mild reaction conditions (120 °C, 60 bar=6 MPa) and affords selectively secondary and tertiary amines. The presence of amine strongly reduces the alkene hydrogenation competitive pathway usually observed in the hydroformylation of terminal alkenes by Ru complexes. The catalytic system is also highly active for the reductive amination of aldehydes and ketones yielding amines in high yields (>90 %).

Sputtering-deposition of Ru nanoparticles onto Al2O3 modified with imidazolium ionic liquids: synthesis, characterisation and catalysis.

Well-distributed Ru nanoparticles (Ru-NPs) were produced over Al(2)O(3) supports modified with covalently anchored imidazolium ionic liquids (ILs) containing different anions and cation lateral alkyl chain lengths by simple sputtering from a Ru foil. These Ru-NPs were active catalysts for the hydrogenation of benzene. Furthermore, depending on the nature of the IL used to modify the support (hydrophilic or hydrophobic), different catalytic behaviours were observed. Turnover numbers (TON) as high as 27 000 with a turnover frequency (TOF) of 2.73 s(-1) were achieved with Ru-NPs of 6.4 nm supported in Al(2)O(3) modified with an IL containing the N(SO(2)CF(3))2(-) anion, whereas higher initial cyclohexene selectivities (ca. 20% at 1% benzene conversion) were attained for Ru-NPs of 6.6 nm in the case where Cl(-) and BF(4)(-) anions were used. Such observations strongly suggest that thin layers of ILs surround the NP surface, modifying the reactivity of these catalytic systems. These findings open a new window of opportunity in the development of size-controlled Ru-NPs with tuneable reactivity.

Hydrophobic effects on supported ionic liquid phase Pd nanoparticle hydrogenation catalysts.

Hybrid organosilicas prepared by sol-gel processes using 1-n-butyl-3-(3-trimethoxysilylpropyl)-imidazolium cations associated with hydrophilic and hydrophobic anions can be easily decorated with well dispersed and similar size (1.8-2.1 nm) Pd nanoparticles (Pd-NPs) by simple sputtering-deposition. Higher Pd concentration at the surface compared to the deeper region is obtained in the supports with smaller pore diameter (containing hydrophobic ILs) than in supports with the largest pore diameter (containing hydrophilic ILs). The IL hydrophobicity plays a central role in the hydrogenation of dienes by controlling the diene access to NP surface active sites.

Straightforward synthesis of bimetallic Co/Pt nanoparticles in ionic liquid: atomic rearrangement driven by reduction-sulfidation processes and Fischer-Tropsch catalysis.

Unsupported bimetallic Co/Pt nanoparticles (NPs) of 4.4 ± 1.9 nm can be easily obtained by a simple reaction of [bis(cylopentadienyl)cobalt(ii)] and [tris(dibenzylideneacetone) bisplatinum(0)] complexes in 1-n-butyl-3-methylimidazolium hexafluorophosphate IL at 150 °C under hydrogen (10 bar) for 24 h. These bimetallic NPs display core-shell like structures in which mainly Pt composes the external shell and its concentration decreases in the inner-shells (CoPt3@Pt-like structure). XPS and EXAFS analyses show the restructuration of the metal composition at the NP surface when they are subjected to hydrogen and posterior H2S sulfidation, thus inducing the migration of Co atoms to the external shells of the bimetallic NPs. Furthermore, the isolated bimetallic NPs are active catalysts for the Fischer-Tropsch synthesis, with selectivity for naphtha products.

Interplay between cationic and neutral species in the rhodium-catalyzed hydroaminomethylation reaction.

The reactivity of [Rh(CO)(2){(R,R)-Ph-BPE}]BF(4) (2) toward amine, CO and/or H(2) was examined by high-pressure NMR and IR spectroscopy. The two cationic pentacoordinated species [Rh(CO)(3) {(R,R)-Ph-BPE}]BF(4) (4) and [Rh(CO)(2)(NHC(5)H(10)){(R,R)-Ph-BPE}]BF(4) (8) were identified. The transformation of 2 into the neutral complex [RhH(CO)(2){(R,R)-Ph-BPE}] (3) under hydroaminomethylation conditions (CO/H(2), amine) was investigated. The full mechanisms related to the formation of 3, 4 and 8 starting from 2 are supported by DFT calculations. In particular, the pathway from 2 to 3 revealed the deprotonation by the amine of the dihydride species [Rh(H)(2)(CO)(2){(R,R)-Ph-BPE}]BF(4) (6), resulting from the oxidative addition of H(2) on 2.

Interception of a Rh(I)-Rh(III) dinuclear trihydride complex revealing the dihydrogen activation by [Rh(CO)2{(R,R)-Ph-BPE}].

Reaction of [Rh(CO)(2){(R,R)-Ph-BPE}][BF(4)] 1 under 7 bar H(2) provides the dihydride [Rh(H)(2)(CO)(2){(R,R)-Ph-BPE}][BF(4)] 3, which reacts with the neutral hydride [Rh(H)(CO){(R,R)-Ph-BPE}] 2 arising from 3 in THF. The resulting complex is the dimeric monocationic Rh((I))-Rh((III)) complex [Rh(H)(2)(CO)(2){(R,R)-Ph-BPE}][BF(4)] 4.

C1-symmetric carbohydrate diphosphite ligands for asymmetric Pd-allylic alkylation reactions. Study of the key Pd-allyl intermediates.

A series of C(1)-symmetrical 1,3-diphosphite ligands with a furanoside backbone have been applied in the Pd-catalysed asymmetric allylic alkylation of mono- and disubstituted linear substrates. These diphosphite ligands were designed by selective modification of the successful diphosphite ligand L1a with the 6-deoxy-1,2-O-isopropylidene-glucofuranose backbone in order to study the effect of the ligand structure on the catalytic performance. The effect of the solvent, the substrate/metal ratio and ligand/metal ratio were also investigated. The results in the Pd-allylic alkylation of rac-1,3-diphenyl-3-acetoxyprop-1-ene showed that the ligand structure and the reaction conditions had a considerable effect on enantioselectivity and on the kinetics of the reaction producing the kinetic resolution of the substrate. The alkylated product 2 was therefore obtained in 95% ee at 53% conversion and the enantiopure substrate 1 was recovered in 99.9% ee. Furthermore, the effect of the ligand structure and solvent were also observed in the Pd-allylic alkylation of monosubstituted 1-phenyl-3-acetoxyprop-1-ene. The use of a pro-chiral nucleophile was also explored in this reaction leading to excellent regioselectivities but moderate enantioselectivities. Finally, in order to determine how the ligand structure affected the chiral pocket of the Pd-π-allyl intermediates, the complexes [Pd(η(3)-C(15)H(13))(L)]PF(6), where L = L1a, L5-L8a, were synthesised and characterised by NMR spectroscopy.

Soluble transition-metal nanoparticles-catalysed hydrogenation of arenes.

Over the last decade, the hydrogenation of arenes catalysed by soluble nanoparticles has attracted much interest from both academic and industrial research groups due to the milder conditions and the interesting selectivities achieved when compared to those obtained with classical heterogeneous catalysts. When substituted arenes are used as substrates in this reaction, the stereoselectivity is a key objective, and high levels of enantioselectivity are yet to be achieved.

Carbohydrate-derived 1,3-diphosphite ligands as chiral nanoparticle stabilizers: promising catalytic systems for asymmetric hydrogenation.

Metallic Ru, Rh, and Ir nanoparticles were prepared by the decomposition of organometallic precursors under H(2) pressure in the presence of 1,3-diphosphite ligands, derived from carbohydrates, as stabilizing agents. Structural modifications to the diphosphite backbone were found to influence the nanoparticles' size, dispersion, and catalytic activity. In the hydrogenation of o- and m-methylanisole, the Rh nanoparticles showed higher catalytic activity than the corresponding Ru nanoparticles. The Ir nanoparticles presented the lowest catalytic activity of the series. In all cases, the hydrogenation of o-methylanisole gave total selectivity for the cis-product, however, the ee of the product was always less than 6 %. A maximum of 81 % cis-selectivity was obtained for the hydrogenation of m-methylanisole, however, no asymmetric induction was observed. These results show that the catalytic activity is affected by a combination of influences from the substrate, the diphosphite ligands, and the metallic nanoparticles.

Diphosphite ligands derived from carbohydrates as stabilizers for ruthenium nanoparticles: promising catalytic systems in arene hydrogenation.

Ruthenium nanoparticles (RuNPs) were prepared through the hydrogenation of [Ru(COD)(COT)] (COD = 1,5-cyclooctadiene, COT = 1,3,5-cyclooctatriene) in the presence of diphosphites derived from carbohydrates as stabilizing agents, and interestingly, structural modifications of the diphosphite backbone were found to influence nanoparticle size and dispersity, as well as their catalytic activity in arene hydrogenation.