Platelet Biorheology and Mechanobiology in Thrombosis and Hemostasis: Perspectives from Multiscale Computation.

Thrombosis is the pathological clot formation under abnormal hemodynamic conditions, which can result in vascular obstruction, causing ischemic strokes and myocardial infarction. Thrombus growth under moderate to low shear (<1000 s-1) relies on platelet activation and coagulation. Thrombosis at elevated high shear rates (>10,000 s-1) is predominantly driven by unactivated platelet binding and aggregating mediated by von Willebrand factor (VWF), while platelet activation and coagulation are secondary in supporting and reinforcing the thrombus. Given the molecular and cellular level information it can access, multiscale computational modeling informed by biology can provide new pathophysiological mechanisms that are otherwise not accessible experimentally, holding promise for novel first-principle-based therapeutics. In this review, we summarize the key aspects of platelet biorheology and mechanobiology, focusing on the molecular and cellular scale events and how they build up to thrombosis through platelet adhesion and aggregation in the presence or absence of platelet activation. In particular, we highlight recent advancements in multiscale modeling of platelet biorheology and mechanobiology and how they can lead to the better prediction and quantification of thrombus formation, exemplifying the exciting paradigm of digital medicine.

Cell-Specific Impacts of Surface Coating Composition on Extracellular Vesicle Secretion.

Biomaterial properties have recently been shown to modulate extracellular vesicle (EV) secretion and cargo; however, the effects of substrate composition on EV production remain underexplored. This study investigates the impacts of surface coatings composed of collagen I (COLI), fibronectin (FN), and poly l-lysine (PLL) on EV secretion for applications in therapeutic EV production and to further understanding of how changes in the extracellular matrix microenvironment affect EVs. EV secretion from primary bone marrow-derived mesenchymal stromal cells (BMSCs), primary adipose-derived stem cells (ASCs), HEK293 cells, NIH3T3 cells, and RAW264.7 cells was characterized on the different coatings. Expression of EV biogenesis genes and cellular adhesion genes was also analyzed. COLI coatings significantly decreased EV secretion in RAW264.7 cells, with associated decreases in cell viability and changes in EV biogenesis-related and cell adhesion genes at day 4. FN coatings increased EV secretion in NIH3T3 cells, while PLL coatings increased EV secretion in ASCs. Surface coatings had significant effects on the capacity of EVs derived from RAW264.7 and NIH3T3 cells to impact in vitro macrophage proliferation. Overall, surface coatings had different cell-specific effects on EV secretion and in vitro functional capacity, thus highlighting the potential of substrate coatings to further the development of clinical EV production systems.

Osmotically Rupturing Phagosomes in Macrophages Using PNIPAM Microparticles.

The rupture of macrophage phagosomes has been implicated in various human diseases and plays a critical role in immunity. However, the mechanisms underlying this process are complex and not yet fully understood. This study describes the development of a robust engineering method for rupturing phagosomes based on a well-defined mechanism. The method utilizes microfabricated microparticles composed of uncrosslinked linear poly(N-isopropylacrylamide) (PNIPAM) as phagocytic objects. These microparticles are internalized into phagosomes at 37 °C. By exposing the cells to a cold shock at 0 °C, the vast majority of the microparticle-containing phagosomes rupture. The percentage of phagosomal rupture decreases with the increase of the cold-shock temperature. The osmotic pressure in the phagosomes and the tension in the phagosomal membrane are calculated using the Flory-Huggins theory and the Young-Laplace equation. The modeling results indicate that the osmotic pressure generated by dissolved microparticles is probably responsible for phagosomal rupture, are consistent with the experimentally observed dependence of phagosomal rupture on the cold-shock temperature, and suggest the existence of a cellular mechanism for resisting phagosomal rupture. Moreover, the effects of various factors including hypotonic shock, chloroquine, tetrandrine, colchicine, and l-leucyl-l-leucine O-methyl ester (LLOMe) on phagosomal rupture have been studied with this method. The results further support that the osmotic pressure generated by the dissolved microparticles causes phagosomal rupture and demonstrated usefulness of this method for studying phagosomal rupture. This method can be further developed, ultimately leading to a deeper understanding of phagosomal rupture.

Engineering Human Mesenchymal Bodies in a Novel 3D-Printed Microchannel Bioreactor for Extracellular Vesicle Biogenesis.

Human Mesenchymal Stem Cells (hMSCs) and their derived products hold potential in tissue engineering and as therapeutics in a wide range of diseases. hMSCs possess the ability to aggregate into "spheroids", which has been used as a preconditioning technique to enhance their therapeutic potential by upregulating stemness, immunomodulatory capacity, and anti-inflammatory and pro-angiogenic secretome. Few studies have investigated the impact on hMSC aggregate properties stemming from dynamic and static aggregation techniques. hMSCs' main mechanistic mode of action occur through their secretome, including extracellular vesicles (EVs)/exosomes, which contain therapeutically relevant proteins and nucleic acids. In this study, a 3D printed microchannel bioreactor was developed to dynamically form hMSC spheroids and promote hMSC condensation. In particular, the manner in which dynamic microenvironment conditions alter hMSC properties and EV biogenesis in relation to static cultures was assessed. Dynamic aggregation was found to promote autophagy activity, alter metabolism toward glycolysis, and promote exosome/EV production. This study advances our knowledge on a commonly used preconditioning technique that could be beneficial in wound healing, tissue regeneration, and autoimmune disorders.

Specific labelling of phagosome-derived vesicles in macrophages with a membrane dye delivered with microfabricated microparticles.

Phagocytosis performed by a macrophage involves complex membrane trafficking and reorganization among various membranous cellular structures including phagosomes and vesicles derived from the phagosomes known as phagosome-derived vesicles. The present work reports on development of a technique that allows to specifically label the phagosome-derived vesicles in macrophages with a membrane dye. The technique is based on the use of microfabricated microparticles that are made of a thermosensitive nonbiodegradable polymer poly(N-isopropylacrylamide) (PNIPAM) or its derivative and contain a membrane dye 1,1'-dialkyl-3,3,3',3'-tetramethylindodicarbocyanine (DiI). The microparticles can be phagocytosed by RAW264.7 macrophages into their phagosomes, resulting in formation of intracellular DiI-positive vesicles derived from the phagosomes. The DiI-positive vesicles are motile and acidic; can be stained by fluorescently labelled dextran added in the culture medium; and can accumulate around new phagosomes, indicating that they possess properties of lysosomes. This technique is also applicable to another membrane dye 3,3'-dioctadecyloxacarbocyanine (DiO) and holds great potential to be useful for advancing our understanding of phagocytosis. STATEMENT OF SIGNIFICANCE: Phagocytosis performed by macrophages is a cellular process of great importance to various applications of biomaterials such as drug delivery and medical implantation. This work reports on a technique for characterizing phagocytosis based on the use of poly(N-isopropylacrylamide), which is a major biomaterial with numerous applications. This technique is the first of its kind and has generated an original finding about phagocytosis. In addition to drug delivery and medical implantation, phagocytosis plays critical roles in diseases, injuries and vaccination. This work could thus attract immediate and widespread interests in the field of biomaterials science and engineering.

DNA Nanomachines for Identifying Cancer Biomarkers in Body Fluids and Cells.

Identifying molecular biomarkers promises to significantly improve the accuracy in cancer diagnosis at its early stage. DNA nanomachines, which are designable and switchable nanostructures made of DNA, show broad potential to detect tumor biomarkers with noninvasive, inexpensive, highly sensitive, and highly specific advantages. This Feature summarizes the recent DNA nanomachine-based platforms for the early detection of cancer biomarkers, both from body fluids and in cells.

Controlled Fabrication of DNA Molecular Templates for In Situ Formation and Measurement of Ultrathin Metal Nanostructures.

Fabrication of ultrathin metal nanostructures usually requires some combination of high-vacuum deposition and postgrowth processing, which precludes access to nanostructures of ultrasmall cross sections for most materials. DNA nanowires (NWs) are versatile insulating templates with intrinsic sub-10 nm line width. Here, we demonstrate a method of DNA template fabrication with precise control over the location and orientation of the DNA NWs. We further demonstrate that this template can be used to support formation of ultrathin metal NWs for derivative nanodevices: a metal is incrementally deposited, and electrical transport measurement is performed in situ at each step. The results show a homogeneous metal NW is obtained at a thickness as small as 0.9 nm with a cross-section of only a few nm2. The high degree of control in the location, separation, and orientation of the DNA NWs affords this method great promise in fabricating complex nanodevices based on metal NWs.

Conjugating Micropatches to Living Cells Through Membrane Intercalation.

Existing clinical cell therapies, which rely on the use of biological functionalities of living cells, can be further enhanced by conjugating functional particles to the cells to form cell-particle complexes. Disk-shaped microparticles produced by the top-down microfabrication approach possess unique advantages for this application. However, none of the current mechanisms for conjugating the microfabricated microparticles to the cells are principally applicable to all types of cells with therapeutic potentials. On the other hand, membrane intercalation is a well-established mechanism for attaching fluorescent molecules to living cells or for immobilizing cells on a solid surface. This paper reports a study on conjugating disk-shaped microparticles, referred to as micropatches, to living cells through membrane intercalation for the first time. The procedure for producing the cell-micropatch complexes features an unprecedented integration of microcontact printing of micropatches, end-grafting of linear molecules of octadecyl chain and poly(ethylene glycol) to the printed micropatches, and use of gelatin as a temperature-sensitive sacrificial layer to allow the formation and subsequent release of the cell-micropatch complexes. Complexes composed of mouse neuroblastoma cells were found to be stable in vitro, and the micropatch-bound cells were viable, proliferative, and differentiable. Moreover, complexes composed of four other types of cells were produced. The membrane-intercalation mechanism and the corresponding fabrication technique developed in this study are potentially applicable to a wide range of therapeutic cells and thus promise to be useful for developing new cell therapies enhanced by the disk-shaped microparticles.

Microcontact Printing with Laser Direct Writing Carbonization for Facile Fabrication of Carbon-Based Ultrathin Disk Arrays and Ordered Holey Films.

A nanometer-thick carbon film with a highly ordered pattern structure is very useful in a variety of applications. However, its large-scale, high-throughput, and low-cost fabrication is still a great challenge. Herein, microcontact printing (µCP) and direct laser writing carbonization (DLWc) are combined to develop a novel method that enables ease of fabrication of nanometer-thick and regularly patterned carbon disk arrays (CDAs) and holey carbon films (HCFs) from a pyromellitic dianhydride-oxydianiline-based polyamic acid (PAA) solution. The effect of PAA concentration and pillar lattice structure of the polydimethyl siloxane stamp are systematically studied for their influence on the geometrical parameter, surface morphology, and chemical structure of the finally achieved CDAs and HCFs. Within the PAA concentration being investigated, the averaged thickness of CDAs and HCFs can be tailored in a range from a few tens to a few hundred of nanometers. The µCP+DLWc-enabled electrically conductive CDAs and HCFs possess the characteristics of ease-of-fabrication, nanometer-thickness, highly regular and controlled patterns and structures, and the ability to form on both hard and soft substrates, which imparts usefulness in electronics, photonics, energy storage, catalysis, tissue engineering, as well as physical, chemical, and bio-sensing applications.

Functionalization of Brain Region-specific Spheroids with Isogenic Microglia-like Cells.

Current brain spheroids or organoids derived from human induced pluripotent stem cells (hiPSCs) still lack a microglia component, the resident immune cells in the brain. The objective of this study is to engineer brain region-specific organoids from hiPSCs incorporated with isogenic microglia-like cells in order to enhance immune function. In this study, microglia-like cells were derived from hiPSCs using a simplified protocol with stage-wise growth factor induction, which expressed several phenotypic markers, including CD11b, IBA-1, CX3CR1, and P2RY12, and phagocytosed micron-size super-paramagnetic iron oxides. The derived cells were able to upregulate pro-inflammatory gene (TNF-α) and secrete anti-inflammatory cytokines (i.e., VEGF, TGF-ß1, and PGE2) when stimulated with amyloid ß42 oligomers, lipopolysaccharides, or dexamethasone. The derived isogenic dorsal cortical (higher expression of TBR1 and PAX6) and ventral (higher expression of NKX2.1 and PROX1) spheroids/organoids displayed action potentials and synaptic activities. Co-culturing the microglia-like cells (MG) with the dorsal (D) or ventral (V) organoids showed differential migration ability, intracellular Ca2+ signaling, and the response to pro-inflammatory stimuli (V-MG group had higher TNF-α and TREM2 expression). Transcriptome analysis exhibited 37 microglia-related genes that were differentially expressed in MG and D-MG groups. In addition, the hybrid D-MG spheroids exhibited higher levels of immunoreceptor genes in activating members, but the MG group contained higher levels for most of genes in inhibitory members (except SIGLEC5 and CD200). This study should advance our understanding of the microglia function in brain-like tissue and establish a transformative approach to modulate cellular microenvironment toward the goal of treating various neurological disorders.

Development of a microdevice-based human mesenchymal stem cell-mediated drug delivery system.

Cell-mediated drug delivery systems utilize living cells as vehicles to achieve controlled delivery of drugs. One of the systems features integrating cells with disk-shaped microparticles termed microdevices into cell-microdevice complexes that possess some unique advantages over their counterparts. Human mesenchymal stem cells (hMSCs) have been extensively studied as therapeutic cells and used as carrier cells for drug-loaded nanoparticles or other functional nanoparticles. This article presents the development of a microdevice-based hMSC-mediated drug delivery system for the first time. This study revealed that the microdevices could be attached to the hMSCs in a controlled and versatile manner; the produced hMSC-microdevice complexes were stable over cultivation and trypsinization, and the microdevice attachment did not affect the viability and proliferation of the hMSCs. Moreover, cultured microdevice-bound hMSCs retained their abilities to migrate on a flat surface, form a spheroid, and actively dissociate from the spheroid. These results indicate that this microdevice-based hMSC-mediated system promises to be further developed into a clinically viable drug delivery system.

Cell population balance of cardiovascular spheroids derived from human induced pluripotent stem cells.

Stem cell-derived cardiomyocytes and vascular cells can be used for a variety of applications such as studying human heart development and modelling human disease in culture. In particular, protocols based on modulation of Wnt signaling were able to produce high quality of cardiomyocytes or vascular cells from human pluripotent stem cells (hPSCs). However, the mechanism behind the development of 3D cardiovascular spheroids into either vascular or cardiac cells has not been well explored. Hippo/Yes-associated protein (YAP) signaling plays important roles in the regulation of organogenesis, but its impact on cardiovascular differentiation has been less evaluated. In this study, the effects of seeding density and a change in YAP signaling on 3D cardiovascular spheroids patterning from hPSCs were evaluated. Compared to 2D culture, 3D cardiovascular spheroids exhibited higher levels of sarcomeric striations and higher length-to-width ratios of α-actinin+ cells. The spheroids with high seeding density exhibited more α-actinin+ cells and less nuclear YAP expression. The 3D cardiovascular spheroids were also treated with different small molecules, including Rho kinase inhibitor (Y27632), Cytochalasin D, Dasatinib, and Lysophosphatidic acid to modulate YAP localization. Nuclear YAP inhibition resulted in lower expression of active ß-catenin, vascular marker, and MRTF, the transcription factor mediated by RhoGTPases. Y27632 also promoted the gene expression of MMP-2/-3 (matrix remodeling) and Notch-1 (Notch signaling). These results should help our understanding of the underlying effects for the efficient patterning of cardiovascular spheroids after mesoderm formation from hPSCs.

Highly Efficient Spectrally Stable Red Perovskite Light-Emitting Diodes.

Perovskite light-emitting diodes (LEDs) have recently attracted great research interest for their narrow emissions and solution processability. Remarkable progress has been achieved in green perovskite LEDs in recent years, but not blue or red ones. Here, highly efficient and spectrally stable red perovskite LEDs with quasi-2D perovskite/poly(ethylene oxide) (PEO) composite thin films as the light-emitting layer are reported. By controlling the molar ratios of organic salt (benzylammonium iodide) to inorganic salts (cesium iodide and lead iodide), luminescent quasi-2D perovskite thin films are obtained with tunable emission colors from red to deep red. The perovskite/polymer composite approach enables quasi-2D perovskite/PEO composite thin films to possess much higher photoluminescence quantum efficiencies and smoothness than their neat quasi-2D perovskite counterparts. Electrically driven LEDs with emissions peaked at 638, 664, 680, and 690 nm have been fabricated to exhibit high brightness and external quantum efficiencies (EQEs). For instance, the perovskite LED with an emission peaked at 680 nm exhibits a brightness of 1392 cd m-2 and an EQE of 6.23%. Moreover, exceptional electroluminescence spectral stability under continuous device operation has been achieved for these red perovskite LEDs.

Single cell patterning for high throughput sub-cellular toxicity assay.

Cell population based toxicity assays cannot distinguish responses of single cells and sub-cellular organelles; while single cell assays are limited by low statistical power due to small number of cells examined. This article reports a new single cell array based toxicity assay, in which cell responses at population level, single cell level and sub-cellular level can be obtained simultaneously at high throughput. The single cell array was produced by microcontact printing and selected area cell attachment, and exposed to damaging X-ray radiation, which was followed by fluorescence imaging after staining. Two image processing softwares written in Python and MATLAB were used to determine the expressions of proteins associated with cell migration and invasion, and production of reactive oxygen species (ROS), respectively. The results showed significant differences in responses at single cell level and distinctive molecular heterogeneity at sub-cellular level in a large population of cells upon exposure to radiation.

Catalase-Laden Microdevices for Cell-Mediated Enzyme Delivery.

Enzymes have been used to treat various human diseases and traumas. However, the therapeutic utility of free enzymes is impeded by their short circulation time, lack of targeting ability, immunogenicity, and inability to cross biological barriers. Cell-mediated drug delivery approach offers the unique capability to overcome these limitations, but the traditional cell-mediated enzyme delivery techniques suffer from drawbacks such as risk of intracellular degradation of and low loading capacity for the payload enzyme. This article presents the development of a novel cell-mediated enzyme delivery technique featuring the use of micrometer-sized disk-shaped particles termed microdevices. The microdevices are fabricated by layer-by-layer assembly and soft lithography with catalase being used as a model therapeutic enzyme. The amount of catalase in the microdevices can be controlled with the number of catalase layers. Catalase in the microdevices is catalytically active, and active catalase is slowly released from the microdevices. Moreover, cell-microdevice complexes are produced by attaching the catalase-laden microdevices to the external surface of both K562 cells and mouse embryonic stem cells. This technique is potentially applicable to other enzymes and cells and promises to be clinically useful.

Neural patterning of human induced pluripotent stem cells in 3-D cultures for studying biomolecule-directed differential cellular responses.

INTRODUCTION: Appropriate neural patterning of human induced pluripotent stem cells (hiPSCs) is critical to generate specific neural cells/tissues and even mini-brains that are physiologically relevant to model neurological diseases. However, the capacity of signaling factors that regulate 3-D neural tissue patterning in vitro and differential responses of the resulting neural populations to various biomolecules have not yet been fully understood. METHODS: By tuning neural patterning of hiPSCs with small molecules targeting sonic hedgehog (SHH) signaling, this study generated different 3-D neuronal cultures that were mainly comprised of either cortical glutamatergic neurons or motor neurons. RESULTS: Abundant glutamatergic neurons were observed following the treatment with an antagonist of SHH signaling, cyclopamine, while Islet-1 and HB9-expressing motor neurons were enriched by an SHH agonist, purmorphamine. In neurons derived with different neural patterning factors, whole-cell patch clamp recordings showed similar voltage-gated Na(+)/K(+) currents, depolarization-evoked action potentials and spontaneous excitatory post-synaptic currents. Moreover, these different neuronal populations exhibited differential responses to three classes of biomolecules, including (1) matrix metalloproteinase inhibitors that affect extracellular matrix remodeling; (2) N-methyl-d-aspartate that induces general neurotoxicity; and (3) amyloid ß (1-42) oligomers that cause neuronal subtype-specific neurotoxicity. CONCLUSIONS: This study should advance our understanding of hiPSC self-organization and neural tissue development and provide a transformative approach to establish 3-D models for neurological disease modeling and drug discovery. STATEMENT OF SIGNIFICANCE: Appropriate neural patterning of human induced pluripotent stem cells (hiPSCs) is critical to generate specific neural cells, tissues and even mini-brains that are physiologically relevant to model neurological diseases. However, the capability of sonic hedgehog-related small molecules to tune different neuronal subtypes in 3-D differentiation from hiPSCs and the differential cellular responses of region-specific neuronal subtypes to various biomolecules have not been fully investigated. By tuning neural patterning of hiPSCs with small molecules targeting sonic hedgehog signaling, this study provides knowledge on the differential susceptibility of region-specific neuronal subtypes derived from hiPSCs to different biomolecules in extracellular matrix remodeling and neurotoxicity. The findings are significant for understanding 3-D neural patterning of hiPSCs for the applications in brain organoid formation, neurological disease modeling, and drug discovery.

Asymmetric biodegradable microdevices for cell-borne drug delivery.

Use of live cells as carriers for drug-laden particulate structures possesses unique advantages for drug delivery. In this work, we report on the development of a novel type of particulate structures called microdevices for cell-borne drug delivery. The microdevices were fabricated by soft lithography with a disklike shape. Each microdevice was composed of a layer of biodegradable thermoplastic such as poly(lactic-co-glycolic acid). One face of the thermoplastic layer was covalently grafted with a cell-adhesive polyelectrolyte such as poly-l-lysine. This asymmetric structure allowed the microdevices to bind to live cells through bulk mixing without causing cell aggregation. Moreover, the cell-microdevice complexes were largely stable, and the viability and proliferation ability of the cells were not affected by the microdevices over a week. In addition, sustained release of a mock drug from the microdevices was demonstrated. This type of microdevice promises to be clinically useful for sustained intravascular drug delivery.

Enhanced radiation therapy with multilayer microdisks containing radiosensitizing gold nanoparticles.

A challenge of X-ray radiation therapy is that high dose X-rays at therapeutic conditions damage normal cells. This paper describes the use of gold nanoparticle-loaded multilayer microdisks to enhance X-ray radiation therapy, where each microdisk contains over 10(5) radiosensitizing nanoparticles. The microdisks are attached on cell membranes through electrostatic interaction. Upon X-ray irradiation, more photoelectrons and Auger electrons are generated in the vicinity of the nanoparticles, which cause water ionization and lead to the formation of free radicals that damage the DNA of adjacent cancer cells. By attaching a large amount of gold nanoparticles on cancer cells, the total X-ray dose required for DNA damage and cell killing can be reduced. Due to their controllable structure and composition, multilayer microdisks can be a viable choice for enhanced radiation therapy with nanoparticles.

Facile functionalization and assembly of live cells with microcontact-printed polymeric biomaterials.

The functionalization and assembly of live cells with microfabricated polymeric biomaterials have attracted considerable interest in recent years, but the conventional methods suffer from high cost, high complexity, long processing time or inadequate capability. The present study reports on the development of a novel method for functionalizing and assembling live cells by integrating microcontact printing of polymeric biomaterials with a temperature-sensitive sacrificial layer prepared by spin-coating. This method has been used not only to functionalize live cells with microscopic polyelectrolyte and thermoplastic structures of various sizes and shapes, but also to assemble the cells into macroscopic stripes and sheets. The method is applicable to multiple types of cells, including human leukemic cells, mouse embryonic stem cells and human mesenchymal stem cells in the forms of single cells and cell aggregates. In addition, the microcontact-printed structures can be prepared using biodegradable and biocompatible polyelectrolytes and thermoplastic. The unique combination of low cost, ease of use and high versatility renders this method potentially useful for diverse biomedical applications, including drug delivery, cell tracking and tissue engineering.