Evaluation of the insertion torque, implant stability quotient and drilled hole quality for different drill design: an in vitro Investigation.

OBJECTIVE: The purpose of the present study was to compare the insertion torque and implant stability quotient between different drill design for implant site preparation. MATERIALS AND METHODS: Synthetic blocks of bone (type I density) were used for drilling procedures. Three groups were evaluated: Group G1 - drilling with a single bur for a 4.2 mm conical implant; Group G2 and Group G3 - drilling with three consecutive burs for a 4.1 mm cylindrical implant and for a 4.3 mm conical implant respectively. For each group, 15 drilling procedures were performed without irrigation for 10-mm in-depth. The drilled hole quality (HQ) after the osteotomy for implant site preparation was measured in the five-first holes through a fully automated roundness/cylindricity instrument at three levels (top, middle, and bottom of the site). The insertion torque value (ITV) was achieved with a computed torquimeter and the implant stability quotient (ISQ) values were measured using a resonance frequency apparatus. RESULTS: The single drill (group 1) achieved a significantly higher ITV and ISQ than the multiple drills for osteotomy (groups 2 and 3). Group 1 and 3 displayed significantly better HQ than group 2. CONCLUSIONS: Within the limitations of the study, the results suggest that the hole quality, in addition to the insertion torque, may significantly affect implant primary stability.

Comparison of three hydroxyapatite/ß-tricalcium phosphate/collagen ceramic scaffolds: an in vivo study.

Calcium-phosphate ceramics, which have a composition similar to bone mineral, represent a potentially interesting synthetic bone graft substitute. In the present study, three porous hydroxyapatite (HA)/ß-tricalcium phosphate (ß-TCP)/collagen ceramic scaffolds were developed, characterized, and tested for their bone repairing capacity and osteoinductive potential in a New Zealand Rabbit model. The ratio of the ceramic components HA/-TCP/collagen varied from 40/30/30 to 50/20/30 and 60/20/20 (in wt %), respectively. None of the ceramic scaffolds succeeded in completely bridging the 6 mm calvarian defect with new bone after 60 days implantation. 60/20/20 ceramic scaffolds showed significantly more bone formation in the pores and in the periphery of the graft than the other two materials. Histomorphometric analysis revealed that the 40/30/30 scaffold produced best bone-to-implant contact (67.23 ± 0.34% with higher quality, closer contact) in comparison with 50/20/30 (54.87 ± 0.32%), and 60/20/20 (48.53 ± 0.31%). Both physicochemical and structural properties of the ceramic composites affected their in vivo behavior, either dependently or independently, emphasizing the importance of assessing bone repair parameters individually. The scaffolds may offer clinical applications in reconstructive surgery for treating bone pathologies.

Implants placed in the nasopalatine canal to rehabilitate severely atrophic maxillae: a retrospective study with long follow-up.

To assess the survival rate of implants placed in the nasopalatine canal for the rehabilitation of patients with atrophic maxillae and the level of satisfaction of these patients. A retrospective study was performed between 2000 and 2009 of patients with severe atrophy of edentulous maxillae (Cawood and Howell's class V) rehabilitated with implant-supported prostheses with 1 implant placed in the nasopalatine canal. A preoperative computed tomography scan was obtained of all patients and all surgeries were performed by the same surgeon. The following parameters were assessed: neurosensory status of the anterior palate (using the pointed/blunt discrimination method); implant success rate according to criteria described by Albrektsson et al; patient satisfaction with the prosthetic treatment (using visual analogue scales). Thirteen patients with a mean age of 54.8 years were treated, 5 men and 8 women. Seventy-eight implants were placed: 13 in the nasopalatine canal, 6 in the zygomatic bone, 12 in the pterygomaxillary region, 2 in the frontomaxillary buttress and 45 in other locations. Six patients reported a slight decrease in sensitivity in the anterior palate after surgery, which disappeared in all cases within a few weeks. Two early failures (before prosthetic loading) and no late failures (after prosthetic loading) of nasopalatine implants were recorded, yielding a success rate for these implants of 84.6% after a mean follow-up of 70 months (range 24 to 132 months. High patient satisfaction with the prosthetic restoration was generally achieved in terms of comfort, stability, function, esthetics, and ease of cleaning. Residual bone is associated with the nasopalatine canal, even in patients with severe maxillary atrophy. This canal may be considered a possible location for an anterior implant when rehabilitating atrophic patients using implant-supported prostheses.