Injective Programmable Proanthocyanidin-Coordinated Zinc-Based Composite Hydrogel for Infected Bone Repair.

Effectively integrating infection control and osteogenesis to promote infected bone repair is challenging. Herein, injective programmable proanthocyanidin (PC)-coordinated zinc-based composite hydrogels (ipPZCHs) are developed by compositing antimicrobial and antioxidant PC-coordinated zinc oxide (ZnO) microspheres with thioether-grafted sodium alginate (TSA), followed by calcium chloride (CaCl2 ) crosslinking. Responsive to the high endogenous reactive oxygen species (ROS) microenvironment in infected bone defects, the hydrophilicity of TSA can be significantly improved, to trigger the disintegration of ipPZCHs and the fast release of PC-coordinated ZnOs. This together with the easily dissociable PC-Zn2+ coordination induced fast release of antimicrobial zinc (Zn2+ ) with/without silver (Ag+ ) ions from PC-coordinated ZnOs (for Zn2+ , > 100 times that of pure ZnO) guarantees the strong antimicrobial activity of ipPZCHs. The exogenous ROS generated by ZnO and silver nanoparticles during the antimicrobial process further speeds up the disintegration of ipPZCHs, augmenting the antimicrobial efficacy. At the same time, ROS-responsive degradation/disintegration of ipPZCHs vacates space for bone ingrowth. The concurrently released strong antioxidant PC scavenges excess ROS thus enhances the immunomodulatory (in promoting the anti-inflammatory phenotype (M2) polarization of macrophages) and osteoinductive properties of Zn2+ , thus the infected bone repair is effectively promoted via the aforementioned programmable and self-adaptive processes.

Chitosan nanofibrous scaffold with graded and controlled release of ciprofloxacin and BMP-2 nanoparticles for the conception of bone regeneration.

The repair of bone defects using grafts is commonly employed in clinical practice. However, the risk of infection poses a significant concern. Tissue engineering scaffolds with antibacterial functionalities offer a better approach for bone tissue repair. In this work, firstly, two kinds of nanoparticles were prepared using chitosan to complex with ciprofloxacin and BMP-2, respectively. The ciprofloxacin complex nanoparticles improved the dissolution efficiency of ciprofloxacin achieving a potent antibacterial effect and cumulative release reached 95 % in 7 h. For BMP-2 complexed nanoparticles, the release time points can be programmed at 80 h, 100 h or 180 h by regulating the number of coating chitosan layers. Secondly, a functional scaffold was prepared by combining the two nanoparticles with chitosan nanofibers. The microscopic nanofiber structure of the scaffold with 27.28 m2/g specific surface area promotes cell adhesion, high porosity provides space for cell growth, and facilitates drug loading and release. The multifunctional scaffold exhibits programmed release function, and has obvious antibacterial effect at the initial stage of implantation, and releases BMP-2 to promote osteogenic differentiation of mesenchymal stem cells after the antibacterial effect ends. The scaffold is expected to be applied in clinical bone repair and graft infection prevention.

Malate-Based Biodegradable Scaffolds Activate Cellular Energetic Metabolism for Accelerated Wound Healing.

The latest advancements in cellular bioenergetics have revealed the potential of transferring chemical energy to biological energy for therapeutic applications. Despite efforts, a three-dimensional (3D) scaffold that can induce long-term bioenergetic effects and facilitate tissue regeneration remains a big challenge. Herein, the cellular energetic metabolism promotion ability of l-malate, an important intermediate of the tricarboxylic acid (TCA) cycle, was proved, and a series of bioenergetic porous scaffolds were fabricated by synthesizing poly(diol l-malate) (PDoM) prepolymers via a facial one-pot polycondensation of l-malic acid and aliphatic diols, followed by scaffold fabrication and thermal-cross-linking. The degradation products of the developed PDoM scaffolds can regulate the metabolic microenvironment by entering mitochondria and participating in the TCA cycle to elevate intracellular adenosine triphosphate (ATP) levels, thus promoting the cellular biosynthesis, including the production of collagen type I (Col1a1), fibronectin 1 (Fn1), and actin alpha 2 (Acta2/α-Sma). The porous PDoM scaffold was demonstrated to support the growth of the cocultured mesenchymal stem cells (MSCs) and promote their secretion of bioactive molecules [such as vascular endothelial growth factor (VEGF), transforming growth factor-ß1 (TGF-ß1), and basic fibroblast growth factor (bFGF)], and this stem cells-laden scaffold architecture was proved to accelerate wound healing in a critical full-thickness skin defect model on rats.

Zinc-Based Tannin-Modified Composite Microparticulate Scaffolds with Balanced Antimicrobial Activity and Osteogenesis for Infected Bone Defect Repair.

Treatment of infected bone defects is a major clinical challenge; bioactive materials combining sufficient antimicrobial activity and favorable osteogenic ability are urgently needed. In this study, through a facile one-pot hydrothermal reaction of zinc acetate in the presence of tannic acid (TA), with or without silver nitrate (AgNO3 ), is used to synthesize a TA or TA and silver nanoparticles (Ag NPs) bulk-modified zinc oxide (ZnO) (ZnO-TA or ZnO-TA-Ag), which is further composited with zein to fabricate porous microparticulate scaffolds for infected bone defect repair. Bulk TA modification significantly improves the release rate of antibacterial metal ions (Zn2+ release rate is >100 times that of ZnO). Fast and long-lasting (>35 d) Zn2+ and Ag+ release guaranteed sufficient antibacterial capability and excellent osteogenic properties in promoting the osteogenic differentiation of bone marrow mesenchymal stem cells and endogenous citric acid production and mineralization and providing considerable immunomodulatory activity in promoting M2 polarization of macrophages. At the same time, synchronously-released TA could scavenge endogenous reactive oxygen species (ROS) and ROS produced by antibacterial metal ions, effectively balancing antibacterial activity and osteogenesis to sufficiently control infection while protecting the surrounding tissue from damage, thus effectively promoting infected bone defect repair.

Anti-oxidant anti-inflammatory and antibacterial tannin-crosslinked citrate-based mussel-inspired bioadhesives facilitate scarless wound healing.

The revolutionary role of tissue adhesives in wound closure, tissue sealing, and bleeding control necessitates the development of multifunctional materials capable of effective and scarless healing. In contrast to the use of traditionally utilized toxic oxidative crosslinking initiators (exemplified by sodium periodate and silver nitrate), herein, the natural polyphenolic compound tannic acid (TA) was used to achieve near instantaneous (<25s), hydrogen bond mediated gelation of citrate-based mussel-inspired bioadhesives combining anti-oxidant, anti-inflammatory, and antimicrobial activities (3A-TCMBAs). The resulting materials were self-healing and possessed low swelling ratios (<60%) as well as considerable mechanical strength (up to ∼1.0 MPa), elasticity (elongation ∼2700%), and adhesion (up to 40 kPa). The 3A-TCMBAs showed strong in vitro and in vivo anti-oxidant ability, favorable cytocompatibility and cell migration, as well as photothermal antimicrobial activity against both Staphylococcus aureus and Escherichia coli (>90% bacterial death upon near-infrared (NIR) irradiation). In vivo evaluation in both an infected full-thickness skin wound model and a rat skin incision model demonstrated that 3A-TCMBAs + NIR treatment could promote wound closure and collagen deposition and improve the collagen I/III ratio on wound sites while simultaneously inhibiting the expression of pro-inflammatory cytokines. Further, phased angiogenesis was observed via promotion in the early wound closure phases followed by inhibition and triggering of degradation & remodeling of the extracellular matrix (ECM) in the late stage (supported by phased CD31 (platelet endothelial cell adhesion molecule-1) PDGF (platelet-derived growth factor) and VEGF (vascular endothelial growth factor) expression as well as elevated matrix metalloprotein-9 (MMP-9) expression on day 21), resulting in scarless wound healing. The significant convergence of material and bioactive properties elucidated above warrant further exploration of 3A-TCMBAs as a significant, new class of bioadhesive.

On-Demand Removable Self-Healing and pH-Responsive Europium-Releasing Adhesive Dressing Enables Inflammatory Microenvironment Modulation and Angiogenesis for Diabetic Wound Healing.

Current diabetic wound treatments remain unsatisfactory due to the lack of a comprehensive strategy that can integrate strong applicability (tissue adhesiveness, shape adaptability, fast self-healability, and facile dressing change) with the initiation and smooth connection of the cascade wound healing processes. Herein, benefiting from the multifaceted bonding ability of tannic acid to metal ions and various polymers, a family of tannin-europium coordination complex crosslinked citrate-based mussel-inspired bioadhesives (TE-CMBAs) are specially developed for diabetic wound healing. TE-CMBAs can gel instantly (< 60 s), possess favorable shape-adaptability, considerable mechanical strengths, high elasticity, considerable wet tissue adhesiveness (≈40 kPa), favorable photothermal antimicrobial activity, excellent anti-oxidant activity, biocompatibility, and angiogenetic property. The reversible hydrogen bond crosslinking and sensitive metal-phenolic coordination also confers TE-CMBAs with self-healability, pH-responsive europium ion and TA releasing properties and on-demand removability upon mixing with borax solution, enabling convenient painless dressing change and the smooth connection of inflammatory microenvironment modulation, angiogenesis promotion, and effective extracellular matrix production leveraging the acidic pH condition of diabetic wounds. This adhesive dressing provides a comprehensive regenerative strategy for diabetic wound management and can be extended to other complicated tissue healing scenarios.

Recent Advances in the Development and Antimicrobial Applications of Metal-Phenolic Networks.

Due to the abuse of antibiotics and the emergence of multidrug resistant microorganisms, medical devices, and related biomaterials are at high risk of microbial infection during use, placing a heavy burden on patients and healthcare systems. Metal-phenolic networks (MPNs), an emerging organic-inorganic hybrid network system developed gradually in recent years, have exhibited excellent multifunctional properties such as anti-inflammatory, antioxidant, and antibacterial properties by making use of the coordination between phenolic ligands and metal ions. Further, MPNs have received widespread attention in antimicrobial infections due to their facile synthesis process, excellent biocompatibility, and excellent antimicrobial properties brought about by polyphenols and metal ions. In this review, different categories of biomaterials based on MPNs (nanoparticles, coatings, capsules, hydrogels) and their fabrication strategies are summarized, and recent research advances in their antimicrobial applications in biomedical fields (e.g., skin repair, bone regeneration, medical devices, etc.) are highlighted.

Graphene Nanosheets as Lubricant Additives: Effects of Nature and Size on Lubricating Performance.

Graphene has been widely investigated as an additive in lubricating oils to enhance their tribological performance. Here, the effects of the nature and size of the graphene nanosheets on the tribological performance were investigated with the hydrogenated hydroxyl-terminated polybutadiene dioctoate (O-HHTPB-O) as a model base oil after alkylation of the graphene oxide (GO) of different sizes with 1-dodecylamine (DA) and reduction. The 1-dodecylamine-modified graphene oxide (DA-GO) showed better dispersibility in the O-HHTPB-O base oil and subsequently better tribological performance than the reduced one (DA-rGO) for both the larger graphene oxide nanosheets (GOL) and the smaller graphene oxide nanosheets (GOS). The DA-GOS exhibited better wear-reduction performance than the DA-GOL, owing to its smaller size and higher polarity. Although the DA-GOL could be ground during the friction, the friction and wear in the original period affected the complete period lubricating performance.

Development of tannin-bridged cerium oxide microcubes-chitosan cryogel as a multifunctional wound dressing.

Efficient resolution of oxidative stress, inflammation, and bacterial infections is crucial for wound healing. To surmount these problems, tannic acid (TA)-bridged CeO2 microcubes and chitosan (CS) (CS-TA@CeO2) cryogel was fabricated through hydrogen bonding interactions as a multifunctional wound dressing. Successful introduction and uniform incorporation TA@CeO2 microtubules enter the CS network. Thus-obtained CS-TA@CeO2 cryogels displayed a suitable porous structure and swelling rate. Cryogels has excellent tissue adhesion, blood cell coagulation and hemostasis, anti-infection, and cell recruitment functions. In addition, the cryogel also showed good antibacterial activity against gram-positive bacteria and gram-negative bacteria. Based on the in vivo study of the multifunctional mixed cryogels, it promotes fibroblasts' adhesion and proliferation and significantly improves cell proliferation and tissue remodelling in wound beds. Furthermore, the chronic wound healing process in infected full-thickness skin defect models showed that cryogels significantly enhanced angiogenesis, collagen deposition and granulation tissue formation by providing a large amount of antioxidant activity. Therefore, this multifunctional mixed cryogels has potential clinical application value.

The application of platelet-rich plasma in the treatment of knee osteoarthritis: A literature review.

BACKGROUND: Primary knee osteoarthritis remains a difficult-to-control degenerative disease. With the rise in average life expectancy and the incidence of obesity, osteoarthritis has brought an increasing economic and physical burden on people. This article summarizes the latest understanding of platelet-rich plasma in the treatment of knee osteoarthritis, and reviews the economic issues of PRP. METHODS: The literatures in Pubmed, Embase, Cochrane library, Web-science and other databases were searched, and literature inclusion and exclusion criteria were formulated. According to the Cochrane systematic reviewer's manual, the included literatures were grouped, and qualitative descriptions and quantitative meta-analysis were performed. Continuous statistical methods were used to compare the effects and adverse effects of PRP before and after treatment, as well as between PRP and other conservative treatments. RESULTS: A total of 12 randomized controlled trials were included in this study. A total of 959 KOA patients (1070 knees) were enrolled and followed for 3-12 months. PRP total knee scores were significantly better than baseline at 1, 2, 3, 6 and 12 months after treatment (1 month: SMD = 0.60, P < 0.01; 2 months: SMD = 0.98, P < 0.01; 3 months: SMD = 1.16, P < 0.01; 6 months: SMD = 1.49, P < 0.01; 12 months: SMD = 1.47, P < 0.01). In terms of adverse reactions, PRP did not increase the risk of adverse events compared with HA (OR = 0.96, P = 0.85). CONCLUSIONS: Compared with many other treatment methods, intra-articular injection of PRP has been proven to be safe and effective to improve the quality of life of patients with KOA.

Functional Macromolecular Adhesives for Bone Fracture Healing.

Compared with traditional internal fixation devices, bone adhesives are expected to exhibit remarkable advantages, such as improved fixation of comminuted fractures and maintained spatial location of fractured scattered bone pieces in treating bone injuries. In this review, different bone adhesives are summarized from the aspects of bone tissue engineering, and the applications of bone adhesives are emphasized. The concepts of "liquid scaffold" and "liquid plate" are proposed to summarize two different research directions of bone adhesives. Furthermore, significant advances of bone adhesives in recent years in mechanical strength, osseointegration, osteoconductivity, and osteoinductivity are discussed. We conclude this topic by providing perspectives on the state-of-the-art research progress and future development trends of bone adhesives. We hope this review will provide a comprehensive summary of bone adhesives and inspire more extensive and in-depth research on this subject.

Protein-based natural antibacterial materials and their applications in food preservation.

Plastics materials used for food packaging are recalcitrant, leading to a growing global environmental problem, which arouses the attention of environmental protection departments in many countries. Therefore, to meet the increasing demand for sustainable and environment-friendly consumer products, it is necessary for the food industry to develop natural antibacterial materials for food preservation. This review summarizes the common biodegradable natural antimicrobial agents and their applications in food preservation; as well as an overview of five commonly used biodegradable protein-based polymers, such as zein, soy protein isolate, gelatin and whey protein, with special emphasis on the advantages of protein-based biopolymers and their applications in food packaging industry.

Citrate-based mussel-inspired magnesium whitlockite composite adhesives augmented bone-to-tendon healing.

Citrate-based mussel-inspired whitlockite composite adhesives (CMWAs) were developed and administered to the bone-tendon interface in anterior cruciate ligament (ACL) reconstruction. CMWAs could improve the initial bone-tendon bonding strength, promote the bony inward growth from the bone tunnel and enhance the chondrogenesis and osteogenesis of the bone-tendon interface, thus augmenting bone-to-tendon healing.

Facile Polyphenol-Europium Assembly Enabled Functional Poly(l-Lactic Acid) Nanofiber Mats with Enhanced Antioxidation and Angiogenesis for Accelerated Wound Healing.

Burns, trauma, surgery and chronic diabetic ulcers are the most common reasons causing skin wounds in clinic. Thus, developing a functional wound dressing has been an imperative issue. Herein, functional wound dressing (poly(l-lactic acid) PLLA-((tanic acid (TA)/europium (Eu))n ) is fabricated through a facile polyphenol-europium ion assembly to ameliorate wound microenvironment via scavenging excessive reactive oxygen species (ROS) and promoting angiogenesis. The physicochemical characterization indicates that the multicycle assembled TA/Eu is uniformly deposited on PLLA-(TA/Eu)n nanofiber mats surface. In vitro 2,2-diphenyl-1-picrylhydrazyl (DPPH) antioxidant tests display good antioxidant ability by scavenging more than 75% ROS, and significantly increasing the antioxidant enzyme levels in vivo. Cytocompatibility experiments illustrate that PLLA-(TA/Eu)n nanofiber mats can promote the adhesion and proliferation of human umbilical vein endothelial cells (HUVECs) and L929 cells. Meanwhile, real-time quantitative polymerase chain reaction (PCR) (RT-qPCR) and western blot assays illustrate that it can stimulate proangiogenesis by elevating the expression of angiogenesis-related genes and proteins. In vivo Sprague-Dawley (SD) rats experiments indicate that PLLA-(TA/Eu)n nanofiber mats can significantly promote wound healing by improving both angiogenesis and antioxidant activity. Taken together, the functional PLLA-(TA/Eu)n nanofiber mats can offer significant promise as wound dressing for accelerated wound healing.

Highly efficient and recyclable polyolefin-based magnetic sorbent for oils and organic solvents spill cleanup.

The oil dispersants have been applied in a broad oil pollution area, but the dispersed oil caused environmental problems during sedimentation. Unlike oil dispersants, flake type polyolefin-based oil absorbent (PA) is not emulsified and shows excellent swelling characteristic for oil removal. However, the sprayed PA flakes cannot be fully collected due to its tiny architectures, the uncollected flakes can cause unintentional secondary pollution. In this study, we develop a kind of flake type polyolefin-based magnetic absorbent (PMA) hybridized with magnetic nanoparticle, to facilitate the collection process. The magnetic nanoparticle is uniformly dispersed in PMA due to the hydrophobic functionalization of iron oxide nanoparticle. This enables the convenient collection of isolated sorbent flakes even when they were placed in the marine system and show a desirable oil recovery performance up to about 37 times for organic solvent. Moreover, oil-soaked PMA flakes can be fully converted into refined oil via a pyrolysis process. After pyrolysis, the thermally undecomposed compounds, which comprise of carbon residue and magnetic nanoparticle, can be also separated by a magnet. The as-prepared flake type PMA possesses good oil recovery performance, fast magnetic response, and efficient oil recycling, thus representing an environmentally promising method for oil spill cleanup.

Recent advances in the development of nitric oxide-releasing biomaterials and their application potentials in chronic wound healing.

Chronic wounds, such as pressure ulcers, vascular ulcers and diabetic foot ulcers (DFUs), often stay in a state of pathological inflammation and suffer from persistent infection, excess inflammation, and hypoxia, thus they are difficult to be healed. Nitric oxide (NO) plays a critical role in the regulation of various wound healing processes, including inflammatory response, cell proliferation, collagen formation, antimicrobial action and angiogenesis. The important role of NO in wound healing attracts intensive research focus on NO-based wound healing therapy. However, the application of NO gas therapy needs to resolve the intrinsic shortcomings of gas therapy, such as short storage and release times as well as temporal and spatial uncontrollability of the release mode. So far, various types of NO donors, including organic nitrates (RONO2), nitrites (RONO), S-nitrosothiols (RSNOs), nitrosamines, N-diazeniumdiolates (NONOates), and metal-NO complexes, have been developed to solidify gaseous NO and they were further encapsulated in or conjugated onto a variety of biomaterial vectors to develop NO delivery systems. NO synthetic enzyme mimics to catalyze the production and release of NO from L-arginine have also been developed. This paper reviews recent advances of NO donors, biomaterial vectors, thus-formed NO delivery systems, as well as recently emerged NO synthetic enzyme mimics. Furthermore, this review also summarizes the functions of NO releasing biomaterials that would benefit chronic wound healing, including antibacterial properties and the promotion of angiogenesis, as well as the convenient combination of light/thermal induced NO release with light/thermal therapies, and the prospects for future developing trends in this area.

Platinum-crosslinking polymeric nanoparticle for synergetic chemoradiotherapy of nasopharyngeal carcinoma.

Despite extensive use of radiotherapy in nasopharyngeal carcinoma (NPC) treatment because of its high radiosensitivity, there have been huge challenges in further improving therapeutic effect, meanwhile obviously reducing radiation damage. To this end, synergistic chemoradiotherapy has emerged as a potential strategy for highly effective NPC therapy. Here, we developed RGD-targeted platinum-based nanoparticles (RGD-PtNPs, denoted as RPNs) to achieve targeted chemoradiotherapy for NPC. Such nanoparticles consist of an RGD-conjugated shell and a cis-platinum (CDDP) crosslinking core. Taking advantage of RGD, the RPNs may effectively accumulate in tumor, penetrate into tumor tissues and be taken by cancer cells, giving rise to a high delivery efficiency of CDDP. When they are fully enriched in tumor sites, the CDDP loaded RPNs can act as radiotherapy sensitizer and chemotherapy agents. By means of X-ray-promoted tumor cell uptake of nanoparticle and CDDP-induced cell cycle arrest in radiation-sensitive G2/M phases, RPNs may offer remarkable therapeutic outcome in the synergistic chemoradiotherapy for NPC.

Periodic Polymerization and the Generation of Polymer Giant Vesicles Autonomously Driven by pH Oscillatory Chemistry.

Using the radicals generated during pH oscillations, a semibatch pH oscillator is used as the chemical fuel and engine to drive polymerization induced self-assembly (PISA) for the one-pot autonomous synthesis of functional giant vesicles. Vesicles with diameters ranging from sub-micron to ∼5 µm are generated. Radical formation is found to be switched ON/OFF and be autonomously controlled by the pH oscillator itself, inducing a periodic polymerization process. The mechanism underlying these complex processes is studied and compared to conventional (non-oscillatory) initiation by the same redox pair. The pH oscillations along with the continuous increase in salt concentration in the semibatch reactor make the self-assembled objects undergo morphological evolution. This process provides a self-regulated means for the synthesis of soft giant polymersomes and opens the door for new applications of pH oscillators in a variety of contexts, from the exploration of new geochemical scenarios for the origin of life and the autonomous emergence of the necessary free-energy and proton gradients, to the creation of active functional microreactors and programmable release of cargo molecules for pH-responsive materials.