High-Power Impulse Magnetron Sputter Deposition of Ag on Self-Assembled Au Nanoparticle Arrays at Low-Temperature Dewetting Conditions.

Plasmons have facilitated diverse analytical applications due to the boosting signal detectability by hot spots. In practical applications, it is crucial to fabricate straightforward, large-scale, and reproducible plasmonic substrates. Dewetting treatment, via applying direct thermal annealing of metal films, has been used as a straightforward method in the fabrication of such plasmonic nanostructures. However, tailoring the evolution of the dewetting process of metal films poses considerable experimental complexities, mainly due to nanoscale structure formation. Here, we use grazing-incidence small- and wide-angle X-ray scattering for the in situ investigation of the high-power impulse magnetron sputter deposition of Ag on self-assembled Au nanoparticle arrays at low-temperature dewetting conditions. This approach allows us to examine both the direct formation of binary Au/Ag nanostructure and the consequential impact of the dewetting process on the spatial arrangement of the bimetallic nanoparticles. It is observed that the dewetting at 100 °C is sufficient to favor the establishment of a homogenized structural configuration of bimetallic nanostructures, which is beneficial for localized surface plasmon resonances (LSPRs). The fabricated metal nanostructures show potential application for the surface-enhanced Raman scattering (SERS) detection of rhodamine 6G molecules. As SERS platform, bimetallic nanostructures formed with dewetting conditions turn out to be superior to those without dewetting conditions. The method in this work is envisioned as a facile strategy for the fabrication of plasmonic nanostructures.

Triple-junction solar cells with cyanate in ultrawide-bandgap perovskites.

Perovskite bandgap tuning without quality loss makes perovskites unique among solar absorbers, offering promising avenues for tandem solar cells1,2. However, minimizing the voltage loss when their bandgap is increased to above 1.90 eV for triple-junction tandem use is challenging3-5. Here we present a previously unknown pseudohalide, cyanate (OCN-), with a comparable effective ionic radius (1.97 Å) to bromide (1.95 Å) as a bromide substitute. Electron microscopy and X-ray scattering confirm OCN incorporation into the perovskite lattice. This contributes to notable lattice distortion, ranging from 90.5° to 96.6°, a uniform iodide-bromide distribution and consistent microstrain. Owing to these effects, OCN-based perovskite exhibits enhanced defect formation energy and substantially decreased non-radiative recombination. We achieved an inverted perovskite (1.93 eV) single-junction device with an open-circuit voltage (VOC) of 1.422 V, a VOC × FF (fill factor) product exceeding 80% of the Shockley-Queisser limit and stable performance under maximum power point tracking, culminating in a 27.62% efficiency (27.10% certified efficiency) perovskite-perovskite-silicon triple-junction solar cell with 1 cm2 aperture area.

In Situ Surface Reconstruction toward Planar Heterojunction for Efficient and Stable FAPbI3 Quantum Dot Solar Cells.

Pure-phase α-FAPbI3 quantum dots (QDs) are the focus of an increasing interest in photovoltaics due to their superior ambient stability, large absorption coefficient, and long charge-carrier lifetime. However, the trap states induced by the ligand-exchange process limit the photovoltaic performances. Here, a simple post treatment using methylamine thiocyanate is developed to reconstruct the FAPbI3 -QD film surface, in which a MAPbI3 capping layer with a thickness of 6.2 nm is formed on the film top. This planar perovskite heterojunction leads to a reduced density of trap-states, a decreased band gap, and a facilitated charge carrier transport. As a result, a record high power conversion efficiency (PCE) of 16.23% with negligible hysteresis is achieved for the FAPbI3 QD solar cell, and it retains over 90% of the initial PCE after being stored in ambient environment for 1000 h.

Trace Water in Lead Iodide Affecting Perovskite Crystal Nucleation Limits the Performance of Perovskite Solar Cells.

The experimental replicability of highly efficient perovskite solar cells (PSCs) is a persistent challenge faced by laboratories worldwide. Although trace impurities in raw materials can impact the experimental reproducibility of high-performance PSCs, the in situ study of how trace impurities affect perovskite film growth is never investigated. Here, light is shed on the impact of inevitable water contamination in lead iodide (PbI2 ) on the replicability of device performance, mainly depending on the synthesis methods of PbI2 . Through synchrotron-based structure characterization, it is uncovered that even slight additions of water to PbI2 accelerate the crystallization process in the perovskite layer during annealing. However, this accelerated crystallization also results in an imbalance of charge-carrier mobilities, leading to a degradation in device performance and reduced longevity of the solar cells. It is also found that anhydrous PbI2 promotes a homogenous nucleation process and improves perovskite film growth. Finally, the PSCs achieve a remarkable certified power conversion efficiency of 24.3%. This breakthrough demonstrates the significance of understanding and precisely managing the water content in PbI2 to ensure the experimental replicability of high-efficiency PSCs.

Morphological Insights into the Degradation of Perovskite Solar Cells under Light and Humidity.

Perovskite solar cells (PSCs) have achieved competitive power conversion efficiencies compared with established solar cell technologies. However, their operational stability under different external stimuli is limited, and the underlying mechanisms are not fully understood. In particular, an understanding of degradation mechanisms from a morphology perspective during device operation is missing. Herein, we investigate the operational stability of PSCs with CsI bulk modification and a CsI-modified buried interface under AM 1.5G illumination and 75 ± 5% relative humidity, respectively, and concomitantly probe the morphology evolution with grazing-incidence small-angle X-ray scattering. We find that volume expansion within perovskite grains, induced by water incorporation, initiates the degradation of PSCs under light and humidity and leads to the degradation of device performance, in particular, the fill factor and short-circuit current. However, PSCs with modified buried interface degrade faster, which is ascribed to grain fragmentation and increased grain boundaries. In addition, we reveal a slight lattice expansion and PL redshifts in both PSCs after exposure to light and humidity. Our detailed insights from a buried microstructure perspective on the degradation mechanisms under light and humidity are essential for extending the operational stability of PSCs.

Process-Aid Solid Engineering Triggers Delicately Modulation of Y-Series Non-Fullerene Acceptor for Efficient Organic Solar Cells.

Volatile solids with symmetric π-backbone are intensively implemented on manipulating the nanomorphology for improving the operability and stability of organic solar cells. However, due to the isotropic stacking, the announced solids with symmetric geometry cannot modify the microscopic phase separation and component distribution collaboratively, which will constrain the promotion of exciton splitting and charge collection efficiency. Inspired by the superiorities of asymmetric configuration, a novel process-aid solid (PAS) engineering is proposed. By coupling with BTP core unit in Y-series molecule, an asymmetric, volatile 1,3-dibromo-5-chlorobenzene solid can induce the anisotropic dipole direction, elevated dipole moment, and interlaminar interaction spontaneously. Due to the synergetic effects on the favorable phase separation and desired component distribution, the PAS-treated devices feature the evident improvement of exciton splitting, charge transport, and collection, accompanied by the suppressed trap-assisted recombination. Consequently, an impressive fill factor of 80.2% with maximum power conversion efficiency (PCE) of 18.5% in the PAS-treated device is achieved. More strikingly, the PAS-treated devices demonstrate a promising thickness-tolerance character, where a record PCE of 17.0% is yielded in PAS devices with a 300 nm thickness photoactive layer, which represents the highest PCE for thick-film organic solar cells.

Tailoring the Optical Properties of Sputter-Deposited Gold Nanostructures on Nanostructured Titanium Dioxide Templates Based on In Situ Grazing-Incidence Small-Angle X-ray Scattering Determined Growth Laws.

Gold/titanium dioxide (Au/TiO2) nanohybrid materials have been widely applied in various fields because of their outstanding optical and photocatalytic performance. By state-of-the-art polymer templating, it is possible to make uniform nanostructured TiO2 layers with potentially large-scale processing methods. We use customized polymer templating to achieve TiO2 nanostructures with different morphologies. Au/TiO2 hybrid thin films are fabricated by sputter deposition. An in-depth understanding of the Au morphology on the TiO2 templates is achieved with in situ grazing-incidence small-angle X-ray scattering (GISAXS) during the sputter deposition. The resulting Au nanostructure is largely influenced by the TiO2 template morphology. Based on the detailed understanding of the Au growth process, characteristic distances can be selected to achieve tailored Au nanostructures at different Au loadings. For selected sputter-deposited Au/TiO2 hybrid thin films, the optical response with a tailored localized surface plasmon resonance is demonstrated.

Synergistic Interplay between Asymmetric Backbone Conformation, Molecular Aggregation, and Charge-Carrier Dynamics in Fused-Ring Electron Acceptor-Based Bulk Heterojunction Solar Cells.

Asymmetric fused-ring electron acceptors (a-FREAs) have proved to be a promising type of electron acceptor for high-performance organic solar cells (OSCs). However, the relationship among molecular structures of a-FREAs and their nanoscale morphology, charge-carrier dynamics, and device performance remains unclear. In this contribution, two FREAs differing in conjugated backbone geometry with an asymmetric conformation (IPT-2F) or symmetric one (INPIC-2F) are selected to systematically explore the superiorities of the asymmetric conformation. Despite the frailer extinction coefficient and weaker crystallinity, IPT-2F shows stronger dipole interactions in the asymmetrical backbone, which would induce a closer lamellar packing than that of the symmetrical counterpart. Using PBDB-T as the electron donor, the IPT-2F-based OSCs achieve the best power conversion efficiency of 14.0%, which is ca. 67% improvement compared to the INPIC-2F-based ones (8.37%), resulting from a simultaneously increased short-circuited current density (Jsc) and fill factor. Systematical investigations on optoelectronic and morphological properties show that the asymmetric conformation-structured IPT-2F exhibits better miscibility with the polymer donor to induce a favorable blend ordering with small domain sizes and suitable phase separation compared to the INPIC-2F symmetric molecule. This facilitates an efficient charge generation and transport, inhibits charge-carrier recombination, and promotes valid charge extraction in IPT-2F-based devices.

In Situ Study of Order Formation in Mesoporous Titania Thin Films Templated by a Diblock Copolymer during Slot-Die Printing.

Slot-die printing, a large-scale deposition technique, is applied to fabricate mesoporous titania films. Printing is interesting, for example, for scaling up solar cells where titania films with an interconnected mesoporous network and a large surface-to-volume ratio are desired as photoanodes. A fundamental understanding of the structure evolution during printing is of high significance in tailoring these films. In this work, we provide important insights into the self-assembly of the slot-die-printed titania/polystyrene-block-poly(ethylene oxide) (PS-b-PEO) micelles into ordered hybrid structures in real time via in situ grazing-incidence small-angle X-ray scattering (GISAXS). GISAXS allows for tracking both vertical and lateral structure development of the film formation process. In the hybrid film, a face-centered cubic (FCC) structure is preferentially formed at the interfaces with air and with the substrate, while a defect-rich mixed FCC and body-centered cubic (BCC) structure forms in the bulk. After calcination, the surface and inner morphologies of the obtained nanostructured titania films are compared with the spin-coated analogues. In the printed films, the initially formed nanoscale structure of the hybrid film is preserved, and the resulting mesoporous titania film shows a superior order as compared with the spin-coated thin films which can be beneficial for future applications.

Sodium Dodecylbenzene Sulfonate Interface Modification of Methylammonium Lead Iodide for Surface Passivation of Perovskite Solar Cells.

Perovskite solar cells (PSCs) have been developed as a promising photovoltaic technology because of their excellent photovoltaic performance. However, interfacial recombination and charge carrier transport losses at the surface greatly limit the performance and stability of PSCs. In this work, the fabrication of high-quality PSCs based on methylammonium lead iodide with excellent ambient stability is reported. An anionic surfactant, sodium dodecylbenzene sulfonate (SDBS), is introduced to simultaneously passivate the defect states and stabilize the cubic phase of the perovskite film. The SDBS located at grain boundaries and the surface of the active layer can effectively passivate under-coordinated lead ions and protect the perovskite components from water-induced degradation. As a result, a champion power conversion efficiency (PCE) of 19.42% is achieved with an open-circuit voltage (VOC) of 1.12 V, a short-circuit current (JSC) of 23.23 mA cm-2, and a fill factor (FF) of 74% in combination with superior moisture stability. The SDBS-passivated devices retain 80% of their initial average PCE after 2112 h of storage under ambient conditions.

Hot Hydrocarbon-Solvent Slot-Die Coating Enables High-Efficiency Organic Solar Cells with Temperature-Dependent Aggregation Behavior.

Organic solar cells (OSCs) have made rapid progress in terms of their development as a sustainable energy source. However, record-breaking devices have not shown compatibility with large-scale production via solution processing in particular due to the use of halogenated environment-threatening solvents. Here, slot-die fabrication with processing involving hydrocarbon-based solvents is used to realize highly efficient and environmentally friendly OSCs. Highly compatible slot-die coating with roll-to-roll processing using halogenated (chlorobenzene (CB)) and hydrocarbon solvents (1,2,4-trimethylbenzene (TMB) and ortho-xylene (o-XY)) is used to fabricate photoactive films. Controlled solution and substrate temperatures enable similar aggregation states in the solution and similar kinetics processes during film formation. The optimized blend film nanostructures for different solvents in the highly efficient PM6:Y6 blend is adopted to show a similar morphology, which results in device efficiencies of 15.2%, 15.4%, and 15.6% for CB, TMB, and o-XY solvents. This approach is successfully extended to other donor-acceptor combinations to demonstrate the excellent universality of this method. The results combine a method to optimize the aggregation state and film formation kinetics with the fabrication of OSCs with environmentally friendly solvents by slot-die coating, which is a critical finding for the future development of OSCs in terms of their scalable production and high-performance.

In Situ Growth of All-Inorganic Perovskite Single Crystal Arrays on Electron Transport Layer.

Directly growing perovskite single crystals on charge carrier transport layers will unravel a promising route for the development of emerging optoelectronic devices. Herein, in situ growth of high-quality all-inorganic perovskite (CsPbBr3) single crystal arrays (PeSCAs) on cubic zinc oxide (c-ZnO) is reported, which is used as an inorganic electron transport layer in optoelectronic devices, via a facile spin-coating method. The PeSCAs consist of rectangular thin microplatelets of 6-10 µm in length and 2-3 µm in width. The deposited c-ZnO enables the formation of phase-pure and highly crystallized cubic perovskites via an epitaxial lattice coherence of (100)CsPbBr3∥(100)c-ZnO, which is further confirmed by grazing incidence wide-angle X-ray scattering. The PeSCAs demonstrate a significant structural stability of 26 days with a 9 days excellent photoluminescence stability in ambient environment, which is much superior to the perovskite nanocrystals (PeNCs). The high crystallinity of the PeSCAs allows for a lower density of trap states, longer carrier lifetimes, and narrower energetic disorder for excitons, which leads to a faster diffusion rate than PeNCs. These results unravel the possibility of creating the interface toward c-ZnO heterogeneous layer, which is a major step for the realization of a better integration of perovskites and charge carrier transport layers.