Establishment of a Magnetically Controlled Scalable Nerve Injury Model.

Animal models of peripheral nerve injury (PNI) serve as the fundamental basis for the investigations of nerve injury, regeneration, and neuropathic pain. The injury properties of such models, including the intensity and duration, significantly influence the subsequent pathological changes, pain development, and therapeutic efficacy. However, precise control over the intensity and duration of nerve injury remains challenging within existing animal models, thereby impeding accurate and comparative assessments of relevant cases. Here, a new model that provides quantitative and off-body controllable injury properties via a magnetically controlled clamp, is presented. The clamp can be implanted onto the rat sciatic nerve and exert varying degrees of compression under the control of an external magnetic field. It is demonstrated that this model can accurately simulate various degrees of pathology of human patients by adjusting the magnetic control and reveal specific pathological changes resulting from intensity heterogeneity that are challenging to detect previously. The controllability and quantifiability of this model may significantly reduce the uncertainty of central response and inter-experimenter variability, facilitating precise investigations into nerve injury, regeneration, and pain mechanisms.

Asymmetric Atomic Dual-Sites for Photocatalytic CO2 Reduction.

Atomically dispersed active sites in a photocatalyst offer unique advantages such as locally tuned electronic structures, quantum size effects, and maximum utilization of atomic species. Among these, asymmetric atomic dual-sites are of particular interest because their asymmetric charge distribution generates a local built-in electric potential to enhance charge separation and transfer. Moreover, the dual sites provide flexibility for tuning complex multielectron and multireaction pathways, such as CO2 reduction reactions. The coordination of dual sites opens new possibilities for engineering the structure-activity-selectivity relationship. This comprehensive overview discusses efficient and sustainable photocatalysis processes in photocatalytic CO2 reduction, focusing on strategic active-site design and future challenges. It serves as a timely reference for the design and development of photocatalytic conversion processes, specifically exploring the utilization of asymmetric atomic dual-sites for complex photocatalytic conversion pathways, here exemplified by the conversion of CO2 into valuable chemicals.

In-situ fabrication of self-supported cobalt molybdenum sulphide on carbon paper for bifunctional water electrocatalysis.

The fabrication of highly efficient yet stable noble-metal-free bifunctional electrocatalysts that can simultaneously catalyse both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) remains challenging. Herein, we employ the heterostructure coupling strategy, showcasing an aerosol-assisted chemical vapour deposition (AACVD) aided synthetic approach for the in-situ growth of cobalt molybdenum sulphide nanocomposites on carbon paper (CoMoS@CP) as a bifunctional electrocatalyst. The AACVD allows the rational incorporation of Co in the Mo-S binary structure, which modulates the morphology of CoMoS@CP, resulting in enhanced HER activity (ŋ10 = 171 mV in acidic and ŋ10 = 177 mV in alkaline conditions). Furthermore, the CoS2 species in the CoMoS@CP ternary structure extends the OER capability, yielding an ŋ100 of 455 mV in 1 M KOH. Lastly, we found that the synergistic effect of the Co-Mo-S interface elevates the bifunctional performance beyond binary counterparts, achieving a low cell voltage (1.70 V at 10 mA cm-2) in overall water splitting test and outstanding catalytic stability (∼90 % performance retention after 50-/30-h continuous operation at 10 and 100 mA cm-2, respectively). This work has opened up a new methodology for the controllable synthesis of self-supported transition metal-based electrocatalysts for applications in overall water splitting.

Charge redistribution of a spatially differentiated ferroelectric Bi4Ti3O12 single crystal for photocatalytic overall water splitting.

Artificial photosynthesis is a promising approach to produce clean fuels via renewable solar energy. However, it is practically constrained by two issues of slow photogenerated carrier migration and rapid electron/hole recombination. It is also a challenge to achieve a 2:1 ratio of H2 and O2 for overall water splitting. Here we report a rational design of spatially differentiated two-dimensional Bi4Ti3O12 nanosheets to enhance overall water splitting. Such a spatially differentiated structure overcomes the limitation of charge transfer across different crystal planes in a single crystal semiconductor. The experimental results show a redistribution of charge within a crystal plane. The resulting photocatalyst produces 40.3 µmol h-1 of hydrogen and 20.1 µmol h-1 of oxygen at a near stoichiometric ratio of 2:1 and a solar-to-hydrogen efficiency of 0.1% under simulated solar light.

Sustainable Adipic Acid Production via Paired Electrolysis of Lignin-Derived Phenolic Compounds with Water as Hydrogen and Oxygen Sources.

Adipic acid (AA) is an important feedstock for nylon polymers and is industrially produced from fossil-derived aromatics via thermocatalysis. However, this process consumes explosive H2 and corrosive HNO3 as reductants and oxidants, respectively. Here, we report the direct synthesis of AA from lignin-derived phenolic compounds via paired electrolysis using bimetallic cooperative catalysts. At the cathode, phenol is hydrogenated on PtAu catalysts to form ketone-alcohol (KA) oil with 92% yield and 43% Faradaic efficiency (FE). At the anode, KA is electrooxidized into AA on CuCo2O4 catalysts, achieving a maximum of 85% yield and 84% FE. Experimental and theoretical studies reveal that the excellent catalytic activity can be ascribed to the enhanced absorption and activation capability of reactants on the bimetallic cooperative catalysts. A two-electrode flow electrolyzer for AA synthesis realizes a stable electrolysis at 2.5 A for over 200 h as well as 38.5% yield and 70.2% selectivity. This study offers a green and sustainable route for AA synthesis from lignin via paired electrolysis.

Sub-Band Assisted Z-Scheme for Effective Non-Sacrificial H2O2 Photosynthesis.

Photosynthesis of H2O2 from earth-abundant O2 and H2O molecules offers an eco-friendly route for solar-to-chemical conversion. The persistent challenge is to tune the photo-/thermo- dynamics of a photocatalyst toward efficient electron-hole separation while maintaining an effective driving force for charge transfer. Such a case is achieved here by way of a synergetic strategy of sub-band-assisted Z-Scheme for effective H2O2 photosynthesis via direct O2 reduction and H2O oxidation without a sacrificial agent. The optimized SnS2/g-C3N4 heterojunction shows a high reactivity of 623.0 µmol g-1 h-1 for H2O2 production under visible-light irradiation (λ > 400 nm) in pure water, ≈6 times higher than pristine g-C3N4 (100.5 µmol g-1 h-1). Photodynamic characterizations and theoretical calculations reveal that the enhanced photoactivity is due to a markedly promoted lifetime of trapped active electrons (204.9 ps in the sub-band and >2.0 ns in a shallow band) and highly improved O2 activation, as a result of the formation of a suitable sub-band and catalytic sites along with a low Gibbs-free energy for charge transfer. Moreover, the Z-Scheme heterojunction creates and sustains a large driving force for O2 and H2O conversion to high value-added H2O2.

Hydrogen-Bond-Enhanced Photoreforming of Biomass Furans over a Urea-Incorporated Cu(II) Porphyrin Framework.

Solar-driven upgrading of biomass-derived 5-hydroxylmethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) holds great promise for sustainable production of bio-plastics and resins. However, the process is limited by poor selectivity and sluggish kinetics due to the vertical coordination of HMF at relatively strong metal sites. Here, we purposely developed a Cu(II) porphyrin framework featuring side-chain incorporated urea linkages, denoted as TBUPP-Cu MOF, to render HMF a weak hydrogen bond at the urea site and flat adsorption via π-π stacking with the benzene moiety. The unique configuration promotes the approaching of -CHO of HMF to the photoexcited porphyrin ring towards kinetically and thermodynamically favourable intermediate formation and subsequent desorption. The charge localisation and orbital energy alignment enable the selective activation of O2 over the porphyrin to generate ⋅O2 - and 1O2 instead of highly oxidative H2O2 and ⋅OH via spin-flip electron transfer, which drive the ambient oxidation of proximal -CHO. The effective utilisation of redox species and circumvented over-oxidation facilitate a FDCA selectivity of >90 % with a high turnover number of 193 molHMF molCu -1. The facile purification of high-purity FDCA and zero-waste recycling of intermediates and durable catalyst feature TBUPP-Cu MOF a promising photo-oxidation platform towards net-zero biorefining and organic transformations.

Mechanochemical reduction of clay minerals to porous silicon nanoflakes for high-performance lithium-ion battery anodes.

Hierarchically porous silicon nanoflakes were synthesized from natural talc via a mechanochemical reduction method, which showed great potential in the scalable production of silicon nanoflakes due to the abundant precursor and facile strategy. The unique layered structure and chemical composition of talc enabled the formation of two-dimensional nanostructured silicon without any additional templates. As lithium-ion battery anodes, the silicon nanoflakes showed excellent electrochemical properties.

High-Valence Oxides for High Performance Oxygen Evolution Electrocatalysis.

Valence tuning of transition metal oxides is an effective approach to design high-performance catalysts, particularly for the oxygen evolution reaction (OER) that underpins solar/electric water splitting and metal-air batteries. Recently, high-valence oxides (HVOs) are reported to show superior OER performance, in association with the fundamental dynamics of charge transfer and the evolution of the intermediates. Particularly considered are the adsorbate evolution mechanism (AEM) and the lattice oxygen-mediated mechanism (LOM). High-valence states enhance the OER performance mainly by optimizing the eg -orbital filling, promoting the charge transfer between the metal d band and oxygen p band. Moreover, HVOs usually show an elevated O 2p band, which triggers the lattice oxygen as the redox center and enacts the efficient LOM pathway to break the "scaling" limitation of AEM. In addition, oxygen vacancies, induced by the overall charge-neutrality, also promote the direct oxygen coupling in LOM. However, the synthesis of HVOs suffers from relatively large thermodynamic barrier, which makes their preparation difficult. Hence, the synthesis strategies of the HVOs are discussed to guide further design of the HVO electrocatalysts. Finally, further challenges and perspectives are outlined for potential applications in energy conversion and storage.

Nearly 100% selective and visible-light-driven methane conversion to formaldehyde via. single-atom Cu and Wδ.

Direct solar-driven methane (CH4) reforming is highly desirable but challenging, particularly to achieve a value-added product with high selectivity. Here, we identify a synergistic ensemble effect of atomically dispersed copper (Cu) species and partially reduced tungsten (Wδ+), stabilised over an oxygen-vacancy-rich WO3, which enables exceptional photocatalytic CH4 conversion to formaldehyde (HCHO) under visible light, leading to nearly 100% selectivity, a very high yield of 4979.0 µmol·g-1 within 2 h, and the normalised mass activity of 8.5 × 106 µmol·g-1Cu·h-1 of HCHO at ambient temperature. In-situ EPR and XPS analyses indicate that the Cu species serve as the electron acceptor, promoting the photo-induced electron transfer from the conduction band to O2, generating reactive •OOH radicals. In parallel, the adjacent Wδ+ species act as the hole acceptor and the preferred adsorption and activation site of H2O to produce hydroxyl radicals (•OH), and thus activate CH4 to methyl radicals (•CH3). The synergy of the adjacent dual active sites boosts the overall efficiency and selectivity of the conversion process.

Selective saccharification of crude glycerol pretreated sugarcane bagasse via fast pyrolysis: Reaction kinetics and life cycle assessment.

Saccharification is a pivotal step in the conversion of lignocellulose to biofuels and chemicals. In this study, crude glycerol derived from biodiesel production was used in pretreatment to facilitate efficient and clean pyrolytic saccharification of sugarcane bagasse. Delignification, demineralization, destruction of lignin-carbohydrate complex structure, and cellulose crystallinity improvement in crude glycerol pretreated biomass could enhance levoglucosan producing reactions against competitive reactions, and therefore facilitate a kinetically controlled pyrolysis with apparent activation energy increased by 2-fold. Accordingly, selective levoglucosan production (44.4%) was promoted by 6-fold whilst light oxygenates and lignin monomers were limited to <25% in bio-oil. Owing to the high-efficiency saccharification, life cycle assessment suggested that the environmental impacts of the integrated process were less than those of typical acid pretreatment and petroleum-based processes, especially on the acidification (8-fold less) and global warming potential. This study provides an environmentally benign approach to efficient biorefinery and waste management.

Mechanical Interlocking Enhances the Electrocatalytic Oxygen Reduction Activity and Selectivity of Molecular Copper Complexes.

Efficient O2 reduction reaction (ORR) for selective H2O generation enables advanced fuel cell technology. Nonprecious metal catalysts are viable and attractive alternatives to state-of-the-art Pt-based materials that are expensive. Cu complexes inspired by Cu-containing O2 reduction enzymes in nature are yet to reach their desired ORR catalytic performance. Here, the concept of mechanical interlocking is introduced to the ligand architecture to enforce dynamic spatial restriction on the Cu coordination site. Interlocked catenane ligands could govern O2 binding mode, promote electron transfer, and facilitate product elimination. Our results show that ligand interlocking as a catenane steers the ORR selectivity to H2O as the major product via the 4e- pathway, rivaling the selectivity of Pt, and boosts the onset potential by 130 mV, the mass activity by 1.8 times, and the turnover frequency by 1.5 fold as compared to the noninterlocked counterpart. Our Cu catenane complex represents one of the first examples to take advantage of mechanical interlocking to afford electrocatalysts with enhanced activity and selectivity. The mechanistic insights gained through this integrated experimental and theoretical study are envisioned to be valuable not just to the area of ORR energy catalysis but also with broad implications on interlocked metal complexes that are of critical importance to the general fields in redox reactions involving proton-coupled electron transfer steps.

Concerted and Selective Electrooxidation of Polyethylene-Terephthalate-Derived Alcohol to Glycolic Acid at an Industry-Level Current Density over a Pd-Ni(OH)2 Catalyst.

Electro-reforming of Polyethylene-terephthalate-derived (PET-derived) ethylene glycol (EG) into fine chemicals and H2 is an ideal solution to address severe plastic pollution. Here, we report the electrooxidation of EG to glycolic acid (GA) with a high Faraday efficiency and selectivity (>85 %) even at an industry-level current density (600 mA cm-2 at 1.15 V vs. RHE) over a Pd-Ni(OH)2 catalyst. Notably, stable electrolysis over 200 h can be achieved, outperforming all available Pd-based catalysts. Combined experimental and theoretical results reveal that 1) the OH* generation promoted by Ni(OH)2 plays a critical role in facilitating EG-to-GA oxidation and removing poisonous carbonyl species, thereby achieving high activity and stability; 2) Pd with a downshifted d-band center and the oxophilic Ni can synergistically facilitate the rapid desorption and transfer of GA from the active Pd sites to the inactive Ni sites, avoiding over-oxidation and thus achieving high selectivity.

Direct 3D Printing of Binder-Free Bimetallic Nanomaterials as Integrated Electrodes for Glycerol Oxidation with High Selectivity for Valuable C3 Products.

Net-zero carbon strategies and green synthesis methodologies are key to realizing the United Nations' sustainable development goals (SDGs) on a global scale. An electrocatalytic glycerol oxidation reaction (GOR) holds the promise of upcycling excess glycerol from biodiesel production directly into precious hydrocarbon commodities that are worth orders of magnitude more than the glycerol feedstock. Despite years of research on the GOR, the synthesis process of nanoscale electrocatalysts still involves (1) prohibitive heat input, (2) expensive vacuum chambers, and (3) emission of toxic liquid pollutants. In this paper, these knowledge gaps are closed via developing a laser-assisted nanomaterial preparation (LANP) process to fabricate bimetallic nanocatalysts (1) at room temperature, (2) under an ambient atmosphere, and (3) without liquid waste emission. Specifically, PdCu nanoparticles with adjustable Pd:Cu content supported on few-layer graphene can be prepared using this one-step LANP method with performance that can rival state-of-the-art GOR catalysts. Beyond exhibiting high GOR activity, the LANP-fabricated PdCu/C nanomaterials with an optimized Pd:Cu ratio further deliver an exclusive product selectivity of up to 99% for partially oxidized C3 products with value over 280000-folds that of glycerol. Through DFT calculations and in situ XAS experiments, the synergy between Pd and Cu is found to be responsible for the stability under GOR conditions and preference for C3 products of LANP PdCu. This dry LANP method is envisioned to afford sustainable production of multimetallic nanoparticles in a continuous fashion as efficient electrocatalysts for other redox reactions with intricate proton-coupled electron transfer steps that are central to the widespread deployment of renewable energy schemes and carbon-neutral technologies.

Revealing the key role of structural cross-link between lignin and polysaccharides during fast pyrolysis of lignocellulose.

Lignin-carbohydrate complex (LCC) is the native existing form of major components in lignocellulose. In this study, the structural cross-link between lignin and polysaccharides in lignocellulose was quantitatively estimated with carboxymethylation-separation (CM-Sep) method, and its influence on lignocellulose pyrolysis was systematically investigated. The cross-linked lignin was found to positively correlate with the production of small molecules and furan derivatives while negatively affecting the generation of anhydrous sugars. Content of small molecules was increased by 97% while that of anhydrous sugars was decreased by 47% in pyrolytic products with levoglucosan yield lowered by 54 wt% in the existence of cross-linked lignin. Furthermore, the impact of cross-linked lignin was revealed to be significantly distinguished from free lignin. Impeded glycosidic end formation and boosted glycosyl ring scission as well as lignin fragmentation were responsible for the distinction. Excellent correlations between structural cross-link and lignocellulose pyrolytome could facilitate product prediction and process design.

Indirect to Direct Charge Transfer Transition in Plasmon-Enabled CO2 Photoreduction.

Understanding hot carrier dynamics between plasmonic nanomaterials and its adsorbate is of great importance for plasmon-enhanced photoelectronic processes such as photocatalysis, optical sensing and spectroscopic analysis. However, it is often challenging to identify specific dominant mechanisms for a given process because of the complex pathways and ultrafast interactive dynamics of the photoelectrons. Here, using CO2 reduction as an example, the underlying mechanisms of plasmon-driven catalysis at the single-molecule level using time-dependent density functional theory calculations is clearly probed. The CO2 molecule adsorbed on two typical nanoclusters, Ag20 and Ag147 , is photoreduced by optically excited plasmon, accompanied by the excitation of asymmetric stretching and bending modes of CO2 . A nonlinear relationship has been identified between laser intensity and reaction rate, demonstrating a synergic interplay and transition from indirect hot-electron transfer to direct charge transfer, enacted by strong localized surface plasmons. These findings offer new insights for CO2 photoreduction and for the design of effective pathways toward highly efficient plasmon-mediated photocatalysis.

Rational Design of Pt-Pd-Ni Trimetallic Nanocatalysts for Room-Temperature Benzaldehyde and Styrene Hydrogenation.

Nanostructures of the multimetallic catalysts offer great scope for fine tuning of heterogeneous catalysis, but clear understanding of the surface chemistry and structures is important to enhance their selectivity and efficiency. Focussing on a typical Pt-Pd-Ni trimetallic system, we comparatively examined the Ni/C, Pt/Ni/C, Pd/Ni/C and Pt-Pd/Ni/C catalysts synthesized by impregnation and galvanic replacement reaction. To clarify surface chemical/structural effect, the Pt-Pd/Ni/C catalyst was thermally treated at X=200, 400 or 600 °C in a H2 reducing atmosphere, respectively termed as Pt-Pd/Ni/C-X. The as-prepared catalysts were characterized complementarily by XRD, XPS, TEM, HRTEM, HS-LEIS and STEM-EDS elemental mapping and line-scanning. All the catalysts were comparatively evaluated for benzaldehyde and styrene hydrogenation. It is shown that the "PtPd alloy nanoclusters on Ni nanoparticles" (PtPd/Ni) and the synergistic effect of the trimetallic Pt-Pd-Ni, lead to much improved catalytic performance, compared with the mono- or bi- metallic counterparts. However, with the increase of the treatment temperature of the Pt-Pd/Ni/C, the catalytic performance was gradually degraded, which was likely due to that the favourable nanostructure of fine "PtPd/Ni" was gradually transformed to relatively large "PtPdNi alloy on Ni" (PtPdNi/Ni) particles, thus decreasing the number of noble metal (Pt and Pd) active sites on the surface of the catalyst. The optimum trimetallic structure is thus the as synthesised Pt-Pd/Ni/C. This work provides a novel strategy for the design and development of highly efficient and low-cost multimetallic catalysts, e. g. for hydrogenation reactions.

Ferrocene-Based Metal-Organic Framework Nanosheets as a Robust Oxygen Evolution Catalyst.

We report the synthesis of two-dimensional metal-organic frameworks (MOFs) on nickel foam (NF) by assembling nickel chloride hexahydrate and 1,1'-ferrocenedicarboxylic acid (NiFc-MOF/NF). The NiFc-MOF/NF exhibits superior oxygen evolution reaction (OER) performance with an overpotential of 195 mV and 241 mV at 10 and 100 mA cm-2 , respectively under alkaline conditions. Electrochemical results demonstrate that the superb OER performance originates from the ferrocene units that serve as efficient electron transfer intermediates. Density functional theory calculations reveal that the ferrocene units within the MOF crystalline structure enhance the overall electron transfer capacity, thereby leading to a theoretical overpotential of 0.52 eV, which is lower than that (0.81 eV) of the state-of-the-art NiFe double hydroxides.

A Metal-Free Oxygenated Covalent Triazine 2-D Photocatalyst Works Effectively from the Ultraviolet to Near-Infrared Spectrum for Water Oxidation Apart from Water Reduction.

Solar-driven water splitting is highly desirable for hydrogen fuel production, particularly if water oxidation is effectively sustained in a complete cycle and/or by means of stable and efficient photocatalysts of main group elements, for example, carbon and nitrogen. Despite extensive success on H2 production on polymer photocatalysts, polymers have met with very limited success for the rate-determining step of the water splitting-water oxidation reaction due to the extremely slow "four-hole" chemistry. Here, the synthesized metal-free oxygenated covalent triazine (OCT) is remarkably active for oxygen production in a wide operation window from UV to visible and even to NIR (up to 800 nm), neatly matching the solar spectrum with an unprecedented external quantum efficiency (even 1% at 600 nm) apart from excellent activity for H2 production under full arc irradiation, a big step moving toward full solar spectrum water splitting. Experimental results and DFT calculations show that the oxygen incorporation not only narrows the band gap but also causes appropriate band-edge shifts. In the end, a controlled small amount of oxygen in the ionothermal reaction is found to be a promising and facile way of achieving such oxygen incorporation. This discovery is a significant step toward both scientific understanding and practical development of metal-free photocatalysts for cost-effective water oxidation and hydrogen generation over a large spectral window.

Unique hole-accepting carbon-dots promoting selective carbon dioxide reduction nearly 100% to methanol by pure water.

Solar-driven CO2 reduction by abundant water to alcohols can supply sustainable liquid fuels and alleviate global warming. However, the sluggish water oxidation reaction has been hardly reported to be efficient and selective in CO2 conversion due to fast charge recombination. Here, using transient absorption spectroscopy, we demonstrate that microwave-synthesised carbon-dots (mCD) possess unique hole-accepting nature, prolonging the electron lifetime (t50%) of carbon nitride (CN) by six folds, favouring a six-electron product. mCD-decorated CN stably produces stoichiometric oxygen and methanol from water and CO2 with nearly 100% selectivity to methanol and internal quantum efficiency of 2.1% in the visible region, further confirmed by isotopic labelling. Such mCD rapidly extracts holes from CN and prevents the surface adsorption of methanol, favourably oxidising water over methanol and enhancing the selective CO2 reduction to alcohols. This work provides a unique strategy for efficient and highly selective CO2 reduction by water to high-value chemicals.