Fractionation and Extraction Optimization of Potentially Valuable Compounds and Their Profiling in Six Varieties of Two Nicotiana Species.

There is an increasingly urgent call to shift industrial processes from fossil fuel feedstock to sustainable bio-based resources. This change becomes of high importance considering new budget requirements for a carbon-neutral economy. Such a transformation can be driven by traditionally used plants that are able to produce large amounts of valuable biologically relevant secondary metabolites. Tobacco plants can play a leading role in providing value-added products in remote areas of the world. In this study, we propose a non-exhaustive list of compounds with potential economic interest that can be sourced from the tobacco plant. In order to optimize extraction methodologies, we first analyzed their physico-chemical properties using rapid solubility tests and high-resolution microfractionation techniques. Next, to identify an optimal extraction for a selected list of compounds, we compared 13 different extraction method-solvent combinations. We proceeded with profiling some of these compounds in a total of six varieties from Nicotiana tabacum and Nicotiana rustica species, identifying the optimal variety for each. The estimated expected yields for each of these compounds demonstrate that tobacco plants can be a superior source of valuable compounds with diverse applications beyond nicotine. Among the most interesting results, we found high variability of anatabine content between species and varieties, ranging from 287 to 1699 µg/g. In addition, we found that CGA (1305 µg/g) and rutin (7910 µg/g) content are orders of magnitude lower in the Burley variety as compared to all others.

Application of Secondary Electrospray Ionization Coupled with High-Resolution Mass Spectrometry in Chemical Characterization of Thermally Generated Aerosols.

Inhalation as a route for administering drugs and dietary supplements has garnered significant attention over the past decade. We performed real-time analyses of aerosols using secondary electrospray ionization (SESI) technology interfaced with high-resolution mass spectrometry (HRMS), primarily developed for exhaled breath analysis with the goal to detect the main aerosol constituents. Several commercially available inhalation devices containing caffeine, melatonin, cannabidiol, and vitamin B12 were tested. Chemical characterization of the aerosols produced by these devices enabled detection of the main constituents and screening for potential contaminants, byproducts, and impurities in the aerosol. In addition, a programmable syringe pump was connected to the SESI-HRMS system to monitor aerosolized active pharmaceutical ingredients (APIs) such as chloroquine, hydroxychloroquine, and azithromycin. This setup allowed us to detect caffeine, melatonin, hydroxychloroquine, chloroquine, and cannabidiol in the produced aerosols. Azithromycin and vitamin B12 in the aerosols could not be detected; however, our instrument setup enabled the detection of vitamin B12 breakdown products that were generated during the aerosolization process. Positive control was realized by liquid chromatography-HRMS analyses. The compounds detected in the aerosol were confirmed by exact mass measurements of the protonated and/or deprotonated species, as well as their respective collision-induced dissociation tandem mass spectra. These results reveal the potential wide application of this technology for the real-time monitoring of aerosolized active pharmaceutical ingredients that can be administered through the inhalation route.

Pulmonary Delivery of Aerosolized Chloroquine and Hydroxychloroquine to Treat COVID-19: In Vitro Experimentation to Human Dosing Predictions.

In vitro screening for pharmacological activity of existing drugs showed chloroquine and hydroxychloroquine to be effective against severe acute respiratory syndrome coronavirus 2. Oral administration of these compounds to obtain desired pulmonary exposures resulted in dose-limiting systemic toxicity in humans. However, pulmonary drug delivery enables direct and rapid administration to obtain higher local tissue concentrations in target tissue. In this work, inhalable formulations for thermal aerosolization of chloroquine and hydroxychloroquine were developed, and their physicochemical properties were characterized. Thermal aerosolization of 40 mg/mL chloroquine and 100 mg/mL hydroxychloroquine formulations delivered respirable aerosol particle sizes with 0.15 and 0.33 mg per 55 mL puff, respectively. In vitro toxicity was evaluated by exposing primary human bronchial epithelial cells to aerosol generated from Vitrocell. An in vitro exposure to 7.24 µg of chloroquine or 7.99 µg hydroxychloroquine showed no significant changes in cilia beating, transepithelial electrical resistance, and cell viability. The pharmacokinetics of inhaled aerosols was predicted by developing a physiologically based pharmacokinetic model that included a detailed species-specific respiratory tract physiology and lysosomal trapping. Based on the model predictions, inhaling emitted doses comprising 1.5 mg of chloroquine or 3.3 mg hydroxychloroquine three times a day may yield therapeutically effective concentrations in the lung. Inhalation of higher doses further increased effective concentrations in the lung while maintaining lower systemic concentrations. Given the theoretically favorable risk/benefit ratio, the clinical significance for pulmonary delivery of aerosolized chloroquine and hydroxychloroquine to treat COVID-19 needs to be established in rigorous safety and efficacy studies. Graphical abstract.

A Literature Review and Framework Proposal for Halitosis Assessment in Cigarette Smokers and Alternative Nicotine-Delivery Products Users.

Halitosis is a health condition which counts cigarette smoking (CS) among its major risk factors. Cigarette smoke can cause an imbalance in the oral bacterial community, leading to several oral diseases and conditions, including intraoral halitosis. Although the best approach to decrease smoking-related health risks is quitting smoking, this is not feasible for many smokers. Switching to potentially reduced-risk products, like electronic vapor products (EVP) or heated tobacco products (HTP), may help improve the conditions associated with CS. To date, there have been few systematic studies on the effects of CS on halitosis and none have assessed the effects of EVP and HTP use. Self-assessment studies have shown large limitations owing to the lack of reliability in the participants' judgment. This has compelled the scientific community to develop a strategy for meaningful assessment of these new products in comparison with cigarettes. Here, we compiled a review of the existing literature on CS and halitosis and propose a 3-layer approach that combines the use of the most advanced breath analysis techniques and multi-omics analysis to define the interactions between oral bacterial species and their role in halitosis both in vitro and in vivo. Such an approach will allow us to compare the effects of different nicotine-delivery products on oral bacteria and quantify their impact on halitosis. Defining the impact of alternative nicotine-delivery products on intraoral halitosis and its associated bacteria will help the scientific community advance a step further toward understanding the safety of these products and their potentiall risks for consumers.

Analysis of chemical deposits on tooth enamel exposed to total particulate matter from cigarette smoke and tobacco heating system 2.2 aerosol by novel GC-MS deconvolution procedures.

Tobacco smoking contributes to tooth discoloration. Pigmented compounds in the smoke generated by combustion of tobacco can cause discoloration of dental hard tissues. However, aerosols from heated tobacco products cause less discoloration than cigarette smoke (CS) in vitro. The objective of the present study was to optimize a method for extracting the colored chemical compounds deposited on tooth enamel following exposure to total particulate matter (TPM) from CS or a heated tobacco product (Tobacco Heating System [THS] 2.2), analyze the extracts by gas chromatography coupled to time-of-flight mass spectrometry, and identify the key chemicals associated with tooth discoloration. Sixty bovine enamel blocks were exposed for 2 weeks to TPM from CS or THS 2.2 aerosol or to artificial saliva as a control. Brushing without toothpaste and color measurements were performed each week. Noticeable discoloration of enamel was observed following exposure to CS TPM. The discoloration following exposure to THS 2.2 aerosol TPM or artificial saliva was not distinguishable to the eye (ΔE < 3.3). Carbon disulfide was used to extract surface-deposited chemicals. Untargeted analyses were followed by partial least squares correlation against discoloration scores (R2 = 0.96). Eleven compounds had variable importance in projection scores greater than 2. Discriminant autocorrelation matrix calculation of their mass spectral information identified eight of the eleven compounds as terpenoids. None of the compounds were related to nicotine. Several of these compounds were also detected in THS 2.2 aerosol TPM-exposed enamel, but at lower levels, in line with our findings showing less discoloration. Compared with CS TPM exposure, THS 2.2 aerosol TPM exposure resulted in lower deposition of color-related compounds on enamel surface, consistent with minimal discoloration of dental enamel.

Prediction Models of Retention Indices for Increased Confidence in Structural Elucidation during Complex Matrix Analysis: Application to Gas Chromatography Coupled with High-Resolution Mass Spectrometry.

Monitoring of volatile and semivolatile compounds was performed using gas chromatography (GC) coupled to high-resolution electron ionization mass spectrometry, using both headspace and liquid injection modes. A total of 560 reference compounds, including 8 odd n-alkanes, were analyzed and experimental linear retention indices (LRI) were determined. These reference compounds were randomly split into training (n = 401) and test (n = 151) sets. LRI for all 552 reference compounds were also calculated based upon computational Quantitative Structure-Property Relationship (QSPR) models, using two independent approaches RapidMiner (coupled to Dragon) and ACD/ChromGenius software. Correlation coefficients for experimental versus predicted LRI values calculated for both training and test set compounds were calculated at 0.966 and 0.949 for RapidMiner and at 0.977 and 0.976 for ACD/ChromGenius, respectively. In addition, the cross-validation correlation was calculated at 0.96 from RapidMiner and the residual standard error value obtained from ACD/ChromGenius was 53.635. These models were then used to predict LRI values for several thousand compounds reported present in tobacco and tobacco-related fractions, plus a range of specific flavor compounds. It was demonstrated that using the mean of the LRI values predicted by RapidMiner and ACD/ChromGenius, in combination with accurate mass data, could enhance the confidence level for compound identification from the analysis of complex matrixes, particularly when the two predicted LRI values for a compound were in close agreement. Application of this LRI modeling approach to matrixes with unknown composition has already enabled the confirmation of 23 postulated compounds, demonstrating its ability to facilitate compound identification in an analytical workflow. The goal is to reduce the list of putative candidates to a reasonable relevant number that can be obtained and measured for confirmation.

Characterization of the Vitrocell® 24/48 in vitro aerosol exposure system using mainstream cigarette smoke.

BACKGROUND: Only a few exposure systems are presently available that enable cigarette smoke exposure of living cells at the air-liquid interface, of which one of the most versatile is the Vitrocell® system (Vitrocell® Systems GmbH). To assess its performance and optimize the exposure conditions, we characterized a Vitrocell® 24/48 system connected to a 30-port carousel smoking machine. The Vitrocell® 24/48 system allows for simultaneous exposure of 48 cell culture inserts using dilution airflow rates of 0-3.0 L/min and exposes six inserts per dilution. These flow rates represent cigarette smoke concentrations of 7-100%. RESULTS: By characterizing the exposure inside the Vitrocell® 24/48, we verified that (I) the cigarette smoke aerosol distribution is uniform across all inserts, (II) the utility of Vitrocell® crystal quartz microbalances for determining the online deposition of particle mass on the inserts, and (III) the amount of particles deposited per surface area and the amounts of trapped carbonyls and nicotine were concentration dependent. At a fixed dilution airflow of 0.5 L/min, the results showed a coefficient of variation of 12.2% between inserts of the Vitrocell® 24/48 module, excluding variations caused by different runs. Although nicotine and carbonyl concentrations were linear over the tested dilution range, particle mass deposition increased nonlinearly. The observed effect on cell viability was well-correlated with increasing concentration of cigarette smoke. CONCLUSIONS: Overall, the obtained results highlight the suitability of the Vitrocell® 24/48 system to assess the effect of cigarette smoke on cells under air-liquid interface exposure conditions, which is closely related to the conditions occurring in human airways.

Dose-response plasma appearance of green tea catechins in adults.

SCOPE: Tea is an infusion of the Camellia sinensis leaves. The most prevalent bioactive compounds in green tea are catechins (C), which are of great interest for their potential health-promoting effects. However, metabolism and bioavailability of C are not fully understood. METHODS AND RESULTS: This study investigates the human bioavailability (plasma appearance) of C after drinking three doses of infused green tea in a randomized cross-over design. The sum of area under the curve increased between the small (0.75% w/v, 180 mg total C) and medium (1.25%) dose of ingested green tea but not between the medium and the high (1.75%) dose. The overall pattern for the sum of C did not reflect the fate of individual C. While (-)-epigallocatechin and 4'-O-Me-epigallocatechin showed saturation in plasma between the medium and high green tea doses, (-)-epigallocatechin gallate and (-)-epicatechin did not "saturate" and increased proportionally with the ingested dose. Regardless of the dose, C appeared rapidly in plasma as monophasic curves, suggesting absorption in the small intestine and minimal entero-hepatic circulation. CONCLUSION: As a conclusion, when studying dose response of polyphenols and metabolites, one must look not only at the overall pattern of plasma appearance, but also at data specific for each metabolite.

A whole-grain-rich diet reduces urinary excretion of markers of protein catabolism and gut microbiota metabolism in healthy men after one week.

Epidemiological studies consistently find that diets rich in whole-grain (WG) cereals lead to decreased risk of disease compared with refined grain (RG)-based diets. Aside from a greater amount of fiber and micronutrients, possible mechanisms for why WGs may be beneficial for health remain speculative. In an exploratory, randomized, researcher-blinded, crossover trial, we measured metabolic profile differences between healthy participants eating a diet based on WGs compared with a diet based on RGs. Seventeen healthy adult participants (11 female, 6 male) consumed a controlled diet based on either WG-rich or RG-rich foods for 2 wk, followed by the other diet after a 5-wk washout period. Both diets were the same except for the use of WG (150 g/d) or RG foods. The metabolic profiles of plasma, urine, and fecal water were measured using (1)H-nuclear magnetic resonance spectroscopy and gas chromatography-mass spectrometry (plasma only). After 1 wk of intervention, the WG diet led to decreases in urinary excretion of metabolites related to protein catabolism (urea, methylguanadine), lipid (carnitine and acylcarnitines) and gut microbial (4-hydroxyphenylacetate, trimethylacetate, dimethylacetate) metabolism in men compared with the same time point during the RG intervention. There were no differences between the interventions after 2 wk. Urinary urea, carnitine, and acylcarnitine were lower at wk 1 of the WG intervention relative to the RG intervention in all participants. Fecal water short-chain fatty acids acetate and butyrate were relatively greater after the WG diet compared to the RG diet. Although based on a small population and for a short time period, these observations suggest that a WG diet may affect protein metabolism.

A protein-leucine supplement increases branched-chain amino acid and nitrogen turnover but not performance.

PURPOSE: This study aimed to determine the effect of postexercise protein-leucine coingestion with CHO-lipid on subsequent high-intensity endurance performance and to investigate candidate mechanisms using stable isotope methods and metabolomics. METHODS: In this double-blind, randomized, crossover study, 12 male cyclists ingested a leucine/protein/CHO/fat supplement (LEUPRO 7.5/20/89/22 g · h(-1), respectively) or isocaloric CHO/fat control (119/22 g · h(-1)) 1-3 h after exercise during a 6-d training block (intense intervals, recovery, repeated-sprint performance rides). Daily protein intake was clamped at 1.9 g · kg(-1) · d(-1) (LEUPRO) and 1.5 g · kg(-1) · d(-1) (control). Stable isotope infusions (1-(13)C-leucine and 6,6-(2)H2-glucose), mass spectrometry-based metabolomics, and nitrogen balance methods were used to determine the effects of LEUPRO on whole-body branched-chain amino acid (BCAA) and glucose metabolism and protein turnover. RESULTS: After exercise, LEUPRO increased BCAA levels in plasma (2.6-fold; 90% confidence limits = ×/÷ 1.1) and urine (2.8-fold; ×/÷ 1.2) and increased products of BCAA metabolism plasma acylcarnitine C5 (3.0-fold; ×/÷ 0.9) and urinary leucine (3.6-fold; ×/÷ 1.3) and ß-aminoisobutyrate (3.4-fold; ×/÷ 1.4), indicating that ingesting ~10 g leucine per hour during recovery exceeds the capacity to metabolize BCAA. Furthermore, LEUPRO increased leucine oxidation (5.6-fold; ×/÷ 1.1) and nonoxidative disposal (4.8-fold; ×/÷ 1.1) and left leucine balance positive relative to control. With the exception of day 1 (LEUPRO = 17 ± 20 mg N · kg(-1), control = -90 ± 44 mg N · kg(-1)), subsequent (days 2-5) nitrogen balance was positive for both conditions (LEUPRO = 130 ± 110 mg N · kg(-1), control = 111 ± 86 mg N · kg(-1)). Compared with control feeding, LEUPRO lowered the serum creatine kinase concentration by 21%-25% (90% confidence limits = ± 14%), but the effect on sprint power was trivial (day 4 = 0.4% ± 1.0%, day 6 = -0.3% ± 1.0%). CONCLUSIONS: Postexercise protein-leucine supplementation saturates BCAA metabolism and attenuates tissue damage, but effects on subsequent intense endurance performance may be inconsequential under conditions of positive daily nitrogen balance.

Lycopene bioavailability and metabolism in humans: an accelerator mass spectrometry study.

BACKGROUND: To our knowledge, there is no direct information on lycopene metabolism in humans. OBJECTIVE: The objective of this study was to quantify the long-term human bioavailability of lycopene in plasma and skin after a single dose of (14)C-lycopene and to profile the metabolites formed. DESIGN: We preselected 2 male subjects as lycopene absorbers and gave them an oral dose of 10 mg synthetic lycopene combined with ≈6 µg [6,6',7,7'-(14)C]lycopene (≈30,000 Bq; 92% trans lycopene). The appearance of (14)C in plasma, plasma triacylglycerol-rich lipoprotein (TRL) fraction, urine, expired breath carbon dioxide, and skin biopsies was measured over 42 d. The (14)C in lycopene-isomer fractions from plasma and TRL fraction was measured to assess the isomerization of lycopene in vivo. RESULTS: We quantified (14)C from (14)C-lycopene in plasma, the plasma TRL fraction, expired carbon dioxide, urine, and skin. The time to maximum concentration (t(max)) of total (14)C-lycopene in plasma was 6 h, and the elimination half-life (t(1/2)) was 5 d, which were different from the t(max) and t(1/2) of unlabeled lycopene (0.5 and 48 d, respectively). (14)C-Lycopene was extensively isomerized after dosing as a 92% all-trans isomer at dosing but changed to 50% trans, 38% 5 cis, 1% 9 cis, and 11% other cis isomers after 24 h. A similar pattern of isomerization was seen in plasma TRL fractions. CONCLUSIONS: Lycopene was extensively isomerized after dosing and rapidly metabolized into polar metabolites excreted into urine with the rapid peak of (14)CO(2) after dosing, which implies that ß-oxidation was involved in the lycopene metabolism. Lycopene or its metabolites were detected in skin for up to 42 d.

The pivotal role of mass spectrometry in determining the presence of chemical contaminants in food raw materials.

During recent years, a rising interest from consumers and various governmental organizations towards the quality of food has continuously been observed. Human intervention across the different stages of the food supply chain can lead to the presence of several types of chemical contaminants in food-based products. On a normal daily consumption basis, some of these chemicals are not harmful; however, for those that present a risk to consumers, legislation rules were established to specify tolerance levels or in some cases the total forbiddance of these specific contaminants. Hence, the use of appropriate analytical tools is recommended to properly identify chemical contaminants. In that context, mass spectrometry (MS)-based techniques coupled or not to chromatography offer a vast panel of features such as sensitivity, selectivity, quantification at trace levels, and/or structural elucidation. Because of the complexity of food-based matrices, sample preparation is a crucial step before final detection. In the present manuscript, we review the contribution and the potentialities of MS-based techniques to ensure the absence of chemical contaminants in food-based products.

A plasma global metabolic profiling approach applied to an exercise study monitoring the effects of glucose, galactose and fructose drinks during post-exercise recovery.

A global metabolic profiling methodology based on gas chromatography coupled to time-of-flight mass spectrometry (GC-TOFMS) for human plasma was applied to a human exercise study focused on the effects of beverages containing glucose, galactose, or fructose taken after exercise and throughout a recovery period of 6 h and 45 min. One group of 10 well trained male cyclists performed 3 experimental sessions on separate days (randomized, single center). After performing a standardized depletion protocol on a bicycle, subjects consumed one of three different beverages: maltodextrin (MD)+glucose (2:1 ratio), MD+galactose (2:1), and MD+fructose (2:1), consumed at an average of ∼1.25 g of carbohydrate (CHO) ingested per minute. Blood was taken straight after exercise and every 45 min within the recovery phase. With the resulting blood plasma, insulin, free fatty acid (FFA) profile, glucose, and GC-TOFMS global metabolic profiling measurements were performed. The resulting profiling data was able to match the results obtained from the other clinical measurements with the addition of being able to follow many different metabolites throughout the recovery period. The data quality was assessed, with all the labelled internal standards yielding values of <15% CV for all samples (n=335), apart from the labelled sucrose which gave a value of 15.19%. Differences between recovery treatments including the appearance of galactonic acid from the galactose based beverage were also highlighted.

Quantitative measurement of betaine and free choline in plasma, cereals and cereal products by isotope dilution LC-MS/MS.

Betaine and choline are important components of the one-carbon metabolism cycle, linked with the amino acid homocysteine and lipid metabolism. Analyses of broad ranges of foods point to cereal based foods being important sources of betaine and choline, however to date there has been no detailed analysis of these compounds in cereal flours or cereal products. An analytical method based on optimization of an existing extraction followed by LC-MS/MS analysis was used to analyze 47 plasma samples, 32 cereal flours and cereal fractions, and 51 cereal products. For the method validation LLOQ, recovery, inter- and intraday repeatability were all performed. Whole-grain wheat and rye flours, and products based on these were the best whole cereal sources of betaine (747-1508 microg/g) and to a lesser extent choline (76-159 microg/g), while the bran fraction contained the highest concentrations of betaine and free-choline (2350-2899 microg/g and 366-384 microg/g respectively). Refined wheat flour and products contained lower concentrations, while rice and maize contained only very low and no detectable amounts of betaine respectively (0-10 microg/g), and low amounts of free-choline (<31 microg/g). These results were mirrored in cereal products analyzed, with whole-grain wheat or rye-based cereal products having the highest concentrations of the two metabolites. Plasma concentrations for betaine and free-choline in a group of 47 subjects ranged from 15.2-66.3 and 9.8-18.5 micromol/L respectively, within the range of previous reports. This LC-MS/MS method can be used to rapidly and sensitively quantify betaine and free-choline in plasma and cereal products. Whole-grain cereal products and products containing cereal bran appear to be excellent dietary sources of betaine and free-choline.

Measurement of caffeic and ferulic acid equivalents in plasma after coffee consumption: small intestine and colon are key sites for coffee metabolism.

Previous studies on coffee examined absorption of phenolic acids (PA) in the small intestine, but not the contribution of the colon to absorption. Nine healthy volunteers ingested instant soluble coffee ( approximately 335 mg total chlorogenic acids (CGAs)) in water. Blood samples were taken over 12 h, and at 24 h to assess return to baseline. Many previous studies, which used glucuronidase and sulfatase, measured only PA and did not rigorously assess CGAs. To improve this, plasma samples were analyzed after full hydrolysis by chlorogenate esterase, glucuronidase and sulfatase to release aglycone equivalents of PA followed by liquid-liquid extraction and ESI-LC-ESI-MS/MS detection. Ferulic, caffeic and isoferulic acid equivalents appeared rapidly in plasma, peaking at 1-2 h. Dihydrocaffeic and dihydroferulic acids appeared in plasma 6-8 h after ingestion (T(max=)8-12 h). Substantial variability in maximum plasma concentration and T(max) was also observed between individuals. This study confirms that the small intestine is a significant site for absorption of PA, but shows for the first time that the colon/microflora play the major role in absorption and metabolism of CGAs and PA from coffee.

Quantitative analysis of plasma caffeic and ferulic acid equivalents by liquid chromatography tandem mass spectrometry.

A validated method was developed for the simultaneous determination of the hydroxycinnamates caffeic acid (CA), dihydrocaffeic acid (DHCA), ferulic acid (FA), dihydroferulic acid (DHFA), and isoferulic acid (IFA) in human plasma as metabolites derived from coffee consumption. The method includes a protein precipitation step prior to enzymatic hydrolysis of the conjugated metabolites (sulfate, glucuronide, and/or ester) back to their aglycone forms. After liquid-liquid extraction, the reconstituted extract was analysed by high-performance liquid chromatography coupled to negative electrospray ionisation tandem mass spectrometry. Calibration curves were constructed from spiked human plasma samples in the range of 0-4800 nM for each of the targeted analytes. Two internal standards, 3-(4-hydroxyphenyl)-propionic acid (500 nM) and 1,3-dicaffeoylquinic acid (200 nM), were spiked at the beginning of the sample preparation and before analysis, respectively. Good performance data were obtained with limits of detection and quantification of the five hydroxycinnamates ranging between 1-15 nM and 3-50 nM, respectively. Within and between-days precisions were respectively calculated between 8-18% and 8-30% (at 50 nM added initially), between 6-9% and 6-12% (at 200 nM), and between 5-9% and 5-9% (at 500 nM). Precision calculated from different analysts ranged from 18% to 44% (at 50 nM), from 8% to 16% (at 200 nM), and from 4% to 8% (at 500 nM). Using this method, we determined plasma levels in humans and measured the efficiency of deconjugation using our enzymatic cocktail.

Investigation of human blood plasma sample preparation for performing metabolomics using ultrahigh performance liquid chromatography/mass spectrometry.

The following study investigates the preparation of human blood plasma for metabolomic profiling analysis by ultrahigh performance liquid chromatography coupled to time-of-flight mass spectrometry (UPLC/TOFMS) in a novel two-step design study. Four different organic solvents (acetonitrile, acetone, methanol, and ethanol) were used to assess human blood plasma preparation via protein precipitation. The optimal conditions for sample preparation were investigated, with consideration to the number of extracted markers, data quality/reproducibility, and column lifetime prolongation. Isotopically labeled internal standards were used to monitor data quality/reproducibility. Gel electrophoresis was also used to measure the protein content in the supernatant of the "first design step" allowing assessment of the amount of protein that would be injected/accumulate onto the column after many injections that would be apparent in a global metabolic profiling study. The second design step followed on from the results obtained in step one, with four of the best conditions selected and further investigated, looking at the effects of vortex time and temperature on precipitation/extraction. Two choices of solvent compositions were found to be "optimal" for preparation of plasma for global metabolic profiling analysis; these were "methanol/ethanol" (1:1, v/v) and "methanol/acetonitrile/acetone" (1:1:1, v/v/v) added to plasma (4:1 ratio, 400 microL total volume).

Global metabolic profiling analysis on human urine by UPLC-TOFMS: issues and method validation in nutritional metabolomics.

Optimisation and method validation was assessed here for metabolic profiling analysis of urine samples using UPLC-TOFMS. A longer run time of 31 min revealed greater reproducibility, and the higher number of variables was identified as compared to shortened run times (10 and 26 min). We have also implemented two QC urine samples enabling the assessment of the quality and reproducibility of the data generated during the whole analytical workflow (retention time drift, mass precision and fluctuation of the ion responses over time). Based on the QC data, suitable standards for ensuring consistent analytical results for metabolomics applications using the UPLC-MS techniques are recommended.

Use of molecularly imprinted solid-phase extraction sorbent for the determination of four 5-nitroimidazoles and three of their metabolites from egg-based samples before tandem LC-ESIMS/MS analysis.

A nitroimidazole, molecularly imprinted polymer (MIP) was tested to extract four 5-nitroimidazoles (i.e., dimetridazole (DMZ), ipronidazole (IPZ), metronidazole (MNZ), and ronidazole (RNZ)) and three of their metabolites (i.e., DMZOH, IPZOH, and MNZOH) from egg powder samples. Various MIP templates were produced, and their selectivity was assessed on nitroimidazole standard solutions using liquid chromatography coupled with ultraviolet detection. The optimal cleanup was then used for the extraction of nitroimidazole in egg powder samples, and their quantification was achieved by isotope dilution LC-ESIMS/MS. The sample preparation entails a solubilization of the samples with water and acetonitrile followed by a MISPE cleanup step before LC-ESIMS/MS analysis. Data acquisition was achieved using selected reaction monitoring, and quantification was done with five deuterated analogues (i.e., DMZ- d(3), RNZ- d(3), IPZ- d(3), DMZOH- d(3), and IPZOH- d(3)). DMZOH- d(3) was used to quantify MNZ and MNZOH since they do not have their corresponding internal standards. The method was validated according to the European Union criteria by spiking experiments at concentration levels of 1, 2, and 3 microg/kg. At these three levels and for compounds having their own internal standards, acceptable performance data were obtained, with internal standard corrected recoveries ranging from 91 to 111%, and decision limits (CCalpha) and detection capabilities (CCbeta) were below 0.34 and 0.39 microg/kg, respectively.

Quantitative high-throughput analysis of 16 (fluoro)quinolones in honey using automated extraction by turbulent flow chromatography coupled to liquid chromatography-tandem mass spectrometry.

A method making use of turbulent flow chromatography automated online extraction with tandem mass spectrometry (MS/MS) was developed for the analysis of 4 quinolones and 12 fluoroquinolones in honey. The manual sample preparation was limited to a simple dilution of the honey test portion in water followed by a filtration. The extract was online purified on a large particle size extraction column where the sample matrix was washed away while the analytes were retained. Subsequently, the analytes were eluted from the extraction column onto an analytical column by means of an organic solvent prior to chromatographic separation and MS detection. Validation was performed at three fortification levels (i.e., 5, 20, and 50 microg/kg) in three different honeys (acacia, multiflower, and forest) using the single-point calibration procedure by means of either a 10 or 25 microg/kg calibrant. Good recovery (85-127%, median 101%) as well as within-day (2-18%, median 6%) and between-day (2-42%, median 9%) precision values was obtained whatever the level of fortification and the analyte surveyed. Due to the complexity of the honey matrix and the large variation of the MS/MS transition reaction signals, which were honey-dependent, the limit of quantification for all compounds was arbitrarily set at the lowest fortification level considered during the validation, e.g., 5 microg/kg. This method has been successfully applied in a minisurvey of 34 honeys, showing ciprofloxacin and norfloxacin as the main (fluoro)quinolone antibiotics administered to treat bacterial diseases of bees. Turbulent flow chromatography coupled to LC-MS/MS showed a strong potential as an alternative method compared to those making use of offline sample preparation, in terms of both increasing the analysis throughput and obtaining higher reproducibility linked to automation to ensure the absence of contaminants in honey samples.