RESUMEN
A III/V-on-Bulk-Si DFB laser with a long phase shift section optimized for single-mode stability is presented. The optimized phase shift allows stable single-mode operations up to 20 times a threshold current. This mode stability is achieved by a gain difference between fundamental and higher modes maximized by sub-wavelength-scale tuning of the phase shift section. In SMSR-based yield analyses, the long-phase-shifted DFB laser showed superior performance compared to the conventional λ/4-phase-shifted ones.
RESUMEN
Electrodermal activity (EDA) is a popular index of mental stress. State-of-the-art EDA sensors suffer from obstructiveness on the palm or low signal fidelity off the palm. Our previous invention of sub-micron-thin imperceptible graphene e-tattoos (GET) is ideal for unobstructive EDA sensing on the palm. However, robust electrical connection between ultrathin devices and rigid circuit boards is a long missing component for ambulatory use. To minimize the well-known strain concentration at their interfaces, we propose heterogeneous serpentine ribbons (HSPR), which refer to a GET serpentine partially overlapping with a gold serpentine without added adhesive. A fifty-fold strain reduction in HSPR vs. heterogeneous straight ribbons (HSTR) has been discovered and understood. The combination of HSPR and a soft interlayer between the GET and an EDA wristband enabled ambulatory EDA monitoring on the palm in free-living conditions. A newly developed EDA event selection policy leveraging unbiased selection of phasic events validated our GET EDA sensor against gold standards.
Asunto(s)
Grafito , Tatuaje , Respuesta Galvánica de la Piel , Monitoreo AmbulatorioRESUMEN
E-skins consisting of soft pressure sensors are enabling technology for soft robots, bio-integrated devices, and deformable touch panels. A well-known bottleneck of capacitive pressure sensors (CPS) is the drastic decay in sensitivity with increasing pressure. To overcome this challenge, we have invented a hybrid-response pressure sensor (HRPS) that exhibits both the piezoresistive and piezocapacitive effects intrinsic to a highly porous nanocomposite (PNC) with carbon nanotube (CNT) dopants. The HRPS is constructed with two conductive electrodes sandwiching a laminated PNC and a stiff dielectric layer. We have simplified the hybrid response into a parallel resistor-capacitor circuit, whose output depends on the AC (alternating current) frequency used for the capacitance measurement. Herein, through theoretical analysis, we discover a dimensionless parameter that governs the frequency responses of the HRPS. The master curve is validated through experiments on the HRPS with various doping ratios, subject to different compressive strains, under diverse AC frequencies. In addition, the relative contribution of piezoresistive and piezocapacitive mechanisms are also found to vary with the three parameters. Based on this experimentally validated theory, we establish a very practical guideline for selecting the optimal AC frequency for the capacitance measurement of HRPSs.
RESUMEN
Soft pressure sensors are critical components of e-skins, which are playing an increasingly significant role in two burgeoning fields: soft robotics and bioelectronics. Capacitive pressure sensors (CPS) are popular given their mechanical flexibility, high sensitivity, and signal stability. After two decades of rapid development, e-skins based on soft CPS are able to achieve human-skin-like softness and sensitivity. However, there remain two major roadblocks in the way for practical application of soft CPS: the decay of sensitivity with increased pressure and the coupled response between in-plane stretch and out-of-plane pressure. In addition to existing strategies of building porous and/or high dielectric constant soft dielectrics, are there any other promising methods to overcome those bottlenecks? Are there any further considerations for the widespread deployment of e-skins? This perspective aims to shed some light on those topics.
Asunto(s)
Robótica , Dispositivos Electrónicos Vestibles , Humanos , Porosidad , PielRESUMEN
Past research aimed at increasing the sensitivity of capacitive pressure sensors has mostly focused on developing dielectric layers with surface/porous structures or higher dielectric constants. However, such strategies have only been effective in improving sensitivities at low pressure ranges (e.g., up to 3 kPa). To overcome this well-known obstacle, herein, a flexible hybrid-response pressure sensor (HRPS) composed of an electrically conductive porous nanocomposite (PNC) laminated with an ultrathin dielectric layer is devised. Using a nickel foam template, the PNC is fabricated with carbon nanotubes (CNTs)-doped Ecoflex to be 86% porous and electrically conductive. The PNC exhibits hybrid piezoresistive and piezocapacitive responses, resulting in significantly enhanced sensitivities (i.e., more than 400%) over wide pressure ranges, from 3.13 kPa-1 within 0-1 kPa to 0.43 kPa-1 within 30-50 kPa. The effect of the hybrid responses is differentiated from the effect of porosity or high dielectric constants by comparing the HRPS with its purely piezocapacitive counterparts. Fundamental understanding of the HRPS and the prediction of optimal CNT doping are achieved through simplified analytical models. The HRPS is able to measure pressures from as subtle as the temporal arterial pulse to as large as footsteps.
RESUMEN
High-performance wearable and implantable devices capable of recording physiological signals and delivering appropriate therapeutics in real time are playing a pivotal role in revolutionizing personalized healthcare. However, the mechanical and biochemical mismatches between rigid, inorganic devices and soft, organic human tissues cause significant trouble, including skin irritation, tissue damage, compromised signal-to-noise ratios, and limited service time. As a result, profuse research efforts have been devoted to overcoming these issues by using flexible and stretchable device designs and soft materials. Here, we summarize recent representative research and technological advances for soft bioelectronics, including conformable and stretchable device designs, various types of soft electronic materials, and surface coating and treatment methods. We also highlight applications of these strategies to emerging soft wearable and implantable devices. We conclude with some current limitations and offer future prospects of this booming field.
Asunto(s)
Dispositivos Electrónicos Vestibles , Electrónica , Diseño de Equipo , Humanos , Prótesis e ImplantesRESUMEN
Spatial light modulators are essential optical elements in applications that require the ability to regulate the amplitude, phase and polarization of light, such as digital holography, optical communications and biomedical imaging. With the push towards miniaturization of optical components, static metasurfaces are used as competent alternatives. These evolved to active metasurfaces in which light-wavefront manipulation can be done in a time-dependent fashion. The active metasurfaces reported so far, however, still show incomplete phase modulation (below 360°). Here we present an all-solid-state, electrically tunable and reflective metasurface array that can generate a specific phase or a continuous sweep between 0 and 360° at an estimated rate of 5.4 MHz while independently adjusting the amplitude. The metasurface features 550 individually addressable nanoresonators in a 250 × 250 µm2 area with no micromechanical elements or liquid crystals. A key feature of our design is the presence of two independent control parameters (top and bottom gate voltages) in each nanoresonator, which are used to adjust the real and imaginary parts of the reflection coefficient independently. To demonstrate this array's use in light detection and ranging, we performed a three-dimensional depth scan of an emulated street scene that consisted of a model car and a human figure up to a distance of 4.7 m.
Asunto(s)
Dispositivos Ópticos , Tecnología de Sensores Remotos/instrumentación , Automóviles , Diseño de Equipo , Humanos , Imagenología Tridimensional , Luz , Cristales Líquidos , Miniaturización , Nanoestructuras/química , Nanotecnología/instrumentación , Prueba de Estudio Conceptual , Tecnología de Sensores Remotos/métodosRESUMEN
Octopus-inspired cratered surfaces have recently emerged as a new class of reusable physical adhesives. Preload-dependent adhesion and enhanced adhesion under water distinguish them from the well-studied gecko-inspired pillared surfaces. Despite growing experimental evidence, modeling frameworks and mechanistic understanding of cratered surfaces are still very limited. We recently developed a framework to evaluate suction forces produced by isolated craters in air. In this paper, we focus on underwater craters. The suction force-preload relation predicted by this framework has been validated by experiments carried out with an incompressible fluid under small and moderate preloads. Our model breaks down under a large preload due to multiple possible reasons including liquid vaporization. A direct comparison between liquid and air-filled craters has been carried out and the dependence on the depth of water has been revealed. We find that the suction forces generated by underwater craters scale with the specimen modulus but exhibit non-monotonic dependence on the aspect ratio of the craters.
RESUMEN
An O-band DFB laser heterogeneously integrated on bulk-silicon platform is presented. A high wall plug efficiency of over 8% up to 70°C is achieved due to efficient heat dissipation from III/V active region to silicon platform. The single-mode operation is maintained in a wide current range with side-mode suppression ratio over 45dB. This result completes the optical device library suite for the bulk-silicon platform used in most semiconductor products.
RESUMEN
In this Letter, we report Ge p-i-n avalanche photodetectors (APD) with low dark current (sub 1 µA below V(R)=5 V), low operating voltage (avalanche breakdown voltage=8-13 V), and high multiplication gain (440-680) by exploiting a point defect healing method (between 600°C and 650°C) and optimizing the doping concentration of the intrinsic region (p-type ~10¹7 cm⻳). In addition, Raman spectroscopy and electrochemical capacitance voltage analyses were performed to investigate the junction interfaces in more detail. This successful demonstration of Ge p-i-n APD with low dark current, low operating voltage, and high gain is promising for low-power and high-sensitivity Ge PD applications.
RESUMEN
We investigate temperature characteristics of 445-nm-emitting InGaN blue laser diodes (LDs) with several types of active-layer structures. The double quantum-well (QW) LD structures having an n-type doped barrier show negative or very high characteristic temperature depending on the barrier In composition. On the contrary, the double QW structures having an undoped barrier and the single QW structure show normal temperature dependence of LD characteristics. From the simulation of carrier density and optical gain, it is found that the anomalous temperature characteristics of blue LDs are closed related to the inhomogeneous hole distribution between QWs due to the low hole mobility of InGaN materials.