RESUMEN
BACKGROUND: The inhibition of neddylation by the preclinical drug MLN4924 represents a new strategy to combat cancer. However, despite being effective against hematologic malignancies, its success in solid tumors, where cell-cell and cell-ECM interactions play essential roles, remains elusive. METHODS: Here, we studied the effects of MLN4924 on cell growth, migration and invasion in cultured prostate cancer cells and in disease-relevant prostate tumoroids. Using focused protein profiling, drug and RNAi screening, we analyzed cellular pathways activated by neddylation inhibition. RESULTS: We show that mechanical stress induced by MLN4924 in prostate cancer cells significantly affects the therapeutic outcome. The latter depends on the cell type and involves distinct Rho isoforms. In LNCaP and VCaP cells, the stimulation of RhoA and RhoB by MLN4924 markedly upregulates the level of tight junction proteins at cell-cell contacts, which augments the mechanical strain induced by Rho signaling. This "tight junction stress response" (TJSR) causes the collapse of cell monolayers and a characteristic rupture of cancer spheroids. Notably, TJSR is a major cause of drug-induced apoptosis in these cells. On the other hand, in PC3 cells that underwent partial epithelial-to-mesenchymal transition (EMT), the stimulation of RhoC induces an adverse effect by promoting amoeboid cell scattering and invasion. We identified complementary targets and drugs that allow for the induction of TJSR without stimulating RhoC. CONCLUSIONS: Our finding that MLN4924 acts as a mechanotherapeutic opens new ways to improve the efficacy of neddylation inhibition as an anticancer approach.
Asunto(s)
Apoptosis , Neoplasias , Proliferación Celular , Humanos , Masculino , Proteína NEDD8/metabolismo , Estrés MecánicoRESUMEN
This review summarizes recent advances in micro- and nanopore technologies with a focus on the functionalization of pores using a promising method named contactless electro-functionalization (CLEF). CLEF enables the localized grafting of electroactive entities onto the inner wall of a micro- or nano-sized pore in a solid-state silicon/silicon oxide membrane. A voltage or electrical current applied across the pore induces the surface functionalization by electroactive entities exclusively on the inside pore wall, which is a significant improvement over existing methods. CLEF's mechanism is based on the polarization of a sandwich-like silicon/silicon oxide membrane, creating electronic pathways between the core silicon and the electrolyte. Correlation between numerical simulations and experiments have validated this hypothesis. CLEF-induced micro- and nanopores functionalized with antibodies or oligonucleotides were successfully used for the detection and identification of cells and are promising sensitive biosensors. This technology could soon be successfully applied to planar configurations of pores, such as restrictions in microfluidic channels.
Asunto(s)
Técnicas Biosensibles , Silicio/química , Impedancia Eléctrica , Técnicas Electroquímicas , Membranas Artificiales , NanoporosRESUMEN
A recent decline in the discovery of novel medications challenges the widespread use of 2D monolayer cell assays in the drug discovery process. As a result, the need for more appropriate cellular models of human physiology and disease has renewed the interest in spheroid 3D culture as a pertinent model for drug screening. However, despite technological progress that has significantly simplified spheroid production and analysis, the seeming complexity of the 3D approach has delayed its adoption in many laboratories. The present report demonstrates that the use of a spheroid model may be straightforward and can provide information that is not directly available with a standard 2D approach. We describe a cost-efficient method that allows for the production of an array of uniform spheroids, their staining with vital dyes, real-time monitoring of drug effects, and an ATP-endpoint assay, all in the same 96-well U-bottom plate. To demonstrate the method performance, we analyzed the effect of the preclinical anticancer drug MLN4924 on spheroids formed by VCaP and LNCaP prostate cancer cells. The drug has different outcomes in these cell lines, varying from cell cycle arrest and protective dormancy to senescence and apoptosis. We demonstrate that by using high-content analysis of spheroid arrays, the effect of the drug can be described as a series of EC50 values that clearly dissect the cytostatic and cytotoxic drug actions. The method was further evaluated using four standard cancer chemotherapeutics with different mechanisms of action, and the effect of each drug is described as a unique multi-EC50 diagram. Once fully validated in a wider range of conditions, this method could be particularly valuable for phenotype-based drug discovery.
RESUMEN
Video microscopy offers outstanding capabilities to investigate the dynamics of biological and pathological mechanisms in optimal culture conditions. Contact imaging is one of the simplest imaging architectures to digitally record images of cells due to the absence of any objective between the sample and the image sensor. However, in the framework of in-line holography, other optical components, e.g., an optical filter or a pinhole, are placed underneath the light source in order to illuminate the cells with a coherent or quasi-coherent incident light. In this study, we demonstrate that contact imaging with an incident light of both limited temporal and spatial coherences can be achieved with sufficiently high quality for most applications in cell biology, including monitoring of cell sedimentation, rolling, adhesion, spreading, proliferation, motility, death and detachment. Patterns of cells were recorded at various distances between 0 and 1000 µm from the pixel array of the image sensors. Cells in suspension, just deposited or at mitosis focalise light into photonic nanojets which can be visualised by contact imaging. Light refraction by cells significantly varies during the adhesion process, the cell cycle and among the cell population in connection with every modification in the tridimensional morphology of a cell.
Asunto(s)
Microscopía por Video/métodos , Imagen de Lapso de Tiempo/métodos , Adhesión Celular , Técnicas de Cultivo de Célula , Movimiento Celular , Proliferación Celular , Células Cultivadas , HumanosRESUMEN
MiRNAs are key regulators of gene expression. By binding to many genes, they create a complex network of gene co-regulation. Here, using a network-based approach, we identified miRNA hub groups by their close connections and common targets. In one cluster containing three miRNAs, miR-612, miR-661 and miR-940, the annotated functions of the co-regulated genes suggested a role in small GTPase signalling. Although the three members of this cluster targeted the same subset of predicted genes, we showed that their overexpression impacted cell fates differently. miR-661 demonstrated enhanced phosphorylation of myosin II and an increase in cell invasion, indicating a possible oncogenic miRNA. On the contrary, miR-612 and miR-940 inhibit phosphorylation of myosin II and cell invasion. Finally, expression profiling in human breast tissues showed that miR-940 was consistently downregulated in breast cancer tissues.
Asunto(s)
Citoesqueleto de Actina/genética , Neoplasias de la Mama/genética , Regulación Neoplásica de la Expresión Génica , MicroARNs/genética , Citoesqueleto de Actina/metabolismo , Neoplasias de la Mama/metabolismo , Movimiento Celular/genética , Proliferación Celular , Biología Computacional/métodos , Bases de Datos de Ácidos Nucleicos , Femenino , Perfilación de la Expresión Génica , Ontología de Genes , Redes Reguladoras de Genes , Humanos , Anotación de Secuencia Molecular , Proteínas de Unión al GTP Monoméricas/metabolismo , Transducción de SeñalRESUMEN
BACKGROUND: Solid-state micropores have been widely employed for 6 decades to recognize and size flowing unlabeled cells. However, the resistive-pulse technique presents limitations when the cells to be differentiated have overlapping dimension ranges such as B and T lymphocytes. An alternative approach would be to specifically capture cells by solid-state micropores. Here, the inner wall of 15-µm pores made in 10 µm-thick silicon membranes was covered with antibodies specific to cell surface proteins of B or T lymphocytes. The selective trapping of individual unlabeled cells in a bio-functionalized micropore makes them recognizable just using optical microscopy. METHODOLOGY/PRINCIPAL FINDINGS: We locally deposited oligodeoxynucleotide (ODN) and ODN-conjugated antibody probes on the inner wall of the micropores by forming thin films of polypyrrole-ODN copolymers using contactless electro-functionalization. The trapping capabilities of the bio-functionalized micropores were validated using optical microscopy and the resistive-pulse technique by selectively capturing polystyrene microbeads coated with complementary ODN. B or T lymphocytes from a mouse splenocyte suspension were specifically immobilized on micropore walls functionalized with complementary ODN-conjugated antibodies targeting cell surface proteins. CONCLUSIONS/SIGNIFICANCE: The results showed that locally bio-functionalized micropores can isolate target cells from a suspension during their translocation throughout the pore, including among cells of similar dimensions in complex mixtures.
Asunto(s)
Linfocitos B/citología , Separación Celular/métodos , Bazo/citología , Linfocitos T/citología , Animales , Anticuerpos/química , Anticuerpos/metabolismo , Separación Celular/instrumentación , Filtración/instrumentación , Filtración/métodos , Inmunoconjugados/química , Ratones , Microesferas , Oligodesoxirribonucleótidos/química , Polímeros/química , Pirroles/química , Dióxido de Silicio/químicaRESUMEN
By applying an external electric field across a micropore via an electrolyte, metal ions in the electrolyte can be reduced locally onto the inner wall of the micropore, which was fabricated in a silica-covered silicon membrane. This maskless metal deposition on the silica surface is a result of the pore membrane polarization in the electric field.
RESUMEN
The use of biological-probe-modified solid-state pores in biosensing is currently hindered by difficulties in pore-wall functionalization. The surface to be functionalized is small and difficult to target and is usually chemically similar to the bulk membrane. Herein, we demonstrate the contactless electrofunctionalization (CLEF) approach and its mechanism. This technique enables the one-step local functionalization of the single pore wall fabricated in a silica-covered silicon membrane. CLEF is induced by polarization of the pore membrane in an electric field and requires a sandwich-like composition and a conducting or semiconducting core for the pore membrane. The defects in the silica layer of the micropore wall enable the creation of an electric pathway through the silica layer, which allows electrochemical reactions to take place locally on the pore wall. The pore diameter is not a limiting factor for local wall modification using CLEF. Nanopores with a diameter of 200 nm fabricated in a silicon membrane and covered with native silica layer have been successfully functionalized with this method, and localized pore-wall modification was obtained. Furthermore, through proof-of-concept experiments using ODN-modified nanopores, we show that functionalized nanopores are suitable for translocation-based biosensing.
Asunto(s)
Técnicas Biosensibles/métodos , Microtecnología/métodos , Nanoporos , Electricidad , Membranas Artificiales , Dióxido de Silicio/químicaRESUMEN
Cell arrays are of foremost importance for many applications in pharmaceutical research or fundamental biology. Although arraying techniques have been widely investigated for adherent cells, organization of cells in suspension has been rarely considered. The arraying of non-adherent cells using the diamagnetic repulsive force is presented. A planar arrangement of Jurkat cells is achieved at the microscale above high quality microfabricated permanent magnets with remanent magnetization of J(r)≈ 1 T, in the presence of a paramagnetic contrast agent. The cytotoxicity of three Gd based contrast agents, Gd-DOTA, Gd-BOPTA and Gd-HP-DO3A, is studied. Among them, Gd-HP-DO3A appears to be the most biocompatible toward Jurkat cells. In close agreement with analytical simulations, diamagnetically 'suspended' cells have been successfully arrayed above square and honeycomb-like micromagnet arrays, which act as a "diamagnetophobic" surface. Living cell trapping is achieved in a simple manner using concentrations of Gd-HP-DO3A as low as 1.5 mM.
Asunto(s)
Técnicas de Cultivo de Célula/instrumentación , Imanes , Análisis de Matrices Tisulares/instrumentación , Procesos de Crecimiento Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Medios de Contraste/farmacología , Diseño de Equipo , Gadolinio , Compuestos Heterocíclicos/farmacología , Humanos , Células Jurkat , Meglumina/análogos & derivados , Meglumina/farmacología , Compuestos Organometálicos/farmacologíaRESUMEN
Diamagnetic levitation of water droplets in air is a promising phenomenon to achieve contactless manipulation of chemical or biochemical samples. This noncontact handling technique prevents contaminations of samples as well as provides measurements of interaction forces between levitating reactors. Under a nonuniform magnetic field, diamagnetic bodies such as water droplets experience a repulsive force which may lead to diamagnetic levitation of a single or few micro-objects. The levitation of several repulsively charged picoliter droplets was successfully performed in a ~1 mm(2) adjustable flat magnetic well provided by a centimeter-sized cylindrical permanent magnet structure. Each droplet position results from the balance between the centripetal diamagnetic force and the repulsive Coulombian forces. Levitating water droplets self-organize into satellite patterns or thin clouds, according to their charge and size. Small triangular lattices of identical droplets reproduce magneto-Wigner crystals. Repulsive forces and inner charges can be measured in the piconewton and the femtocoulomb ranges, respectively. Evolution of interaction forces is accurately followed up over time during droplet evaporation.
RESUMEN
We present a device enabling impedance measurements that probe the motility and mitosis of a single adherent cell in a controlled way. The micrometre-sized electrodes are designed for adhesion of an isolated cell and enhanced sensitivity to cell motion. The electrode surface is switched electro-chemically to favour cell adhesion, and single cells are attracted to the electrode using positive dielectrophoresis. Periods of linear variation in impedance with time correspond to the motility of a single cell adherent to the surface estimated at 0.6 µm h(-1). In the course of our study we observed the impedance changes associated with mitosis of a single cell. Electrical measurements, carried out concomitantly with optical observations, revealed three phases, prophase, metaphase and anaphase in the time variation of the impedance during cell division. Maximal impedance was observed at metaphase with a 20% increase of the impedance. We argue that at mitosis, the changes detected were due to the charge density distribution at the cell surface. Our data demonstrate subtle electrical changes associated with cell motility and for the first time with division at the single-cell level. We speculate that this could open up new avenues for characterizing healthy and pathological cells.
Asunto(s)
Técnicas de Cultivo de Célula/instrumentación , Movimiento Celular/fisiología , Conductometría/instrumentación , Técnicas Analíticas Microfluídicas/instrumentación , Mitosis/fisiología , Pletismografía de Impedancia/instrumentación , Diseño de Equipo , Análisis de Falla de Equipo , Células HeLa , HumanosRESUMEN
Customized pores are smart components that find challenging applications in a variety of fields including purification membranes and biosensing systems. The incorporation of recognition probes within pores is therefore a challenge, due to the technical difficulty of delimiting the area functionalized and obtaining the localized, specific chemical modification of pore walls. An innovative approach, named contactless electrofunctionalization (CLEF), is presented to overcome this problem. CLEF allows easy, one-step modification of the inner surface of a pore etched in a dielectric membrane. The pore wall is coated under the influence of an electric field created by the application of a voltage between two electrodes, located near but not in contact with the pore openings. This specific localization of the deposited material within the pore is extremely rapid. Coatings were reliably and reproducibly obtained using polypyrrole co-polymers bearing oligonucleotides, demonstrating that this technology has a promising future in the design of biosensors. Moreover, the versatility of this process allows the deposition of various electroactive entities such as iridium oxide and therefore indicates a strong potential for diverse applications involving porous materials.
Asunto(s)
Membranas/química , Nanotecnología/métodos , Modelos Teóricos , PorosidadRESUMEN
To analyze the phenotypic consequences of perturbing mammalian cells with drugs, there is an increasing need for systematic cell-based assays in an HTS format. Cell microarrays provide an attractive solution as they offer more than a simple miniaturization and mechanization of conventional microtiter plates. While standard monolayer two-dimensional culture conditions are poor mimics of the cellular environment in situ, microfabricated systems enable three-dimensional organotypic cell cultures and have the potential to provide biological insight not achievable before. This article compares different cell microarray formats and evaluates their potential use in the drug discovery process.