RESUMEN
Spin injection using ferromagnetic semiconductors at room temperature is a building block for the realization of spin-functional semiconductor devices. Nevertheless, this has been very challenging due to the lack of reliable room-temperature ferromagnetism in well-known group IV and III-V based semiconductors. Here, we demonstrate room-temperature spin injection by using spin pumping in a BiSb/(Ga,Fe)Sb heterostructure, where (Ga,Fe)Sb is a ferromagnetic semiconductor (FMS) with high Curie temperature (TC) and BiSb is a topological insulator (TI). Despite the very small magnetization of (Ga,Fe)Sb at room temperature (45 emu/cc), we detected spin injection from (Ga,Fe)Sb by utilizing the large inverse spin Hall effect (ISHE) in BiSb. Our study provides the first demonstration of spin injection at room temperature from a FMS.
RESUMEN
Layered materials, such as graphene and transition metal dichalcogenides, are able to obtain new properties and functions through the modification of their crystal arrangements. In particular, ferromagnetism in polycrystalline MoS2 is of great interest because the corresponding nonmagnetic single crystals exhibit spontaneous spin splitting only through the formation of grain boundaries. However, no one has reported direct evidence of this unique phenomenon thus far. Herein, we demonstrate ferromagnetism modulation by an ultralow current density < 103 A/cm2 in 7.5-nm-thick polycrystalline MoS2, in which magnetoresistance shows three patterns according to the current intensity: wide dip, nondip and narrow dip structures. Since magnetoresistance occurs because of the interaction between the current of 4d electrons in the bulk and localized 4d spins in grain boundaries, this result provides evidence of the current modulation of ferromagnetism induced by grain boundaries. Our findings pave the way for the investigation of a novel method of magnetization switching with low power consumption for magnetic random access memories.
RESUMEN
Spin orbit torque (SOT) magnetization switching of ferromagnets with large perpendicular magnetic anisotropy has a great potential for the next generation non-volatile magnetoresistive random-access memory (MRAM). It requires a high performance pure spin current source with a large spin Hall angle and high electrical conductivity, which can be fabricated by a mass production technique. In this work, we demonstrate ultrahigh efficient and robust SOT magnetization switching in fully sputtered BiSb topological insulator and perpendicularly magnetized Co/Pt multilayers. Despite fabricated by the magnetron sputtering instead of the laboratory molecular beam epitaxy, the topological insulator layer, BiSb, shows a large spin Hall angle of θSH = 10.7 and high electrical conductivity of σ = 1.5 × 105 Ω-1 m-1. Our results demonstrate the feasibility of BiSb topological insulator for implementation of ultralow power SOT-MRAM and other SOT-based spintronic devices.
RESUMEN
Topological materials, such as topological insulators (TIs), have great potential for ultralow power spintronic devices, thanks to their giant spin Hall effect. However, the giant spin Hall angle (θSH > 1) is limited to a few chalcogenide TIs with toxic elements and low melting points, making them challenging for device integration during the silicon Back-End-of-Line (BEOL) process. Here, we show that by using a half-Heusler alloy topological semi-metal (HHA-TSM), YPtBi, it is possible to achieve both a giant θSH up to 4.1 and a high thermal budget up to 600 °C. We demonstrate magnetization switching of a CoPt thin film using the giant spin Hall effect of YPtBi by current densities lower than those of heavy metals by one order of magnitude. Since HHA-TSM includes a group of three-element topological materials with great flexibility, our work opens the door to the third-generation spin Hall materials with both high θSH and high compatibility with the BEOL process that would be easily adopted by the industry.
RESUMEN
Giant spin-orbit torque (SOT) from topological insulators (TIs) provides an energy efficient writing method for magnetic memory, which, however, is still premature for practical applications due to the challenge of the integration with magnetic tunnel junctions (MTJs). Here, we demonstrate a functional TI-MTJ device that could become the core element of the future energy-efficient spintronic devices, such as SOT-based magnetic random-access memory (SOT-MRAM). The state-of-the-art tunneling magnetoresistance (TMR) ratio of 102% and the ultralow switching current density of 1.2 × 105 A cm-2 have been simultaneously achieved in the TI-MTJ device at room temperature, laying down the foundation for TI-driven SOT-MRAM. The charge-spin conversion efficiency θSH in TIs is quantified by both the SOT-induced shift of the magnetic switching field (θSH = 1.59) and the SOT-induced ferromagnetic resonance (ST-FMR) (θSH = 1.02), which is one order of magnitude larger than that in conventional heavy metals. These results inspire a revolution of SOT-MRAM from classical to quantum materials, with great potential to further reduce the energy consumption.
RESUMEN
The large spin Hall effect in topological insulators (TIs) is very attractive for ultralow-power spintronic devices. However, evaluation of the spin Hall angle and spin-orbit torque (SOT) of TIs is usually performed on high-quality single-crystalline TI thin films grown on dedicated III-V semiconductor substrates. Here, we report on room-temperature ultralow power SOT magnetization switching of a ferrimagnetic layer by non-epitaxial BiSb TI thin films deposited on Si/SiO2 substrates. We show that non-epitaxial BiSb thin films outperform heavy metals and other epitaxial TI thin films in terms of the effective spin Hall angle and switching current density by one to nearly two orders of magnitude. The critical SOT switching current density in BiSb is as low as 7 × 104 A/cm2 at room temperature. The robustness of BiSb against crystal defects demonstrate its potential applications to SOT-based spintronic devices.
RESUMEN
Spin-orbit torque switching using the spin Hall effect in heavy metals and topological insulators has a great potential for ultralow power magnetoresistive random-access memory. To be competitive with conventional spin-transfer torque switching, a pure spin current source with a large spin Hall angle (θSH > 1) and high electrical conductivity (σ > 105 Ω-1 m-1) is required. Here we demonstrate such a pure spin current source: conductive topological insulator BiSb thin films with σ ≈ 2.5 × 105 Ω-1 m-1, θSH ≈ 52 and spin Hall conductivity σSH ≈ 1.3 × 107 [Formula: see text]Ω-1 m-1 at room temperature. We show that BiSb thin films can generate a very large spin-orbit field of 2.3 kOe MA-1 cm2 and a critical switching current density as low as 1.5 MA cm-2 in Bi0.9Sb0.1/MnGa bilayers, which underlines the potential of BiSb for industrial applications.
RESUMEN
Large spin-splitting in the conduction band and valence band of ferromagnetic semiconductors, predicted by the influential mean-field Zener model and assumed in many spintronic device proposals, has never been observed in the mainstream p-type Mn-doped ferromagnetic semiconductors. Here, using tunnelling spectroscopy in Esaki-diode structures, we report the observation of such a large spontaneous spin-splitting energy (31.7-50 meV) in the conduction band bottom of n-type ferromagnetic semiconductor (In,Fe)As, which is surprising considering the very weak s-d exchange interaction reported in several zinc-blende type semiconductors. The mean-field Zener model also fails to explain consistently the ferromagnetism and the spin-splitting energy of (In,Fe)As, because we found that the Curie temperature values calculated using the observed spin-splitting energies are much lower than the experimental ones by a factor of 400. These results urge the need for a more sophisticated theory of ferromagnetic semiconductors.
RESUMEN
With the goal of creating magneto-optical devices, we demonstrated forming nanostructures inside a substrate of cerium-substituted yttrium iron garnet (Ce:YIG) by means of direct laser writing. Laser irradiation changed both the optical and magnetic properties of Ce:YIG. The measurements showed that the refractive index was increased by 0.015 (about 0.7% change) and the magnetization property was changed from hard to soft to decrease the coercivity. This technology enables the formation of 3-dimensional optical and magnetic nanostructures in YIG and will contribute to the development of novel devices for optical communication and photonic integration.
RESUMEN
Spin-relaxation time is key to the performance of spin-based devices. Although the spin-relaxation times of semiconductor materials are typically approximately 100 ns (ref. 3), they are on the order of picoseconds in bulk metals due to the high density of scattering centres. In metallic nanoparticles, the spin-relaxation times can be strongly enhanced due to the quantum size effect, reaching 150 ns in cobalt nanoparticles. Here, we show that for extra electrons confined in a single ferromagnetic-metal MnAs nanoparticle embedded in a GaAs semiconductor matrix, the spin-relaxation time can reach 10 micros at 2 K, which is seven orders of magnitude longer than those of conventional metallic thin film or bulk systems, and the longest value ever reported for metallic nanoparticles. This long relaxation time is made possible by using epitaxially grown single-crystal devices with abrupt interfaces, and by avoiding surface contamination of the MnAs nanoparticle. Such a long spin-relaxation time can be very useful in nanoscale spintronic devices.
Asunto(s)
Arsenicales/química , Galio/química , Magnesio/química , Nanopartículas/ultraestructura , Nanoestructuras/química , Nanoestructuras/ultraestructura , Nanotecnología/instrumentación , Marcadores de Spin , Cristalización/métodos , Diseño de Equipo , Análisis de Falla de Equipo , Ensayo de Materiales , Nanopartículas/química , Tamaño de la Partícula , SemiconductoresRESUMEN
The valence-band structure and the Fermi level (E(F)) position of ferromagnetic-semiconductor GaMnAs are quantitatively investigated by electrically detecting the resonant tunneling levels of a GaMnAs quantum well (QW) in double-barrier heterostructures. The resonant level from the heavy-hole first state is clearly observed in the metallic GaMnAs QW, indicating that holes have a high coherency and that E(F) exists in the band gap. Clear enhancement of tunnel magnetoresistance induced by resonant tunneling is demonstrated in these double-barrier heterostructures.