Hydrogenation of cyclohexene over single-atom Pt or Pd incorporated porous ceria nanoparticles under solvent-free conditions.

In order to maximize the utilization of noble metals in catalysis, single atom of palladium (Pd) and platinum (Pt) were incorporated individually in the framework of porous ceria (CeO2) by using a one-step flash combustion method. Samples with different Pd and Pt loading (0.5, 1, 2.5, and 5 wt%) were prepared and examined by using different analysis techniques such as XRD, ICP, N2 sorption measurements, SEM, HR-TEM, and XPS. The characterization data confirms the formation of zero-state single-atom Pt and Pd (with possible formation of Pd nanoparticles with a size less than 5 nm) incorporated onto the three-dimensional porous ceria structure. The catalytic activity of the synthesized materials was studied in the cyclohexene reduction to cyclohexane at 393 K and 3 atm of pure hydrogen (H2) gas as a model reaction. The obtained results demonstrated that the conversion percentage of cyclohexene is increasing with Pd or Pt loading. The best cyclohexene conversion, 21% and 29%, was achieved over the sample that contains 5 wt% of Pt and Pd, respectively. The collected catalytic data fit the zero-order reaction model, and the rate constant of each catalyst was determined. The catalytic experiments of the most-performed catalysts were repeated five times and the obtained loss in activity was insignificant.

Boosting Alkaline Seawater Oxidation of CoFe-layered Double Hydroxide Nanosheet Array by Cr Doping.

The pursuit of stable and efficient electrocatalysts toward seawater oxidation is of great interest, yet it poses considerable challenges. Herein, the utilization of Cr-doped CoFe-layered double hydroxide nanosheet array is reported on nickel-foam (Cr-CoFe-LDH/NF) as an efficient electrocatalyst for oxygen evolution reaction in alkaline seawater. The Cr-CoFe-LDH/NF catalyst can achieve current densities of 500 and 1000 mA cm -2 with remarkably low overpotentials of only 334 and 369 mV, respectively. Furthermore, it maintains at least 100 h stability when operated at 500 mA cm-2.

A brush-like Cu2O-CoO core-shell nanoarray: an efficient bifunctional electrocatalyst for overall seawater splitting.

Herein, a brush-like Cu2O-CoO core-shell nanoarray on copper foam (Cu2O-CoO/CF) can achieve efficient oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performance in alkaline seawater electrolyte. This Cu2O-CoO/CF shows overpotentials as low as 315 and 295 mV at 100 mA cm-2 for the OER and HER, respectively. Moreover, it could also be operated at 1.82 V with 100 mA cm-2 in a two-electrode electrolyzer and exhibits strong stability for at least 50 hours of electrolysis. The excellent performance and hierarchical structure advantages of Cu2O-CoO/CF provide new ideas for designing efficient seawater splitting electrocatalysts.

A Hierarchical CuO Nanowire@CoFe-Layered Double Hydroxide Nanosheet Array as a High-Efficiency Seawater Oxidation Electrocatalyst.

Seawater electrolysis has great potential to generate clean hydrogen energy, but it is a formidable challenge. In this study, we report CoFe-LDH nanosheet uniformly decorated on a CuO nanowire array on Cu foam (CuO@CoFe-LDH/CF) for seawater oxidation. Such CuO@CoFe-LDH/CF exhibits high oxygen evolution reaction electrocatalytic activity, demanding only an overpotential of 336 mV to generate a current density of 100 mA cm-2 in alkaline seawater. Moreover, it can operate continuously for at least 50 h without obvious activity attenuation.

High-efficiency electrocatalytic nitrite reduction toward ammonia synthesis on CoP@TiO2 nanoribbon array.

Electrochemical reduction of nitrite (NO2-) can satisfy the necessity for NO2- contaminant removal and deliver a sustainable pathway for ammonia (NH3) generation. Its practical application yet requires highly efficient electrocatalysts to boost NH3 yield and Faradaic efficiency (FE). In this study, CoP nanoparticle-decorated TiO2 nanoribbon array on Ti plate (CoP@TiO2/TP) is verified as a high-efficiency electrocatalyst for the selective reduction of NO2- to NH3. When measured in 0.1 M NaOH with NO2-, the freestanding CoP@TiO2/TP electrode delivers a large NH3 yield of 849.57 µmol h-1 cm-2 and a high FE of 97.01% with good stability. Remarkably, the subsequently fabricated Zn-NO2- battery achieves a high power density of 1.24 mW cm-2 while delivering a NH3 yield of 714.40 µg h-1 cm-2.

Pd-Doped Co3 O4 Nanoarray for Efficient Eight-Electron Nitrate Electrocatalytic Reduction to Ammonia Synthesis.

Ammonia (NH3 ) is an indispensable feedstock for fertilizer production and one of the most ideal green hydrogen rich fuel. Electrochemical nitrate (NO3 - ) reduction reaction (NO3 - RR) is being explored as a promising strategy for green to synthesize industrial-scale NH3 , which has nonetheless involved complex multi-reaction process. This work presents a Pd-doped Co3 O4 nanoarray on titanium mesh (Pd-Co3 O4 /TM) electrode for highly efficient and selective electrocatalytic NO3 - RR to NH3 at low onset potential. The well-designed Pd-Co3 O4 /TM delivers a large NH3 yield of 745.6 µmol h-1 cm-2 and an extremely high Faradaic efficiency (FE) of 98.7% at -0.3 V with strong stability. These calculations further indicate that the doping Co3 O4 with Pd improves the adsorption characteristic of Pd-Co3 O4 and optimizes the free energies for intermediates, thereby facilitating the kinetics of the reaction. Furthermore, assembling this catalyst in a Zn-NO3 - battery realizes a power density of 3.9 mW cm-2 and an excellent FE of 98.8% for NH3 .

High-Efficiency Electroreduction of Nitrite to Ammonia on Ni Nanoparticles Strutted 3D Honeycomb-Like Porous Carbon Framework.

Electroreduction of nitrite (NO2 - ) to ammonia (NH3 ) provides a sustainable approach to yield NH3 , whilst eliminating NO2 - contaminants. In this study, Ni nanoparticles strutted 3D honeycomb-like porous carbon framework (Ni@HPCF) is fabricated as a high-efficiency electrocatalyst for selective reduction of NO2 - to NH3 . In 0.1 M NaOH with NO2 - , such Ni@HPCF electrode obtains a significant NH3 yield of 12.04 mg h-1 mgcat. -1 and a Faradaic efficiency of 95.1 %. Furthermore, it exhibits good long-term electrolysis stability.

Ruthenium doping: An effective strategy for boosting nitrite electroreduction to ammonia over titanium dioxide nanoribbon array.

Electrochemical reduction of nitrite (NO2-) not only removes NO2- contaminant but also produces high-added value ammonia (NH3). This process, however, needs efficient and selective catalysts for NO2--to-NH3 conversion. In this study, Ruthenium doped titanium dioxide nanoribbon array supported on Ti plate (Ru-TiO2/TP) is proposed as an efficient electrocatalyst for the reduction of NO2- to NH3. When operated in 0.1 M NaOH containing NO2-, such Ru-TiO2/TP achieves an ultra-large NH3 yield of 1.56 mmol h-1 cm-2 and a super-high Faradaic efficiency of 98.9%, superior to its TiO2/TP counterpart (0.46 mmol h-1 cm-2, 74.1%). Furthermore, the reaction mechanism is studied by theoretical calculation.

Improved Alkaline Seawater Splitting of NiS Nanosheets by Iron Doping.

Seawater electrolysis driven by renewable electricity is deemed a promising and sustainable strategy for green hydrogen production, but it is still formidably challenging. Here, we report an iron-doped NiS nanosheet array on Ni foam (Fe-NiS/NF) as a high-performance and stable seawater splitting electrocatalyst. Such Fe-NiS/NF catalyst needs overpotentials of only 420 and 270 mV at 1000 mA cm-2 for the oxygen evolution reaction and hydrogen evolution reaction in alkaline seawater, respectively. Furthermore, its two-electrode electrolyzer needs a cell voltage of 1.88 V for 1000 mA cm-2 with 50 h of long-term electrochemical durability in alkaline seawater. Additionally, in situ electrochemical Raman and infrared spectroscopy were employed to detect the reconstitution process of NiOOH and the generation of oxygen intermediates under reaction conditions.

Highly efficient activation of peroxymonosulfate by biomass juncus derived carbon decorated with cobalt nanoparticles for the degradation of ofloxacin.

The cobalt nanoparticles decorated biomass Juncus derived carbon (Co@JDC) was prepared by facile calcination strategy and applied to activate peroxymonosulfate (PMS) for eliminating ofloxacin (OFX) in the water environment. The results of catalytic experiments show that 97% of OFX degradation efficiency and 70.4% of chemical oxygen demand removal rate are obtained within 24 min at 0.1 g L-1 Co@JDC, 0.2 g L-1 PMS, 20 mg L-1 OFX (100 mL), and pH = 7, which indicates that Co@JDC/PMS system exhibits excellent performance. Meanwhile, the experimental results of affect factor show that Co@JDC/PMS system can operate in a wider pH range (3-9) and Cl-1, NO3-1, and SO42- have an ignorable effect on OFX degradation. The radical identification experiments confirm that SO4˙-, ·OH, O2˙-, and 1O2 are involved in the process of PMS activation, especially SO4˙- and 1O2 are the main contributors. Furthermore, a possible PMS activation mechanism by Co@JDC was proposed and the degradation pathways of OFX were deduced. Finally, the stable catalytic activity, negligible leaching of Co2+, and the outstanding degradation efficiency for other antibiotics prove that Co@JDC possesses good stability and universality.

High-Efficiency Ammonia Electrosynthesis on Anatase TiO2-x Nanobelt Arrays with Oxygen Vacancies by Selective Reduction of Nitrite.

Electrocatalytic reduction of nitrite to NH3 provides a new route for the treatment of nitrite in wastewater, as well as an attractive alternative to NH3 synthesis. Here, we report that an oxygen vacancy-rich TiO2-x nanoarray with different crystal structures self-supported on the Ti plate can be prepared by hydrothermal synthesis and by subsequently annealing it in an Ar/H2 atmosphere. Anatase TiO2-x (A-TiO2-x) can be a superb catalyst for the efficient conversion of NO2- to NH3; a high NH3 yield of 12,230.1 ± 406.9 µg h-1 cm-2 along with a Faradaic efficiency of 91.1 ± 5.5% can be achieved in a 0.1 M NaOH solution containing 0.1 M NaNO2 at -0.8 V, which also exhibits preferable durability with almost no decay of catalytic performances after cycling tests and long-term electrolysis. Furthermore, a Zn-NO2- battery with such A-TiO2-x as a cathode delivers a power density of 2.38 mW cm-2 as well as a NH3 yield of 885 µg h-1 cm-2.

High-Efficiency Electrosynthesis of Ammonia with Selective Reduction of Nitrate in Neutral Media Enabled by Self-Supported Mn2CoO4 Nanoarray.

Ambient ammonia synthesis by electroreduction of nitrate (NO3-) provides us a sustainable and environmentally friendly alternative to the traditional Haber-Bosch process. In this work, Mn2CoO4 nanoarray grown on carbon cloth (Mn2CoO4/CC) serves as a superior electrocatalyst for efficient NH3 synthesis by selective reduction of NO3-. When operated in 0.1 M PBS with 0.1 M NaNO3, Mn2CoO4/CC reaches a high Faraday efficiency of 98.6% and a large NH3 yield up to 11.19 mg/h/cm2. Moreover, it exhibits excellent electrocatalytic stability. Theory calculations show that the Mn2CoO4 surface has strong interaction with NO3-, which can effectively inhibit the occurrence of hydrogen evolution, beneficial for NO3--to-NH3 conversion.

Valorization of Rice Husk and Straw Agriculture Wastes of Eastern Saudi Arabia: Production of Bio-Based Silica, Lignocellulose, and Activated Carbon.

Bio-based silica, lignocellulose, and activated carbon were simply produced via the recycling of Hassawi rice biomass waste of Al-Ahsa governorate in the eastern Saudi Arabia region using a fast chemical treatment procedure. Rice husk and rice straw wastes were collected, ground, and chemically treated with sodium hydroxide to extract silica/silicate from the dried plant tissues. The liquid extract is then treated with acid solutions in order to precipitate silica/silicate at neutral medium. Lowering the pH of the supernatant to 2 resulted in the precipitation of lignocellulose. Thermal treatment of the biomass residue under N2 gas stream resulted in activated carbon production. Separated products were dried/treated and characterized using several physical examination techniques, such as FT-IR, SEM/EDX, XRD, and Raman spectroscopy in order to study their structure and morphology. Silica and lignocelluloses products were then preliminarily used in the treatment of wastewaters and water-desalination processes.

Cu nanoparticles decorated juncus-derived carbon for efficient electrocatalytic nitrite-to-ammonia conversion.

Electrocatalytic nitrite reduction to value-added NH3 can simultaneously achieve sustainable ammonia production and N-contaminant removal in natural environments, which has attracted widespread attention but still lacks efficient catalysts. In this work, Cu nanoparticles decorated juncus-derived carbon can be proposed as a high-active electrocatalyst for NO2--to-NH3 conversion, obtaining a high Faradaic efficiency of 93.2% and a satisfactory NH3 yield of 523.5 µmol h-1 mgcat.-1. Density functional theory calculations were applied to uncover insightful understanding of internal catalytic mechanism.

Cytotoxic Potential of Bio-Silica Conjugate with Different Sizes of Silver Nanoparticles for Cancer Cell Death.

Well-defined silver nanoparticles were doped into bio-based amorphous silica (Ag-b-SiO2) with different silver contents (from 2 to 20 wt%) by a solvent-free procedure. The four as-synthetized samples were hydrogenated at 300 °C to ensure the formation of zero-valent Ag nanoparticles. The prepared samples were characterized by X-ray powder diffraction (XRD), elemental analysis, N2 sorption measurements, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy (HR-TEM). The characterization data confirmed the formation of well-defined zero-valent silver nanoparticles in the range of 3-10 nm in the low-loading samples, while in high-loading samples, bulky particles of silver in the range of 200-500 nm were formed. The in vitro cytotoxic activities of the Ag-b-SiO2 samples were tested against the tumor cell lines of breast (MCF-7), liver (HepG2), and colon (HCT 116) over a concentration range of 0.01 to 1000 g. The prepared samples exhibited a wide range of cytotoxic activities against cancer cells. An inverse relationship was observed between the silver nanoparticles' size and the cytotoxic activity, while a direct relationship between the silver nanoparticles' size and the apoptotic cell death was noticed.

Efficient Oxidation of Cyclohexane over Bulk Nickel Oxide under Mild Conditions.

Nickel oxide powder was prepared by simple calcination of nickel nitrate hexahydrate at 500 °C for 5 h and used as a catalyst for the oxidation of cyclohexane to produce the cyclohexanone and cyclohexanol-KA oil. Molecular oxygen (O2), hydrogen peroxide (H2O2), t-butyl hydrogen peroxide (TBHP) and meta-chloroperoxybenzoic acid (m-CPBA) were evaluated as oxidizing agents under different conditions. m-CPBA exhibited higher catalytic activity compared to other oxidants. Using 1.5 equivalent of m-CPBA as an oxygen donor agent for 24 h at 70 °C, in acetonitrile as a solvent, NiO powder showed exceptional catalytic activity for the oxidation of cyclohexane to produce KA oil. Compared to different catalytic systems reported in the literature, for the first time, about 85% of cyclohexane was converted to products, with 99% KA oil selectivity, including around 87% and 13% selectivity toward cyclohexanone and cyclohexanol, respectively. The reusability of NiO catalyst was also investigated. During four successive cycles, the conversion of cyclohexane and the selectivity toward cyclohexanone were decreased progressively to 63% and 60%, respectively, while the selectivity toward cyclohexanol was increased gradually to 40%.

Nitrite reduction over Ag nanoarray electrocatalyst for ammonia synthesis.

Electrochemical reduction of nitrite to ammonia can simultaneously achieve ammonia synthesis and N-contaminant removal under mild conditions, which has attracted widespread attention but still lacks efficient catalysts. In this work, Ag nanoarray using NiO nanosheets array on carbon cloth as support is reported as an efficient electrocatalyst to selectively reduce nitrite to ammonia. In 0.1 M NaOH with 0.1 M NO2-, such catalyst exhibits a maximum ammonia yield of 5,751 µg h-1 cm-2 (57,510 µg h-1 mgAg-1) and high Faradaic efficiency up to 97.7 %. Density functional theory calculations applied to uncover the catalytic mechanism of NO2- reduction reaction on Ag.

Co-NCNT nanohybrid as a highly active catalyst for the electroreduction of nitrate to ammonia.

Electrocatalytic nitrate (NO3-) reduction has emerged as an attractive dual-function strategy to produce ammonia (NH3) and simultaneously mitigate environmental issues. However, efficient electrocatalysts with high selectivity for NH3 synthesis are highly desired. In this work, we report the Co-NCNT nanohybrid as a highly active electrocatalyst towards NO3--to-NH3 conversion. In 0.1 M NaOH solution containing 0.1 M NO3-, the Co-NCNT catalyst is capable of attaining a large NH3 yield of 5996 µg h-1 cm-2 and a high faradaic efficiency of 92% at -0.6 V versus reversible hydrogen electrode. Moreover, it displays excellent electrochemical stability.

Co nanoparticle-decorated pomelo-peel-derived carbon enabled high-efficiency electrocatalytic nitrate reduction to ammonia.

Electrocatalytic nitrate reduction is a sustainable approach to produce ammonia and remediate water pollutant nitrate. Here, we show that Co nanoparticle-decorated pomelo-peel-derived carbon is an efficient electrocatalyst for nitrate reduction to ammonia with a faradaic efficiency of 90.1% and a yield of 1.1 mmol h-1 mgcat.-1.

A FeCo2O4 nanowire array enabled electrochemical nitrate conversion to ammonia.

Electrocatalytic nitrate (NO3-) reduction not only generates high-value ammonia (NH3) but holds significant potential in the control of NO3- contaminants in natural environments. Here, a bimetallic FeCo2O4 spinel nanowire array grown on carbon cloth is proposed as an efficient electrocatalyst for the conversion of NO3- to NH3 with a high faradaic efficiency of up to 95.9% and a large NH3 yield of 4988 µg h-1 cm-2. Furthermore, it also exhibits excellent stability during 16 h electrolysis.