RESUMEN
The authors have developed a simple device for computer-aided design/computer-aided manufacturing (CAD-CAM) that uses an image-guided system to define a cutting tool path that is shared with a surgical machining system for drilling bone. Information from 2D images (obtained via CT and MRI) is transmitted to a processor that produces a 3D image. The processor generates code defining an optimized cutting tool path, which is sent to a surgical machining system that can drill the desired portion of bone. This tool has applications for bone removal in both cranial and spine neurosurgical approaches. Such applications have the potential to reduce surgical time and associated complications such as infection or blood loss. The device enables rapid removal of bone within 1 mm of vital structures. The validity of such a machining tool is exemplified in the rapid (< 3 minutes machining time) and accurate removal of bone for transtemporal (for example, translabyrinthine) approaches.
Asunto(s)
Diseño Asistido por Computadora/instrumentación , Diseño de Prótesis/instrumentación , Base del Cráneo/cirugía , Humanos , Procesamiento de Imagen Asistido por Computador/instrumentación , Imagenología Tridimensional/instrumentación , Imagenología Tridimensional/métodosRESUMEN
BACKGROUND: One potential mechanism for early superficial cartilage wear in normal joints is alteration of the lubricant content and quality of synovial fluid. The purpose of this study was to determine if the concentration and quality of the lubricant, hyaluronan, in synovial fluid: (1) was similar in left and right knees; (2) exhibited similar age-associated trends, whether collected postmortem or antemortem; and (3) varied with age and grade of joint degeneration. METHODS: Human synovial fluid of donors (23-91 years) without osteoarthritis was analyzed for the concentrations of protein, hyaluronan, and hyaluronan in the molecular weight ranges of 2.5-7 MDa, 1-2.5 MDa, 0.5-1 MDa, and 0.03-0.5 MDa. Similarity of data between left and right knees was assessed by reduced major axis regression, paired t-test, and Bland-Altman analysis. The effect of antemortem versus postmortem collection on biochemical properties was assessed for age-matched samples by unpaired t-test. The relationships between age, joint grade, and each biochemical component were assessed by regression analysis. RESULTS: Joint grade and the concentrations of protein, hyaluronan, and hyaluronan in the molecular weight ranges of 2.5-7 MDa, 1-2.5 MDa, and 0.5-1 MDa in human synovial fluid showed good agreement between left and right knees and were similar between age-matched patient and cadaver knee joints. There was an age-associated decrease in overall joint grade (-15 %/decade) and concentrations of hyaluronan (-10.5 %/decade), and hyaluronan in the molecular weight ranges of 2.5-7 MDa (-9.4 %/decade), 1-2.5 MDa (-11.3 %/decade), 0.5-1 MDa (-12.5 %/decade), and 0.03-0.5 MDa (-13.0 %/decade). Hyaluronan concentration and quality was more strongly associated with age than with joint grade. CONCLUSIONS: The age-related increase in cartilage wear in non-osteoarthritic joints may be related to the altered hyaluronan content and quality of synovial fluid.
Asunto(s)
Envejecimiento/metabolismo , Enfermedades de los Cartílagos/metabolismo , Cartílago Articular/metabolismo , Ácido Hialurónico/metabolismo , Articulación de la Rodilla/metabolismo , Líquido Sinovial/metabolismo , Adulto , Anciano , Anciano de 80 o más Años , Envejecimiento/patología , Enfermedades de los Cartílagos/patología , Cartílago Articular/patología , Femenino , Humanos , Ácido Hialurónico/análisis , Articulación de la Rodilla/patología , Masculino , Persona de Mediana Edad , Líquido Sinovial/química , Adulto JovenRESUMEN
BACKGROUND: Osteochondral allograft (OCA) transplantation is an effective treatment for defects in the medial femoral condyle (MFC), but the procedure is limited by a shortage of grafts. Lateral femoral condyles (LFCs) differ in geometry from MFCs but may be a suitable graft source. The difference between articular surface locations of the knee can be evaluated with micro-computed tomography imaging and 3-dimensional image analysis. HYPOTHESIS: LFC OCAs inserted into MFC lesions can provide a cartilage surface match comparable with those provided by MFC allografts. STUDY DESIGN: Controlled laboratory study. METHODS: Twenty MFCs and 10 LFCs were divided into 3 groups: 10 MFC recipients (MFCr), 10 MFC donors (MFCd), and 10 LFC donors (LFCd). A 20-mm defect was created in the weightbearing portion of the MFCr. Two grafts, 1 MFCd and 1 LFCd, were implanted sequentially into each MFCr. Micro-computed tomography (µCT) images of the MFCr were acquired and analyzed to compare the topography of the original recipient site with the MFCd- and LFCd-repaired sites. Three-dimensional transformations were defined to register the defect site in the 3 scans of each MFCr. Vertical deviations from each voxel of the graft cartilage surface, relative to the intact recipient cartilage surface, were calculated and assessed as root mean square deviation and percentage graft area that was proud, sunk, and within the "acceptable" distance (±1.00 mm). The effect of repair (with MFC vs with LFC) on each of the surface match parameters is presented as mean ± SD and was assessed by t test: height deviation over area (root mean square, mm), graft area acceptable (%), area unacceptably proud (%), area unacceptably sunk (%), step-off height over circumference (root mean square, mm), graft circumference acceptable (%), circumference unacceptably proud (%), and circumference unacceptably sunk (%). Percentage data were arcsin transformed before statistical testing. An alpha level of 0.05 was used to conclude if variations were statistically significant. RESULTS: MFCr defects were filled with both orthotopic MFCd and nonorthotopic LFCd. Registered µCT images of the MFCr illustrate the cartilage surface contour in the sagittal and coronal planes, in the original intact condyle, as well as after OCA repairs. Specimen-specific surface color maps for the MFCr after implant of the MFCd and after implant of LFCd were generally similar, with some deviation near the edges. On average, the MFCr site exhibited a typical contour, and the MFCd and LFCd were slightly elevated. Both types of OCA-MFCd and LFCd-matched well, showing overall height deviations of 0.63 mm for area and 0.47 mm for step-off, with no significant difference between MFCd and LFCd (P = .92 and .57, respectively) and acceptable deviation based on area (87.6% overall) and step-off (96.7% overall), with no significant difference between MFCd and LFCd (P = .87 and .22, respectively). A small portion of the implant was proud (12.1% of area and 2.6% of circumference step-off height), with no significant difference between MFCd and LFCd (P = .26 and .27, respectively). A very small portion of the implant area and edge was sunk (0.3% of area and 0.6% of circumference), with no significant difference between MFCd and LFCd (P = .29 and .86, respectively). CONCLUSION/CLINICAL RELEVANCE: The achievement of excellent OCA surface match with an MFCd or LFCd graft into the common MFCr site suggests that nonorthotopic LFC OCAs are acceptable graft options for MFC defects.
Asunto(s)
Fémur/trasplante , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/cirugía , Microtomografía por Rayos X , Aloinjertos , Cadáver , Cartílago/trasplante , Humanos , Interpretación de Imagen Radiográfica Asistida por Computador , Sitio Donante de Trasplante , Soporte de PesoRESUMEN
OBJECTIVE: The residence time of hyaluronan (HA) in knee joint synovial fluid (SF) was investigated using a rabbit anterior cruciate ligament transection (ACLT) model. The aims of this study were to assess, at 7 and 28 days after surgery, the 1) HA concentration and molecular mass (M(r) ) distribution in the SF, 2) endogenous replenishment of HA after saline washout, 3) HA residence times in the SF, and 4) synovium and subsynovium cellularity of the knee joints of rabbits subjected to ACLT, compared to sham-operated and nonoperated control joints. METHODS: Adult NZW rabbits underwent ACLT or sham surgery on one hind limb, while each contralateral limb was the nonoperated control. On day 7 or 28 after surgery, the joints were aspirated for SF, lavaged with saline, and injected with saline or polydisperse HA, and samples were obtained for analysis at set time points up to 8 hours after injection. Joint fluid samples were analyzed for the concentration and M(r) distribution of HA to calculate the HA residence time constant. RESULTS: Analysis of HA concentrations and M(r) distributions showed 1) loss of high-M(r) HA in the SF on day 7 and a shift toward a lower-M(r) distribution on day 28, 2) endogenous replenishment of high-M(r) HA after washout, and 3) M(r) -dependent loss of HA from the knee joints after ACLT, particularly on day 7 postsurgery. The HA residence time decreased with decreasing HA M(r) (residence time â¼27 hours with an M(r) load of 7,000-2,500 kd, to â¼7 hours with an M(r) load of 250-50 kd). HA residence time also decreased (by â¼70%) in the knee joints on day 7 after ACLT. The subsynovium of the joints subjected to ACLT displayed increased cellularity and neovascularization on days 7 and 28 postsurgery. CONCLUSION: The residence time of HA in the SF is transiently decreased after ACLT, suggesting that a biophysical transport mechanism is responsible for the altered composition of the SF after joint injury or during inflammation.
Asunto(s)
Ligamento Cruzado Anterior/cirugía , Fenómenos Biofísicos/fisiología , Ácido Hialurónico/metabolismo , Articulación de la Rodilla/cirugía , Líquido Sinovial/metabolismo , Animales , Fenómenos Biomecánicos , Modelos Animales , Periodo Posoperatorio , Conejos , Membrana Sinovial/metabolismo , Membrana Sinovial/patología , Factores de TiempoRESUMEN
Synovial fluid (SF) is a viscous ultrafiltrate of plasma that lubricates articulating joint motion. During acute trauma and certain cartilage repair procedures, blood is introduced into the joint and mixes with variable amounts of SF. The hypothesis of this study was that the dilution of blood with SF alters the rheological properties of the blood and the mechanical properties of the clot formed. The objectives were to determine the composition (solid fraction, protein content), coagulation (fibrin polymerization time, torsional strength), and mechanical (stiffness, permeability) properties of mixtures of blood with 10% or 50%SF.While the initial stages of coagulation of blood were not markedly affected by the presence of the SF, dilution with SF altered the coagulation torque profile over time, decreased the final clot structure mechanical stiffness (4290% decrease), and increased the fluid permeability of the clots (41- to 468-fold). Compared to diluting blood with PBS, SF had a smaller effect on the mechanical properties of the clot, possibly due to the presence of high molecular weight hyaluronan. These properties of blood/SF mixtures may facilitate an understanding of the repair environment in the joint and of mechanisms of cartilage repair.