RESUMEN
The use of renewable sources for energy has increased due to the high demand of modern society and the environmental impacts caused by the use of fossil fuels. Environmentally friendly renewable energy production may involve thermal processes, including the application of biomass. We provide a comprehensive chemical characterization of sludges from domestic and industrial effluent treatment stations, as well as the bio-oils produced by fast pyrolysis. A comparative study of the sludges and the corresponding pyrolysis oils was performed, with characterization of the raw materials using thermogravimetric analysis, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, elemental analysis, and inductively coupled plasma optical emission spectrometry. The bio-oils were characterized using comprehensive two-dimensional gas chromatography/mass spectrometry that identified compounds classified according to their chemical class, mainly related to nitrogenous (62.2%) and ester (18.9%) for domestic sludge bio-oil, and nitrogenous (61.0%) and ester (27.6%) for industrial sludge bio-oil. The Fourier transform ion cyclotron resonance mass spectrometry revealed a broad distribution of classes with oxygen and/or sulfur (N2O2S, O2, and S2 classes). Nitrogenous compounds (N, N2, N3, and NxOxclasses) were also found to be abundant in both bio-oils, due to the origins of the sludges (with the presence of proteins), making these bio-oils unsuitable for use as renewable fuels, since NOxgases could be released during combustion processes. The presence of functionalized alkyl chains indicated the potential of the bio-oils as sources of high added-value compounds that could be obtained by recovery processes and used for the manufacture of fertilizers, surfactants, and nitrogen solvents.
Asunto(s)
Pirólisis , Aguas del Alcantarillado , Calor , Aceites/química , Aceites de Plantas/química , Nitrógeno/análisis , Oxígeno , Biocombustibles/análisisRESUMEN
Lychnophora pinaster, known as arnica-mineira, is endemic to campos rupestres, at risk of extinction. The present study aimed to characterize the ecogeography and phenolic constituents of 11 L. pinaster populations collected in the mesoregions North, Jequitinhonha, Metropolitan of Belo Horizonte and Campos das Vertentes in the state of Minas Gerais, Brazil. Phenolic constituents were identified and quantified by Ultra-high performance liquid chromatography- mass spectrometry. Lychnophora pinaster occurs in sites at high altitude (700 and 1498 m), annual rainfall of up to 1455 m, soils with low fertility and predominantly loamy texture. Therefore, it can be considered tolerant to acidic soils, with low availability of nutrient. The most abundant substances in all populations were vitexin (18 - 1345 ng/g) and chlorogenic acid (60 - 767 ng/g). The 11 populations formed four groups in relation to the phenolic constituents, with group 1 consisting of the populations of the North Mesoregion (GM, OD) and Jetiquinhonha (DIMa), group 2, the Metropolitan of Belo Horizonte (SRM, NLSC, SM, RPS, CTRA), group 3, the North Mesoregion (ODMa and DI), and group 4, the Campos das Vertentes (CC). Among the populations, only those from the Metropolitan of Belo Horizonte showed correlation of soil properties with phenolic constituents.
Asunto(s)
Arnica , Asteraceae , Brasil/epidemiología , Extractos Vegetales , SueloRESUMEN
Naphthenic acids (NAs) are compounds naturally present in most petroleum sources comprised of complex mixtures with a highly variable composition depending on their origin. Their occurrence in crude oil can cause severe corrosion problems and catalysts deactivation, decreasing oil quality and consequently impacting its productivity and economic value. NAs structures also allow them to behave as surfactants, causing the formation and stabilization of emulsions. In face of the ongoing challenge of treatment of water-in-oil (W/O) or oil-in-water (O/W) emulsions in the oil and gas industry, it is important to understand how NAs act in emulsified systems and which acids are present in the interface. Considering that, this review describes the properties of NAs, their role in the formation and stability of oil emulsions, and the modern analytical methods used for the qualitative analysis of such acids.
RESUMEN
Lychnophora pinaster Mart. (Asteraceae) is endemic to the Brazilian Cerrado. It is distributed along the altitudinal gradient of the mountainous ranges of the state of Minas Gerais. This study aimed to evaluate the influence of altitude on the genetic diversity of L. pinaster populations and the effects of altitude and climatic factors on essential oil chemical composition. Essential oils from L. pinaster populations from the north (North 01, North 02, and North 03, 700-859 m) and the Metropolitan region of Belo Horizonte (MhBH 01 and MrBH 02, 1366-1498 m) were analyzed. SNP markers from L. pinaster in these regions and Campos das Vertentes (CV 01, CV 02, and CV 03, 1055-1292 m) were also analyzed. The main compounds in essential oils were 14-hydroxy-α-humulene (North 01 and North 03), cedr-8(15)-en-9-α-ol (North 02), 14-acetoxy-α-humulene (MrBH 01), and 4-oxo-15-nor-eudesman-11-ene (MrBH 02). Hierarchical cluster and heatmap analyses showed that the North and MrBH populations included five different groups, indicating the chemical composition of essential oils is distinct in each population. Furthermore, principal component analysis showed that higher altitudes (1366 m and 1498 m) in the MrBH influence the chemical composition of essential oils, and climatic factors determine the chemical composition in North region. The genetic diversity showed that most alleles are in Hardy-Weinberg equilibrium and imply high genetic variation and genetic polymorphisms between populations. Furthermore, the results of Mantel tests (R = 0.3861517; p = 0.04709529; R = 0.9423121; p = 0.02739726) also showed that higher altitude (>1360 m) shapes the genetic diversity at the MrBH. The genetic structure showed that higher altitudes (>1360 m) contribute to the structure of the MrBH populations, but not to North and CV populations. Therefore, the altitudinal ranges of Minas Gerais mountainous ranges determine the higher genetic and chemical diversity of L. pinaster populations.
Asunto(s)
Altitud , Asteraceae , Aceites Volátiles , Aceites de Plantas/química , Asteraceae/química , Asteraceae/genética , Brasil , Genómica , Aceites Volátiles/química , Análisis de Componente PrincipalRESUMEN
Comprehensive two-dimensional gas chromatography (GC×GC) has been an important technique used to acquire as much information as possible from a wide variety of samples. Qualitative contour plots analysis provides useful information and in daily use it ends up being handled as images of the volatile organic compounds by analysts. Cachaça samples are used in this paper to showcase the use of two-dimensional chromatographic images as the main source for authentication purposes through one-class classifiers, such as data-driven soft independent modeling of class analogy (DD-SIMCA). The proposed workflow summarizes this fast and easy process, which can be used to certify a specific brand in comparison to other brands, as well as to authenticate if samples have been adulterated. Lower quality cachaças, non-aged cachaças and cachaças aged in different wooden barrels were tested as adulterants. Chromatographic images allowed for the distinction of all brands and nearly every adulteration tested. Sensitivity was estimated at 100% for all models and specificity ranged from 96% to 100%. Different approaches were used, alternating from working with whole-sized images to working with smaller resized versions of those images. Resized chromatographic images could be potentially useful to easily compensate for slight chromatographic misalignments, allowing for faster calculations and the use of simpler software. Reductions to 50% and 25% of the original size were tested and the results did not greatly differ from whole images model. As such, 2D chromatographic images have been found to be an interesting form of evaluating a product's authenticity.
Asunto(s)
Compuestos Orgánicos Volátiles , Cromatografía de Gases , Cromatografía de Gases y Espectrometría de Masas , Compuestos Orgánicos Volátiles/análisisRESUMEN
The purpose of this corrigendum is to present the correct silyl-acceptor reactivity order.
RESUMEN
In this article we describe a method using flow-modulated comprehensive two-dimensional gas chromatography with electron capture detector (FM-GC×GC-ECD) for the determination of polychlorinated biphenyls (PCBs) in complex transformer oils bypassing the need for sample preparation. A two-fold improvement in method development was attained. First, the solvation parameter model (SPM) was used to guide column selection. A highly cohesive ionic liquid-based phase (low l system constant), namely 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide, was used in the primary stage leading to negligible retention of interfering aliphatic hydrocarbons, which are eluted in the first upper quadrant of the chromatogram. The resulting separation space was used to resolve the critical class of compounds, namely, PCBs and polyaromatic hydrocarbons. Second, a unique combination of column geometries and phase ratios enabled highly efficient reverse fill/flush flow modulation using very low pressure for auxiliary gas flow. The proof of concept method described herein exhibited linearities ranging from 0.990 to 0.994, limits of quantitation (LOQ) from 2.23 and 6.85⯵g mL-1, precision below 5% relative standard deviation (RSD), and accuracy from 84.2% to 108.9% showcasing the potential of FM-GC×GC for routine analysis.
Asunto(s)
Cromatografía de Gases/métodos , Aceites/química , Bifenilos Policlorados/análisis , Reproducibilidad de los ResultadosRESUMEN
This manuscript describes the development of wall-coated open tubular capillary column with polymeric ionic liquids (PILs) for on-line in-tube solid phase microextraction coupled with ultra high-performance liquid chromatography tandem mass spectrometry (in-tube SPME/UHPLC-MS/MS) to determine anandamide (AEA) and 2-arachidonoyl glycerol (2â¯Aâ¯G) in plasma samples. Selective PILs were synthetized from the [VC6IM][Cl], [VC16IM][Br], and [(VIM)2C10]2 [Br] - ionic liquids - by in-situ thermal-initiated polymerization in a fused silica capillary column for in-tube SPME. The synthesis procedure was optimized, and the capillary columns were characterized using spectroscopic and chromatography techniques. The chemically bonded and cross-linked PIL-based sorbent phase (thickness coating: 1.7⯵m) presented high chemical and mechanical stability. Among the sorbents evaluated, the PIL-based capillary, [VC16IM][Br]/[(VIM)2C10]2 [Br] presented the best performance with a sorption capacity of 37,311â¯ngâ¯cm-3 and 48,307â¯ngâ¯cm-3 for AEA and 2â¯Aâ¯G, respectively. This capillary was reused more than ninety times without significant changes in extraction efficiency. The in-tube SPME-UHPLC-MS/MS method presented a linear range from 0.1â¯ngâ¯mL-1 to 100â¯ngâ¯mL-1 for AEA, and from 0.05â¯ngâ¯mL-1 to 100â¯ngâ¯mL-1 for 2â¯Aâ¯G, with coefficients of determination higher than 0.99, p-value for Lack-of-fit test higher than 0.05 (α of 0.05), precision with coefficient of variation (CV) values ranging from 1.6 to 14.0% and accuracy with relative standard deviation (RSD) values from -19.6% to 13.2%. This method was successfully applied to determine AEA and 2â¯Aâ¯G in plasma patients with Parkinson's disease. The concentrations in these plasma samples ranged from 0.14 to 0.46â¯ngâ¯mL-1 for AEA and from <0.05â¯ngâ¯mL-1 to 0.51â¯ngâ¯mL-1 for 2-AG.
Asunto(s)
Endocannabinoides/sangre , Endocannabinoides/química , Líquidos Iónicos/química , Polímeros/química , Microextracción en Fase Sólida , Cromatografía Líquida de Alta Presión , Humanos , Estructura Molecular , Espectrometría de Masas en TándemRESUMEN
Microextractions have become an attractive class of techniques for metabolomics. The most popular technique is solid-phase microextraction that revolutionized the field of modern sample preparation in the early nineties. Ever since this milestone, microextractions have taken on many principles and formats comprising droplets, fibers, membranes, needles, and blades. Sampling devices may be customized to impart exhaustive or equilibrium-based characteristics to the extraction method. Equilibrium-based approaches may rely on additional methods for calibration, such as diffusion-based or on-fiber kinetic calibration to improve bioanalysis. In addition, microextraction-based methods may enable minimally invasive sampling protocols and measure the average free concentration of analytes in heterogeneous multiphasic biological systems. On-fiber derivatization has evidenced new opportunities for targeted and untargeted analysis in metabolomics. All these advantages have highlighted the potential of microextraction techniques for in vivo and on-site sampling and sample preparation, while many opportunities are still available for laboratory protocols. In this review, we outline and discuss some of the most recent applications using microextractions techniques for comprehensive two-dimensional gas chromatography-based metabolomics, including potential research opportunities.
Asunto(s)
Líquidos Iónicos/metabolismo , Metabolómica , Microextracción en Fase Sólida , Cromatografía de Gases y Espectrometría de Masas , Líquidos Iónicos/química , Líquidos Iónicos/aislamiento & purificaciónRESUMEN
In this study, a series of polymeric ionic liquid (PIL) sorbent coatings is evaluated for the extraction of polar volatile organic compounds (VOCs) from Brazilian wines using headspace solid-phase microextraction (HS-SPME), including samples from 'Isabella' and 'BRS Magna' cultivars-the latter was recently introduced by the Brazilian Agricultural Research Corporation - National Grape & Wine Research Center. The structurally tuned SPME coatings were compared to the commercial SPME phases, namely poly(acrylate) (PA) and divinylbenzene/carboxen/poly(dimethylsiloxane) (DVB/CAR/PDMS). The separation, detection and identification of the aroma profiles were obtained using comprehensive two-dimensional gas chromatography mass spectrometry (GC×GC-MS). The best performing PIL-based SPME fiber, namely 1-hexadecyl-3-vinylimidazolium bis[(trifluoromethyl)sulfonyl]imide with 1,12-di(3-vinylimidazolium)dodecane dibis[(trifluoromethyl)sulfonyl]imide incorporated cross-linker supported on an elastic nitinol wire, exhibited superior performance to DVB/CAR/PDMS regarding the average number of extracted peaks and extracted more polar analytes providing additional insight into the aroma profile of 'BRS Magna' wines. Four batches of wine were evaluated, namely 'Isabella' and 'BRS Magna' vintages 2015 and 2016, using highly selective PIL-based SPME coatings and enabled the detection of 350+ peaks. Furthermore, this is the first report evaluating the aroma of 'BRS Magna' wines. A hybrid approach that combined pixel-based Fisher ratio and peak table-based data comparison was used for data handling. This proof-of-concept experiment provided reliable and statistically valid distinction of wines that may guide regulation agencies to create high sample throughput protocols to screen wines exported by Brazilian vintners. Graphical abstract Highly selective extraction of wine aroma using polymeric ionic liquid.
Asunto(s)
Cromatografía de Gases y Espectrometría de Masas/métodos , Líquidos Iónicos/química , Odorantes/análisis , Microextracción en Fase Sólida/métodos , Vino/análisis , Brasil , Análisis Discriminante , Polímeros/químicaRESUMEN
In this study, we introduce a simple protocol to manufacture disposable, 3D-printed microfluidic systems for sample preparation of petroleum. This platform is produced with a consumer-grade 3D-printer, using fused deposition modeling. Successful incorporation of solid-phase extraction (SPE) to microchip was ensured by facile 3D element integration using proposed approach. This 3D-printed µSPE device was applied to challenging matrices in oil and gas industry, such as crude oil and oil-brine emulsions. Case studies investigated important limitations of nonsilicon and nonglass microchips, namely, resistance to nonpolar solvents and conservation of sample integrity. Microfluidic features remained fully functional even after prolonged exposure to nonpolar solvents (20 min). Also, 3D-printed µSPE devices enabled fast emulsion breaking and solvent deasphalting of petroleum, yielding high recovery values (98%) without compromising maltene integrity. Such finding was ascertained by high-resolution molecular analyses using comprehensive two-dimensional gas chromatography and gas chromatography/mass spectrometry by monitoring important biomarker classes, such as C10 demethylated terpanes, ααα-steranes, and monoaromatic steroids. 3D-Printed chips enabled faster and reliable preparation of maltenes by exhibiting a 10-fold reduction in sample processing time, compared to the reference method. Furthermore, polar (oxygen-, nitrogen-, and sulfur-containing) analytes found in low-concentrations were analyzed by Fourier transform ion cyclotron resonance mass spectrometry. Analysis results demonstrated that accurate characterization may be accomplished for most classes of polar compounds, except for asphaltenes, which exhibited lower recoveries (82%) due to irreversible adsorption to sorbent phase. Therefore, 3D-printing is a compelling alternative to existing microfabrication solutions, as robust devices were easy to prepare and operate.
RESUMEN
In this study, we introduce a modulation strategy for comprehensive two-dimensional gas chromatography (GC×GC) by using a simple and consumable-free modulator. This "Do-It-Yourself" interface comprised a 1.0m×0.25mm segment of MTX-5 metallic column and a low-cost DC power supply. Thermal desorption modulation (TDM) was attained using a dual-stage heater-based modulator in a novel segmented-loop configuration. TDM was achieved by alternating analyte trapping and thermal desorption. Former process relied on analyte partition to sorbent phase, while latter explored direct resistive heating. Introduction of an intermediate delay segment between the two stages mitigated analyte breakthrough, improving peak symmetry and chromatographic efficiency. This feature was critical to acquire reliable GC×GC modulation using such simple heater-based device. The effects of important modulation variables on 2D separations were investigated, including TDM stage length, dimension of delay loop, and outlet pressure. Significant advances and limitations of proposed TDM strategy were carefully determined. Proposed GC×GC prototype by using an in-oven TDM modulator was successfully applied to a series of challenging matrices, including petroleum distillates, biodiesel, and essential oil. This open-hardware, cost-effective modulator was easy to install and operate, as it circumvented the need for sophisticated components (e.g. moving parts and cooling systems). Therefore, our modulator is a compelling alternative to existing GC×GC solutions to operate in resource-limited laboratories.
RESUMEN
A series of dicationic ionic liquid (IL)-based stationary phases were evaluated as secondary columns in comprehensive two-dimensional gas chromatography (GC×GC) for the separation of aliphatic hydrocarbons from kerosene. In order to understand the role that structural features of ILs play on the selectivity of nonpolar analytes, the solvation parameter model was used to probe the solvation properties of the IL-based stationary phases. It was observed that room temperature ILs containing long free alkyl side chain substituents and long linker chains between the two cations possess less cohesive forces and exhibited the highest resolution of aliphatic hydrocarbons. The anion component of the IL did not contribute significantly to the overall separation, as similar selectivities toward aliphatic hydrocarbons were observed when examining ILs with identical cations and different anions. In an attempt to further examine the separation capabilities of the IL-based GC stationary phases, columns of the best performing stationary phases were prepared with higher film thickness and resulted in enhanced selectivity of aliphatic hydrocarbons.
Asunto(s)
Cromatografía de Gases , Líquidos Iónicos/química , Cromatografía de Gases/instrumentación , Iones/química , Queroseno/análisis , Modelos Teóricos , TemperaturaRESUMEN
Super elastic nitinol (NiTi) wires were exploited as highly robust supports for three distinct crosslinked polymeric ionic liquid (PIL)-based coatings in solid-phase microextraction (SPME). The oxidation of NiTi wires in a boiling (30%w/w) H2O2 solution and subsequent derivatization in vinyltrimethoxysilane (VTMS) allowed for vinyl moieties to be appended to the surface of the support. UV-initiated on-fiber copolymerization of the vinyl-substituted NiTi support with monocationic ionic liquid (IL) monomers and dicationic IL crosslinkers produced a crosslinked PIL-based network that was covalently attached to the NiTi wire. This alteration alleviated receding of the coating from the support, which was observed for an analogous crosslinked PIL applied on unmodified NiTi wires. A series of demanding extraction conditions, including extreme pH, pre-exposure to pure organic solvents, and high temperatures, were applied to investigate the versatility and robustness of the fibers. Acceptable precision of the model analytes was obtained for all fibers under these conditions. Method validation by examining the relative recovery of a homologous group of phthalate esters (PAEs) was performed in drip-brewed coffee (maintained at 60 °C) by direct immersion SPME. Acceptable recoveries were obtained for most PAEs in the part-per-billion level, even in this exceedingly harsh and complex matrix.
RESUMEN
Solid-phase microextraction (SPME) using cross-linked polymeric ionic liquid (PIL)-based sorbent coatings was used to extract volatile aroma-related compounds from coffee samples. Several PIL-based coatings were screened alongside a commercial poly(acrylate) (PA) SPME coating. The best performing PIL-based SPME fiber, poly(1-vinyl-3-hexadecylimidazolium bis[(trifluoromethyl)sulfonylimide]) with 50% (w/w) 1,12-di(3-vinylbenzylimidazolium)dodecane dibis[(trifluoromethyl)sulfonyl]imide incorporated cross-linker, was used to isolate the volatile fraction of Arabica coffee. To illustrate the importance of trace analyte isolation, a method for the detection and quantification of coffee adulteration is described. Chromatographic profiles obtained by gas chromatography/mass spectrometry (GC/MS) were used to create the chemometric model. Partial least squares (PLS) regression was employed to correlate the aroma-related chemical fingerprint to the degree of adulteration. The proposed method successfully detected fraud down to 1% (w/w) of adulterant and accurately determined the degree of coffee adulteration (i.e, root mean square error of calibration and prediction of 0.54% and 0.83% (w/w), respectively). Finally, important aroma-related compounds including furans, methoxyphenols, pyrazines, and ketones were identified.
Asunto(s)
Coffea/química , Tecnología de Alimentos/métodos , Cromatografía de Gases y Espectrometría de Masas , Líquidos Iónicos/química , Microextracción en Fase Sólida , Calidad de los Alimentos , Polímeros/química , Análisis de RegresiónRESUMEN
In this study, a series of ionic liquids (ILs) are evaluated as stationary phases in comprehensive two-dimensional gas chromatography (GC × GC) for the separation of aliphatic hydrocarbons from kerosene. IL-based stationary phases were carefully designed to evaluate the role of cavity formation/dispersive interaction on the chromatographic retention of nonpolar analytes by GC × GC. The maximum allowable operating temperature (MAOT) of the IL-based columns was compared to that of commercial IL-based columns. Evaluation of the solvation characteristics of GC columns guided the selection of the best performing IL-based stationary phases for the resolution of aliphatic hydrocarbons, namely, trihexyl(tetradecyl)phosphonium tetrachloroferrate ([P66614][FeCl4]) and trihexyl(tetradecyl)phosphonium tris(pentafluoroethyl)trifluorophosphate ([P66614][FAP]) ILs. The best performing [P66614][FeCl4] IL-based column exhibited a MAOT of 320 °C, higher than the commercial SUPELCOWAX 10 (MAOT of 280 °C) and commercial IL-based columns (MAOT up to 300 °C). The structurally tuned [P66614][FeCl4] IL stationary phase exhibited improved separation of aliphatic hydrocarbons by GC × GC compared to the commercial columns examined (e.g., OV-1701, SUPELCOWAX 10, SLB-IL60, SLB-IL100, and SLB-IL111).
RESUMEN
Combining qualitative data from the chromatographic structure of 2-D gas chromatography with flame ionization detection (GC×GC-FID) and that from gas chromatography-mass spectrometry (GC/MS) should result in a more accurate assignment of the peak identities than the simple analysis by GC/MS, where coelution of analytes is unavoidable in highly complex samples (rendering spectra unsuitable for qualitative purposes) or for compounds in very low concentrations. Using data from GC×GC-FID combined with GC/MS can reveal coelutions that were not detected by mass spectra deconvolution software. In addition, some compounds can be identified according to the structure of the GC×GC-FID chromatogram. In this article, the volatile fractions of fresh and dehydrated pineapple pulp were evaluated. The extraction of the volatiles was performed by dynamic headspace extraction coupled to solid-phase microextraction (DHS-SPME), a technique appropriate for slurries or solid matrices. Extracted analytes were then analyzed by GC×GC-FID and GC/MS. The results obtained using both techniques were combined to improve compound identifications.