RESUMEN
Objective: The purpose of this study was to evaluate the immunohistochemical effect of hyaluronic acid (HA) on the mineralization rate of the reparative dentin when it is used as a mixing medium with mineral trioxide aggregate (MTA). Materials and Methods: Direct pulp capping (DPC) was performed on 90 teeth from 10 dogs that had been experimentally exposed. The exposed pulps were divided into three groups according to the mixing medium with MTA: Group I: MTA + distilled water (control group), Group II: MTA + hybrid cooperative complex HA (HCC-HA), Group III: MTA + high molecular weight HA (HMW-HA). After pulp capping, all cavities were restored with final restoration. The dogs were divided randomly into five groups (two dogs each) according to the evaluation periods (7, 14, 21, 30, and 60) days. At the end of the study, the dogs were euthanized, and the sampled teeth were processed for immunohistochemical investigation. Results: Both types of HA (HCC-HA, HMW-HA) showed an increase in the expression of alkaline phosphatase (ALP) at a higher rate than using distilled water with MTA. Conclusions: Within the limitations of this study, HA proved to be an effective additive to MTA for DPC.
RESUMEN
Aim: To enhance mineral trioxide aggregate high plasticity (MTA HP), a commonly used dental calcium silicate cement, by incorporating selenium nanoparticles (SeNPs) known for their antioxidant and anti-inflammatory properties. The objectives included investigating the impact of SeNPs on the setting time and chemical properties of MTA HP. Materials and Methods: We performed a comprehensive study to formulate and profile SeNPs integrated into MTA HP. Diverse concentrations of SeNPs were introduced into MTA HP, and the commencement and culmination of the setting process were gauged employing a Gillmore needle cabinet. The chemical composition was validated using Fourier transform infrared spectroscopy with attenuated total reflectance and X-ray diffraction analysis. Results: The incorporation of SeNPs led to remarkable improvements. Notably, SeNPs positively affected the setting time of MTA HP, with faster setting times corresponding to higher SeNPs concentrations. Chemical analyses confirmed the successful integration of SeNPs with MTA HP. These enhancements make the material may be suitable for dental applications, especially due to its accelerated setting time. Conclusions: MTA HP incorporated with SeNPs represents a significant advancement in dental materials. Its faster setting time, combined with the antioxidant and anti-inflammatory properties of selenium, provides dental professionals with an efficient and time-saving option for complex treatments. This novel nanomaterial holds promise for improving dental procedures and patient outcomes.
RESUMEN
MATERIALS AND METHOD: Mineral trioxide aggregate (MTA) has many clinical applications in dentistry; the main drawback is the long setting. The main objective is to investigate and compare the chemical effect of using two commercially available hyaluronic acid hydrogels (HA) instead of distilled water for mixing MTA as an accelerant of setting time. Test materials were divided into three groups; Group 1: (control) mixing MTA with distilled water supplied by the manufacturer; Group 2: mixing MTA with a hybrid cooperative complex of high and low molecular weight HA (Profhilo®); Group 3: mixing MTA with High molecular weight / non-cross-linked HA (Jalupro®). Mixing time, and setting time (initial and final) were determined, Fourier-transform infrared spectroscopy, Energy-dispersive X-ray spectroscopy, Field emission Scanning Electron Microscopy, and X-ray diffraction were performed. RESULTS: mixing time, initial, and final setting time for (MTA + HA) groups were significantly different and lower in comparison to the control group (p < 0.05). This study revealed higher expression of calcium silicate hydrate and calcium hydroxide expression with higher Ca release in the MTA + HA group than the control group. CONCLUSION: commercially available HA demonstrated better chemical properties when used as a mixing medium for MTA. The Mixing and setting time for MTA + HA group were significantly shorter than those of the control group were. Thus, commercially available HA can be used as a mixing medium for MTA.
Asunto(s)
Ácido Hialurónico , Óxidos , Óxidos/química , Compuestos de Aluminio/química , Combinación de Medicamentos , Compuestos de Calcio/química , Minerales , Silicatos/química , Microscopía Electrónica de Rastreo , Agua/química , Ensayo de MaterialesRESUMEN
Abstract Mineral trioxide aggregate (MTA) has many clinical applications in dentistry; the main drawback is the long setting. The main objective is to investigate and compare the chemical effect of using two commercially available hyaluronic acid hydrogels (HA) instead of distilled water for mixing MTA as an accelerant of setting time. Materials and method: Test materials were divided into three groups; Group 1: (control) mixing MTA with distilled water supplied by the manufacturer; Group 2: mixing MTA with a hybrid cooperative complex of high and low molecular weight HA (Profhilo®); Group 3: mixing MTA with High molecular weight / non-cross-linked HA (Jalupro®). Mixing time, and setting time (initial and final) were determined, Fourier-transform infrared spectroscopy, Energy-dispersive X-ray spectroscopy, Field emission Scanning Electron Microscopy, and X-ray diffraction were performed. Results: mixing time, initial, and final setting time for (MTA + HA) groups were significantly different and lower in comparison to the control group (p < 0.05). This study revealed higher expression of calcium silicate hydrate and calcium hydroxide expression with higher Ca release in the MTA + HA group than the control group. Conclusion: commercially available HA demonstrated better chemical properties when used as a mixing medium for MTA. The Mixing and setting time for MTA + HA group were significantly shorter than those of the control group were. Thus, commercially available HA can be used as a mixing medium for MTA.
Resumo O agregado de trióxido mineral (MTA) tem muitas aplicações clínicas em odontologia, mas a principal desvantagem é a longa presa. O objetivo principal é investigar e comparar o efeito químico do uso de dois hidrogéis de ácido hialurônico (HA) disponíveis comercialmente em vez de água destilada para misturar o MTA como um acelerador do tempo de presa. Materiais e método: Os materiais de teste foram divididos em três grupos: Grupo 1: (controle) misturando o MTA com água destilada fornecida pelo fabricante; Grupo 2: misturando o MTA com um complexo cooperativo híbrido de HA de alto e baixo peso molecular (Profhilo®); Grupo 3: misturando o MTA com HA de alto peso molecular/não reticulado (Jalupro®). Foram determinados o tempo de mistura e o tempo de presa (inicial e final), a espectroscopia de infravermelho com transformada de Fourier, a espectroscopia de raios X com dispersão de energia, a microscopia eletrônica de varredura com emissão de campo e a difração de raios X. Resultados: o tempo de mistura, o tempo de presa inicial e final dos grupos (MTA + HA) foram significativamente diferentes e menores em comparação com o grupo de controle (p < 0,05). Esse estudo revelou maior expressão de silicato de cálcio hidratado e expressão de hidróxido de cálcio com maior liberação de Ca no grupo MTA + HA do que no grupo de controle. Conclusão: a HA disponível comercialmente demonstrou melhores propriedades químicas quando usada como meio de mistura para o MTA. O tempo de mistura e de presa do grupo MTA + HA foi significativamente menor do que o do grupo de controle. Portanto, a HA disponível comercialmente pode ser usada como meio de mistura para o MTA.
RESUMEN
OBJECTIVES: Mechanical properties are cardinal for the long-term clinical success of laminate veneer restorations but the selection of new restorative materials should ideally be based on clinical evidence, therefore, in vitro testing of dental materials is a good alternative to evaluate their properties and understand their behavior so this study aimed to compare and evaluate the effect of two different thicknesses and yttria percentage on the fracture resistance of laminate veneer zirconia restorations. MATERIALS AND METHODS: Forty laminate veneer restoration prepared from partial sintering zirconia of 3Y (yttria), 5Y (yttria), combined 3Y&5Y (yttria), and lithium disilicate. Specimens were assigned into four main groups according to their percentage of yttria content (n = 10) and subgrouped into two thicknesses (0.5 mm thickness and 0.3 mm thickness) (n = 5) as follows: Group I, II, III, and IV (Group I for lithium disilicate (control), Group II for 3Y zirconia, Group III for 5Y zirconia, and Group IV for combined 3Y&5Y zirconia), each of them subdivided according to their thickness into two subgroups (n = 5 for each one) and resistance to fracture for each restoration was evaluated using a universal testing machine. Data were analyzed using a one-way analysis of variance and Duncan's tests at a 5% level of significance. RESULTS: The thickness of laminate veneer restoration significantly affects the fracture resistance value of all type of laminate veneers restorations (fracture resistance mean value was highest for 0.5 mm thickness and lower for 0.3 mm thickness restorations) and yttria percentage significantly affect fracture resistance value of zirconia laminate veneer restorations (fracture resistance mean value was highest for 0.5 mm thickness of 3Y zirconia [865 N] and combined 3Y&5Y zirconia [846 N]). CONCLUSIONS: Reducing the thickness of laminate zirconia veneer restorations to 0.3 mm reduces its fracture resistance and increasing yttria percentage had an adverse effect on fracture resistance of zirconia laminate veneer restorations.
Asunto(s)
Circonio , Análisis del Estrés Dental , Ensayo de MaterialesRESUMEN
Objectives: The aim of this study was to evaluate chemical and topographical changes in the intaglio zirconia surface induced by chemical conditioning solutions using FTIR and SEM analysis. Material and method: twelve plates for each FTIR and SEM tests from each zirconia materials (UPCERA HT White, BruxZir® Solid Zirconia, and Copran® Multilayer), milled by a Yenadent CAD/CAM system, sintered and divided randomly into a three groups. A different surface conditioning was applied to the intaglio surface of each group: 30% hydrogen peroxide, 30% citric acid and control group. Result and discussion: by using of the FTIR spectroscopy, an evidence of new bands formation appeared at 1637cm-1 and 3352cm-1 due to the high oxidizing effect of hydrogen peroxide, and at 630cm-1 and 1663cm-1 due to the chelating action of citric acid, and simultaneously, SEM assessment of the surface topography took place, to identify lines, scratches, or surface dissociation that appeared on the intaglio zirconia surface after conditioning. Conclusion: such analysis provides an enhancement of new convenient, less expensive, reliable trials to improve micro-bond strength of luting cement to Y-TZP ceramics.