Choice of fusion proteins, expression host, and analytics solves difficult-to-produce protein challenges in discovery research.

High quality biological reagents are a prerequisite for pharmacological research. Herein a protein production screening approach, including quality assessment methods, for protein-based discovery research is presented. Trends from 2895 expression constructs representing 253 proteins screened in mammalian and bacterial hosts-91% of which are successfully expressed and purified-are discussed. Mammalian expression combined with the use of solubility-promoting fusion proteins is deemed suitable for most targets. Furthermore, cases utilizing stable cell line generation and choice of fusion protein for higher yield and quality of difficult-to-produce proteins (Leucine-rich repeat-containing G-protein coupled receptor 4 (LGR4) and Neurturin) are presented and discussed. In the case of Neurturin, choice of fusion protein impacted the target binding 80-fold. These results highlight the need for exploration of construct designs and careful Quality Control (QC) of difficult-to-produce protein reagents.

Reelin is modulated by diet-induced obesity and has direct actions on arcuate proopiomelanocortin neurons.

OBJECTIVE: Reelin (RELN) is a large glycoprotein involved in synapse maturation and neuronal organization throughout development. Deficits in RELN signaling contribute to multiple psychological disorders, such as autism spectrum disorder, schizophrenia, and bipolar disorder. Nutritional stress alters RELN expression in brain regions associated with these disorders; however, the involvement of RELN in the neural circuits involved in energy metabolism is unknown. The RELN receptors apolipoprotein E receptor 2 (ApoER2) and very low-density lipoprotein receptor (VLDLR) are involved in lipid metabolism and expressed in the hypothalamus. Here we explored the involvement of RELN in hypothalamic signaling and the impact of diet-induced obesity (DIO) on this system. METHODS: Adult male mice were fed a chow diet or maintained on a high-fat diet (HFD) for 12-16 weeks. HFD-fed DIO mice exhibited decreased ApoER2 and VLDLR expression and increased RELN protein in the hypothalamus. Electrophysiology was used to determine the mechanism by which the central fragment of RELN (CF-RELN) acts on arcuate nucleus (ARH) satiety-promoting proopiomelanocortin (POMC) neurons and the impact of DIO on this circuitry. RESULTS: CF-RELN exhibited heterogeneous presynaptic actions on inhibitory inputs onto ARH-POMC-EGFP neurons and consistent postsynaptic actions. Additionally, central administration of CF-RELN caused a significant increase in ARH c-Fos expression and an acute decrease in food intake and body weight. CONCLUSIONS: We conclude that RELN signaling is modulated by diet, that RELN is involved in synaptic signaling onto ARH-POMC neurons, and that altering central CF-RELN levels can impact food intake and body weight.

RNA-aptamers-in-droplets (RAPID) high-throughput screening for secretory phenotypes.

Synthetic biology and metabolic engineering seek to re-engineer microbes into "living foundries" for the production of high value chemicals. Through a "design-build-test" cycle paradigm, massive libraries of genetically engineered microbes can be constructed and tested for metabolite overproduction and secretion. However, library generation capacity outpaces the rate of high-throughput testing and screening. Well plate assays are flexible but with limited throughput, whereas droplet microfluidic techniques are ultrahigh-throughput but require a custom assay for each target. Here we present RNA-aptamers-in-droplets (RAPID), a method that greatly expands the generality of ultrahigh-throughput microfluidic screening. Using aptamers, we transduce extracellular product titer into fluorescence, allowing ultrahigh-throughput screening of millions of variants. We demonstrate the RAPID approach by enhancing production of tyrosine and secretion of a recombinant protein in Saccharomyces cerevisiae by up to 28- and 3-fold, respectively. Aptamers-in-droplets affords a general approach for evolving microbes to synthesize and secrete value-added chemicals.Screening libraries of genetically engineered microbes for secreted products is limited by the available assay throughput. Here the authors combine aptamer-based fluorescent detection with droplet microfluidics to achieve high throughput screening of yeast strains engineered for enhanced tyrosine or streptavidin production.

Elastin-like Polypeptide Diblock Copolymers Self-Assemble into Weak Micelles.

The self-assembly of synthetic diblock copolymers has been extensively studied experimentally and theoretically. In contrast, self-assembly of polypeptide diblock copolymers has so far been mostly studied experimentally. We discovered that the theory developed for synthetic diblock copolymer does not fully explain the self-assembly of elastin-like polypeptide diblock copolymers, leading us to generalize the theory to make it applicable for these polypeptides. We demonstrated that elastin-like polypeptide diblocks self-assemble into weak micelles with dense cores and almost unstretched coronas, a state not previously observed for synthetic diblock copolymers. Weak micelles form if the surface tension at the core-corona interface is low compared to that expected of a micelle with a dense core. The predictions of the theory of weak micelles for the critical micelle temperature, hydrodynamic radius, and aggregation number of elastin-like polypeptide diblocks are in reasonable agreement with the experimentally measured values. The unique and unprecedented control of amphiphilicity in these recombinant peptide polymers reveals a new micellar state that has not been previously observed in synthetic diblock copolymer systems.

Non-chromatographic purification of recombinant elastin-like polypeptides and their fusions with peptides and proteins from Escherichia coli.

Elastin-like polypeptides are repetitive biopolymers that exhibit a lower critical solution temperature phase transition behavior, existing as soluble unimers below a characteristic transition temperature and aggregating into micron-scale coacervates above their transition temperature. The design of elastin-like polypeptides at the genetic level permits precise control of their sequence and length, which dictates their thermal properties. Elastin-like polypeptides are used in a variety of applications including biosensing, tissue engineering, and drug delivery, where the transition temperature and biopolymer architecture of the ELP can be tuned for the specific application of interest. Furthermore, the lower critical solution temperature phase transition behavior of elastin-like polypeptides allows their purification by their thermal response, such that their selective coacervation and resolubilization allows the removal of both soluble and insoluble contaminants following expression in Escherichia coli. This approach can be used for the purification of elastin-like polypeptides alone or as a purification tool for peptide or protein fusions where recombinant peptides or proteins genetically appended to elastin-like polypeptide tags can be purified without chromatography. This protocol describes the purification of elastin-like polypeptides and their peptide or protein fusions and discusses basic characterization techniques to assess the thermal behavior of pure elastin-like polypeptide products.

Hydration layer coupling and cooperativity in phase behavior of stimulus responsive peptide polymers.

It is shown that hydrophilic (backbone) and hydrophobic (side chain) hydration layers of elastin-like polypeptides (ELPs), a class of stimulus responsive peptide polymers that exhibit lower critical solution temperature (LCST) phase transition behavior, can exist in a coupled and decoupled state. The decoupled hydration state consists of hydrophobic and hydrophilic hydration layers that respond independently to temperature, while the coupled hydration state is characterized by a common, cooperative dehydration of both hydration layers. It is further shown that the primary sequence of an ELP can be tuned to exhibit either of the hydration layer coupling modes. Charged side chains lead to decoupling, while strongly hydrophobic side chains trigger stronger interaction between hydrophilic and hydrophobic hydration, leading to coupling of both layers. Further, for aprotic residues this coupling is fostered by decreasing bulkiness of hydrophobic side chains due to larger hydration numbers and water molecules mediating coupling between side chain and backbone hydration shells. For coupled hydration shells, the LCST phase transition characterized by spin probing continuous wave electron paramagnetic resonance spectroscopy is reminiscent of a first-order process even on nanoscopic length scales. In contrast, analogous synthetic polymers exhibit nanoscale phase transitions over a broad temperature range, indicating that their nanoscale phase behavior is not of first order. Hence, our results indicate that ELPs are the first identified class of polymers that exhibit a first-order inverse phase transition on nanoscopic length scales. These results may also provide insights into the role of hydration layers in governing the structure-function relationship of intrinsically disordered proteins.

Calcium binding peptide motifs from calmodulin confer divalent ion selectivity to elastin-like polypeptides.

Calcium-sensitive elastin-like polypeptides (CELPs) were synthesized by periodically interspersing a calcium-binding peptide sequence from calmodulin within an elastin-like polypeptide (ELP) with the goal of creating thermal and calcium responsive peptide polymers. The CELPs exhibit high sensitivity to calcium compared to monovalent cations but do not exhibit the exquisite selectivity for calcium over other divalent cations, such as magnesium, that is displayed by calmodulin. The CELPs were further used as a building block for the synthesis of calcium-sensitive nanoparticles by fusing a hydrophilic, noncalcium-sensitive ELP block with a CELP block that becomes more hydrophobic upon calcium binding. We show that addition of calcium at concentrations between 50 and 500 mM imparts sufficient amphiphilicity to the diblock polypeptide between 33 and 46 °C to trigger its self-assembly into monodisperse spherical micelles with a hydrodynamic radius of ∼50 nm.

Predicting transition temperatures of elastin-like polypeptide fusion proteins.

Elastin-like polypeptides (ELPs) are thermally sensitive peptide polymers that undergo thermally triggered phase separation and this behavior is imparted to soluble proteins when they are fused to an ELP. The transition temperature of the ELP fusion protein is observed to be different than that of a free ELP, indicating that the surface properties of the fused protein modulate the thermal behavior of ELPs. Understanding this effect is important for the rational design of applications that exploit the phase transition behavior of ELP fusion proteins. We had previously developed a biophysical model that explained the effect of hydrophobic proteins on depressing the transition temperature of ELP fusion proteins relative to free ELP. Here, we extend the model to elucidate the effect of hydrophilic proteins on the thermal behavior of ELP fusion proteins. A linear correlation was found between overall residue composition of accessible protein surface weighted by a characteristic transition temperature for each residue and the difference in transition temperatures between the ELP protein fusion and the corresponding free ELP. In breaking down the contribution of residues to polar, nonpolar, and charged, the model revealed that charged residues are the most important parameter in altering the transition temperature of an ELP fusion relative to the free ELP.

Unexpected multivalent display of proteins by temperature triggered self-assembly of elastin-like polypeptide block copolymers.

We report herein the unexpected temperature triggered self-assembly of proteins fused to thermally responsive elastin-like polypeptides (ELPs) into spherical micelles. A set of six ELP block copolymers (ELP(BC)) differing in hydrophilic and hydrophobic block lengths were genetically fused to two single domain proteins, thioredoxin (Trx) and a fibronectin type III domain (Fn3) that binds the α(v)ß(3) integrin. The self-assembly of these protein-ELP(BC) fusions as a function of temperature was investigated by UV spectroscopy, light scattering, and cryo-TEM. Self-assembly of the ELP(BC) was unexpectedly retained upon fusion to the two proteins, resulting in the formation of spherical micelles with a hydrodynamic radius that ranged from 24 to 37 nm, depending on the protein and ELP(BC). Cryo-TEM images confirmed the formation of spherical particles with a size that was consistent with that measured by light scattering. The bioactivity of Fn3 was retained when presented by the ELP(BC) micelles, as indicated by the enhanced uptake of the Fn3-decorated ELP(BC) micelles in comparison to the unimer by cells that overexpress the α(v)ß(3) integrin. The fusion of single domain proteins to ELP(BC)s may provide a ubiquitous platform for the multivalent presentation of proteins.

Triple stimulus-responsive polypeptide nanoparticles that enhance intratumoral spatial distribution.

To address the limited tumor penetration of nanoparticle drug delivery vehicles, we report the first pH-responsive polypeptide micelle that dissociates at the low extracellular pH of solid tumors. This histidine-rich elastin-like polypeptide block copolymer self-assembles at 37 °C into spherical micelles that are stabilized by Zn(2+) and are disrupted as the pH drops from 7.4 to 6.4. These pH-sensitive micelles demonstrate better in vivo penetration and distribution in tumors than a pH-insensitive control.

Fusions of elastin-like polypeptides to pharmaceutical proteins.

Elastin-like polypeptides (ELPs) are a class of stimulus-responsive biopolymers whose physicochemical properties and biocompatibility are particularly suitable for in vivo applications, such as drug delivery and tissue engineering. The lower critical solution temperature (LCST) behavior of ELPs allows them to be utilized as soluble macromolecules below their LCST, or as self-assembled nanoscale particles such as micelles, micron-scale coacervates, or viscous gels above their LCST, depending on the ELP architecture. As each ELP sequence is specified at its genetic level, functionalization of an ELP with peptides and proteins is simple to accomplish by the fusion of a gene encoding an ELP with that of the peptide or protein of interest. Protein ELP fusions, where the appended protein serves a therapeutic or targeting function, are suitable for applications in which the ELP can improve the systemic pharmacokinetics and biodistribution of the protein, or can be used as an injectable depot for sustained, local protein delivery. Here we describe considerations in the design of therapeutic protein ELP fusions and provide details of their gene design, expression, and purification.

Elastin-like polypeptides as a purification tag for recombinant proteins.

This unit presents a recombinant protein purification method that employs an elastin-like polypeptide (ELP) as a purification tag. ELPs undergo a sharp and reversible phase transition when heated above their lower critical solution temperature. ELPs retain this behavior when they are fused to a protein, and thereby provide a simple method to isolate a recombinant ELP fusion protein from cell contaminants by cycling the solution through the insoluble and soluble phase of the ELP fusion protein using a procedure that is termed Inverse Transition Cycling. This method does not require the use of chromatography, so it is cost-effective, easy to scale up, and easy to multiplex.